Replace the printer cartridge information

Similar Questions

• Replace the print cartridge 8600

  I am trying to replace the black ink cartridge.  When I open the door on the front of the printer, nothing happens.  The printer cartridge door does not move and is inaccessible.  The printer seems to be on.  The green light is fading power on and off.

  Hello saratoga1,

  Thanks for the reply!

  I'm glad to hear that you solved the problem with a reset of the power (in the above troubleshooting guide Solution). Please select "Accept as Solution" 2 Message above for other members of the community can find our thread to see the appropriate link to solve this problem.

  Thank you!

• cannot replace the print cartridges CP1025nw

  I am trying to replace the print on my HP LaserJet CP1025nw cartridges.  I did several times.  But this time, I can not cartridges suitable for turning in place.  I press any button to specify which cartridge I want to replace, only yellow appears!  I tried switching the printer on and out on, and that did not help.  I really need to replace black, but cannot figure out how.  Any ideas?

  Hi @annie89 ,

  I see that you have problems with the carousel doesn't turn only not to be able to change the black toner. I would like to help you today.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You can manually move the carousel, by releasing the locking mechanism. Use something to push it.  Manually, back off the carousel, do not touch the toner however. I have also provided a picture where there are in fact two areas to leave, they are circled in red. The left side is easier to move.

  Cannot remove the ink cartridges.

  

  If the problem persists, I would like to do a hard reset.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  If you need help, let me know.

  Have a great day!
  Thank you.

• Officejet 4315 slow printing problems after replacing the print cartridge

  my printer was working fine until I replaced my print cartridges. I replaced the black with color with 22 and 21.

  my test page prints fine and sometimes my impression is very good. but often, my impression is extremely slow. can't understand why it is slow sometimes and other times it is nice. do not have this problem until I replaced my print cartridges.

  I found a post on slow printing and I tried the different steps. don't know what the issue is. Thank you

  Real new ink installed HP?

  You could remove the cartridges, reset the printer and turn on without the cartridges, and then reinstall the cartridges. Eliminate any power surge strips or extensions, plug the unit directly into a wall outlet.

  When you mention slow, how to slow down? How long to print from the computer exactly? How long for a print job initiated from the printer exactly?

• printer says to replace the ink cartridge, even though it is new

  Hello!

  Could really use some help with my printer. I recently bought new ink cartridges and I replaced the "old", but then my printer started to show on the compensation carriage jam error messages, even though it was clear and since then, he has constantly shown this error message on ink. He wants me to replace an empty ink cartridge to continue printing, it won't work otherwise.

  Ink, that I placed in the printer is totally new and authentic, but there is no answer, he displays the same message to two ink cartridges, which makes me realize that it of not really discern who is new or empty.

  If I remove them both, it tells me that there is an empty ink or damaged.

  I tried the reset of the printer, stop it down and turn, but the same message is displayed immediately. The light next to the screen flashes all the time.

  When I replaced the old cartridges I did not process the printer, I replaced them all first and then let him treat. Maybe it was wrong to do so?

  Any help is appreciated!

  It seems to be a problem with either the hardware of the printer or the replacement cartridge. If it is the cartridge, it should be covered by warranty (if it's authentic HP) given that you bought at just. Now, I think that your best shot would be to contact HP Technical Support to see all the other possibilities for you.

  The only other option would be to try an another new cartridge replacement for rule in or out the cartridge at fault.

  If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

• "I have a hp officejet 6500 e709 - black ink does not print." I have replaced the ink cartridge...

  "I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.

  Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  Try this first and post back to tell how you got.

• HP Envy 5530: HP Envy 5530 told to replace the color cartridge, even after replacing with a new one.

  HP Envy 5530 said to replace the color cartridge, even after replacing with a new one.  Printer is 1 year old and I replaced the cartridges several times over the past year.  I am enrolled in the program of HP ink.  I can run the printer mode single cartridge using a black ink only and it works with my pc XP, Ipad, Chrome pc and mobile phone.  My pc win 8.1 will not print anything other than a test page.  Printer on the pc file lists always attention required when you try to print from the pc win 8.1.  I believe that the problem may be related to surface of cartridge for printing inside the HP envy heads 5530.  This part is available for purchase, and if so, where?

  I found a work around.  On the pc win 8.1, it seems that the print request must see a reset of the HP envy 5530 to print mode single cartridge.  I just start the pc and then reset the printer by lifting the hatch for the print heads.  That's all.  Once this is done, the 'attention required' message goes to the loan and it is able to print.  It will open a window, which suggests you add the color cartridge, but it will disappear when printing.  Simply open the door once and you can print until you turn off the pc.

