Navigation in the adf part form workflow causes the validation of active in WebCenter

Similar Questions

• Navigation in the form with the arrows or keys of planning tab

  Hello

  We have some users who are frustrated with navigation in the planning forms in 11.1.2.3.  That's what I've noticed, and I would like to know if this is the way in which planning is supposed to work, or if we have bugs.  Our browser is IE 8, but we get the same behavior in Mozilla.

  1. we can use the arrow keys and move in all directions, but cannot change the cell, unless you click with the mouse.  In edit mode, we can not arrow out.

  2. we can tab from cell to cell, modify the data and tab on.  If we tab in a read-only column, we are blocked and cannot tab out.

  I don't like logging SRs for that sort of thing, but the support guys, I'm supposed to challenge such things.  It might be something wrong with our implementation.  Is this normal and EXPECTED?

  Thank you, Kevin

  This was noted as a known issue in Bug 17282780 : INTERNET EXPLORER - SHAPE CELL cannot BE OUT WITH KEYS, CURSOR, TAB or ENTER

  This problem is caused by the introduced interface 11.1.2.2 ADF go. Oracle Dev still working on this issue.

  HTH-
  Jasmine

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Navigation from the column data

  JDev ADF BC 11.1.1.5.0
  
  Is it possible to provide a navigation of the column?
  For example, I have a column named "Accounts" to my table and there a few records. Each record should appear as a hyperlink that will lead me to a page where I can see the account information in detail.

  Suppose you already have an af:table with the data in it. Change the af: inputText / af:outputText for an af:commandLink account number - you can do it in source view (you will need to remove all properties that are not valid for af:commandLink). Set the Action property to point to a rule of control flow that takes you to the detail page. (If you were on 11.1.2.x, you must apply the hotfix that Frank details in the first part of the post that I linked you - this hotfix verifies that by clicking on the order link allows the current record).

  It is literally all you should have to do.

• Error 'this computer cannot connect to a homegroup. " How can I connect my 2 parts forming a home network?

  I'm trying to connect my pc with my pc upstairs downstairs (both HP pcs. 1pc is Vista, the other is 8.1). Now, I guess I'm on the right track to connect both PC and trying to establish them as a group residential when I get to the page of the homegroup, it reads 'this computer cannot connect to a homegroup' Finally I get 'service Homegroup provider is not running.

  How can I connect my 2 parts forming a home network?

  Thank you DVSMSC I missed it - you have reason. Homegroup is introduced in Windows 7 and works in 8 / 8.1 / 10 also, but not back to Vista.

• Ignore the validation of attribute in adf levels

  Hello, I use JDeveloper 12.1.3.

  I have a simple question.

  How to ignore the validation of the attribute levels in the adf, when I pass between tabs?

  I can't use immediate = true, because then I wouldn't be able to commit the changes.

  Thank you all.

  Concerning

  You can try to make the the showRequired = true required = false and carry them out manually, validation in your beans for each of the fields that you want to be mandatory.

  I had a problem similar to yours. I think (and I said) that it is not a good practice for autoSubmit = "true" in many areas. You even not the disadvantage that if you try to change the fields too fast that they be emptied... As well, the view is suspended for a second while submitting. This should be a no-no for forms with several fields.

• adopt the validation e-mail retype in ADF

  Jdev 11.1.1.7

  I'm trying to implement the validation of email email and re entry in the form of the adf.

  My approach was carried out on the vcl 2nd e-mail box that I wrote the following:

  FacesContext facesContext = FacesContext.getCurrentInstance ();

  "String userEmail = this.input_userEmail.getValue ()! = null? this.input_userEmail.getValue () m:System.NET.SocketAddress.ToString ():" ";" "

  "String reenterUserEmail = this.input_userReenterEmail.getValue ()! = null? this.input_userReenterEmail.getValue () m:System.NET.SocketAddress.ToString ():" ";" "

  {if (userEmail.Equals (reenterUserEmail))}

  input_userReenterEmail.setInlineStyle("");

  input_userEmail.setInlineStyle("");

  } else {}

  input_userReenterEmail.setInlineStyle("background-color:Red;");

  input_userEmail.setInlineStyle ("color: Red");

  facesContext.addMessage ("NoRecordsFound", new FacesMessage (FacesMessage.SEVERITY_INFO,

  "Mails entered do not match."

  "Re enter Email'));

  facesContext.renderResponse ();

  }

  I have 2 questions here:

  1. If the emails do not match, I need to set the focus to the input of the 2nd box rather than the form component, how can I achieve that?

  2 input_userReenterEmail.setInlineStyle("background-color:Red;"); does not work (I need set the red background color), how this can be done?

  Hi Amit

  You must use the custom validator

  Blog of Ashish Awasthi (Jdev/ADF): custom in Oracle ADF (JSF Validator) validator

• Is it possible to use < af:message > to display the validation model adf instead of the default note window

  For any component input, validation that we created at the level of the entities attribute are executed and if any validation fails, the messge is displayed in a window of default note on the component of the.

