NB550D WLAN is very low

Similar Questions

• Portege A200: Very low transfer wireless speed

  I have a router broadband wireless-B (brand linksys, model BEFW11S4 v4.0) and have problems connecting to it with the antenna WiFi integrated on my Portege A200. The connection is weak, with a very low speed (like a modem) transfer and also quite erratic, often dropping.

  It doesn't seem to be anything wrong with the antenna itself, as it has worked well elsewhere. The router also seems to be fine - in fact, I have a capable of achieving a good connection to it from my computer if I use a second antenna for a card PCMCIA Wireless-B.

  Can someone give me a clue as to what can happen? Y at - it a setting I should change, or is it possible that there is a mismatch between the laptop and the router?

  Thank you

  Hello

  Well, I guess for download and reinstall the latest WLan driver on the Toshiba site. This could help to solve this problem.

  Best regards

• Toshiba NB520 - very low WiFi signal strength

  Hello

  My new netbook Toshiba NB502 has a signal strength wireless very low compared to the other two netbooks used in my house.
  I tried to play with the Device Manager but can't see any obvious way to improve the signal.

  Any advice?

  Hello

  Go to Win 7 power management settings and disable for the WLan to save energy.
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Good luck

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Page Firefox blocks, led busy, very low cpu on some sites. I have an example.

  Firefox 41.0, win 10 Pro x 64.
  Recently (possibly before v.41) pages Firefox hang with very low cpu on some sites.
  Firefox itself is not hung, but for this tab, the indicator of the clock continues ticking.
  I open the problem while another tab has the problem.
  Some data on the website are generally displayed (context?).
  There may be a redirect/refresh any (full proposal).
  Note: in this case, the web site is grayed out.
  Example: https://www.code42.com/store/
  Problem is when I navigated to the URL above. Also occurred when I pasted the URL.
  Works in Version Chrome 45.0.2454.101 m.
  Working on board 20.10240.16384.0

  Note: right now, I'm trying to upload an image, the download is not finished. Ticks of the clock.

  I will try to present this anyway.

  I was about to follow the instructions in the above message, but tried the web site to verify that the problem continues. There can be no. I don't know what I've done (maybe I cleared the cache I've been poking).
  Anyway. Please close this incident.
  And thanks for your help.

• After upgrading to iOS 9.3.2,and volume is very low when the reception or appeal of the mine

  After the upgrade to iOS 9.3.2,and I hear very low volume everything without or receive calls. Either side can hear properly

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• HP 15 au006tx: very low speaker quality I can't hear anything

  Hello.. I bought a new computer hp laptop for 2 months... My laptop works properly... But the speaker is of very poor quality... If I here all important videos I can not here anything from here... The quality of the speaker is very low worm... very bad... If I put a full volume, it's just like a normal sound otherwise very bad sound... I need a good solution... Please help me what I have to do?

  In fact I need DOLBY speakers to my laptop... If possible could I change my B & O Dolby? How do change?

• Equium A200 1v0 - DVD Volume very low

  Hello!

  I noticed DVD playback volume is very low (even when the cursor of the volume on the drive and windows is max had). MP3 playback is very good and volume is much stronger, he just seems to be a problem with playback of the DVD. I tried a Toshiba DVD player software and Windows media player, but they give the same result.

  Someone at - it suggestions?

  Thank you.

  Audio controller: Realtek
  OS: Windows Vista editions Home Premium

  Hello

  I presume that you have played the MP3 from the HARD disc and movies from a CD/DVD player

  In the control panel - settings, you will find different audio audio controllers
  You must choose the reading and put all the controllers of possible sounds at a higher level.

  Best regards

• HP ENVY 17 Notebook PC TS: very low volume after upgrading to 64-bit windows 10, beats box has been deleted.

  My sound is very low and poor quality after the upgrade to windows 10, I've updated all my drivers, I chose the highest quality in the properties of the hd intel audio drivers, I checked the 3 volumes.  I should of never being updated... BIG MISTAKE!

  Thank you for your advice, sorry I did not take the solution to my problem was very simple, I had to wait for HP put the new update!  Following the solution, I went to HP Support Assistant, the trick here was to goto Support Section and not up to date on my Device option. In the Support section, I clicked on my camera since I went to the Support Center HP technology - software and drivers, then I clicked on check now. and Wallah all the drivers I need to solve my problems...

• iPhone 6 ear problem the noise I hear is very low

  MY mobile is iPhone 6 128 GB wi

  I have a problem with the ear sound I hear is very low and I can't control from the bottom side

• How to quickly get 100 + photos from iPhone in pictures on iMac with the download speed very low broadband?

  Hi all

  I have an iPhone 6 Plus running iOS 9.3.1 and a retina iMac running OSX El Capitan 10.1.4.  I use iCloud photo library and I like the idea of having all the pictures synced across all devices.  This works well for one or two odd photos I take here and there.

