Navigation for the dropdown arrows

Similar Questions

• Navigation for the AVG firewall Windows XP - network sharing and occasionally be blocked due to uknown UDP outgoing local traffic remotely different ports... Repeatedly enters FilterDevice in the firewall log

  Various involved Ports:
  Local: 257 remotely: 513
  Local: 513 remotely: 6146
  I also saw port 259 and a few others...
  The firewall settings work for various other users, but seem to don't like is not something in my configuration.

  As a member of a domain running Windows XP Pro SP3
  When it blocks the traffic, they are always directed to a remote IP address of a domain within my local network controller. I uninstalled a lot of applications, and made sure I have no services for unix/linux installed.  For a bit, I thought he may have something for security certificates because my computer and user accounts are configured with our local CA... I doubt, however, that is related...

  I also know that my domain name is not the configuration as tight as we would like to see because we had to reduce some of the security settings for old Windows 98 and AS / 400 systems.  So I remember an old key "reg" which might not help:
  Location: HKLM\System\CurrentControlSet\Services\lanmanworkstation
  \Parameters
  Key: enablesecuritysignature
  Initial value: 0
  New value: 1
  This changed seemed to help but then after another it reboot started appearing again...

  Amaranth Hello,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the area and would be better suited to the TechNet Forums community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 8 when I move my mouse in the lower left corner of the upper part of the Bureau of navigation for the start page icon is not displayed

  Windows 8 does someone knows how to get the icon to navigate to the start page?  When I move my mouse in the lower left of the Office start page navigation icon does not appear.  All of a sudden it stopped working.

  Hello

  May I ask if clicking on the lower left corner always takes you back to the menu back? Or is that the disabled also?
  You might want to try this:
  1. Press the Windows key, then type "cmd", right mouse click on command prompt, then click "Run as Administrator". If you are prompted by user account control, just accept.
  2. At the command prompt with admin, type privileges window ' sfc/scannow ' or ' sfc/scannow ' also works. And then press enter.
  3. Wait a few moments so he can analyze the system files, you may need to restart then.

  Please let me know if it works. I hope this has helped.

• Hierarchical navigation for the image gallery?

  I am trying to create an image gallery of six buildings that users navigate by clicking on the buttons on a map of London. I have two pictures of each of the six buildings. I would like to cycle or cross-fade two images for each of the buildings when users click a button on the map.

  I can get every button on the map for a link to an image - I can't have images to navigate or fade in their separate group once they have done this.
  
  Is this possible? I'm relatively new to Fireworks and have tried to use symbols, States, and layers, but have not been able to find a solution (maybe it's that I'm missing something).
  
  Thanks in advance!

  Ok. Create an animation of each picture you want to fade and export it as an animation, you need to do is at the same time. Once you have done this, you can specify animation as image to change in the wizard of Image of Swap. To "Display the image exchanged", choose the Image file and navigate to the location of the registered animated version. Note that the file size of your end for this project will be prohibitive if create you it that way. I strongly suggest you do instead in Adobe Flash.

  

• Could not load the navigation for subject area? What does this error mean

  When I run the overall consistency check in my RPD. I get this error.
  Could not load the navigation for the business area.
  Source of the dimensional table has no column mapping.
  -What it means and how should I solve this problem?

  Hi friend

  Check if you have correctly joined on LTS (joins between the source tables: facts and dimensions). If you do not have joins on LTS you must create it.

  And also check if the BMML table columns are mapped to the correct table (propierties of each source table and select the tab "column mapping").

  Kind regards.

  Published by: Hammett81 on December 3, 2010 10:10

• My toolbar disappeared completely. I still have the back arrows on the far left, but everything else is just... gone. I tried Firefox to stop and restart several times, but nothing does not change. All toolbars are checked in the view menu.

  July 13, 2010: My Firefox toolbar has suddenly disappeared, except for the back arrows on the left side. I tried Firefox stop and start several times, but nothing has changed. All toolbars are selected in the view menu... but nothing is visible!

