Command sets does not not on ACS 5.1

Similar Questions

• Windows 7 Defrag from command line does not work

  We are running Windows 7 in a virtualized environment. When you run windows defrag hourly use of the command line, it does not work. The order that I will execute as administrator is

  C:\Windows\System32>defrag/c

  Microsoft Disk Defragmenter
  Copyright (c) 2007 Microsoft Corp.

  It displays the above message and leaves back to the command prompt. However if I run the defrag C: command it does not. Defragmentation from the GUI works so as long as both drives (C: and system reserved) are selected and when I click on defragment drives, works very well.

  I am concerned about defrag from the Task Scheduler with the command ' defrag/c' (self programmed to help set up the calendar... from Disk Defragmenter) does not work and the system never gets defragmented automatically.

  This only happens with some of the windows virtual machine 7 we have.

  There are no entries in the event log that point to defragmentation (using the Task Scheduler). Anything can happen on the ideas?

  Hello Sebastian,.

  Thanks for posting your question on the Forum of the Microsoft community.

  The question will be better suited to the audience of it professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• spam - the spam setting does not eliminate these

  I constantly get emails from viagra to * address email is removed from the privacy *. The junk e-mail setting does not eliminate them. What should I do?

  Hi comaloujoe,

  1. did you of recent changes on the computer?

  2. what email program are you using? What is Webmail?

  You will need to contact support e-mail program for assistance.

• Cannot play bigfish games - your video card setting does not match the minimum system requirements: at least 2048 x 2048 DXT1 & dxt Texture size

  Original title: I have a computer toshiba M30 laptop and I'm on windows7. problem is that I can't play at bigfish games?

  HI the error I get is: your video card setting does not match the system minimum requirements:

  The size of the texture at least 2048 x 2048 DXT1 & dxt5 Texture formats support of the target.

  Thank you Joe

  Hey Joe,

  Thanks for the post.

  We need a few more details to help games play question, please answer the following questions.

  1. is this problem limited to Bigfish?

  2 do you have any problem with other games?

  You will need to install a graphics controller (video card) which can meet these minimum requirements.

  You can go through the following link; who helps update the graphics card, this could solve the problem.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also download and install the latest display driver by downloading from the website of the manufacturer of the computer.

  http://support.Toshiba.com/drivers

  I hope this helps.

• After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. How to fix?

  After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. It works well to return to the grid when in the develop module. The problem was not resolved with LR 6.2.1.

  PS: Being a urser LR since 2008 I hate the new import dialog so I have stopped using the program and will do so until the classic dialogue is back. Or it won't and I should start looking for alternatives?

  Rune

  One number of others have experienced this problem - please add your vote and details of this bug report in the Adobe official feedback forum: Lightroom: keyboard shortcut 'G' does not not in the library module.

  A few others have reported that restart the computer immediately after resetting preferences seems to fix the problem.  Also note that you can use the ESC key to exit the view library Loupe return to the display of the grid.

• HP x20LED monitor is blurry. Auto configuration flashes to adjust, but setting does not

  Hello

  I am running Windows 7 Home Premium on my Toshiba Satellite L665D.   HP x20LED second monitor is connected to the laptop.  It's blurred.  In the past, I was able to set the monitor, but it seems every time that I disconnect it and connect the monitor to another device, when I get back to connect to the Toshiba, the screen is a little blurry.

  I decided it's not the monitor, but I could be wrong.  I have a Thinkpad T530 Lenova that I use for work and the monitor is clear when I connect it to this laptop.  However, when I connect the monitor to my Toshiba and I press the Auto button on the monitor, it flashes to make adjustment and it looks good for about 2 seconds, then when the flash setting is completed, the display returns to the screen blurred.  you s not terribly blurred, but after seeing how the AutoFix appears, I don't know why this setting won't stay adjusted better on-screen.

  How can I get fit to stay?  I've updated the driver on Toshiba (Control Panel-> Device Manager-> maps-> ATI Mobility Radeon HD 4200 Series-> Driver-> Driver Update), but it does not solve the issue.  I don't know if it is the video card that I don't know where to find that on this laptop.

  Thank you!

  I thought about it.

  In the customization --> wallpaper --> the position of the image --> 'Center'. I clicked on the 'Auto' button on the monitor and the blur has been repaired. Background theme images are now fill the entire screen instead of not completely fill.

  Maybe it's a bug. I usually select "Fill" for the position of the image, but the sets were not filling the entire screen. It can depend on the theme of background selected - even if it's a pack of Microsoft. I don't know, but this fix worked in my case and maybe it will work for anyone with this problem.

• Brightness (key or setting) setting does not work on HP Envy17 2290nr after the loading of Windows 8?

