What I need to be connected to my computer when windows backup is running?

Similar Questions

• How do you get a distance help.i need someone to connect to my computer and look to see what is happening

  is it possible to get bsomeone to connect to my computer and watch to see what past?

  is it possible to get bsomeone to connect to my computer and watch to see what past?

  Yes, there are several ways to do it, and you can even find someone here who is willing to do. But I highly recommend that you do * not * let someone do it, unless it is someone you know and who you trust completely. To not accuse someone here what, but if you let a stranger into your computer, you run the extreme risk of impersonation, be infected with malicious software, etc.

• ISCSI connected storage / access it from windows / backup

  Hello

  I have successfully created a cluster of ESX Server images computer virtual running of a LUN iSCSI on the network plan. However to support this until I need to be able to access these images from a windows machine.

  I installed the windows on windows iSCSI initiator and connected successfully. However, windows cannot read the formatted file as its VMFS3 system.

  IM only using standard backup for the moment software and intended to stop the VM machines one night to do it. However with no windows is unable to read the file system I can't.

  Read VMFS I need special backup software running or have I missed something?

  Thanks for the help

  Hello

  You will need to have VCB (VMware consolidated backup) installed on the Windows computer, this will help you in the backup.

  Thank you

  Samir

  PS: If you consider this answer useful please consider rewarding points

• "Error please make sure printer is connected to the computer" when installing HP Photosmart 5515.

  Original title: my HP Photosmart 5515 will be OK: print/copy/scan to memory card. BUT...

  Running Windows 7, new printer installation, I tried HP site and Instruction Book, uninstalled and Reinstalled.

  Same problem each print/copy/scan time.will memory card OK. BUT does not connect to my laptop to scan to the computer wireless or wired, it rises "year error occurred while scanning, please make sure that printer is connected to the computer.

  Hello

  Method 1:

  I suggest you run the automated FIXIT from the link below and.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I also suggest you to go through the steps mentioned in the link mentioned below and check.

  Scanning problems? Try the HP scan Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114802&cc=us&DLC=en&LC=en&product=5063608&tmp_track_link=ot_search#N97

  HP Photo smart 5510 and 6510 e - all-in - One Printer Series - a 'connection error' or "Computer no. detected" Error Message appears when trying to Scan from the printer control panel

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02917811&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=5159859&prodTypeId=18972

  See also:

  How can I get my PC to see my Photosmart printer of 5515 via my wireless network

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-do-I-get-my-PC-to-see-my-Photosmart-5515-printer-via-my/TD-p/1171265

• Oracle Database XE - apex on Windows 7 - the problem with the connection from another computer on Windows 7

  Hello

  I started with Oracle Database 11g, with apex XE, fact the upgrade of the Apex 4.2.6 and to develop a small Application.

  I wanted to connect to my computer (with step of database on this subject) from another computer Windows 7 B.

  So I put Firefox: //A:8080/apex but I have only received a timeout.

  Of course, on both computers there is a firewall of windows running, so I stopped on both systems, the firewall, but it is always the same.

  In Explorer windows running on computer B, I can see data from computer A and both computers are in the same home-net group. (Sorry for my bad English).

  Is there anyone who cann tell me how to get the connection running?

  Maybe I saw the info on this in the textbooks, if it is there, please give me a hint.

  Thank you very much

  William Kastner Salzburg

  Hello

  Check to see if that helps

  https://docs.Oracle.com/CD/E17781_01/install.112/e18803/TOC.htm#XEINW127

  Kind regards

  Jari

• When I try to log on my "HP Pravillion 553w" userinit.exe Application error comes up and asks me to click ok to terminalte request. What can I do to connect to my computer?

  "When I try to connect my computere"HP Pravllion 553w"userinit.exe Application error comes on and says" application failed to initialize, click on ok to terminate the program. I just want to open a session. I don't know what made it? can someone help me please.   Georgia

  Hi, Georgia,

  This could be a limitation of the fast user switching feature.

  The fast user switching feature may not work if there is insufficient computer resources to create a new Winlogon service thread. When there is insufficient resources, the system may stop responding (hang), the system may lock up computer or the user may receive a Userinit.exe error application and the following error message:

  The application failed to initialize properly (0xc000012d)

  Method 1: In these cases, some users must log on to the computer, or you must close some programs to free up the resources of the computer.

  For more information, see:

  A discussion on the availability of the fast user switching feature

  This problem may also occur due to registry settings incorrect shell.

  Method 2: Try the steps listed here.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  To resolve this issue, follow these steps:

  a. press CTRL + ALT + DELETE and then click Task Manager.

  b. on the file menu, click new task (run...).

  c. type regedit and then click OK.

  d. in the left pane, look for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  e. in the right pane, double-click Shell.

  f. in the value data box, type Explorer.exe, and then click OK.

  g. in the right pane, double-click Userinit.

  h. in the data value box, type %windir%\system32\userinit.exe and then click OK.

