NBHGui and not properly installed InCD cannot start

Cannot start the EROOR message NBHGui InCD eroor

Hello

You could try to reinstall Nero burning software, because these files are related to this program.

Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • InCD locker 'reader' could not be initialized. InCD cannot start. NBHGui InCD support is present but could not start. InCD cannot start.

    at the start of my computer: these two windows appear indicating "InCD cannot start.

    InCD is the former writing Nero software. It does not work. Uninstall from Add/Remove programs. If you've never used, leave it uninstalled as it is problematic anyway. MS - MVP - Elephant Boy computers - don't panic!

  • Try to install Topaz Denoise and Topaz Clean, getting the error "cannot access the windows service install. "This can happen if windows install is not properly installed.

    This problem arises when clean installing topaz denoise and "Topaz". I tried the fixes in this article http://support.microsoft.com/kb/2642495 and none of them seem to work. This problem arises when clean installing topaz denoise and "Topaz". I tried to install other programs, and the error does not appear anything else. I also restarted my computer, any advice on how to solve this problem would be appreciated.

    Original title: the windows service install are not accessible. This can happen if windows install is not properly installed. Ask your assistance technical assistance

    Hello

    Have you made changes on the computer before this problem?

    I suggest you try these methods and check the status of the issue.

    Method 1:

    Keep the computer in a clean boot, try to install the programs and check the status of the issue.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

    http://support.Microsoft.com/kb/929135

    Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

    Method 2:

    I suggest to try the methods mentioned in the following article and check the status of the issue.

    How to solve the problems when you install or uninstall programs on a Windows computer.

    http://support.Microsoft.com/kb/2438651

  • Message: Cannot perform this operation because the default mail client is not properly installed

    I get the following error message:

    Cannot perform this operation because the default mail client is not properly installed

    Could someone help me please?

    Moved from the community involvement Center

    Hello

    You have a common problem of Windows 7. You must set a default e-mail program and Windows 7 did not come with a pre-installed email program.

    The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

    Windows Live Mail is popular
    http://Windows.Microsoft.com/en-us/Windows-Live/Essentials
    Is Thunderbird http://www.mozilla.org/en-US/thunderbird/

    Windows Essentials help:
    http://Windows.Microsoft.com/en-us/Windows-Live/Windows-essentials-help

    You can access outlook.com via Windows Live Mail

    Set up an email application with Outlook.com - Microsoft Windows Help:
    http://Windows.Microsoft.com/en-us/Windows/Outlook/send-receive-from-app

    After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click on the arrow down.

    Web-based e-mail services can only be made the default e-mail program in these 2 cases:
    * Yahoo, with the Yahoo tool bar
    http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
    * Gmail with the installed Google toolbar

    https://support.Google.com/toolbar/answer/34800?hl=en

    Don

  • I cannot access the application "contact me" when a website, get error "Default Mail Client not properly installed."

    I cannot access the application 'contact me' when a web site and receive the answer "Default Mail Client not properly installed" instead of going on the requested site.

    How can I fix this problem?

    Separated from the:

    http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/IE8-default-mail-client-not-properly-installed/23c2a9e1-d1fa-4a50-aeb1-90a6f2af717f

    CrystalBall © SEZ...

    Unlike Windows XP & Vista, Windows 7 does not include a default email Client. [What were thinking?]

    You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In these forums, you will find support for Windows Live Mail: http://windowslivehelp.com/forums.aspx?productid=15

  • I started receiving messages that Windows Installer service is not properly installed when I try to install a program.

    installation of Windows in windows xp service

    I started receiving messages that Windows Installer service is not properly installed when I try to install a program.
    Running XP Home edition.
    I tried to install Windows Installation Service 4.5 but that doesn't seem to make a difference
    I also tried unsubscribing/re-enrollment msiexec.exe and that doesn't seem to make a difference.

    I tried to reinstall my HP scanjet 4890 software but complains the installation Windows installation service.

    Hello

    You did changes to the computer before the show?

    I suggest you try the steps from the following link:

    How to solve problems when you install or uninstall programs on a Windows computer
    http://support.Microsoft.com/kb/2438651#reso3

  • I get a message "Cannot perform this operation because the default mail client is not properly installed". What should I do?

    I get a message "Cannot perform this operation because the default mail client is not properly installed".  What should I do?

    Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

    You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.

    In this forum, you will find some support for Outlook: http://answers.microsoft.com/en-us/office/forum/outlook

    Note: Office 2010 Home and Student Edition is not include Outlook.

  • Cannot perform this operation because the default mail client is not properly installed... help

    I can't send an e-mail from a link on a page without getting this error... "could not perform this operation because the default mail client is not properly installed"...    My windows mail is set as default and I can receive and send him good, please help.