  After the upgrade to windows 8, why the brightness adjustment is no longer works on HP Envy17 2290nr?  Went to set the charms and brightness controls do not work here either.

  Hello DJSZCZEP.  I understand you are having some problems with control of the brightness of your laptop in Windows 8.

  HP is still drivers for the update for Windows 8.   Most laptops that have been purchased after October 1, 2011 must be supported at the time.  Here a link to more information on the upgrade to Windows 8 and HP.

  The support page for your laptop does not currently listed drivers for Windows 8.  This does not mean that Windows 8 does not work on your laptop.  This simply means that some features and functions may not be available. Advanced features like the brightness control can be handled by the driver itself and require a complete driver for features.  Your the tender specifications lists the video card like the ATI Radeon 6850 M.  Here are the drivers for the 64-bit version of Windows 8.  Try using these drivers and tell me if this solves the problem.

  Keep an eye on the support page of your product for updates, including drivers for Windows 8.  I hope it's useful.

• system files and command prompt does not work

  For the last two weeks, I'm having a nightmare. I disabled system restore and when I turned it on again every thing had stoped working (microsoft word and works procedssor), the user account micxrosoft help and support).

  I tried using command prompt, but it does not work properly. When I typed in the shadow of the list he has the right to copy, my name and disturbing without clichés present in this system.  When I go to system restore I just get ablank screen white. If I go into system the control panel says that my C drive is followed.

  I don't know what else to do Windows XP came with the perchase of my little computer. I only am not computer savvy very please check all instructions fool proof. Please HELP, as all I want for Christmas is saystem restoration. Thank you very much

  Please provide additional information on your system:
  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
  It seems that your system has or has had a malware infection.

  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine...

  You should be able to get your system restore calendar works again quite easily, but who will not only relieve your system of malware.

  Don't forget to fix the problem and the difficulty not only the symptom of the problem.

  If you disabled the system restore and he turned his back, which removes all points existing restoration (this is how it is supposed to work).

  I run a few scans of such malicious software indicated below, then work on all the remaining issues.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.  System Restore is sometimes so afflicted, you need to reinstall the system restore (you don't have to reinstall XP - just reinstall the system restore).
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  Restart your system and resolve outstanding issues.
  If your system restore calendar is always to show just a blank white screen, do the following:
  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Re-record the dll is correct, even if they do not need re-registration.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time:

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Check your system restore calendar now.

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• The screen brightness setting does not appear in the mobility Center

  original title: how is the screen brightness control does not appear in the center of mobility?

  In the past the mobility of my laptop Vistas Center contained a slider to set the brightness of the screen.  My computer screen is dark and I want to adapt it to a brighter screen.  How can I get my rear screen brightness adjustment?

  Hi bigwaterboy,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest updating the graphics card driver on the computer and check if it helps:

  Updated a hardware driver that is not working properly

  Reference link:

  Using Windows Mobility Center

  I hope this helps.

• Quick setting does not work for the update of the BIOS.

  I have dell Inspiron 5559, I updated my bios to the current version, but apparently my quick adjustment does not work. I tried to uninstall, but it says "the Bios in your computer is obsolete. Update your bios firmware to the current version. "I can't update the quickset too! What should I do?

  Thanks to avd. ...

  But the thing is, after using it for a few days, pls, make sure the bios or driver quickset issues are resolved on the next update, on their compatibility. Quick setting works fine now, but the bios updated makes driver it is unnecessary because DellPowerManagement does not work amd icons quick adjustment of the numeric keypad and fn key doesn't happen. Aparently, the powermanagememt can be woroed in the menu of the bios and quickset icon doesn't show, but guess on the behavior, you can see if the keypad lock and fnlock is enabled or disabled. So I would say users do not use bios 1.2.4 update, better, use 1.2.3 that works smoothly and with all the features.

• Policy setting does not work: 'turn off the upgrade to the latest version of Windows through Windows Update.

  Why this parameter has been added to Windows 7 Pro policy if it does not work?

  Computer--> administrative templates policy-> Windows-> Windows Update components

  I can't upgrade yet.  I'd like to, but I can't.  I lost a whole weekend, taking advantage of the new version of the screen of BSOD in Win10 until I dropped.  I need to backup my files, applications, and configuration information and do a clean install of Win7.  I'll do it when I have time, right now I have not, I work 40 hours a week and I go to school at night.  But if my computer is overheating because it begins to turn during the day I have to send M$ by Bill...

  Hi William,.

  Thanks for posting your query in Microsoft Community.

  • Your computer is connected to the domain?

  I understand that the policy settings do not work and we will be happy to help you resolve the problem. From now on, I recommend running System File Checker tool and check.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Press the Windows key + X , and then click prompt (Admin)

  Type the following command and press enter

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• The use of password for show/hide forms - anyway to keep the setting "does not print?