  Note The %windir%\System32 placeholder represents the path of the Windows folder. By default, C:\WINDOWS is the path of the Windows folder.
  If you type an incorrect value in the value data box, you cannot connect to the Windows XP-based computer.

  i. exit the registry editor.

  j. restart the computer.

  Check if this can help you.

• WE HAVE AN EXPANION UNIT. WE CANNOT TURN FIREFOX ON IT AND HOST OF THE COMPUTER AT THE SAME TIME. I CHECKED THE BOX THAT ALLOWS HIM TO RUN AS DIFFERENT USERS, BUT STILL DOES NOT WORK ON BOTH. DO WE NEED TO BE CONNECTED TO EACH COMPUTER WITH A DIFFERENT NA

  We use Windows XP and have not had a problem with Internet Explorer.

  I suggest you try as different users.

  If my answer has solved your problem, please click 'Solved It' next to this response when logged in on the forum.

• I forgot the password need help to connect to the computer

  How can I reset my admin password I forgot, that he cannot log on top of office 7 computer window prem

  Here are all the options available to reset a Windows password forgotten.

• Sony MW600's should be connected to my computer laptop windows 7 but does not work as it should

  I got a bluetooth headset MW600 from Sony that is working well for my mobile. Got a Dell Studio 1558 laptop

  with windows 7 (64 bit) OS installed.
  I was able to connect the unit to my laptop after some teething problems, but once connected, when I try to play music
  (WMA or VLC or REAL etc.), he plays on the laptop speaker. Funny thing here is that it works as a remote control, (able to play
  and pause, etc. to the front using the bluetooth headset). but is not playing music in trendy on headphones.
  Need to mention when he connected first of all, I got a message like "not found driver" for the bluetooth for windows device.
  Then I tried to update the Microsoft Bluetooth Enumerator and got the message as "Best driver already installed" which is
  funny to me, since it is a driver of 2006.
  I 'google' suggestions and found a driver 315 MB from a source as 'Marked' as 'Fixed' in another Forum
  but I don't want to go unless I have no other options.
  then you can suggest me good info that would help me.
  PS: Please don't suggest not all Web sites of information for me, since I worked for the technical support for 3 years as well
  I know, how information 'google' or 'bing', but just let me know if there is another way to solve this problem.

  I got a bluetooth headset MW600 from Sony that is working well for my mobile. Got a Dell Studio 1558 laptop

  with windows 7 (64 bit) OS installed.

  
  I was able to connect the unit to my laptop after some teething problems, but once connected, when I try to play music

  (WMA or VLC or REAL etc.), he plays on the laptop speaker. Funny thing here is that it works as a remote control, (able to play

  and pause, etc. to the front using the bluetooth headset). but is not playing music in trendy on headphones.

  Need to mention when he connected first of all, I got a message like "not found driver" for the bluetooth for windows device.

  Then I tried to update the Microsoft Bluetooth Enumerator and got the message as "Best driver already installed" which is

  funny to me, since it is a driver of 2006.

  I 'google' suggestions and found a driver 315 MB from a source as 'Marked' as 'Fixed' in another Forum

  but I don't want to go unless I have no other options.

  then you can suggest me good info that would help me.

  PS: Please don't suggest not all Web sites of information for me, since I worked for the technical support for 3 years as well

  I know, how information 'google' or 'bing', but just let me know if there is another way to solve this problem.

  Two things:

  (1) make sure you have the best/full software driver for your Dell internal bluetooth device.

  2) go into the sound control panel and change the playback to bluetooth headset device.

• ThinApped application requiring a mounted network drive and get "Unable to connect to the sharedDbLibrary" when the application is running on W7 and the drive is mounted

  We have an application that needs to have a specific network drive, mounted with a the letter I:\. This support allows the application to access some of the files that must be available for the application to run.

  If the I: drive is not mounted then the application will not work and you get the following message if displays the runtime "Impossible to connect to the sharedDbLibrary.".

  We have the application on an XPSP3 box thinapped and everything works fine as long as the drive is mounted.

  The ultimate goal is to have the application thinapp running on a workstation of W7.

  We have mounted drive I:\ on a post of W7 and ran the thinapp app by making the same error message that allows us to obtain under XP as drive I:\ was not mounted "impossible to connect to the sharedDbLibrary".

  We checked that the drive I:\ is accessible and we also validated that the path is good. We were able to reproduce the problem in a Windows 2008 box, as well on the other hand the thinapp works fine on a Windows 2003 operating system.

  So basically with the drive I:\ mounted on XP and Windows 2003 the app big short thinapp. With the same drive I:\ mounted on W7 and W2008 application does not run and we get the same message that allows us to get on WXP and W2k3 when drive I:\ was not mounted and the app couldn't find the mapped drive.

