Need Clarification - Http connection/GPRS

Similar Questions

• Clarification: Default Http connection suffix is MDS/BES?

  Hi all:

  I had reviewed most if not all doc and discussions on the definition of the networks for the http connection. (Thanks Peter Strange)

  I need clarification on the behavior if no suffix is provided (example: Connector.open ("www.blackberry.com"))

  This is supposed to Connector.open ("www.blackberry.com;deviceside=false") - a BES/MDS connection as default

  On my Storm V4.7.0.75 no suffix works but "; deviceside = false' does not work.

  Since my Storm is not part of the company's network should work...

  Am I missing something?

  OLAF

  Verizon is an exception, they have a direct TCP stack available on the device.

• HTTP connection limit

  Hello guys '

  My application creates the HTTP connection. I want to increase the speed of downloading content to the web server. Content consistes of many unit data. In other words, I need to download 100 unit datas. Now, I use the connection of one for downloading this content (100 unit datas). Its download speed is too slow. I want to be fast.

  So, I think that a lot of connections can increase the speed of downloading data.

  How many connections for a single application to MAX?

  You have another way to increase download speed?

  Please share knowledge with me guys.

  TNX'

  I recently did some tests for a real-time application here performance.  Essentially on a GSM GPRS (all we have in the United Kingdom) network without EDGE, I could get about 1 K per second.  So with a single connection you should get your lot down in less than 20 seconds.

  As I said, I don't think that multiple connections will help you because:

  (a) I believe that there is only a single underlying communication method and therefore any package that you use for a connection, it is stealing this package to another connection

  (b) I suspect that there is a significant amount of overhead, establishing the connection and latency that involves.

  Please let us know how it goes...

• HTTP connectivity from a device problem

  Hello

  I'm working on an application that works with our web server via HTTP and HTTPS.

  As it is a consumer application, we want to operate without MDS, out-of-the-box when a smartphone is purchased at retail with a web access data plan.

  I assumed that this means using direct TCP when a Wi - Fi connection is not available.

  The following code snippet prepares the URL according to the configuration, and opens the connection:

  String fullUrl = (isSecure? ("https://": "http://") + appConfig.getServerHost () + "/" + url + (bbAppState.isWiFiOnly ()? « ; (interface = wifi': "") + (bbAppState.isDeviceSide ()? « ; (deviceside = true': ' ");

  c = (HttpConnection) Connector.open (fullUrl, Connector.READ_WRITE, true);

  Details of equipment and network:

  Feature: 8320
  OS 4.5.0.81
  T-Mobile US network
  Have a data plan (unlimited web and 400 messages)
  Connection preference: Wi - Fi preferred
  No apn is not specified
  Browser and third-party applications downloaded from the App World can access internet via Wi - Fi and EDGE/GPRS with the above parameters
  

  Tried:

  1. Free Wi - Fi and EDGE: deviceside = true - get "Tunnel failed '.
  2. Free Wi - Fi and EDGE: no deviceside, only the url - get "Tunnel failed '.
  3. No deviceside, only = wifi interface - works with a Wi-Fi connection, reports "The Tunnel failed" when out of range of a Wi - Fi connection.
  4. I tried parameter APN to internet2.voicestream.com just to test - got the same error 'Tunnel failed '.  I would not use it as the browser and other applications need and work when the APN is empty.

  My question is if I'm something wrong or missing something.  My hypothesis is that third-party apps and BlackBerry Internet Service browser.  Is there a way to know?  Is there a way to disable it (for example to make sure that the browser and other applications use it)? Our company has recently become a partner of Alliance of BlackBerry, so we can apply to BlackBerry Internet Service, but I do not understand if this is necessary for consumer applications, or if the consumer applications should rely on direct TCP.

  Any help will be greatly appreciated.

  Thank you

  Sergey

  Use '; deviceside = true ', you must also specify the details of the AFN, the options of the device or in the string you provide with "; deviceside = true '.  If you do not, you will get "Tunnel failed '.

  I would like to confirm the settings for T-Mobile APN - the value that you used does not match what I found in a google search.

  Browser and other applications will use WAP 2.0 or BIS - B, requiring no configuration.  You can use WAP 2.0 - standard article for more details:

  What - in different ways to establish an HTTP connection or socket
  DB-00396
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  Recommendation - use BIS-B (service Alliance Partner) If you can, work in cases more than anything else.

• Envy 13 - d005tu: I need an ethernet connection for my new HP envy 13 d005tu - y at - it an adaptor I can get?

  I need an ethernet connection for new HP Envy 13 d005tu - y at - it an adaptor I can get

  Hello

  Last week, I bought 2 of those on Amazon:

  https://www.Anker.com/products/A7514041

  And they work perfectly. Windows 10 will find the right driver for it or you can download from Anker.

  Kind regards.

• What I need to be connected to my computer when windows backup is running?

  When you perform a backup of windows:

  You have to be logged into your account?

  Should the computer be on? I guess for this.

  When to perform a backup of multiple users, do they need to be connected as well?

  http://www.YouTube.com/watch?v=HZrX4Vb4ui4 Watch this video on how to use the windows XP backup.