    Thank you

    A program is defined as default does not mean that it has considered all of the default roles available.  In the case of Outlook 2007, there are 13 total default values that can be assigned, and it should have each of them.  It is possible to default Outlook for e-mail, but not the default value for write links in web pages.

    HAL

    --
    HAL Hostetler, TCE
    Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
    www.kvoa.com - KVOA television, Tucson, AZ.
    Live Hot Licks - www.badnewsbluesband.com
  • When I try to use Windows Media Player 11 I get the message: Windows Media Player is not properly installed on windows vista

    Original title: MediaPlayer does not open. Followd Scout121 answr. Got the message: not recognized as int/ext control.  Help!

    I followed the directions for the question of Scout121, posted by Bikesh T 20 October 2011.  When I entered the "regsvr32vbscript.dll", I got the message: is not recognized as internal or external, command an executable program or batch file.

    We have Windows Vista Home Premium 32 bit version 6.0 (Build 6002: Service Pack 2).

    I received a validation code windows, but when I try to use Windows Media Player 11 but the message: Windows Media Player is not properly installed.   When I try to install the player form Microsoft Web site, I get the message that the installation has failed.

    Please notify.  We are clueless.  Thank you.

    Hello

    What troubleshooting steps you have done until now?

    Click on the link below and run the fixit.

    Method 1: Solve the problems of Windows Media Player video and other media or library

    http://support.Microsoft.com/mats/windows_media_player_diagnostic/

     

    Method 2: Disable Windows Media Player and then turn it on to Windows features and check if the problem persists.

    Disable and enable Windows Media Player and check if it opens.

    (a) click Start and select Control Panel.

    (b) click on programs and features.

    (c) click on or turn off Windows features turn on on the left side.

    (d) develop the features of media; clear the check box Windows Media Player.

    (e) click Yes and OK to continue.

    (f) restart the computer.

    Note: If windows media player is already disabled, follow the steps mentioned below:

    After the restart, follow these steps:

    (a) click Start and select Control Panel.

    (b) click on programs and features.

    (c) click on or turn off Windows features turn on on the left side.

    (d) develop the features of media; Check the Windows Media Player.

    (e) click Yes and OK to continue.

    (f) restart the computer.

    This would be re - install windows media player 12.

    See the link: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

    Method 3: Perform scan of SFC (System File Checker) and see if the problem persists.

    http://support.Microsoft.com/kb/929833

    Let us know the status of the issue.

  • Error at any time update or download - "windows service install could not be found windows install is not properly installed.

    Windows automatically attempts to update and restart the same updates again and again, now it does not update Safari either.

    I have the Fix it Center, but it is not solved the problem

    IT IS NOW TELL WINDOWS SERVICE INSTALL COULD NOT BE ACCESSED, WINDOWS INSTALL IS NOT PROPERLY INSTALLED.

    Make sure that the Windows Installer Service is started:

    1. Click Start, type Services.msc and press {ENTER}
    2. Double-click on Windows install
    3. The Startup type of Windows install the Manual value
    4. Click Start to start the service.
    5. Click OK.

    If there is an error message, write it down and post back if not try and make the updates again.

    See also: Fix the problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

  • "Could not perform this operation because the default mail client is not properly installed" when you use Windows Mail

    Original title: loss of entrance of Protocol in the list of saved files

    I use an old Toshiba laptop of two year with Vista as an operating system. It came with a trial version of Microsoft Office already installed. I had no use for it then after the trial expires I uninstalled. This seems to have created a minor problem with the e-mail program. When I visit a Web site and click on 'Contact us' I get an error message as follows "cannot perform this operation because the default mail client is not properly installed." I suspect strongly as during the uninstallation of office he removed a protocol in the list entry, similarly, the bottom of the list of the saved files. A check with other similar computers with Vista installed seems to confirm this. If someone at - it a quick fix to this problem? I don't want to resort to installing a whole new email software to fix this minor problem if I can avoid it.

    Hello Karena R, yesterday, I downloaded and installed Windows Live Mail, and I must say that I prefer Windows Mail Live Mail program. After making sure that Live Mail is the deafult for all messaging functions and that the entry "Mail Protocol" was now back to the list of saved files, I checked the problem mentioned in my original post. He is not fixed! Another small problem is fixed now if. In my "drafts" mailbox I have some e-mails stored there and when I click on one of them upwards now comes an email with the appropriate address inserted in the address line. Who could not before. I used to get this error message, which is now the new title of my post. So why the difference when I click on email address that I find on Web sites? Now, I also find that by Michael following the instructions (below), I do not see an entry "mailto" but his suggestion to step d. type in "URL Protocol" is not appropriate because it is already there. The installation of an entirely new email software should have my computer all the necessary entries for the new program to function properly in all respects. So what's happening? It begins to look as if uninstalling the program Office has pulled something real Vista operating system.