• My Epson Stylus 610 says to replace the ink cartridges, but I just put in new cartridges Epson

  My Epson Stylus 610 said to replace the ink cartridges, but I had just put in the new Epson cartridges.

  I have it reset, and I tried to clean up the area, but still the same message and cannot work around.

  My drivers are supposed to be updated.

  I can't print anything.

  [Moved from the community centre of Participation]

  Hello

  Welcome to the Microsoft community.

  What operating system is installed on the computer?

  You may need to check if you have followed the actual procedure to change the ink cartridges.

  Please see the following article:

  https://files.support.Epson.com/htmldocs/sc60__/sc60__rf/ink_1.htm

  https://files.support.Epson.com/htmldocs/pho22_/pho22_rf/ink_1.htm

  Kind regards

• Aligning the print cartridge HP PSC 1500 series printer

  I just installed a new ink cartridge and try to align. When I open the HP PSC 1500 Setup page, it gives me the option "align cartridge". When I click on it it opens a dialog box titled 'printer properties '. There is no information on how to align the cartridge.

  Thanks for your reply. It didn't really solve my problem. As I've mentioned before, I tried to get the 'how' info from the HP PSC 1500 series control page that displays a link to "aligning the print cartridge. By clicking on this link opens a dialog box that has nothing to do with the alignment of the cartridges. It was not very useful, but eventually, I remembered what I had to do was insert the alignment sheet and press "scan."

• I need instructions for replacing the ink cartridge on my color laserjet pro 100 mfp175nw.

  Can you please send me instructions to replace the ink cartridge on my color laserjet pro 100 mfp175nw.  I have a 126 a cartridge.  Also, where can I get a full manual for my printer?

  Hello revammann

  You can find instructions for the replacement of the cartridge to print here and you can find the user manuals here.

• all the pages of bad qualities with the toner after replacing the toner cartridge

  I just replaced the old cartridge with a new one, but now the pages come out covered in black toner to make the text unreadable. I tried to turn the drum several times following the directions to distribute the toner evenly, but the problem remains. Please advise?

  Hi, Happytohelp01.

  Thanks for your kind response,

  I use a black and white HP Laserjet 1010.

  I am trying to print a text, the printer does not have a digitization Center.

  Yes, this is the first time that I had no problem with this printer.

  The toner is melted and begins to run out, so I replaced it with a new replacement cartridge I bought the printer about three years ago. Later, I shook and reinstalled the old cartridge, which seems to work very well with no black spots. The new toner would be obsolete?

• Replace the magenta cartridge on the HP Officejet says 6600 still needs to be replaced

  Impoverished cartridges must be replaced before printing. Because, for the first time and still have the same error. I already have market power. What's next? I use HP ink cartridges

  I spent a frustrating hour and a half with a similar problem.

  Install cartridges were exhausted, so I bought new ones. The replacement, he kept complaining the magenta one not recognized or is damaged. I am worried because my new cartridges were not original HP.

  Sometimes, he tells you to power off the printer, and at other times, he said you turn off may damage.

  I put my old HP original magenta cartridge in and it came with the same message. I was afraid that the device had been fried. In desparation, I thought that maybe it's all just bad contacts.

  I did a small wedge of paper folded twice and laid it gently between the new ink cartridge and the small black plastic on the top right tab that serves as a guide when you replace the ink cartridge in the slot. This gives a bit of pressure to push the chip at the top left of the ink cartridge to make contact with the indication on the printer itself. Now he reads both cartridges without problem, and it prints like new.

  Without paper, I could manually gently press the cartridge to the left and it would only print a page before she herself back in place in a position where it cannot be detected anymore.

• Dysfunction of the print cartridge

  Screens of C3180 HP all-in-one 'check color print cartridge' and will not be printed.  Have replaced the HP93 cartridge, but

  problem persists.  Operating system is Mac OS 10.5.8

  Solved by removing the cartridges and resettlement.

• aligning the print cartridge has failed!

  I have a HP Officejet J5780 all-in-one printer.  It was working fine until I ordered new cartridges on the HP store online alternatives.  When it came to replace them and use them, I started to struggle to align the cartridges.

  The error message I get little matter I try is the following:

  ERROR: Align Page not detected!

  I have repeatedly tried over and over again... now I can't print anything.  Only, I had this printer a year and rarely use it!

  Thanks, I've been subject to shoot than the little hair that I had remaining. The screen told me to replace the color cartridge, so I did and then it would not recognize the paper from swipe. I replaced the black cartridge and then no problems.

  Thank you thank you thank you

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear