Need advice on conversion of H.264 DSLR images in another format for editing and stabilization of Warp

Similar Questions

• LightroomCC2015 just disabled use.stating I need to purchase a license. I'm running on the plan for this and other applications. How do I fix this, please?

  LightroomCC2015 disabled just use of the develop Module. Indicating that I need to buy a license. I'm running on the plan for this and other applications. How do I fix this, please?

  Please see the troubleshooting section below.

  Reference: creative judgment Cloud 2015 to return to the mode of trial

  Let us know if that helps.

  Kind regards

  Mohit

• Need advice. Is it necessary to put images in folders and subfolders with LR?

  It seems that the concept of spending hours to put the files in folders, subfolders, and sub-sub-folders is not necessary with LR. Creating all these folders takes hours, especially if you're like me and need a major reorganization of the Organization of the image. My thought is that all images can go in one massive folder as long as they are properly labeled. I can then use smart Collections LR essentially practically organize all my images. I can create a lot more sort options using smart Collections that I can by putting images in a folder. This goes against everything that I've learned about storing data on a computer, so I'm nervouse to head in this direction because it starts with unorganizing my files and remove all tags, so I can start again.

  I don't want to take it only to learn that I don't think a gotcha question. One drawback is that you are now committed to find anything using LR or tags only. What do you think?

  The folders do not exist. These are theoretical things. The operating system puts the files anywhere he wants on the disk, not even close to areas much of the time. He knows where the files because it has an indexing system.   So, if you have a c:\folder\pic.dng file and a c:\folder2\pic.dng file they are simply different names since what we call the path is really just a long file name. If you have saved the same 2 files c:\folder\pic.dng and c:\folder\pic2.dng it is again just another name of file and that's it, the same operating system and its index. The files in the same "file" will not be next to each other on the disk.   It follows that putting all your files in an important file or a series of smaller is all the same thing for the computer. If it has some significance in your mind, then put them where you want. It's of course still less difference in Lightroom, which is a database pure not concerned with the positioning of all physical, even up to what and where the storage media.  There is no limit to how many files, you can put in a 'folder', of course, despite what some think. This notion is a holdover from limitations of older operating systems and their capacity of memory addressing.  In terms of organizing files, that's what Lightroom for them and the keywords and structure should come from those and exif. Since these are incorporated into the files themselves and are pretty well standard, they will not be lost if Lightroom goes belly up. I can even read mine in several other programs that I use, so I'm not afraid of losing their organization and structure. And with daily backups of our precious files without fear of losing the LR catalogs or the other.

• What kind of ADOBE I need for editing and exporting PDF files

  What kind of ADOBE should I get mount and export PDF files

  Acrobat.

  Be well...

• Need a laptop for video and have no direction... Please help!

  Hello

  My name is Bryan Troxell and I just started the film school this week. After attending my first edition courses, I learned that we would use Adobe Premiere Pro as our choice editing program. This opened my options for the purchase of a laptop computer that I had previously reduced my research based Apple laptops. Now I have the dilemma of trying to find a portable workstation for video editing that will last me up to the school and beyond. I am open to the windows and apple devices and I have a price range for about $2,000, including taxes. I live in Washington if really my purchase to be around 1800 or lower for me to stay within my budget. The reason for which I need a laptop as opposed to a desktop computer is the neccessity for mobility and the ability to change so that at school (which has surpassed the imac models) and at home. I'm looking for maximum mobility and a strong autonomy. I hope so for a class of 15 inches at least 5 hours of autonomy. If this is not feasible in my range of price, then as close to him as possible. I guess that I am asking for help because I have not sought a computer in almost 3 years now and have no idea what I'll need more than a processor quad core, minimum of 8 GB of ram and a 1080 p screen. I hope that savvy here spirits can point me in the right direction.

  Any help would be greatly appreciated.

  Thank you

  Bryan Troxell

  A lot depends on what Quad Core you have ie model of architecture. A Quad Core 2 not manage much at all while the Ivy Bridge or especially a Haswell Quad Mobile will manage as much as a Gen 1 I7 workstation.

