Navision 4.0 can be made to work under Windows 7 Pro?

Similar Questions

• I have a piece of hardware that has only drivers for XP. Is it possible that I can get it to work under Windows 7 (64 bit)

  It is a Dazzle 80 to convert analog video to digital.

  You can use the XP mode if you have the professional or Enterprise version of Windows 7 Ultimate.  If you do not have one of these versions, you can use the Anytime Upgrade, and then XP Mode is free.  It works as a task under Windows 7, starts in 15 to 30 seconds, does not require a reboot and works very well.  The graphics are a little limited, but if you enlarge the window XP Mode, you can get a color to 16 bit 1360 x 760 which is not bad for something other than fast action games.

  Good luck.

• Brother Control Center 3 has stopped working under Windows 7 Pro

  Recently trying to use my Brother Control Center 3, I get only a white white mask on the screen which used to hold the scanner controls. My computer is running Windows 7 Pro, Service Pack 1 with all current updates. I get to use my printer MFC - 240 c with no problems and the Suite Pro that came with is is v - 1.0.3.0. My Control Center version is 3.10.0.0. I tried to reinstall the Suite Pro by uninstalling the first there. When you try to run the CD, I got a message that the drivers have been updated, and I had to go to the website of Brother to perform the installation. After finishing, I always have the same white screen when you try to start the CC3. I checked all the settings several times and still can't understand why it has stopped working; any ideas? I planned to take the 10 free Windows upgrade, but now I do not know if this will solve this problem or cause more problems.

  Thank you for pointing me in the right direction. I started a Chat Session with the support of brother and they gave me the following patch that worked very well. Good day.

  [Jonathan] Here you are:

  http://support.brother.com/g/b/faqend.aspx?c=CA&lang=en&prod=mfc9840cdw_all&faqid=faq00100228_000

• Where can I download the compatible driver Intel(r) 537EP V9x DF PCI Modem work under Windows 7?

  I just upgraded my Dell Dimension 5100 to Windows 7 from XP. I can't get any internet connection with cable or wireless. I think the problem is the PCI modem. Where can I download the compatible driver Intel(r) 537EP V9x DF PCI Modem work under Windows 7?

  Original title: MODEM PCI FOR WINDOWS 7 DRIVER

  Thank you for your comments. I use the dial upward. However, my PC does not connect to broadband, even with direct Ethernet cable connection or adapter wireless Netgear WPN111, I used happily with XP on the same computer. Device Manager displays the PCI as incompatible. FYI, I downloaded and installed the latest drivers for the wireless card.

  Install the following:

  • Dell system software
  • Intel Chipset Device Software

  Dell systems must run more stably once they installed. I would remove the modem PCI card.

  Intel Pro/100 VE Ethernet should work natively with Windows 7 as Windows 7 has built-in driver:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18268&lang=eng

  Then the Netgear Wireless Adapter for Windows 7 driver from here:

  http://support.NETGEAR.com/product/wpn111

• Reference software does not work under Windows 7

  Reference 9, a bibliographic database program, does not work under Windows 7.  It worked fine under XP.  Support of reference people were a great help and I'm stuck with the program so far.  The program opens and can be saved, but when you do a search, the first research work, but a second search will generate a message 'quote has stopped working.  A problem caused the program to sop work correctly.  Windows will close the program and notify you if a solution is available. "Then you must click on the" close program"button to close the program and then re - start.

  Are you sure that all the prerequisites for the program have been installed (like the .net Framework or VC ++ runtime libraries)?

  In addition, is the version of the reference program tested by the people of tech reference that same as you use?

  Please make sure the version of the program made for Windows 7 is available, and if yes, you can use this version of Windows 7.

