navigation menu difficult to obtain a binding configuration

Similar Questions

• How can I configure a secondary Navigation menu expandable linear stands for the specific Web site pages?

  I'm looking to set up a secondary Navigation menu that is customized to specific pages on my site. I tried to do this using the Widgets Library > Menus > Vertical, then dragged the vertical menu on the page. I know how to add sub-pages using the + box, but I want the subpage names at shOE upward in a specific way. The problem I have is, I want the secondary navigation menu to have a specific look, with "pages" of the menu running in the vertical menu format and subpages if poster in a schema extensible sub-navigation form (see image below), so that when I click on a homepage of the sub navig. menu, all the sub pages expand underwear, slightly indented (so that the hierarchy of the pages is obvious). Then, when I click on a different home page and its subpages below expand, I want the subpages of the homepage previously clicked on to disappear. I've seen websites set up in this way and I like the simplicity, the functionality and look of this type of secondary navigation, I don't know how to do. Does anyone know how this can be done? I am ready to go the "long way" If that's what it takes. Thank you.

  You can use the widget panel tabs to achieve this. (formatting to your look)

  Just add some text in each Panel and a link to the specific page.

  The only drawback is you wouldn't be able to link the main headings (Commercial... etc)

  

• How to restore the new tab button in the navigation menu when it is not available in the Customize?

  The new tab button disappeared from my navigation menu. None of the changes or upgrades have been made. While all subjects of support suggest going to customize the toolbar, the new tab button is gone either. There in the morning, disappeared in the evening without apparent reason. The + is at the end of the series of tabs, but not in the navigation toolbar and tab add + is NOT anywhere on a page it there is that a single label. I HIDE TAB BAR WITH ONE TAB 1.1 but have had for weeks, and the new tab button was always there. How to restore the button tab on the Navigation bar if it is not available in the choice to customize the toolbar?

  Don't you see the new tab button on the tab bar if you open the window customize?

  If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

  You can check the problems caused by a corrupt localstore.rdf file and try to delete this file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Spry navigation menu bar

  Hello

  I have a model downloaded from a Web site, that I am editing in dreamweaver. Because menus are already created, I tried to add a spry navigation menu to one of them. Now, I placed the cursor where I need the navigation menu, I chose, insert > spry > bar menus spry now I get a message "dreamweaver does not insert a menu bar in a list.please insert it somewhere else"

  I think that the problem lies in the menu bar that is already created? are there ways I can create the navigation bar on the same menu that is already created, because it is very convinient as it is already made.please help.

  Thank you

  Ayaz,

  I'd say you're better to remove the old menu and replace it entirely with the new Spry Menu :-)

  I think it would be too difficult to try to integrate the two - unless you are very familiar with CSS and Spry.

  --

  Nadia

  Adobe® Expert community: Dreamweaver

  http://Twitter.com/nadiap

  --------------------------------------------------

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  --------------------------------------------------

  Book: Ultimate CSS reference

  http://www.SitePoint.com/launch/005dfd4/3/133

• drop down navigation menu

  After the transition to version 4, the navigation menu dropdown menu, showing the most recently visited pages (near the navigation arrow buttons), disappeared. How can I get that back?

  Click and hold the unified back / next button, or right-click to get the rear / front in the history of this tab.

  Or install this extension to get the restored former "drop-marker" button.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/backforedrop/

• tinkered with toolbars, navigation, menu, buttons on the home page, page previous button-all gone. Whats left is just yahoo address pane, just gimme helps a bit to a 'download resinstall toolbar"will suffice. There is nothing to click, just a restoration-

  Went toolbar, navigation, menu, advance, home button, the button previous and all gone coz I was playing with the removal of the options of this and that... what remains is the Yahoo address pane and the button Zoom-close, nothing to click...

  Don't see the menu bar (file, publishing, display, history...) (Help)? Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.
  See the other bars under view > toolbars. Click on one of them will place a check mark (display) or remove the check mark (not shown).
  To display the status bar, display, and then click status bar to place a control mark (display) or remove the check mark (not shown).

  • If items are missing then see if you can find them in the view > toolbars > customize window.
  • If you see the item in the window customize then bring her back in the window, customize the Navigation toolbar.
  • If you do not see this item then click Restore default set in the view > toolbars > customize window

• Custom display PNG in the Navigation Menu

  Request Express 5.0.1.00.06

  Universal theme

  Left navigation menu.  Entry in the list.  Image/class.

  Used an impressive icon of police of an aircraft (f-plane), but needed a helicopter, so have an Image of custom Application (png image) loaded as a static application file.  Unfortunately, it does not display at runtime.  (There have also as .ico, .jpg, and .gif).

  Class/image: #APP_IMAGES #helo.png

  Is there a way to display a graph custom in the Menu of Navigation of APEX 5?

  Thank you.

  sheara wrote:

  He DID display a large enough image. could I miss a kind of CSS implementation in shape to make the image small enough to display and so maybe it is not displayed?

  No, what you're missing, it's that the APEX 5.0 navigation menu item universal theme has none supported directly including pictures of work/application space by specifying them in the Class/Image property list entry. The menu is not rendered using the markup generated by the list of navigation menu. Instead, it is used as the data model, from the widget menu real tree. The list of standard navigation menu template includes not one img element refers to the value of property for Class/Image as an image source. There is no need to change the list template to do this, or using another model as the tree view transform has not approved the img (or any other attribute custom) elements in the generated tree.

  Custom images can be included in the navigation menu entries using various other techniques (such as CSS background images): Apex 5 theme 42 Images of the file in the list of the Navigation menus

• Import list loses the record in the navigation menu

  Hello experts,

  I'm experimenting with more specific and APEX 5.0 component exports with export and import of lists.

  DEV, I have a list that is my navigation menu (user interface attributes > desktop > navigation menu > list of navigation menu).

  I add an entry to this list and make an export of this specific list pane only.

  In the TEST, I import this list into the same request with the same application ID and the ID workspace. The list of imports correctly and everything seems fine.

  Except that now my list is no longer my list of navigation menu. I need to change the attributes of user interface and reallocate this list as my navigation menu manually.

  Is this intentional behavior or my computer run into a problem here?

  For me, it's not intentional behaviour.

  I want to be able to update my list and there is record in the navigation menu without having to completely install my application.

  Any input/advice on that?

  Kind regards

  Bart

  Hi Bart,.

  This is a bug known, and followed with the bug # 22090477.

  Concerning

  Patrick

• Apex 5: Display of Navigation Menu only to certain pages

  Mine is 5 Apex (universal themes) and I use the list in the Navigation Menu, I have many pages on the same workspace, that I have used for several projects. What I want is to have several lists, each will include pages for a project so I'm having several lists that connects a different set of pages. How can I do?

  
  

  I know the list is shared components, does that mean that all lists belongs to all pages on the workspace and it will appear in all pages?

  I remember at the Apex 4 so we can associate tab Navigation with an individual page, we can control what page show and which not.

  Thank you

  Mike

  Thanks Swesley.

  I think that I figured it: Page Page Designer I need to "Level of UI substitute" set to Yes, and then select the list to another list name, I defined... That way I can group different pages in different list, which will show on these pages only.

  Thank you

  Mike

• How to get the number of entries in the navigation menu?

  

  How to get the number of entries in the navigation menu? Check the image. What it shows 8 number of customers and 10 products and 10 orders in the list. How to get it?

  --

  Thank you

  Hello

  Create items of the request saying, "CUSTOMERS", "PRODUCTS" and "ORDERS".

  Create the application process that defines these items when loading the page for example

  C1 in select count (*) NTC (of customer_table)

  loop

  : CUSTOMERS: = c1.cnt;

  end loop;

  C1 in select count (*) NTC (of products_table)

  loop

  PRODUCTS: = c1.cnt;

  end loop;

  C1 in select count (*) NTC (of orders_table)

  loop

  : ORDERS: = c1.cnt;

  end loop;

  Components shared Open-> Navigation bar and change:

  In the entry list Label-> customers & CLIENTS.]