  Eric

  ADK

• Update video card: 630i Desktop - need advice

  I have a Dell XPS 630i Desktop 5 1/2 year, which usually is going very well, with enough power for most of the cases.  Recently implemented a 125 GB SSD as drive operating system.

  Anyway, in these last days, we got some random video artifacts appears sporadically on one or two of my two monitors Viewsonic (DVI for both of the Nvidia 9800GT 512 MB video card).  A small section of the screen will have the weird characters, sometimes a bunch of screen Flash, etc.  And a few times that there was a BSOD crash, with the video driver (nvlddmkm.sys) be responsible.

  I tell myself that there must be a bad video card or driver.  I have updated to the pilot the most recent on the Dell site (R213185, 181.30, Vista 64, A04) and well.  But I have this vague feeling that it is a hardware problem.  If it was a driver problem, why now after all these years, he suddenly would be problems, no recent changes to the system, etc..

  I used the tools of diagnosis from Dell, which has tested the performance of the video card, memory, etc, and no errors were detected, which is encouraging.

  I post here, to seek advice, in which case the video card end up being the problem and need to be replaced.

  1. If I decide to replace it, what are some good recommendations for a new map of video for this system (Core 2 Quad Q6600 2.40 GHz, 6 GB of RAM).  I don't want exaggerated and pay for potential performance of video card I would not be obtained with the old motherboard, CPU, RAM, etc.

  2. the current system is sufficient for most cases, with the main shortcoming being the slow performance when you are working on my of Canon DSLR Raw files in Adobe Camera Raw and Photoshop, watch a HD video from camcorders or other sources, etc.  In this regard, replace the video card would provide a substantial improvement in this type of performance?

  3. I'd rather than replace the entire office by something more recent?

  All thought, popular point of view.

  Don

  Video card drivers can become corrupt and simply uninstall them and their update with a new driver may solve the problem.  It is more likely a hardware problem, a driver problem, even if the 9800 GT is an old map.  If he wasn't pushed hard with the game over the years, then it can last a long time. XPS 630i is a good system and with the Q6600 it is still worthy and can perform very well.  If you were to replace the video card, I'd just get something simple like the GTX 650 HERE, which would exceed the performance of the 9800 GT and not market much.

• I'm recently back from Berlin where I accidentally left my iPhone 6. My friend tried to send it to me; However, he was returned by customs. Need advice on getting my iPhone 6 sent from Berlin to California.

  I'm recently back from Berlin where I accidentally left my iPhone 6. My friend tried to send it to me; However, he was returned by customs. Need advice on getting my iPhone of Berlin has been sent to California.

  You'll have to talk to the German customs and find out what their requirements are to send an iPhone.

• Need advice on this Toshiba laptop to get

  Hello

  Just joined and hope im this ad in the right place. I need advice on this Toshiba laptop to get. It will be used for photo editing. Must have a 15/16 screen. Big screen would be nice. Programs that I run are Adobe and Photoshop light room. I use a wacom tablet with 2 external hard drives. It will be used manly at home and in the studio.

  Thank you very much

  Hi Tacker

  In general I think that the best option for you is to buy notebook series Satellite A. Something like Satellite A665. It's very nice for laptop with good material and enough performance that you can use for your work.

  I prefer laptops with bigger screen so for years I use Satellite P laptops with screens of 17 or 18. Right now I use the Satellite P500. It's the big machine. For me the best Toshiba laptop, I had over the past 10 years.

  When you have a little time to visit Toshiba page for your country and check which models Satellite are available in your country. Choose the one with the better graphics chip, enough Ram and, of course the HARD drive with enough capacity.

  Please be so kind and post comments. It will be nice to read what you think of this.

• Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

  Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

  You can buy a worn integers for that.

