Someone at - he put wireless printer in place with the iPad pro? If for information and advice would be much appreciated.

Similar Questions

• HP Photosmart Premium C309 printer needs help with the iPad

  Hello

  I'm a bit confused about what printers are supported by the new AirPrint Apple via the iPad.

  I have a so-called ePrinter Wireless: HP Photosmart Premium C309g-m, which can not be found on iPad by Airprint.

  This printer is using the Airprint?

  List of HP a Photosmart Premium e - AiO (B310), but I'm not sure if it is the same printer and what vs B310 C309 printer same or different?

  If my C309 actually supported Airprint - why it doesn't work with Airprint?

  C309 is not supported - will be when it happens and how?

  concerning

  Michael Iversen

  We can always use c309g printer with the iPad. All what we need to do is install HP iPrint app iPad and use it to print as the printer must be connected wireless.

  iPrint - iPhone, iPad, iPod

  http://support.HP.com/us-en/document/c01616126

  iPrint - Windows mobile, Nokia, Android

  http://support.HP.com/us-en/document/c01931972

  About AirPrint, visit the following link for printers taken in charge from now on and how to use it:

  http://support.Apple.com/kb/HT4356

• printing on network with the laserjet pro 1606dn

  LASERJET PRO 1606DN don't PRINT IN win 7 64 - BIT MODE ON NETWORK.    32-bit print on correct network on an another win 7

  McAfee personal firewall necessary coil checked, you have to dig deep into the settings.

  Both printers are ok to print over the network.

• A printer that works exclusively with the iPad 2 air without a computer

  can someone suggest a printer that works with the iPad 2 air without a computer at all

  AirPrint printers must be able to do.

  AirPrint allows to print from your iPhone, iPad or iPod touch - Apple Support

• Improved connected IPad Windows10 private WiFi network w/AirPrint printer. Bluetooth is disabled. Try to print an e-mail, the IPad can't see printer. Android phone works wirelessly with the printer.

  IPad on the same wireless network private Wi ' Fi as computer windows 10, Android phone and Samsung printer airprint. Blue tooth is disabled. Can I wireless print with Android mobile phone, but not with the IPad... suggestions.

  Have you tried to reboot your router? Unplug it, count to 10, plug back in and let it boot and see if she sees the printer now. You might also want to disconnect/reconnect your printer, leave everything to make a new connection.

  You can also force your iPad to restart. Hold down the button sleep and home for about 20 seconds. When you see the silver Apple, let go and let it restart.

• The WPS54G Wireless Print Server works with Vista?

  The WPS54G Wireless Print Server works with Vista? I have a new Dell Vista laptop and unable to connect to the print server. The other XP machines on my network will connect correctly.

  I just got credit working mine in the answers above with a few small differences.

  1. Add the appropriate printer from the control panel > printers > add printer

  2. Select local printer, and then select [Create New Port] > [Standard TCP/IP Port]

  3. [device type] > [TCP/IP device]. Host name or IP address must be the IP address of the print server device.  I use a linksys router and difficulty mine to 192.168.2.10.  Check and are not [query the printer for and auto...]

  4. once nothing is detected, select [custom] > settings

  5. Select LPR, L2 the name value in the queue for a USB printer.  Turn on [LPR active of counting bytes.  Queue names are distinguished by the printer and I think as Mfg ("queue name" search and replacing your printer for queue names.)

  6. Select the Mfg and printer

  7. If the test page does not have a last thing, it is turn on [Control Panel] LPR Print Services > [programs and features] > [activate Windows features ON OFF] pane.  Go to [Print Services] and check on [LPR Port Monitor]

  Hope that makes the magic for you.

• Dell V313 printer cannot communicate with the computer

  When I try to print from my Acer Aspire Windows 7 on my dell v313, I get the message "communication not available - the printer cannot communicate with the computer. It's already happened, but when I restarted the computer it would print. Now, it won't. I replaced the USB cable and downloaded the last Cabinet V313 - and the software. Ink cartridges are filled. I am holder of a horse's hoof and a 4 leaf clover; but nothing works. What can I try now? Thanks for any help,

  Mike

  Mike,

  You can try to disable the ToolTips of printers. If the printer is wireless, try channel 11 in your wireless router. You can also try to remove computers printer scan list and then restart the computer and see if it prints.