  Is it possible to use < af:message > to display the validation model adf instead of the window of default note for the corresponding component in a fragemnt jsff page?

  I use JDev 11.1.1.6.0.

  Thank you

  Jean Bayard

  Michelle,

  I have good news. I was able to reproduce, locate and bypass your problem.

  The problem is the following:

  works very well in JSF pages, but it does not work in JSF fragments (which are part of a glued TaskFlow, what is included in a page parent as a ) because ADF when executing a miscalculation of the value of of 'for' - attribute when it is part of a region BTF. For example, suppose that the has id = "it1" (as it is in your JSF fragment above) and this TaskFlow defined in included as a with id = "r1" in a parent page. Then the internal ID of the input text field will be 'r1:0:it1', but at runtime, the framework will set the value of 'for' - attribute to the 'r1:it1' (which is wrong) instead of "r1:0:it1" (which is the correct value).

  You can work around this bug by specifying:

  Instead of

  in your code above. In this way the framework will make up the correct value for the 'for' - attribute at run time and will not work correctly. Don't worry the caveat against a non-existent ID in the JDev source code editor.

  You must do this trick only in fragments JSF and you should not do in JSF pages.

  Dimitar

• I have a dreamweaver CS4 - what is called the navigation in the old version?

  I have a dreamweaver CS4 - what is called the navigation in the old version?

  "Navigation" is part of HTML5 and creates a

  tagset.

  It does not exist in DWCS4. The program is too old.

• Blog of Timo Hahn regarding: treatment of images/files ADF (part 2)

  Hello everyone, especially of Timo Hahn :).
  
  I use Jdeveloper 11.1.2.3.0, ADF BC, ADF Faces, Windows 7.
  And I try to the handle/image files (download, upload, view images) of database, as explained in the post by Timo
  http://tompeez.WordPress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-2/
  
  I installed the file of commons-io - 2.4 - upload - the , but I don't know how to add it to my project of view controller.
  
  Any help is appreciated.

  Use Add jar/folder and add a few Commons-io - 2.4.jar

• Form when he passes the validation errors validatator show:

  For some reason any in this form when he submits successfully (pass validation) the mistakes of validatator show:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:Panel ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  xmlns:layouts = "" views.layouts. * ""

  creationComplete = "creationCompleteHandler (event)" "

  skinClass = "views.skins.BlueTopPanelSkinWithBlueRedGradient" title = "Log in" xmlns:parsley =" " http://www.Spicefactory.org/parsley "> "

  < s:layout >

  < s:VerticalLayout horizontalAlign = "center" verticalAlign = "middle" / >

  < / s:layout >

  < fx:Script >

  <! [CDATA]

  Import model.vo.AuthenticateUserParams;

  Import model.vo.WindowsActiveDirectoryUser;

  Import mx.collections.ArrayCollection;

  Import mx.controls.Alert;

  Import mx.events.FlexEvent;

  Import parsleyMessages.UserLoginRequest;

  [MessageDispatcher]

  [Bindable]

  public var Dispatcher: function;

  protected var validator: Array;

  protected function creationCompleteHandler(event:FlexEvent):void

  {

  validators = [usernameValidator, passwordValidator];

  }

  protected function login_clickHandler(event:MouseEvent):void

  {

  If (Validator.validateAll (validators) .length > 0)

  return;

  var params: AuthenticateUserParams = new AuthenticateUserParams();

  params. Domain = domain.selectedItem;

  params. Password = password.text;

  params. UserName = username.text;

  Dispatcher (new UserLoginRequest (params));

  clearFields();

  }

  public function clearFields (): void

  {

  username. Text = ";

  Password.Text = ";

  domain.selectedIndex = 0;

  }

  []] >

  < / fx:Script >

  < fx:Declarations >

  < mx:Validator id = "usernameValidator" property = "text" required = "true" source = "{username}" / >

  < mx:Validator id = "passwordValidator" property = "text" required = "true" source = "{password}" / >

  < parsley: Configure / >

  < / fx:Declarations >

  < s:Form >

  < s:FormItem label = "enter user name" color = "#000000" >

  < s:TextInput id = "Username" = '761' x y = "357" width = "131" text = "kisn" / >

  < / s:FormItem >

  < s:FormItem label = "Enter password" >

  < s:TextInput id = "password" x = "825" y = "142.25" width = "132" displayAsPassword = "true".

  Text = "555" / >

  < / s:FormItem >

  < s:FormItem label = "log on" >

  < s:DropDownList id = "domain" x = "825" y = "172.25" width = "132".

  dataProvider = "{new collection ArrayCollection (['HO', 'mM'])}.

  selectedIndex = "0" >

  < / s:DropDownList >

  < / s:FormItem >

  < s:FormItem width = "100%" >

  < s:Button id = "login" x = "115" width = "125" height = "31" label = "Login".