  Only if your machine is Virgin and you want only one specific

• Need advice on replacing hard drive Toshiba

  I have other manufacturers with a 60 GB MK6021GAS HDD Toshiba laptop. According to me, the hard disk is endangered and I want to shoot anything on the restore disc to another new. I need everything from the disk because the OS image is one that has been charged by the company, with that I have a contract and apparently the standard that came with the laptop is not compatible with their applications that I have also loaded on the laptop.

  I don't want to travel more than 100 miles in business COMPUTING of offices to have another OS loaded on the new drive I did not, so what I guess I want to do is to create an accurate picture of the existing drive, then restore the image to the new drive when I get it.

  I tried to make an image of the disc using Paragon exact Image 7 SE, but download from the failed hard drive on a dump of DVD disc fails consistently, after copying 1.6 Go Go 8,32, the statement that the hard drive is damaged.

  Another piece of software, Active SMART also reports that of the disk failure is imminent, reporting a status of 'Bad' for this disc. I have run chkdsk many times over the past months on the hard drive and on a few occasions, he isolated the defective sectors. So, everything indicates that the days of the disk being really numbered.

  I want to be able to do is buy another unit of MK6021GAS HDD and get all the files from that defective to the new without having to reload the operating system, data software application etc.

  Is this possible? If Yes, what is the best way? How can I get all of the disc if this software Paragon doesn't let me extract everything? Any advice greatly appreciated.

  Thank you
  Phil.

  Hi Phil,

  Your problem seems to be that certain parts of your drive hard existing cannot be read and thus your attempts to copy the data on the drive will fail. You will need to use a suitable backup utility must take into account segments on your drive so that you can get a copy of safety as much as possible your system.

  I know that Norton Ghost has the option to ignore bad sectors when you take a backup (I myself have used in the past). You could then do a restore of the magnified image to a new disk, but if ignored bad sectors were in a critical area of the operating system, then you still have problems after restoring.

  Alternatively, you can copy both of your personal folders as possible to an external support and then reinstall your OS from scratch even if obviously would need you a valid drive of installation/recovery of Microsoft (or OEM). You can then restore your personal files.

• Satellite M40x-112 - need advice on upgrade HARD disk

  Hello

  I have a Satellite M40x-112, it is almost 3 years and the hard drive (TOSHIBA MK8025GAS ATA) has problems, I need to change it, but I don't know a lot of this so I ask for help and advice on which hard drive should I buy for this laptop.

  I searched and read, but I still don't understand... In my view, there are many interfaces like PATA, SATA, ATA, then I saw ATA-2, 3, 4, 5, 6, 7, 8 also Ultra-ATA/100, EIDE, IDE etc etc... so I'm really confused...

  What interface using my laptop? What interface to use the new hard disk?

  And what hard drive 2.5 "is good? You will find a large number of companies, which is the best hard drives for laptops?
  My current hard drive is fat 80 GB. I would switch to 160 or 250, this guy do you recommend?

  Thank you all very much for your help,

  I understand that very well the different titles of interface HARD drive confused most people me too in the past ;)

  Then I would try to clarify some things;
  There are two important differences between the interfaces of HDD; IDE (ATA, PATA and also known as EIDE) and SATA (SATA).

  ATA - 5, Ultra ATA/66 means Ultra DMA 3, 4 (44.4, 66.7) means UDMA/66
  ATA - 6 means that ultra ATA/100 that means UDMA 5 (100) means UDMA/100
  ATA - 7, Ultra-ATA/133 means that UDMA 6 (133) means UDMA/133

  and so now ;)

  Your laptop supports the drive HARD IDE (ATA-6) Enhanced interface and you must use the IDE HDD (NOT of SATA)

  I'm not sure on the size HARD disk max because Toshiba doesn't provide official information on the max supported drives hard but a 100 GB maybe 120 GB of HARD drive might be possible.

  Best regards

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

• No sound in windows media player (11.0.6002.18111) only trying to play mp3 files. No way of fixing/uninstallation or reinstallation. Need advice!