• APEX 5.0 Navigation Menu Bug

  I started to dive head first into APEX 5.0 and the upgrade of existing applications that I have.

  I would like to start by saying thank you and congratulations to the APEX of the team for all of their hard work and dedication that went into version 5.0. You have all managed to take a tool I liked already use and do better and for that I tip my hat to everyone.

  The installation program

  As I was updating my old tabs to a shiny new Menu of Navigation, I came across an unexpected behavior that has taken the time to resolve, and I wanted to bring it and see if it is intended to treat in a future release.

  The problem

  During the conversion of the old lists to my main navigation list, I noticed that when I ran my application if I clicked to expand the section which the icons and functionality to expand/collapse the sections disappear. There is no way to get them to show again unless I clicked on another section. By clicking on the problem reproduced the same effect of endangered icons/feature section every time.

  The Cause

  After some trial and error, I discovered that the problem is caused when your text entry is too long. He effectively "pushes" icons in the navigation list and since they all line up well if we are eliminated, they all.

  The application of a Solution

  Even though I know it's a simple control condition for anyone who knows what is causing the problem, are there plans to fix it in a future release to be limiting the scope of input text or by having the text of the entry list auto-wrap when it becomes too long? I don't know that this is not a planned response to just have a longer name of the entry.

  Greetings Hamster wheel engineer,

  If by "menu navigation" you mean the "Tree Navigation Menu", then the bug you described with lengthy tags has been fixed in 5.0.1.

  If that's not your question, then you provide a screenshot of the problem who can I debug?

  Sincerely,

  Tim

• Navigation menu, counties of orders, customers (sample application)

  Hello! There are charges of customers, products and orders in the navigation menu in the sample database application. How can I do the same thing in my application?

  Thank you!

  User 2877049,

  Look on the list of the Application Menu in the sample Application, they use & A01. , &. A02 AND A03. in the list as follows.

  Create the APPLICATION POINT and create before Application calculation about the Application header as shown below

  

  using what they keep the account in the Menu list.

  Follow these steps, you can achieve the same effect in your application.

  Hope this helps,

  Go

• No Images in the upper Navigation Menu (APEX 5.0)

  Hello!

  I have defined images for each entry in the navigation menu. When I select the position of the menu (in Details of User Interface) to 'Coast', the images are rendered.

  But if the Position of the 'Top' is slected, there is no Images at level 1. At level 2, there is error Images.

  Is this a known issue?

  

  Best regards!
  Janek

  Hi Janek,

  Unfortunately this bug in the "Menu Navigation above" model and we're already tracking with bug #21202884.

  But there is an easy solution for it.

  1. Go to the components shared-> models and copy the above 'Menu of Navigation' template and name it "my Menu of Navigation above.
  2. Change the new 'My Top Navigation Menu'
  3. Go to the region 'Sublist Entry'
  4. In the attributes 'sublist model running, running with sublist, associated elements associated with elements of the sublist', replace the placeholder #IMAGE # #ICON_CSS_CLASSES #.
  5. Go to components-> shared-> Desktop User Interface attributes
  6. In the region "Navigation bar", set the attribute 'List model' to 'my Menu of Navigation above.

  Please note that the top-level menu bar entries will NOT show an icon. Only the menu entries will display the icon.

  Concerning

  Patrick

• Lists/Navigation Menu using universal theme APEX5

  I'm migrating my APEX to APEX5 application. I would like to use the new features of menu list/Navigation in the universal theme (so my menu items is displayed in the left navigation panel). I have a combination of static and dynamic options, and I don't know how to do this. My parent menu ('Reports' and 'Forms') options are static, but my choice of menu SUP for each will be the dynamic page navigation elements that will come from a SQL stmt. It would be a type of tree structure as below. Can you get it someone please let me know how to do this? Thank you!

  'Reports' (level 1 - static)

  "Report1" (level 2 option menu sub - dynamic)

  "I2" (level 2 option menu sub - dynamic)

  "Occurs3" (level 2 option menu sub - dynamic)

  .....