  I have just been on vacation and taken 100 + photos with my iPhone and want to create an album of photo printed on my iMac, but the problem I am facing is that it takes so long to get the pictures on pictures on my iMac.

  My download speed high speed is very low - on 0.3Mbit / s, so the photos are always download to iCloud from my iPhone now, and I guess it will be another day or two to complete.

  Is it possible to get the photos from my iPhone to the iMac more quickly without creating duplicates or spoil my library?

  It's so frustrating to have to wait 5 days after her return from vacation before you can start making a photo album.

  Thanks for any help,

  Kind regards

  Ben

  You can connect the phone with USB and import or use iTunes sync or Capture of Image - this can cause a problem with duplicates

  And of course, you can stop by a store StarBucks, Apple (or other WiFi hotspot with good service) and complete quickly

  LN

• Very low volume on Portege R500

  The volume on my R500 (R500 - 11 c to be exact) is ridiculously low. Only with the volume at maximum (100) and using headphones I hear nothing, and even in this case, it is far too low to be useful. I can just do the test sounds to the left and then good listener when using his test detected in Control Panel-> Sound-> speakers (there no helmet to choose)-> Properties-> Advanced-> test. Unplug the headphones I hear nothing in the speakers, because of the (very low) sounds made by the fan and HARD drive. Play music (with headphones) I can just do the sounds are produced, but I can't even on what is happening.

  I tried the things mentioned in the "Satellite 5105-S901 sound is very low (even at max volume) to aid driver Toshiba ' thread without success (including the Loudness equalization).

  I am running Vista Business 32 bit and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe and Vista_Win7_R243_x86.exe the driver files and also used the util_mute_off_25847B.exe utility.

  Enabling silent makes the already weak sounds go completely silent, so I don't think it's a matter of mute.

  Jack detection works, I can see that in the Realtek HD Audio Manager program. Using sound test of this program (Configuration of the speakers) I have to go to a completely silent, and even in this case I can't hear something on the right headphone. (I think, it's darn so low, that I could imagine I hear.)

  Decreasing the volume slider sound 100 harder almost inaudible noise similarly points out, and around 45 it is more audible even in a quiet room with headphones.

  So it seems that I somehow need to reset the audio chip in a 'normal' level Or it is broken and does not display anything more audible.

  Does anyone have ideas, what I can try next? I can boot XP or Linux, if anyone has any ideas on how to get her here, just to start. (They are silent as well, I did not like extensive tests under those as Vista).

  Hello

  According to your message, you have tried to increase the volume by using all possible options
  Have you tried to increase the volume in Control Panel-> Realtek HD audio manager?
  Check this box

  You also tried to update the Realtek audio driver.
  Did you use the Realtek page directly?
  Check it!

  If this will not help, you might try the laptop with the new system recovered

  But if this does not improve the volume, then this could be a hardware problem

• Satellite L50 - B fan works even if the CPU load is very low

  I recently bought a Satellite L50 - B and I made a Windows 10 updated. The problem is that the fan works even if the CPU load is very low and the noise bothers me a lot.
  I ordered the video card driver and the system tells methat driver is updated to the latest version.
  I don't know what I can do to change this sad situation.
  Please, please, could you help me solve the problem?
  Thank you very much for your support and understanding.
  I await your quick response.
  Thank you.
  Giovanni Spina

  What CPU temp? Probably overheating?
  Try to replace the thermal interface on the CPU. ;-)

• HP ENVY 17 F9M14UA #ABA TS: no audio beats since the upgrade to 10. St very low volume of the same volume at 100%

  Walking to Windows 10.  Loss of my audio Beats.  The volume is very low, so even than the value 100% volume

  Hello:

  See if reinstalling the audio driver solves the problem...

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• Very low emission Qosmio F50

  Hello world

  Recently my Qosmio F50 - 10z began to suffer a very weird problem. Often, the screen becomes absolutely dim. If I concentrate very hard, I see a picture very very low. Some external monitors when connected are well-lit and bright. The weirdest bit is that when this happens, I literally slam the lid shut and open the lid immediately to remake the screen light up.

  I know that it is either the inverter or the cable screen. My question is how can I know if it's the cable VGA or the inverter and where do I buy the part of!

  Help, please!

  Thank you!

  > The screen will often absolutely dim. If I concentrate very hard, I see a picture very very low. Some external monitors when connected are well-lit and bright.
  > My question is how can I know if it's the cable VGA or the inverter and where do I buy the part of!

  In my opinion it s inverter question a FL since the image on the external monitor is ok.
  The FL inverter controls the backlight of the screen and the sounds in question as FL inverter malfunction.
  You can buy and order all the compatible parts of a local ASP.
  The authorized service partner would be useful and could also replace the part.
  I would recommend this because the disassembly of the laptop is very delicate.

  Welcome them