  Click = "login_clickHandler (Event)" cornerRadius = "10" fontSize = "16" "

  fontWeight = "bold" >

  < / s:Button >

  < / s:FormItem >

  < / s:Form >

  < / s:Panel >

  I think I see your problem. Except if you their so-called to do otherwise, mx:Validators will validate automatically each time that the "trigger" was even sent to the target component, this source is linked to. Since you do not specify a triggerEvent validators are tuned to the default event (i.e. for a TextInput "valueCommit" If memories are good) and validate this field whenever this event occurs. In your case, I think the culprit is this call to 'clearFields() '. This method is changing the text in the fields and causing thus the validation runs again on the now empty TextInputs (and therefore invalid).

  The easiest solution if you want to only be triggered manually your validation must set the property to "triggerEvent' of your validators to an empty string. Stop them from trigger automatically when the text is changed.

• All of a sudden is "Navigation to the webpage was canceled" on some sites.

  Description of the problem

  all of a sudden, I get the message "Navigation to the webpage was canceled" when you try to test some sites in BrowserLab: http://SPDR.me/xBdc

  Here is a list of sites that I'm having the problem with:

  • http://demo.SilverStripe.org
  • http://purplespider.co.UK
  • http://scorpiocharters.co.UK
  • http://beswitchedon.com

  Steps to recreate

  1. Open the main interface of BrowserLab.
  2. Enter http://demo.SilverStripe.org as the site to test
  3. Click on the button refresh screenshots
  • This happens every time on the sites above.
  • I use Firefox on Mac OS X 4.0.1 10.6.7, but I don't think that there is a problem at my end.

  Expected results

  I would like to see a screenshot of the site.

  Actual results

  The screenshot shows just "Navigation to the webpage was canceled": http://SPDR.me/xBdc Or when you switch to Firefox, just a white screen empty.

  More information

  • The sites load correctly when you try to access them in a web browser.
  • The thing that all these sites have in common is that they use the SilverStripe content management system.

  • I have used SilverStripe on my sites for more than a year and have never had this problem with BrowserLab until last week.

  • Other sites such as microsoft.com and bbc.co.uk load very well.

  We found the source of the problem - Silverstripe generates an incorrect HTTP header. The content-type header has the value of the character in quotes. For example,.

  content-type: text/xml; charset = "utf-8".

  is used when it should be

  content-type: text/xml; charset = utf-8

  Most modern browsers are lenient and allow the incorrect header, but BrowserLab was triggered upward by quotes. This problem surfaced recently, when BrowserLab added the ability to follow links on the screenshots. This feature we have to read and analyze the pages and you try to read a page with an unknown character caused an error to report.

  We have implemented a solution, which is to strip the quotes from the charset value. We anticipate that the fix will be deployed before the end of July.

  The problem can also be fixed if Silverstripe remove quotation marks from the content-type header.

  -Tom

• Possible to ignore certain datagrid cells when navigating with the keyboard?

  Hello

  I have some data entry forms based on a datagrid control.  Users typically use the keyboard navigation (tab, enter, etc.) when you fill in the data in the cells.  According to various criteria, some cells may not need to be filled.   I don't competely disable them... just make them ignored in the navigation to the default keyboard.

  In other words, I want to make these fields 'disabled' with a silver background (no problem here) and I want to that they be ignored when navigating by keyboard.  However, I want them to be able to enter data into these fields if they specifically click on it with the mouse (essentially a substitution).

  Make sense?  This sounds like a requirement unusual and potentially difficult to implement.  Hoping someone here can tell me how it's going to be easy

  Any suggestions it if possible and maybe some tips?

  Thank you!

  For the regular DG, you are supposed to call preventDefault on ITEM_EDIT_BEGINNING and editedItemPosition to a new position of the cell.  I think that works for ADG, but I could be wrong.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• my web site does not load the bar of navigation on the site, but the fact on all other browseres!

  www.funfactorypartyrentals.com a few days ago the site as working perfectly on firefox now however the navigation between the logo one bar the row of photos does not appear on one of the cables pages it indexes to all others he will ignore this line of code or something is blocking, I'm tired everthng to solve the problem, but nothing seems to work.

  It is not a problem with the font-size rules.

  See line 102 of the http://www.funfactorypartyrentals.com/ffpr.css

  It's the font-size-adjust rule.

• How to create navigation of the action bar on the right side.

  Hello

  Is there anyway to create the navigation of the action bar on the right side. I see a camera application can use it.

  MAZ

  I don't think that there are standard control that does this.

  You can create a container with DispositionAbsolue and place it outside the screen. LayoutUpdateHandler attached to the main container to obtain its dimensions. The second container "abscissa" can be set to the width of the main container, so it will be off the screen. Visibility of the initially fixed false container.

  When the button is pressed, show the container and drag it into the screen with animation.

  The container can contain any content, for example ListView with required components.

  It's just an idea, I have not implemented this specific scenario.