  Start, Control Panel, devices and printer, your printer, printing preferences, advanced, more control options. Tell him to never show. The problem with this setting is that you can not tell if you are weak of ink, printer jams, etc..

  

  Rick

• Restrictions does not not after ISO put 10.0.1 update with the new iPhone 7

  Restrictions does not after ISO put 10.0.1 update with the new iPhone 7 any which option of ranking app I don't choose no changes are made.  All the patches?

  Thank you

  Hello Launcher,

  Thank you for bringing your question about Restrictions here in Apple Support communities. My understanding of your question is that you change the Restrictions, but no change is noticed. I tried the same on my iPhone 6 Plus running iOS 10 and noticed a similar situation. Please allow me the opportunity to explain how the Restrictions is designed to work. First, I put my limitations for applications, do not allow Apps and together 4 +, which basically means everything beyond 4 + will be blocked from buying. Then I went to the App Store and the first app that caught my attention was NCIS: hidden crimes. This app is rated 12 + and is definitely an application I would not want my toddler to help. It is that Restrictions come into play. When I type on NCIS: hidden Crimes, the Get option is grayed out. Restrictions does remove all apps, songs, books, etc. from view, but it will prevent the purchase, download, and install all applications rated above the setting you choose when you set up restrictions. It's the help article that discusses the Restrictions and prevent purchases: Use Restrictions in order to avoid buying on iPhone, iPad, or iPod touch.

  I checked on the restrictions help articles, and I understand where it can be a bit confusing. In the help article Use Restrictions on iPhone, iPad and iPod touch, it says "You can use Restrictions, also known as parental control, to block or limit specific applications and features on your iPhone, iPad or iPod touch." This means in fact that apps, features or services (rated above that helped you, or if you have turned off completely) can he no longer appears on the device if the restriction is activated and starts blocking them. I also tested this by activating Restrictions and turned the cursor for Safari to off. When I went back to the home screen, Safari doesn't show any more and I could no longer use it.

  I hope this helps to clarify how the Restrictions. If my understanding of the issue was not accurate to the issue that you are experiencing, I will be happy to pursue this issue with you. Please indicate exactly what you took measures, and what expectations you had or the some restrictions, applications, features, or services you are restricted. Thanks again and have a great rest of your day!

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• The Dell printer cannot communicate with the Dell computer.

  It seems that suddenly my Dell AIO 942 printer cannot communicate with my Dell Studio 17computer.  These devices have been the transparent connection until two days ago.  I've set up a restore point, I installed the drivers, unplugged and re plugged 110 s and USBs, used different ports and I still have the same, printer cannot communicate with the State of the computer.   Copy and scan functions are good, Windows Vista operating systems.  How can I find these devices to their previous state of communication?

  Jesse,

  Thank you very much for the detailed information. It really give us a head start trying to solve the problem.

  Please answer these questions to get more clarity-

  (1) what are the other steps in troubleshooting tried by you so far?

  (2) other changes on the computer that I should know about?

  In the meantime, I have you refer to items offered on the Dell website - troubleshooting

  http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-942/research

  You can also have a look at the Microsoft article as well-

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Get back to us with the results.

• HP Deskjet F2210 printer will not print my documents with the exception of my e-mail highlighted

  HP Deskjet F2210 printer will not print my documents with the exception of my e-mail address highlighted who is on the document, it is not cartrages, as it will print one page black and multicolor of the internet. Help, please.

  If you found problems with print quality with the only printer without printing from the computer, then it is a hardware problem.

  You may need to contact HP (1800-474-6836) support. Looks like a print head may be bad or needs to be cleaned manually. I don't think that this printer has a detachable printhead to clean manually.

• Adobe will not be printed. Comes with 'the document cannot be printed""there not selected pages' ideas on how to fix?

  I am running windows 7 and a network printer.