  Anyone know how to start to solve this problem?

  Have you had a look at this blog post? http://blogs.VMware.com/ThinApp/2011/04/making-Windows-XP-only-apps-run-on-Windows-7.html

  It might help you to add necessary dll and get the app runs on Win7.

• HP Photosmart more B210: printer HP B210 connected to the computer with windows vista is not print documents

  Have had the above printer and computer wireless without any significant problems of printing until yesterday when I couldn't print liked anything from my computer. I disconnected the son / the power of my printer and router, waiting a few minutes and then reconnected the accounts.  Then I restarted my computer and retries impression with unsuccessful results. I then run the wireless network Test and the report does not show any problem.  Anyone have any suggestions to solve this problem.

  Thank you

  Hi @kattok001

  I see that you have had the minimum printing problem in the past, but suddenly you cannot print at all despite your efforts. I'd be happy to help you with this!

  Let's start our trip with HP print and Scan doctor. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• What would cause third-party software not to install if Windows Installer is running and up to date, and the PRC is launched?

  Still trying to install a printer from Eastman Kodak to a computer that was just recovered. I have new versions of Windows Insataller and the third-party software for the printer. However, even when I put the installer on "automatic" and "start" the service, it won't stay like this. I run regedit, msiexec.exe / unregister and msiexec.exe/regserver. Nothing happened. I checked the system had full access to HKEY_CLASSES_ROOT. no problem. I ran chkdsk. Hard drive looks very good.

  I need a response that I'm getting a little irritated that something as simple as install a printer should take this amunt of work. Oh, BTW, running Windows XP Home Edition, 2004 computer version. I don't know if this helps or not. The only thing I'm NOT willing to do is another system of recovery. That's how I got here in the first place. So, if anyone out there has suggestions, ideas (no matter how strange), ar solves this problem, I would greatly appreciate a response.
  Thank you
  songtothesirens

  Hello

  Re-install Windows Installer and see if it helps.

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003

  Note: Run method 2 from the above link.

  Hope this information helps.

• I have windows 7 installed where I also have Internet coneection. I want to connect to another computer (with Windows xp) office in my local network connection.

  I want to stay connected to all the other pc in my local network. which are connected by rj-45 cable. When I ping any machine to xp windows from your windows pc 7 I am able to do but I'm not be able to windwos xp machine and also none of my windows xp machine shows up in my network. When I click on the network card, it shows unidentified connection.

  Hello
   
  See the article mentioned below:
  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows
   
  You can also check the items listed below:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  How to troubleshoot a network home in Windows XP:
  http://support.Microsoft.com/kb/308007 

• My Windows Vista computer does not see the network or printers that are connected to a computer using Windows XP

  before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.

  I have checked the firewall and they took two computers, but still no luck.

  Hello

  Did you change your computer?

  This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.

  Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.

  Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.

  I suggest you to install the update on windows XP.

  http://www.Microsoft.com/download/en/details.aspx?amp;amp;amp;displaylang=en&ID=5577

  This reference so

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• Remote Desktop connection: Windows 7 Home Premium 64-bit connects to the computer of Windows XP VPN

  Hi all

  I am trying to establish remote desktop TO my new laptop (Windows 7 Home Premium 64-bit) on my computer (Windows XP) work via a VPN. The VPN Client connects to my network to work with no problems, but when I try to use the remote desktop connection I get an error message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are working well, so I guess that the problem is caused by another issue?
  I'd appreciate any help.
  Thank you
  Lou

  Thanks for your response Al. To answer your qus:

  (1) cisco VPN Client for 64 - bit.

  (2) I don't know how to ping through the VPN tunnel - I don't see this option, anywhere in the Cisco customer (I'm not a professional, just a user)

  (3) Yes. Also, I can connect to the host PC via my old laptop XP (xp) of fine House, just not my new laptop (Windows 7 Home Premium) so the problem must be with my new laptop rather than at the end of the host PC.

  After that you connect through the VPN tunnel open a command window, IE. go in Start > run , then type cmdand type ping DRC-hostname or IP-address-DRC ping.

  Examples:

  Ping lou - pc

  ping 192.168.1.25

  FWIW, I have a desktop computer home wireless Windows 7 Home Premium SP1 64 bit on my LAN that connects fine to a XP Pro SP3 32-bit Wired test machine using [DRC] remote desktop. Now XP Pro SP3 DRC test machine is configured for a static IP address and I have manually configured the network mask, gateway, DNS resolves and made sure that NetBIOS over TCP/IP is enabled in the properties of the NETWORK Ethernet card on the test computer.

  Just for fun, I checked the hashes of file for the file mstsc.exe on the Win 7 Home Premium 64-bit machine and a machine Win 7 Home Premium 32 bit I have and hashes were a bit different as the size of the files. The versions of the files are the same though. I assume that the difference is because we're 64-bit to 32...