  A work around:

  If the program fails to work, even if all prerequisites have been installed, you can try to install the software in Windows XP Mode (not recommended, but we can not miss this in the case of legacy programs). You can take a look at the following links:

  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=8002

• Can I get a download for Windows XP Pro sp1

  Can I get a download for windows xp pro sp1. I have no internet on the other pc that im going to but sp1 on it, but sp2 does not work because I get a blue screen and sp3 does not cause I get a blue screen. The computer is a Hp d530 sff. I want to just reinstall the entire system please help me

  HP - the restoration of the order of the discs for Windows 7, Vista or XP
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00810334
  For computers manufactured and sold in 2006 or later, based on the Microsoft license agreement, you can create a personal recovery disk to restore your computer to its original operating system.

  HP support: Phone numbers: http://www8.hp.com/us/en/contact-hp/phone-assist.html

  View together to recover the operating system or the operating system reinstallation
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00006110&LC=en&DLC=en&cc=us

  Performing a recovery of the system to return the computer to its original state
  may require that if the operating system is corrupted, the hard disk is damaged.
  or the computer is infected with a virus.

  Performing a system recovery deletes all software and files saved on the hard drive.
  Reinstall the original operating system, and then configures the settings for default programs.

  Since the merger of Compaq and HP, several recovery methods and different tools
  The names for these tools include: Solution of recovery, Recovery Manager, F11 restore disc.
  Driver and Application Recovery Disc, Roxio BackOntrack, Microsoft Backup & Restore.
  provided for the recovery of laptop computers to their original state.

  To help you select the correct recovery process, the table contained in this web site base article
  identifies the different models, the time when they were produced and sold,
  In addition, operating systems initially configured.
  Click on the document name in the column on the right for detailed information.

  J W Stuart: http://www.pagestart.com

• Database pogram worked under Windows XP but does not work under Vista

  I have a piece of third party software that I bought in 2002 is based on MS Access. It is a program of inventory control with a number of predefined data entry forms and reports. Initially, he worked under Windows 2000 and continued running when I upgraded to Windows XP. However, after the upgrade to Vista, I get the error message "the Microsoft Data Access components are not found on your system. These must be installed to the program works correctly. "I've updated to Office 2002 to Office 2007 to try to solve the problem, but without success.

  Are there other components of access or other software that I can download to keep this work programme (the original third-party supplier is no longer in business).

  Furthermore if this third party access program is a "module compiled access", and then upgrade to Access 2007 will not help. You may be able to connect to the old Access db to Access 2007, but then you have to write all the modules to allow the use of the program.

  If the program is not a compiled module in Access 2007, you must change the vba modules to be complient with your installed version of access

• Explorer stopped working under Windows 7 64-bit

  SOS

  Explorer has stopped working (Windows 7 64 bit TouchSmart 520), it crashes from time to time and the rail of the screen and I can not do or move with the mouse until ' in that it restarts Explorer nothing. And PC and a slow opening nearly two minutes to get a home, then 50 seconds pour office to the Windows Get. Thanks reloaded

  sincerely

  ***************************************************************************************************************************************

  Hello

  Explorer of the Nations United continues to work (under Windows 7 64-bit TouchSmart 520) it blocks from time to time and tout the screen and block I can so do or move with the laetitia until it restarts Explorer.

  And the pc and lent a L'Ouverture almost two minutes pour get one THEN welcome 50 second pay the arriving to the Windows desktop.

  Thanks for help not CDL

  Double post / Double post

• Microsoft Edge work under Windows 7?

  * Original title: Brouser

  Microsoft Edge work under Windows 7?

  I have problems with IE11 and Windows 7, I think mircrosoft is trying to force the use of Windows 10 until he's ready. I have too many apps that do not work with windows 10 so not ready yet.

  Microsoft Edge work under Windows 7?

  Microsoft Edge is available in Windows 10.

  I have problems with IE11 and Windows 7, I think mircrosoft is trying to force the use of Windows 10 until he's ready. I have too many apps that do not work with windows 10 so not ready yet.

  You can try the following:

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  See if Internet Explorer starts working again.