  It prints very well with the other stuff.

  I tried to load the latest version of Adobe Reader, but still no action

  Hi Ridgy1229,

  Try the following: open Adobe Reader go to edit-> Preferences menu

  • under Documents, change "Show the documents in PDF/A mode" Never
  • under the (enhanced) protection, clear protected at Startup Mode

  Restart the drive & try to print.

  Kind regards
  Nicos

• Please can someone tell if I can use my creations with the tool shape in Photoshop, commercially for example on t-shirts? [was: on]

  Please can someone tell if I can use my creations with the tool shape in Photoshop, commercially for example on t-shirts. Thank you.

  Yes.  No problem.

  [EDIT]  I decided to qualify that.  No problem with forms that come standard with Photoshop, but just about every logo, symbol of the brand, can be downloaded in two vector forms and brush presets.  It would be another story, obviously if you have used this kind of work, but you knew I'm sure.

  

• HP C4780 wireless set in place with Snow Leopard

  So I bought the HP C4780 printer since it's wireless and said it was easy to use.  Well up to now which seems wrong.

  Here is my set up: MacBook Pro under Snow Leopard (10.6.2), Airport Express model A1264 (establishing an access point wireless in my office of the ethernet connection) and the HP C4780.  I know that the Airport Express Terminal works since I can access the internet and the rest of the office network.

  Can I use the C4780 fine if I connect it directly to the MBP by USB, but I can't understand for the life of me how to connect wireless (and I don't want to connect the USB cable of the Airport Express Terminal... they are too far away without buying more cables and bat so to the point of wireless!).  All the instructions provided with the printer speak to insert the disc in place and following the installation of HP, but there was a big sticker on the box saying NOT to use the drive as all drivers are part of the leopard to snow... so basically, the instructions are useless.  Then when I look online I see no instructions specifically for Snow Leopard.  It's very frustrating!  I spent all day trying to make heads or tails of the instructions and could never make it work.

  Does anyone know of some easy to follow set up instructions?  Thank you!

  Try to use the method of the WPS (Wi - Fi Protected Setup) button to connect your C4780 to your Airport Express Terminal.  This linkshows how.

  To activate button WPS on your C4780 method, press:

  • Scan
  • Wireless menu
  • WPS
  • Push button
  Message edited by Wi-Fi-Guy 24/11/2009 15:51

• Cannot set up and install a wireless printer. HP Photosmart the 427 UDP Port

  I know this question has been posted several times, and before I go, I want to report that I was researching spending last week and try every possible solution I've read. So I hope that someone can offer some new or still has outstanding question.

  Equipment: HP laptop, Windows 7, HP Photosmart Plus B209 all-in-one, Netgear WNDR3700 (Dual Band), Norton 360 Antivirus/Firewall

  My laptop and printer are both about two years. I have the wireless printer set up in my previous home on a different network (more old netgear router). No issues what so ever.

  So I recently moved into a new home, bought a new router and set up a wireless network. Everything works fine without thread; two laptops, xbox, ps3, tv, cell phones, etc.). I finally had time to set up the printer. USB works fine. But it can not configure for wireless use. I get the infamous (together with HP printers) error message that my computer cannot communicate with the printer and I need to open port 427 UDP. Tried twice more, but no dice.

  Uninstalled all HP software and the printer driver and re-downloaded/installed the latest things from HP website. Tried to install the printer and Wireless Setup again, but still no dice. USB works fine.

  And there began my long trip. Here is the list of things that I did without success, and I'm sure I did right. Turn off my firewall (norton and windows). Opens UDP Port 427 (norton and windows). 427 on my router (port forwarding) open UDP port. Maunally added the printer through windows as a wireless device. Manually add a network printer.

  I still get the same error of UDP port 427. Please PLEASE help me. tI really want to fix this and refuse to believe that something as simple as it is not repairable. Printers are cheap and I don't mind buying a new one (not HP), but I have enough stubborn to give my with trivial issues such as this.

  Hello

  Thanks for the reply.

  I suggest you contact HP support for help.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Hope this information helps.