  See the Navigation buttons such as back, home, bookmarks and recharge are missing

• Change default model navigation in the portal generator

  Hello

  I develop a portal 11.1.1.8 Webcenter portal using the portal generator. I created a new Navigation model.  Now, I want to assign as the model of default navigation for the portal, I had created.

  When I go to the link to Administration-> settings, Navigation is not editable. Other things like Page Template, Skins etc can be changed. Is there a way I can change the value by default model of Navigation for my portal?

  According to the link here: http://docs.oracle.com/cd/E29542_01/doc.1111/e27603/portadv_admin.htm#CHDDEIIA

  The navigation model for a particular site cannot be changed after creation. Instead, we can change the default Navigation model based on our needs.

• Keyboard shortcuts for the back and forward navigation arrows

  I really * really * wish that there are keyboard shortcuts for the back and the navigation arrows forward (in the black bar above the film, used to navigate in the recent files, collections etc.). It's really something that I use a lot and these arrows are small

  I think you may have missed this help:

  

• Showing the letters highlighted for the keyboard navigation in vista ultimate.

  How display the letters highlighted for the keyboard navigation in Vista view ultimate permanently as you could in XP pro, (display properties - effects - uncheck to hide a letter underlined for the keyboard navigation up to what the alt key).

  In vista, you can show them with the ALT but that works only for the top pull down for menus not on the right button of the mouse popup menus.

  Hi 3DPC27,

  Welcome to Microsoft Answers Forums.

  By pressing the keys corresponding to the letters highlighted in the menus, commands, or options dialog box, you can quickly select options using the keyboard rather that the mouse. If they are not already displayed, you can choose to show the letters highlighted for the keyboard navigation and input (rectangles dotted around objects) indicators to navigate in Windows, generally with the ALT, TAB, or arrow keys.

  Note access keys and keyboard shortcuts
  http://www.Microsoft.com/enable/training/windowsvista/accesskeys.aspx

  You can adjust these settings on the brand the easier to use page in the accessibility of the keyboard.

  1. open the brand of the keyboard easier to use page by clicking the Start button, clicking Control Panel, on ease of access, clicking Ease of Access Center, and then click make the keyboard easier to use.

  Facilitate the use of the keyboard
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-keyboard-easier-to-use

  Make your computer easier to use
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-your-computer-easier-to-use

  Transcript to make the keyboard easier to use demo
  http://www.Microsoft.com/enable/demos/windowsvista/trans_keyboard.aspx

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Navigation in the form with the arrows or keys of planning tab

  Hello

  We have some users who are frustrated with navigation in the planning forms in 11.1.2.3.  That's what I've noticed, and I would like to know if this is the way in which planning is supposed to work, or if we have bugs.  Our browser is IE 8, but we get the same behavior in Mozilla.

  1. we can use the arrow keys and move in all directions, but cannot change the cell, unless you click with the mouse.  In edit mode, we can not arrow out.

  2. we can tab from cell to cell, modify the data and tab on.  If we tab in a read-only column, we are blocked and cannot tab out.

  I don't like logging SRs for that sort of thing, but the support guys, I'm supposed to challenge such things.  It might be something wrong with our implementation.  Is this normal and EXPECTED?

  Thank you, Kevin

  This was noted as a known issue in Bug 17282780 : INTERNET EXPLORER - SHAPE CELL cannot BE OUT WITH KEYS, CURSOR, TAB or ENTER

  This problem is caused by the introduced interface 11.1.2.2 ADF go. Oracle Dev still working on this issue.

  HTH-
  Jasmine

• I have a scooter that can not go on the road. It is a navigation problem for cards from Apple and Google Maps for the watch. Does anyone have a solution?