  I recently encountered a problem with Windows Media Player 11 (a specific version in the title of the topic) where no sound play atall when you try to play mp3 files. When trying to play a track of the progress indicator moves VERY slowly and jumps in a stuttering mode and no sound whatsoever is coming through the speakers. He is a recent problem.

  All audio files work on other audio programs like Real player, quick time e.t.c. and the sound comes from the computer normally. Only the sound that I have are with windows media player when you try to play mp3 files. Still fine read video files, wav files play fine. How boring is that he suddenly decided he likes are more mp3 files!

  More annoying, I stumbled upon the fact that I can't uninstall the reader as in Vista, it is part of the operating system literal, I can't download and install WMP install package from Microsoft because I tried and it tells me that I have a more recent version of Windows media player and therefore impossible to use the downloaded Setup program to install or repair windows media player. It is therefore impossible for me to get an installation package that is newer than the one on the computer, you would have thought that the downloadable installation on the microsoft Web site would be the more recent but no!

  I can't think of a way to solve this problem. For me it feels strongly a Codec issue to do with MP3 and WMP but I don't really know about Codecs enough to go on the setting of the specific Codec with the question, or even track down which codec it is perhaps whether she "is" a codec problem in the first place.

  I tried settings with the menu of options in WMP 11 troubleshooting unsuccessful (obviously), I also tried an audio tool / repair of breakdowns than microsfts audio troubleshooting prompted me to try, that of no problems with the actual audio devices on the system... I KNOW, his problem with WMP and mp3 files!

  So, to summarize, WMP doesn't read MP3 files, I can't run a repair tool that there is no 'installation' to WMP 11 package, it is not an uninstall utility is which means that I can't uninstall it to reinstall a new, I can't download the installation package and run it as apparently I have a more current version than is available on the microsoft Web site. Then what should I do?

  I need some advice on how to go about trying to solve this problem I've hit a bit of a brick wall...

  Any advice would be much appreciated!

  FIXED!

  randomly enough rate and bit depth format sample somehow has set high in the sound control panel, advanced driver.

  After hitting "restore defaults" it resets the depth of rate and little sample return at: 16 bit 44.1 khz

  The sound now plays perfectly.

  Weird it performs only mp3 files!

  Thanks for the help people, it seems that I ended up sorting out on my own though! Yay for me! haha

• Inspiron s 660: hard disk failure. Need advice please.

  Long story short my sister gave me a s Inspiron 660 she received as a gift a few years back (legitimate).  She said that was no longer working and I could.  I suspected a faulty hard drive and after several diagnostic tests later confirmed the WD Blue crashed the original; complete failure. Now, here's where I need advice:

  1. when it has received, it came not with a physical disk from the Windows 8.0 operating system.  It was pre-installed and then upgraded through its work of departmental to 8.1 it.

  2. I can't access the code of Windows because it is in the BIOS.

  3. I have a hard drive to work with Windows 7 installed and tried hooking laptop to see if he should realize that he was a long shot at best.  As you have probably concluded he was not recognized.

  4. I thought wiping one of my hard drives and do a clean install of Windows 10.

  Question: With a new hard drive (or possibly an SSD) would work #4 or I still have problems with the BIOS and Windows embedded product code?

  Question: What do you suggest I should try?  It's a nice little system and everything is clean and stable.  I have someone who needs a system, but can't afford it, and I thought I'd give something that would meet its needs.

  Thank you.

  ROUTE29

  Re: 4. I thought wiping one of my hard drives and do a clean install of Windows 10.

  Yes, it should work, but to do this, you must either buy an OEM copy of W-10, which has its own product key.

  http://www.BestBuy.com/site/Microsoft-Windows-10-home-64-bit-Windows/4423102.p?skuId=4423102

  https://softwarekeep.com/Microsoft-Windows-10-Home-Edition-32-bit.html?gclid=CNXh5ev3wc8CFQGSaQod5A4LMQ

  The upgraded version free of W-10, Windows 8, 8.1, 7 ended July 26.

  Bev.

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.