  You must be logged in, and if you follow the instructions in the wizard, you will come to a point where you can choose to save everyone and they do not have to be connected.

  I hope this helps.

• "Do you want to view only the webpage content that was delivered safely. "the Web page content that willl be sent using a secure HTTPS connection, which could jeopardize the securityof the entire Web page.

  Original title: SECURITY WARNING

  When I try to open a program I have getthis message:

  "Do you want to view only the webpage content that was delivered safely.

  "the Web page content that willl be sent using a secure HTTPS connection, which could jeopardize the securityof the entire Web page.

  Is this something that needs to be corrected?  If yes how.

  Hi billkabay,

  (1) program which you are referring?

  (2) is the problem confined to this specific programme?

  (3) since when are you facing this problem?

  This problem normally occurs when you open Web pages in internet explore. Please specify if this happens when you open a program or opening a Web page or link in internet explore.

  You can see the steps in the link below

  https://community.dynamics.com/product/crm/crmtechnical/b/crminogic/archive/2009/07/09/how-to-disable-the-34-do-you-want-to-view-only-the-webpages-content-that-was-delivered-securely-63-popup-for-custom-pages-added-to-crm.aspx

  Also see the steps by Vincenzo Di Russo (check the post Saturday, May 30, 2009 11:36) in the link below.

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/e7526a5f-F953-4235-90c3-004f9b973585

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• cannot reduce the application on end key click on the http connection.

  Hi all

  I use version eclipse3.4 for Blackberry development. In my application, I need to extract data from a Web service via a servlet created by me. I've implemented it using a wire and it works fine.

  But the problem is, after the http connection, when control passes to servlet I can't minimize my application using events end key as a normal application. This fine event key only works when the control back on the side of the unit... My entire application got stuck when he tries to retrieve the data from webservice... Please help me on this.

  Please guide me how to implement the reduction feature in my application when it attempts to retrieve data from the server using the http connection.

  I used this package for connecting

   

  javax.microedition.io.Connector; javax.microedition.io.HttpConnection;

  Please help me on this...

  Advanced thanks and greetings,

  Michel Philippe.

  You will need to run the web service code in a separate thread...

• http connection goes through the WAP gateway and not through BIS/BES

  How can I check that an http application connection passes by the WAP gateway and no BIS/BES.

  I do not have the source code of the application and need to build my own app to connect http connection made by the unit.

  I only have the jad file.

  Thank you very much for the help.

  at this point the man, you must understand a few things on your own.  Get the cod, and put the cod in the same folder as the Simulator, they will then work in the sim card.  Or you can browse to a deployment for application with the sim ota and download the cod in this way.

• HTTP connection in newspapers/scheme of B2B information?

  Hello
  
  I have a TP, say X, which sends the messages to my host, Y. Suppose that an error occurs during the connection HTTP/HTTPS, these connection errors will be photographed to my host Y in the newspapers of b2b or patterns?
  
  My understanding is that Oracle B2B is not involved when the HTTP/HTTPS connection is set up between X and Y. It was only after the connection has been set up, will be transferred control to OC4J and from there to the B2B engine. Thus, any incoming HTTP connection error see not in B2B host newspapers/patterns.
  
  Please can you confirm if my understanding is right or wrong? If I need to monitor this connection error, which connects to will, I need to check?
  
  Thanks in advance,
  
  Best regards,
  Suhas.

  It is my understanding as well. The SSL handshake is actually going to the layer where SSL was configured/licence, if it is enabled on OSH layer, you may need to consult OSH associated newspapers to understand what is happening.

  Kind regards
  Sinkar
  [Correction to Ramesh Team]

• Items that are unencrypted in a https connection may be hidden?

  For a long time, IE was an option to hide items unencrypted in a https connection. I can't find such an option now, so I can't give more details. BU is the point: Firefox can do? Some sites have encrypted partially connections and for me it is important to distuinguish what is safe and what is not in these sites. A sad example is very support page for the product Mozilla (see below).

  Thanks in advance.

  You can still file an enhancement request in Bugzilla (or) - http://bugzilla.mozilla.org
  Try it, I really encourage you to follow this path.

• Do I need an internet connection to play music from Apple?

  Hello, I will be visiting by air soon, I need an internet connection to enjoy the music, that I loaded into my Apple iPhone music Playlist? Thank you.

  Start here:

  Add music catalog to Apple's music to your library on your iPhone, iPad, iPod touch, Mac, or PC - Apple Support

• I need help to connect my iPhone apps on El Captian Office

  I need help to connect my iPhone apps on El Captian Office

  Without knowing exactly what you're trying to do, this article from Apple can help:

  Continuity allows you to connect your iPhone, iPad, iPod touch and Mac - Apple Support

• HP MINI 1000: HP MINI SYSTEM STOP FATAL ERROR. CNU9302RM6. Need password to connect!

  HP MINI SYSTEM STOP FATAL ERROR. CNU9302RM6. Need password to connect!

  Please someone SOLVE THIS PROBLEM. I HAV NOT OPEN MY PC one YEAR, please help me if you can?

  Good day!

  Boss!

  I have the password for you

  Please enter = e9lof17b4g

  Kind regards

  KNRK

  I work for HP

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor