NB100 - How can I recovery it?

Similar Questions

• NB100 - How can I create a recovery on a USB CD?

  Hi friends,

  I recently got a NB100 with XP home. The operating system has been reinstalled and did not have any CD of the operating system.

  Given that I have not an external CD drive how can I create a recovery on a USB CD. I would like to see the function of USB USB just like the CD in case something really goes wrong.

  Can some help me to find a tutorial to do this?

  Thanks for your help.

  SAJ.

  Great! Thanks for sharing this with us!

• NB100 - How can I use a USB drive to NTFS?

  How can I make the ubuntu remix in my NB100 accept my USB what file system is NTFS?

  Happy if someone can help.

  Hello

  On Linux systems, you are able to read the NTFS file, it should work without problem.

  If you want to write data to an NTFS drive, you need a driver.
  Search this Web site. This could be useful for you:
  http://www.NTFS-3G.org/

  Welcome them

• Satellite L10-120 - how can I recovery it?

  I am in need to recover the software preinstalled on my laptop and in the manual it is said that I put in the DVD and then press C and start the computer, but nothing is happen.

  How can I recover my hard drive with the software pre installed on another way?

  grateful for some help.

  Patrik

  Hello!

  To the recovery of your laptop, you need the recovery disc that you have and the you must boot from the CD/DVD drive that s all!

  So go to the menu of boot if you press F12 immediately if you have turned on the laptop and select your hard disk.
  The laptop is trying to boot from the CD/DVD drive and now follow the instructions on the screen.

  Good bye

• NB100 - How can I reinstall OS from USB flash drive

  My laptop TOSHIBA NB 100 has no CD-DVD player.
  Operating system is Windows XP Home SP2.

  Operating system won't start.

  Laptop start not at all so I can't run any kind of test when I turn it on.

  The thank you screen come on it says launch safe mode, the networking of safe mode, safe mode comand prompt or start windows normally. But no matter who I chose, that it does not start it only goes to Windows and looks like its starts but then shows the blue Windows screen & stays there.

  So I want to reload Windows from my USB flash drive.
  The BIOS boot sequence is the USB HDD - FDD - FD - CD memory.

  What are the steps for loading Windows USB flash drive?

  If that does not work then I want to connect another laptop with Windows CD in the CD - DVD drive laptop.
  Will this work? The laptop will use the Windows CD in the drive of the laptop to load the operating system?
  How to make this connection?

  Hello

  You usually have an external USB CD/DVD drive to boot from the Windows XP disc or the Toshiba recovery disc.

  But there is a method that allows you to install Win XP using the 2 GB USB key.
  This is possible because the NB100 BIOS supports booting from USB key.

  Pease check this Web page:

  + Installation of Windows XP using a USB Flash Drive.
  http://www.pctipsbox.com/Installing-Windows-XP-using-a-USB-flash-drive/

  Hope it could be useful.

• NB100: How can I get ACPI working under XP

  Hello world

  I wonder how I can get ACPI working under XP.
  When I enable it in the BIOS, Windows will not start... Should I load the drivers during the installation of Windows XP? That would lead me to my next problem, because the command line switch - one for the extraction of the driver does not work... Does not extract the files either.

  Or y at - there a way to add ACPI to my XP install is already running (the BIOS ACPI option is currently set to "compatibility"?

  Thanks in advance!

  As far as I know before enabling ACPI in the BIOS, you must remove the standard PC driver in Device Manager and install the ACPI driver.
  Then go into the BIOS, turn it on and should start Windows.

  In the Microsoft Knowledge Base, I found an article on the ACPI Compatibility:
  http://support.Microsoft.com/kb/314088

• How drivers of recovery system for the model of hp 2000-2d09SE

  Hello

  recently, I brought hp laptops with bones.

  details such as

  n ° SERIAL: [edited by Moderator]
  NR. ARTICLE: F0E23EA

  MODEL: HP 2000-2d09SE

  from: X-CiteMD shopping mall, Al-Kuwait, Kuwait.

  While installing windows 7, I formatted all means while I lost my system drivers (i.e. ethernet controllers, controllers wireles etc...)

  How can I recovery my drivers.

  Hello:

  You can use all the W7 x 64 drivers and software for this model, except the wireless and bluetooth.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275370

  Wireless:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_123851_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Bluetooth:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_125575_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• How can I exit the recovery mode when I updated to iOS 10? !!!

  How can I exit the recovery mode when I updated to iOS10?

  Connect the device to your computer and use iTunes to reapply the update.  It worked with my Pro iPad after I first tried to live update. He went into recovery mode, so I had to download the update in iTunes and updated (new), but he returned right after that.

• How can I put a device in recovery mode

  How can I go in on iPad recovery mode

  To put your device in recovery mode follow these instructions: If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• My laptop crashed and I lost my recovery key. All my favorites always appear on my android samsung galaxy 4. How can I recover my recovery key?

  My laptop crashed and I lost my recovery key. All my favorites always appear on my android samsung galaxy 4. How can I recover my original recovery key? I tried to delete my account and create a new one, as suggested, but now I get a sync error saying do not match the recovery keys. Also is there a way to export my favorites from my mobile device?

  Try [947177/questions/947177]

• How can I do for recovery Satellite Pro S300

  Hello...

  I'm Frman of Kurdistan of Iraq

  Thank you for this forum to take all the outfit.
  I want to help me to recover my laptop.

  How can I make recovery my computer toshiba laptop satellite pro s300 with all the driver but I the depletion of my data in my laptop for recovery.
  Can you help me? send me data recovery.

  Thank you

  Hello

  I don't know if your knees supplied with hard drive recovery:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  You can also order [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] price of Toshiba or get disk Windows Installer, all the drivers are available on [Page Driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• How can I get a replacement recovery DVDs

  Hi help!
  My restore DVD will not work.
  After restoration it boote, shows the blue screen of death for a split second restarts.
  I copied the contents of the dvd on another hard drive and a bootable dvd.
  It is just the same installs, but fails on the first restart.
  There is nothing wrong with the computer because I installed XP & it worked fine!
  Anyone know how can I get a replacement DVD

  Soon Paul

  Hi mate,

  first of all, could you please tell us what machine you have? I mean, without knowing your machine nobody can really help you with your problem.

  Regarding your question:

  Here´s a link to a hint of ASP to find nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Visit this link and ask the ASP new recovery media.

  Welcome them

• Re: How can I recover my MS Office key after the installation of recovery?

  I restored my computer (laptop TOSHIBA PORTEGE) using HARD drive recovery. Everything worked well and I want to have a new pc now. Unfortunately, I need to save my version of office and 4 digits on the back of my pc have been erased. How can I get the key?

  Thank you for every response.

  As much as I know Toshiba does not offer preinstalled Office product key. It's actually version 60 days.
  Either you use the valid license key if you have already registered it in the past, or you can check-in online.

• Satellite 220CS: How can I get the recovery CD?

  I lost my backup with opperating system win95 disks and need a new set (preferably win98) on diskette or cd.
  How can I get? If this is not possible the driver for USB port to help me already.

  Thank you

  Hello

  You can buy the CD from recovery of the ASP.
  Also, if you want you can install the operating system from the original Windows cd and then you can install the Toshiba drivers you will find on the Toshiba site.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Good bye