Necessary protective case for NB100

Similar Questions

• A protective case for an iPhone 5 c will fit the new iPhone SE?

  A protective case for an iPhone 5 c will fit the new iPhone SE?  In the products section, there are cases that say they will fit the iPhone 5, 5 s and SE.  They would hold a 5 c as well?

  No - the 5 c is slightly different. The volume buttons on the 5 c are long and thin, but they are circles on the 5/5 s / SE.

• Protective case for Sansa Clip: Suggestions?

  I picked up a 8 GB Clip today ($50 Wally World special). Any suggestions for a protective case?

  A lot of discussion on this point - you can use the search box above.

  Here is a recent and helpful thread.  http://forums.SanDisk.com/Sansa/board/message?board.ID=clip&thread.ID=15493&view=by_date_ascending&p...

• Do I need a case for my Apple Watch?

  I just bought the sports watch (38 mm with Silver Aluminum case) and I'm trying to decide if I should buy a case. I know that watches are made to be durable enough and I really prefer not to sacrifice the design but I'm worried that I would need the case. I work a lot and teach fitness classes - a case would be useful in the watch of sweat and bumps protection against equipment? Colleagues who have the shows say they are ok with a case, but I'm worried he might get banged up in the gym. Also, I work in a restaurant, and think that the case might help against protect them against damage from water. Any advice?

  Hello

  The answer to your question is a matter of personal preference.

  It may be useful to read the comments of the protective case on a site like Amazon.

  Issues with Apple Watch cases / protectors (in general) understand that they can, for example: fall pretty easily, reduce the sensitivity to touch, scratch quite easily get moisture dirty (on the outside), trap or trap small items of debris under them (which can cause scratches on the case or display).

  With the help of a case can make it also more difficult or less convenient to monitor your own and dry. Cleaning and drying of your watch are recommended, for example, after exposure to sweat and other liquids in order to maximize comfort and avoid damage to long-term of the watch.

  More information:

  Cleaning and port Apple Watch - Apple Support

• Is there a case for the flame?

  I was wondering if there is a case of protection for phone torch OS' Firefox?

  Hi Krampstudio,

  Unfortunately, there is no official case for the flame device I know. =(

  If you (or someone you know) is very convenient with the hook, one of the contributors to the Brazilian community created instructions handy for this case Foxy:

  • https://github.com/mnmo/fox_costume

  -Ralph

• new case for hp m9450f

  Hey I wanted to get a new case for my m9450f anyone know if:

  1 card mother using stand offs or is it directly bolted to the rear of the case?

  2. the I/O plate comes off or is it attached to the case?

  BTW I plan to get the corsair 600t, the plate of I/O is not a big problem, but if the Board is screwed into the case is anyway I can transfer the motherboard for a new case.

  Motherboards generally use spacers though some cases have accumulated mounting plate for the motherboard and spacers are not necessary.

  The I/O plate if I understand you well is part of the motherboard.  Most mATX cases should not be a problem.

• Best case for the Droid

  Looking for advice on the case for the Droid.   Bought BodyGlove and quite easily broken top.  Now the lower lid did the same thing.  The ideas people?  Want you are looking for something good, but the study and functional is more important.

  + 1 on the otterbox, big deal that prevent the lint from your ports, back is easy to remove and install, saved my droid several times already.

  skinome is a protective film wrap that fits in the docs and car mount.  Best screen guard, I used but wrap does not give me the need to shock to labour protection.

  Currently using skinome protection screen and OtterBox, removing when mount dock or car.

  Kind regards

  CaptainKGB

• Tips on how to make a business case for partitioning

  Hello world
  
  I am the architect of a team of business intelligence/data warehouse. We have grown to the point where I think that we need database partitioning. I believe that we are at approximately 1.5 TB of data. Our larger tables are the counts of 100 million lines with relatively large lengths Records (~ 100 columns). Our just a sort of large tables are of the order of 10 million to 50 million, however, they have very long line lengths (~ 300 columns). Based on the plans of our future source system, our data will become even more granular, and it is always necessary to maintain our historical data.
  
  Those who are not the only reasons, but are some conduct issues that make most of our team members think it's time we purchased database partitioning. Our team is fairly unanimous for partitioning, many of our partners from the source system also deem an 'evidence', however, we get a push back of our CIO saying that 1.5 TB and 100 million records is not only the large amount of data compared to other 'big Data' businesses and that it requires no partitioning.
  
  Anyone has any advice on how to make a business case for the purchase of partitioning? Is there a good way to demonstrate the value of profitability-vs?
  
  Thanks for your comments.
  
  -= Joe

  The best cost c. analysis of benefits is that you put together based on points regardless of the pain you feel.

  For example, you have pain around your evening of meeting load ALS? If you do, you can watch how (and if) partitioning would allow you to streamline your loading process and how much time you would save probably every night. If you have no problem hitting your evening load ALS today, however, this probably isn't something you want to focus on.

  You have pain around query response time? If Yes, you can watch how (and if) partitioning would improve some of the queries and most important reports. Or, perhaps, he would have you to allow users to do an ad hoc analysis more than you can't afford today because the cost would be prohibitive.

  Although you will find no doubt generic cost v. benefit whitepapers, it tends to make a much better case if you focus on what causes the pain of the company and what you as the application developers are willing to commit to. It is easy for a CIO watch a generic white paper saying "partitioning reduces ETL time up to 99%" and the question of what improvements he or she would have actually see and how this is marketing hype. It is much more difficult to look at a document put in place by the data warehouse team saying "partitioning would allow us to reduce the load of X of Y hours on Z hours every night. "That would allow us to hit our SLA w % more often without adding hardware / additional treatment for A project that we have been postpone / let Department B start to work with the data more early every morning / what causes the pain of the IOC. Of course, this means that he must be willing to make such commitments (and, of course, to meet).

  Justin

• Compatible cases for handset of flame

  With regard to the archived thread https://support.mozilla.org/en-US/questions/1014911 I found that the LG Optimus SU640 LTE handset has almost the same size as the reference to flame handset. I ordered a case for this particular LG phone and it fits the phone of flame without problems.

  Get a case was the only issue preventing me to use flame as my phone handset every day, so I hope that this info is useful for others.

  Hi danielhjames,

  Thank you very much for your comments and share this great piece of advice! =)

  -Ralph

• What case for a Satellite U840 - 10 X?

  Hello

  I just bought a Satellite U840 - 10 X, and I can't find a case that stops the laptop firmly without adding too much height.

  I found some cases for computers laptops 14 "but they have all 4cm of space on the inside, allowing him to move inside.
  The size of the U840 is 34.2 x 23.2 x 1.99 cm.

  Someone at - he found a good one?

  Thank you!

  Hello

  I found a few compatible cases for Satellite U840 / U845

  Advantage for computer laptop backpack Outdoor 40.6 cm (16-Zoll) PX1783E-1NCA
  Advantage, case 40.6 cm (16-Zoll) laptop PX1784E-1NCA
  Advantage Laptop Case Pro 40.6 cm (16) PX1785E-1NCA
  Advantage portable Trolley 43.9 cm (17.3 inch) PX1786E-1NCA

• Need soft case for my booklet

  I use my booklet for 4 weeks but miss me a soft case for the transport of my book. For the time beeing a fact a softcase by myself. Anyone know if there is something standard available on the market for the book?

  Hello

  Well, I found often enjoyable for booklet. For example:
  1.) Toshiba solid case Part Number: PX1113E
  2.) satellite XXL case part number: PX1133E-1NCA

  All compatible parts, you can find on the official website of Toshiba.
  http://EU.computers.Toshiba-Europe.com/--> Products--> Option & accessories

  Good bye

• What is the point number (spare part) protects cable for ILÇE-7RM2?

  What is the point number (spare part) protects cable for ILÇE-7RM2?

  I'm looking for this part:

  http://Helpguide.Sony.NET/ILC/1520/v1/de/contents/image/b_cableprotector.PNG

  Thank you

  Michael

  I discovered, that it is the part number:

  Cable protector: X-2591-933-2

• Case for Satellite click on L9W Mini-B

  Was looking for a case for Mini click for a while, all I could find were netbook 10 "business that were too big. Came across this Case Logic

  It's a perfect fit, Tablet is very tight when zipped. On the inside of the case is a stand which folds that you could cut it with scissors, but the Tablet fits anyway so I don't bother, it adds extra padding.

  Hope it will be useful to others. Mine was bought on Amazon UK for £2.95, but I don't know there is no other sellers in the world.

  Message has been modified: commercial link has been removed

  Thanks for sharing!

• cases for CLIQ 2?

  Have they ever made of these if yes have you can find today? I got lucky today my cat yet my phone from my office and it hit the ground, it works always, but maybe it was just a lucky fall so looking for a case for this phone if they make them again. None of my retaile stores make them here if someone has an idea? Thank you all and God bless.

  Amazon has still a fewhere.

• Where can I find a hard case for original ipad (1st generation)?

  My boss is looking for a replacement for its former case rigid ipad (ipad 1st generation).

  He refuses to use anything other than the original case which was sold by Apple, but I'm having a very difficult time tracking online (amazon, ebay, etc.).

  Anyone know where I can find the former stop?

  Thank you!

  Sincerely,

  SYD

  If it isn't on Amazon or eBay I doubt it's anywhere. These cases are 6 or 7 years and at the time current technology, positively ancient.

  I have a case (not Apple, but a wallet leather one) that I bought when I bought my iPad 2 (bought the case for one because it was cheap), but the terms of use forbid me to exchange information or sell it here.

  You could look on Craig's list or put an ad.

  Or it may need to change its preferences and start using a universal case.  I seriously doubt Apple is what makes them most and probably were not years.