  I have a George_Johnson script that allows me to enter a password to show/hide the fields selected (keys actually).  It works perfectly, but when I enter the password and buttons appear again, setting general/Common Properties amounts to 'visible' instead of ' visible but does not print ', and the buttons appear when I print the document.  I thought I could change these lines and print buttons...

  case 'password': / / your password goes here

  getField("x").readonly = readonly;

  getField("x").display = readonly? Display.Hidden: display.visible

  App.Alert ("level 1 support is now" + readonly_desc + "d", 3);

  break;

  .. .to change the 3rd line to read as follows: getField("x").display = readonly? display.hidden: display.visible but does not print  (or _but_doesn't_print;)

  but then I started to make syntax errors in the 4th line.  I don't know about Java, but I thought I might get lucky.  I get hot?  What is the "3" that needs to change?  Or is that I started quite wrong?

  Thanks for reading,

  Zac

  You can't guess correctly that the value can be and expect it to work... You should consult the documentation.

  In this case, what you're looking for is "display.noPrint".

• apply the filter command button does not

  Hello experts, I have the code to apply the filter of order button below, but when I click on the command button, it runs under code but works.   Array is not be filtered:

  {} public void applyTableFilters (ActionEvent actionEvent)

  FilterableQueryDescriptor qd = (FilterableQueryDescriptor) myTable.getFilterModel ();

  QueryEvent queryEvent = new QueryEvent (searchResultTable, qd);

  myTable.queueEvent (queryEvent);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (myTable);

  }

  < af:commandButton text = "ApplyFilter".

  ID = "applyFiltersCB" styleClass = 'blue '.

  actionListener = "#{viewScope.myBean.applyTableFilters} '"

  Binding = "#{viewScope.myBean.applyFilterCB} '"

  immediate = "true" >

  < / af:commandButton >

  < af:table value = "#{bindings.myList.collectionModel}" var = 'row' "

  Rows = "#{Bindings.myList.rangeSize} '"

  emptyText = "#{bindings.myList.viewable?" "{'No RECS found': 'Access Denied.'}".

  fetchSize = "#{bindings.myList.rangeSize} '"

  disableColumnReordering = "true" rowBandingInterval = "1".

  inlineStyle = ' height: 400px; "

  filterModel = "#{bindings.myListQuery.queryDescriptor} '"

  queryListener = "#{bindings.myListQuery.processQuery} '"

  filterVisible = "true" varStatus = "vs."

  selectionListener = "#{viewScope.myBean.currentSelectionListener} '"

  rowSelection = "#{viewScope.myBean.rowSelectionMode} '"

  ID = "t1".

  Binding = "#{viewScope.myBean.MyTable}" >

  < af:column sortProperty = 'year' filterable = "true" sortable = "true".

  shortDesc = 'AnnΘe Prg'

  headerText = "Year" Prg"id = 'c4' >

  < af:outputText value = "#{row.yearCode}" id = "ot6" / > "

  < f: facet = name 'filter' >

  < af:inputText label = "" id = "it1" shortDesc = "Prg Yr Filter" "

  value = "#{vs.filterCriteria.yearCode} '"

  maximumLength = "5" >

  < / af:inputText >

  < / f: facet >

  < / af:column >

  ......................................

  < / af:table >

  Appreciate any help.

  Finally it worked.    The question is the table PPR using backing bean does not display the filtered data rather than it shows full data.  If I use UI PPR, then apply filter method works very well.

• Beginner question: 'active' setting does not

  Sorry for the very noob question but I am just learning AE scripting. I try to use a script command to disable the eyeball on a layer. As I understand it, the syntax for the parameter is:

  App.Project.Item (index) .layer (index) true

  For the test, I created a unique model, and in this model, I have a solid single. I created an expression with the line

  App.Project.Item (1) .layer (1) true = 'False ';

  But when I run it nothing happens. It returns an error but the layer remains enabled. Please can someone explain why it does not work?

  Try this way:

  App.Project.Item (1) .layer (1) true = false;

  Dan

• command z does not not mac 10.10.5 PSC 6

  Brush strokes are delayed in the history. Sometimes the brushes and the freezing of the entire application. Clicking on another application or desktop will unlock. Command z key combination has no effect after a period of work. Cancel jobs in the History palette. The gel brush back Mavericks but key sequence number started with Yosemite. Thank you.

  I recently reinstalled PS for another question. This is the same before and after.

  Hi Tom,

  Please follow the link reported for the same question below.

  Photoshop: CS6 / keyboard shortcuts CC does not not Mavericks/Yosemite MacOS 10.9; 10.10

  ~ UL