NB200-12N - FN keys do not work

Hello
I recently bought a Toshiba NB200-12N with windows 7 starter edition. Then, I upgraded the operating system to 7 Professional. Since then, flash cards have stopped working with the function key. I've done everything I can think et al. proposed that he used to always work.
I found the settings and the value to use with the mouse - what works now, but the Fn key doesn't seem to work. It does however work with the num lock and scroll lock keys.
I updated the BIOS, uninstalled and reinstalled flash card utility and value pack, downloaded the last of the toshiba site and still no joy.

Can anyone help with this. Its very frustrating and help would be very appreciated.
Thank you.
W.

Hello

I doubt that reinstall Flash Cards Support Utility and value added package couldn t help you. I had the same problem and after reinstallation of these two tools, it started working again.

First, you must remove value-added Package and Flash Cards Support utility. After that, restart your computer and clean Windows with CCleaner. It is a freeware tool that allows you to clean the registry and delete the key from there. After that do a reboot again and now install package of added value, then Flash Cards Support utility. A restart more and your FN keys should start working again. :)

Check this box!

Tags: Toshiba

Similar Questions

  • NB200-12N - USB port does not work

    Hello

    I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
    Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
    But does not work.

    Thank you

    Paulo

    If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

    Try reinstalling the chipset utility.

    By the way: two other ports work well, right?

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • Satellite L650 - 12N USB Ports does not work

    My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
    It shows a yellow exclamation mark on my system.

    I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
    Under the key USB gives error code 43, I do not understand.

    The webcam and the wireless card no more.
    This boot problem after a storm in my area some time ago.

    Please can someone help.
    Thank you
    Sani

    Hello

    > This problem start after a storm in my area some time ago.

    Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

    I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

    But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

  • A few Macbook keyboard keys do not work

    Hello

    I have the Macbook with OSX El Captian 2012 model running. The keys f, g, h, j, k, l will not work. Initially, when I hit these keys several times, they used to work, but now they do not completely work. AHT test ran and it is said that there is no hardware problem. I hit the option 5 times, but it would not have helped either. I noticed when allegedly struck ' key and hold, f - l keys work. Please help me solve this problem. Replacement of keyboard looks expensive.

    Kind regards

    Cédric

    Hey John,

    Thank you for being a part of the communities of Apple Support.

    It appears from your message that a line of F to L keys do not work correctly on your MacBook Pro. What I would like to, it's please use the keyboard on your Mac Viewer to verify that the keys are not currently recognized on your Mac:

    OS X El Capitan: use the keyboard Viewer

    If the problem persists, please reset your memory NVRAM-How to reset the NVRAM on your Mac- and report with your findings.

    See you soon.

  • Command + Option + P + R keys do not work

    Hello world

    I have a 2 models of macbook pro 2010. When I first got them I gave each a password firmware, but for some strange reason, one of them the password does not work! So I need to reset it. I read the forums where it says to remove 1 stick of RAM (fact), reset the SMC (which is), then hold down COMMAND + OPTION + P + R hown to reset the PRAM.

    Problem is to keep these keys does nothing. The macbook starts just to the top as usual. GRRR! It's infuriating! I've tried everything. I also met several other MacBook & macbook pro in the past when he had the chip of ram only 1 I tried to case.have, 2 chips of RAM, Exchange autour, new ram, and 3 other different types of RAM, still the same problem. I have 2 x 2 GB ddr3 1333 mhz in there. I tried chips to 4 gb and 8 gb chips as well. Why the these keys are not suitable? I just don't understand and it's very frustrating because it works just fine on the other macbook pro and the specification and even the model is exactly the same thing...

    I know that the keyboard is OK because the holding CONTROL + OPTION + SHIFT and the power button to do an SMC reset works very well. and Yes, I tried to connect a wired usb macintosh keyboard. These keys do not work either and I know that the keyboard is fine because it works on the imac. I find it confusing that google has no answer for that, surely someone else has had this problem?

    You can reset PRAM with Terminal too: http://osxdaily.com/2015/12/16/view-clear-nvram-mac-command-line-osx/

  • Tab and control keys do not work in Firefox (they work in other browsers) AND I went to a new keyboard.

    Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.

    Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

    (If you use it, switch to the default theme).

    • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

    Once you get the pop-up, simply select "" boot mode safe. "

    If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. It might help others who have the same problem.

    Thank you.

  • The Enter key does not work in the address bar; I have to manually select the icon ' go to ' since the upgrade to Version 10.

    I just upgraded to Firefox 10. When I manually enter a URL in the address bar, press 'Go To' does not focus, then the Enter key will not work. I have to manually select the arrow "go to" to navigate. Any suggestions?

    This could be the extension of AVG safe search. If you have installed, try disabling it. Instructions here: use the extensions to add functionality to Firefox

  • page up and down and the arrow keys do not work, they do on any other programs

    Page up and down and the arrow keys do not work or jump at the bottom of page.

    You may have accidentally entered mode 'Keyboard Navigation. The F7 key will toggle "Keyboard Navigation" on or off.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • CTRL keys do not work on Portege A600

    Both CTRL keys do not work in my Portege A600, I'm updating from vista to win 7 and I can´t use of keys CTRL times.

    in this thread talks about it, but have no solution

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40628

    I contact toshiba support but have no information on what it.

    What can I do?

    Diego

    Hello

    I think that your keyboard is faulty.
    Connect an external USB keyboard and check if both CTRL would work.
    If both work correctly using the external keyboard, then your internal keyboard should be replaced to solve this problem.

  • I don't know how i ' v, but I lost the toolbars at the top and bottom. [Alt] will not bring up the toolbar and scroll keys do not work. How can I fix it?

    I managed to hide the toolbars, ALL of them. [Alt] brings to the top of the toolbar so that I can change them. In addition, the [previous page] [next page], [home] and [end] keys do not work.

    You can have:

    1. Choose the Mode "full screen" or
    2. unchecked toolbars

    The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).

    If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Installed Tuneup Uitlitie and my control keys do not work

    Hello

    Since I installed Tuneup Uitlities my keys do not work.
    For example: I can't adjust the sound volume or toggle wlan with the keys F1 - F12.

    I already searched in Google, but I can't find a solution. Is it possible that Tuneup have uninstalled or disabled the Launch Manager? How can I install/activate this new?
    I can't find something.

    Hope someone can help me,

    Katja

    > Is it possible that Tuneup have uninstalled or disabled the Launch Manager?

    Never heard talk of launch manager on the Toshiba laptop computer, but of course, the FN buttons are controlled by special software.
    I put t know what system you are using and what laptop do you have but for example:
    Using the Win 7, value added package system and some utility Flash card access buttons controls the FN.

  • Qosmio F60 - Fn key does not work

    Hi all

    My FN key does not work.
    reinstalling the driver as PVAT have no effect...

    Thanks for your help.

    JM

    Hey Buddy,

    Have you reinstalled as Flash Cards Support utility? The FN keys to both tool and value added package.

    Again, you should check the site Web of Toshiba Flash Cards Support utility:
    http://EU.computers.Toshiba-Europe.com > support & downloads

    So uninstall old utility Support Flash Cards and then install the latest version of it.

    Check this box!

  • Satellite L670 Fn keys do not work after the upgrade to Windows 10

    Hello

    I ve upgraded my Win7 L670 to Win10. After upgrade do not work key Fn. is it possible to recover the functionality of these buttons in Windows 10.

    Wolfgang

    Hello

    Each cell function requires special tools and utilities.
    In the case of FN keys, Toshiba software controls this feature.

    But as far as I know that the Satellite L670 won't get any utility Windows 10 so probably this key will not work running Win 10.

    Here the details on the 10 Windows upgrade:
    https://Forum.Toshiba.EU/showthread.php?83832

  • Satellite P50-A-144 - FN + z key does not work after update Win8.1

    Hello
    a couple of months ago with windows 8, which became 8.1 with w. update, I bought PC toshiba laptop SATELLITE P50-A-144.
    Since then, fn + z key does not work, it says that light keyboard turns off whenver I press it.

    How could I solve this problem? It's my OCD tingle.

    Thanks for all the replies :D

    Strange. Something like that shouldn't happen. I updated my machine, but everything works fine.

    I don't know if this will help, but try to reinstall the driver of Toshiba system and function key utility Toshiba.

    You should find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
    Check it out.

Maybe you are looking for