  Hello

  I recently got a scooter that goes from a maximum of 40 mph and cannot legally go on the highways. I was worried about navigation on the thing, since I can't hear my phone, but I thought the directions can get sent to my watch. My problem is that Google Maps can really follow the navigation on the watch, so I can still see the signs when I put my wrist; still, he turns back to the lock screen. So I stop, remove my gloves, and pull up the directions. On the other hand, Apple cards can't do navigation for bicycles or avoiding the road. I tried to use cards of Apple walking directions, thinking I can correct errors on one-way streets myself, but Siri decided I was going too fast, spent my navigation to drive and tried to send me on the highway.

  Anyone has a solution, or am I better off memorizing the card before entering the thing?

  Thank you!

  Hello

  To have your watch to return to the last used app to raise your wrist:

  -On your iPhone, in the application of Eve, go to: Watch My > General > screen Wake > under the heading "Raise the wrist", choose the RESUME last activity.

  If we consider how you could use your watch, note the safety information important in the Apple Watch user's Guide, which includes sections headed Distraction and Navigation:

  https://help.Apple.com/watch/#/apdcf2ff54e9

• What did you do for Firefox? I don't have the left arrow key or arrow - I can't type in the url box - Firefox has suddenly become USELESS!

  I clicked on 'Customize' as you suggest, am the arrows and the area url, you click on ok, and everything is back to what I had already. I know, except for a really quick fix, I have to go back to IE.

  Hello

  I'm a bit confused. Your title says
  

  What did you do for Firefox? I don't have the left arrow key or arrow - I can't type in the url box - Firefox has suddenly become USELESS!

  Yet your said OP
  

  Click on 'Customize' as you suggest, am the arrows and the area url, you click on ok, and everything is back to what I had already. I know, except for a really quick fix, I have to go back to IE.

  Your problem is resolved or not?

  Right-click on an empty space in the toolbar, then click Customize, then click restore default value

• How to change the sort order of the items sought for the last element of this research first. I DON'T want to say the order search engines, but the existing research by arrow down

  I want to be able to change the sort order of the items, I already looked in the search box. I want to be able to hit the arrow key down and see my previous searches in order of last search showing the first. For the moment, I don't know how it is sorting and it is very annoying to have to re - enter a query that I typed 5 minutes earlier, but because I typed in another 10 since it's lost somewhere in the list. Is it possible, I Googled, but did not find the topic anywhere. Just to clarify, I DON'T mean of the order of the search engines (which is what appears in google), I mean that the text typed into which has been registered in the drop-down list.

  Thank you

  'Form filling' uses a "frecency" algorithm, frequency + recency, similar to the list of AutoComplete address bar.

  I found an extension that seems relevant, but critics are old, so I'm not sure it's still working: Searchbar Autocomplete Order.

  But... is the AutoComplete does not? I expect that typing a few characters of the previous query would be to filter the list so that you can easily select? Or is the problem that the list does not remember quite who looking for?

• And how does one remove Christmas lights that have been offered as a decoration for the top and shifts of the screen. They tend to hide the navigation bar.

  And how one removes the Christmas lights that have been offered as a decoration for the top and bottom of the screen. They tend to hide the navigation bar. Several days ago Firefox gave the 'dress-up' in a message.

  It seems that https://addons.mozilla.org/firefox/addon/christmas-lights/ is added as an extension, but is categorized as a character (lightweight themes). Go to tools > Modules then check extensions and themes, and then uninstall it.

  Now that the status bar is now the toolbar addons that I see those that are listed are all personas and they do not affect the toolbar addons you would also find a theme, and think that it must be very confused now that I no longer able to filter topics with a Google addons research - phooey.

  Extensions can be identified with intitle: Add - ons and have changed my research of extension add-ons accordingly.

• I just download v4.0. How can I get the third arrow back button navigation, which allows the selection of a page forward or back?

  I just download v4.0. How can I get the third arrow back button navigation, which allows the selection of a page forward or back?

  Don't know how to get the exact button back (sorry) I dig around too much to do...
  But! Today, I found by chance that by clicking and holding on the back button the same box to popup in last-12-sites and you can stream on the list to return to that particular site.

  Not exactly what you (and me) tried but at least the functionality is there.

  Good luck!