  'Forms' (level 1 - static)

  "Form1" (level 2 option menu sub - dynamic)

  'Form2' (level 2 option menu sub - dynamic)

  "Form3" (level 2 option menu sub - dynamic)

  
  

  bobmagan wrote:

  Thank you. My application was built on the sensitive to the APEX 4 theme. I wanted to use the new universal theme to take advantage of the update options. Previously, I had 2 parts of PL/SQL ('Forms' and 'Reports') who seized the dynamic pages of my custom table 'page' (see below). This would create a type menu tree they could click on launch my new pages for each. I hope to do the same sort of thing in the navigation/universal list menus.

  ----------------------------

  DECLARE

  Get_pages CURSOR IS

  Select page_alias, page_description

  page

  where page_type = 'REPORT '.

  and display_on_menu = 'Y '.

  order of page_order, page_description;

  BEGIN

  htp.tableOpen;

  Get_pages LOOP PAGE

  htp.tableRowOpen;

  HTP.p (')');

  If: APP_PAGE_ALIAS = page.page_alias then null;

  HTP.p ('': page.page_description: '');

  on the other

  HTP.p ('': page.page_description: '');

  end if;

  HTP.p (')');

  htp.tableRowClose;

  END LOOP;

  htp.tableClose;

  END;

  The application to the universal theme of the switch.

  Create a dynamic list query-based in the sense of:

  /* Static parent entries */
  select
      1                      lvl
    , 'Reports'              label
    , null                   target
    , null                   is_current_list_entry
    , 'fa-table'             image
    , null                   image_attribute
    , null                   image_alt_attribute
    , null                   attribute1
    , null                   attribute2
    , null                   attribute3
    , null                   attribute4
    , 'REPORTS'              attribute5
    , null                   attribute6
  from
      dual
  union all
  select
      1
    , 'Forms'
    , null
    , null
    , 'fa-edit'
    , null
    , null
    , null
    , null
    , null
    , null
    , 'FORMS'
    , null
  from
    dual
  union all
  /* Dynamic reports entries */
  select
      2
    , page_description
    , 'f?p=' || :app_alias || ':' || page_alias || ':' || :app_session || '::' || :debug
    , null
    , null
    , null
    , null
    , null
    , null
    , null
    , null
    , 'REPORTS'
    , page_order
  from
      page
  where
      page_type = 'REPORT'
  and display_on_menu = 'Y'
  union all
  /* Dynamic forms entries */
  select
      2
    , page_description
    , 'f?p=' || :app_alias || ':' || page_alias || ':' || :app_session || '::' || :debug
    , null
    , null
    , null
    , null
    , null
    , null
    , null
    , null
    , 'FORMS'
    , page_order
  from
      page
  where
      page_type = 'FORM'
  and display_on_menu = 'Y'
  order by
      12 desc /* attribute5 */
    , 1       /* level */
    , 13
    , 2
  

  Note that the attribute columns 1, 2 and 4 are taken into account by the model Menu lateral Navigation, then jump on them and use the attribute column 5 and for all required custom data in your query.

  Then go to the desktop user interface detail pageand set attributes for the Navigation Menu:

  List of the navigation menus:

  Position: Side

  Model from the list: Side Navigation menu

• Navigation menu

  I have tested a free trial version and have set up Master Pages, and have inserted a navigation menu.  I would like to know:

  • How can I separate the page names in the navigation menu to space out them individually in the space of a footer?
  • How can I increase the size of a navigation button as the Cup awarded the name of one of the page width.

  Thank you!

  If I understand correctly: the menu widget can be separated into its various components. You can, however, disable the background fill and adjust the spacing internally and externally in the Panel spacing using margin left and right options and parameters of the horizontal gutter for spacing between items.

  

  To sort by the name of the long page. Uncheck all Edit in the Menu options panel. Now you can target individual elements and adjust accordingly.

  

  I hope this helps.

  David

  Creative muse