Connection WAP54G optics and fiber
Switch used DSL Westell Modem - Linksys - WAP54G and everything worked well. Changed to fiber optical fiber directly to the switch connected to ethernet and Internet services provider. Ethernet network works fine but can not access the WAP54G. Laptops see the WiFi, but local only.
Should the WAP55G or ethernet fiber (or not) use the uplink Port #6 port?
As you change the DSL ISP to optical fiber, you need to change the ip address of the WAP in the range of fiber optics ip.
Also affect the gateway on the WAP even from the optical fiber.
Tags: Linksys Routers
Similar Questions
-
can I use both optical and fiber sfp modules?
Hello
I have 2 stacked 3548 P PowerConnect switches. The top switch got uplink fiber of 1 MM (G1) to another switch in a different building. If the top switch has 1 free uplink port and the lower 2 switch free uplink ports. Recently, we bought 2 servers Poweredge R620 and I would like to connect them to the Gigabit ports. The 'normal' switch ports allow only 100 Mbit/s, so I plan to buy 2 modules SFP 1000Base-T (for copper) to connect to them.
Is this feasible? Can I use G2 on the top switch for SFP 1000Base-1 T? Is this allowed?
Kind regards
Erik
Yes, it's quite feasible. The connection will be configurable the same 100 Mbps ports. Here is a link to the part number for the 1000Base-T transceiver.
See you soon
-
I want to connect a keyboard and a mouse to a work of will the Microsoft Wireless Optical Desktop 1000 Wii?
Hello
The Microsoft Wireless Optical Desktop 1000 offers freedom wireless and access touch to web and email facilities. RF wireless functionality gives you the freedom to sit and relax.
It works with a radio frequency and unable to connect to WIFI.
It will be useful.
-
So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".
So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?
As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.
Recovery mode is described in this article as well. You may try to go into recovery mode more than once to succeed.
-
Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.
Yes, I'm doing exactly this with the same put in place.
If the problem persists the next relative to the following articles might help you.
-
Do not connect my iPhone and my iMac by continuity
Hello
My iPhone and my iMac connect properly through continuity, so I can't pick up on my iMac I do on my iPhone and vice versa. I can not make calls from my iMac via my iPhone.
I have an iMac, a MacBook Pro and an iPhone, and all of them are defined to connect, to make and receive calls and all the necessary parameters to ensure continuity, including the same Apple ID to all with the same accounts iCloud.
When I try to make a call directly from my iMac with my iPhone it says that the iPhone is not set to allow my iMac make calls. When I try to check my settings of the iPhone, the phone, my iMac does not appear as a device (my MacBook done) and I can't find a way to add in there. Although in my account/iCloud to Apple, there are all the details for my three devices.What can I do?
You don't mention the exact models of your Mac and iphone.
Maybe your iMac model is not fully supported for continuity?
Some of these features require fairly recent iphones and Mac. I can answer or make a call on my rMBP, but not on my iMac 2011.
-
5s iPhone cannot connect to wifi and not this update to the latest version of the software
MY iPhone will not connect to wifi and it's also not giv me updat options.
If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
-
My iphone is disabled. I can't connect to itunes and icloud without my password. It is not possible to do so while the phone is off. What should I do?
The steps here talk about everything that you can do other than take it to an Apple store with proof of purchase.
-
1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin
I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.
I guess you have not fed and attempted to restart.
In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?
Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.
-
My iPhone will not connect to iTunes and iPhoto
My iPhone 6 connect to iTunes and I have this music... I'm so sad now, please help!
If iTunes does not recognize your iPhone, iPad or iPod - Apple Support
-
My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?
Not knowing what the 'followed the steps posted' have been
The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.
The iOS device sees the network?
Error messages?
Other devices connect now?
The iOS device has connected before?
Try the following to rule out a software problem:
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
ten seconds, until the Apple logo appears.
-Power off, then back on your router
. - Reset network settings: settings > general > reset > reset network settings
- iOS: troubleshooting connections and Wi - Fi networks
If your iPhone, iPad or iPod touch connects to a Wi - Fi network
- iOS: recommended for WiFi routers and access points
-Restore from backup. See:
-Restore factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.
-
What does it mean when I connect to Facebook and a pop-up out saying ' [JavaScript Application] error: jQuery ("#fb_menu_account", document) .attr ("href") is not defined? I would like to know what I can do to solve this problem. The site will end up running slow. I tried to clear cookies and cache, but it does not work.
URL of affected sites
Fact is always happen in Mode without failure of Firefox. See questions to troubleshoot Firefox in Safe Mode.
If so, it is probably caused by an add-on. -
WiFi connected but browsers and mail stop working
Here's the situation:
iMac, 4 years, OS X 10.7.5
WiFi connected but, browsers and mail stop working sometimes recently.
Checked the wifi & browser settings.
Do not remember something like what happens when connected online cat5.
Curious to know what is happening.
Say local store card is perhaps go wrong.
The machine is only 8 ' of router.
Another pc on the network does not appear to be a problem.
Any help appreciated.
You can connect an Ethernet cable to see if it works on Ethernet when you encounter problems easily?
Try to use your own DNS server. Because if the DNS server that you use currently is not translate www.company.com name to IP address nn.nn.nn.nn, it will look like you do not have internet access.
System Preferences-> network-> advanced-> DNS-> [+]
208.67.222.222
208.67.220.220
Google DNS
8.8.8.8
8.8.4.4
You can remove them later if you want using the [---] button.
If this does not work, it could mean that your router is having problems. Most routers act as the local DNS server, make a cache and especially fair bet as a DNS server provided a front for the access provider. If the router begins to act, it can often be cleared by power cycling the router.
And once again, if you provide your own DNS server works, then it could be DNS servers of the ISP, but less likely that they would be getting a lot of complaints from their customers (assuming that customers thought it was DNS servers).
You know, there are 2 sides to any path of communications.
If it is technically possible for radio Wi - Fi of the iMac to fail, it's actually not very common.
-
When I connect the USB and LAN cable does not my trackpad
Hey guys how are you.
When I connect the USB and LAN cable does not my trackpad
How can I fix this error. Please teach me.
Which macbook model do you have?
a USB mouse still works?
your keyboard still works?
No matter which USB port you use?
No matter what USB device allows you to create this error?
-
How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.
Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.
Maybe you are looking for
-
Satellite T110-121 - slow wireless connectivity
Hi there, hope someone can help me. I just bought a Toshiba Satellite [T110-121 | http://uk.computers.toshiba-europe.com/innovation/product/Satellite-T110-121/1080681/toshibaShop/false/] laptop and it's absolutely great in every way, but it connects
-
How can I restore my computer to a factory State, it's a dell optiplex gx1
How can I restore my computer to a factory State, it's a dell optiplex gx1
-
HP ENVY Phoenix 810-230qe fails intermittently load Win 8.1 at startup
I've had my HP ENVY Phoenix 810-230qe with Windows Pro 8.1 for a little over a month now. I love the computer, but I had a problem. Sometimes at startup, the HP logo will appear on the screen of the monitor and that's where things stop. Windows 8.
-
Consumer Reports magazine said of the recall, by H - P free for chromebook 11. cord #MU15-N1052-A00S. MYINE IS FROM BESTBUY. Please SEND REOLACEMUNT to [personal information]. THANK YOU AND THANKS TO CR!
-
After the update of the victory 8 to 8.1 Win my solution center software HP not working anymore. After reinstalling all software of this tool, I get an error: "Error in file C:\Program Files (x 86) \hp\Digital Imaging\bin\hpqscloc\1033.xml analysis"