  Another option;

  Click Start, type: enable or disable windows features

  Press enter

  Uncheck Internet Explorer

  Click OK

  Restart when prompted

  Click Start, type: enable or disable windows features

  Press enter

  Check Internet Explorer

  Click OK

  Restart when prompted

• application of foxpro for Dos does not work under Windows 7 Home Premium 64-bit

  Dear Expert help me!

  My foxpro for Dos application does not work under Windows 7 Home Premium 64-bit. Please advice me! How can I do for running under Windows 7 64-bit

  waiting for early response
  Thank you and regards

  SAIF Ali Sabri
  Faisalabad, Pakistan
  E-mail address is removed from the privacy *.
  + 923007960782

  16-bit applications are not taken charge/does not not on 64-bit Windows

• Driver for my HP DeskJet 1280 work with windows 8 pro 64-bit

  I need an updated driver for my HP DeskJet 1280 work with windows 8 pro 64-bit, has issued summer yet?

  No, and it will not be because the 1280 is an abandoned product.

  What you have to do is to go to control panel > devices and printers > add a printer.

  When in the process, you can use Windows Update to search for a driver, take it. The list of compatible printers is growing exponential, and your should now be in the list of printers HP or Hewlett Packard... This may take a few minutes to grow...

• Battle of Britain 2 will not work under windows 8

  Post this question once again, to the flag that he is still not resolved despite the assistance offered in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/battle-of-Britain-2-wings-of-victory-will-only-run/e15b98f0-ee3b-4807-bb06-a9b8d11b70e8?rtAction=1375635431038
  Although the game is listed by the developers as compatible with Win XP, it works absolutely fine in Windows 7 but does not work under Windows 8, or in compatibility modes either. Have you tried all the corrections proposed in the thread above credits, and no help.
  Some tips that I can spend on the game developers on how to try to make compatible Win8 game, can be useful, as I have their contact information.
  Thank you
  Fred

  Hello

  Microsoft maintains a full division (MSDN) whose only goal is to help developers creating Windows compatible software. The developers of this game would need to use an SDK (Software Development Kit) or one of the other products developer to build the game.

  You can ask this question on the MSDN forums.

  MSDN forums:

  http://social.msdn.Microsoft.com/forums/en-us/home#category=usingforums&filter=AllTypes&sort=lastpostdesc&content=content

  Did you ask the developers if they plan on an update of Windows 8 support?

  Concerning

• The ADF Mobile preview pane does not work under Windows 8.

  The ADF Mobile preview pane does not work under Windows 8 64-bit even I use Jdeveloper 11.1.2.4.0 version, but I use windows 7 64-bit or windows xp works fine.

  How to solve this problem, please.

  Thank you!
  

  Hello

  I installed JDeveloper 11.1.2.4 on my machine Windows 8 and the extension of the ADF Mobile. I can open the ADF Mobile Viewer. There is therefore no problem with this on Windows 8. I used the generic facility, which is that I have installed the JDK and then run the command for installing JDeveloper Java-jar.

  Frank

• Scanner Compatability__I'm trying to get my scanner Visioneer 9320 to work under Windows Vista without result. Help please.

  I'm trying to get my scanner Visioneer 9320 to work under Windows Vista without result.  Help please.

  Hi Viver,

  While I have been researching the issue, I met that the scanner model is not compatible with Windows vista and also similar told by the visioneer in the link to their website below.

  http://support.Visioneer.com/products/9320/downloads.asp

  You will need to contact the visioneer to see if they have no update or the hotfix released for Windows vista.

  http://www.Visioneer.com/company/contact/

  http://www.Visioneer.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Acer Scanprisa 640U: how to work under Windows 7 64-bit

  I have an Acer Scanprisa 640U scanner that works under Windows xp using Mirascan 4.03. I now want to use the scanner under Windows 7, 64-bit, but that the program is installed it gives me every time "Scanner is not found."

  You need the specific manufacturer win7 drivers scanner, if they produce such for Win7 or Vista 64-bit