    It's a good thing, I thought of the research on other boards for my missing post.

    HKEY_LOCAL_MACHINE\Software\Classes\mailto

    c. in the Edit menu, select new, then clickstring goodwill.

    d. type of Protocol of URL as the name of the new string value

    e. exit the registry editor

  • The windows service install are not accessible. This can happen if windows install is not properly installed. Please contact the support staff

    Whenever I try to install a new version of Java, but also apply for income tax, my computer basically freezes and I have to stop it manually after that I finally get the message "cannot access the windows service install. This can happen if windows install is not properly installed.  Please contact the support staff.  I tried MSI 4.5 but everytime I try to download, I get the prompt "not applicable to your system.  I'm running on Windows Vista basic and I tried to cancellation of the registration of windows install and re save, but nothing seems to work.  Extremely frustrated

    Hi confused79,

    Thank you for your message.

    Here is more information on the use of file system (CFS) Auditor:

    http://support.Microsoft.com/kb/929833

    You can also create another profile to see if the problem is the result of a corruption of your current profile.

    Here's how:

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Default mail client is not properly installed. How can I fix it?

    I have a Windows 7 Home Premium desktop computer. I've been running Internet 7, I don't know how, but he jumped at Internet 8 so that's what I use now. I have no problem getting my Email or mail. There are just some Sites that I click on that I have a Popup that says "cannot perform this operation because the default mail Client is not properly installed. Why did I get this Message only on some Sites and not others?  Someone has an answer for this?         Thanks for any help.   Odell Whitman.

    There is no Internet 7 or 8 there is IE7, 8 & now IE9.

    IE9 is released in 2011 and should be installed via windows update some time ago

    Win7 contains no default e-mail client, you must install a

  • Message: "default mail client is not properly installed.

    I deleted several programs to get more system memory. I tried to restore my system to an earlier date, that date of was not available for a restore. Then when I click on the email toolbar icon I get an error message "could not perform this operation because the default mail client is not properly installed". What should I do to restore this ability? My OS is Windows XP Professional.

    Separated from the:

    http://answers.Microsoft.com/thread/3a1bb736-D208-406a-A8F8-e9dd2d8e73fe

    Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Select the option for Outlook Express. Also in Add/Remove Windows components, make sure OE is checked.
     

    Making OE the default e-mail client:
    http://www.oehelp.com/oedef.aspx
     

    For the links in the email:
    http://www.oehelp.com/oelnk.aspx
     
     

    Restore OE to e-mail clients list in Internet Options
    http://www.dougknox.com/XP/scripts_desc/oe_client.htm
     

    If you have installed MS Outlook, see also #13:
    http://www.oehelp.com/OETips.aspx#13 
     
     

     

     
  • by not properly installed default e-mail client

    When I try to open a link I get a pop up that says default e-mail client is not properly installed. How can I fix it?

    Hi mecca08,

    ·         Which email client you are using?

    ·         What is the full error message that you receive?

    If you get this message in Microsoft Outlook, you can follow this link & check if it helps.

    A new message window does not open when you click on an email to post a link on a Web page in Outlook

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Satellite L450D - 11 H - WLan works does not during the execution of a battery

    Hello world I have a portable Satellite L450D - 11: running the Windows 7 operating system. When my laptop is plugged my wireless connection works fine.But when I unplug the unit and just run using the battery, my wireless connection works. I examine

  • What should I do with my project created under Labview 64bits?

    Given that I have started using a new PC with Windows 7 x 64, I start to build my project in labview x 64. It was more than a year and the project involvoes there are a few cameras, IO, etc.. There are problems, such as some devices that I use labvie

  • (outlook 2003) send/receive emails

    Why do I continue to receive the same emails over and over again whenever I click on send/receive? This does not occur when I access emails through my ISP

  • Dell Powerconnect 6224 Default VLAN VLAN reference and management

    Hello two questions- 1. what exactly he wants to tell the VLAN by default is not routable or VLAN 1 is not routable? I can connect to my 6224 a different subnet and its got nothing configured except default values and an IP address to this VLAN 2. I

  • Threading in extension of blackberry widget

    Hello, I am new to blackberry widget development. I created an extension that allows me to get a precise gps location, however my application hangs while he does this, how can I implement threading in my extension. I searched for days and has been un