Need for clarification about Webcenter and Jdeveloper Total confused.

Similar Questions

• Need training on the BPEL and JDeveloper.

  Hi gurus,
  
  Hello
  
  How are you.
  
  I'm new to BPEL and I need training on the BPEL and JDeveloper to accomplish my task.
  
  My requirement of the task should copy the files from one location to another location. I've been through some documents, these documents say to use FTP adapters (GET and PUT).
  
  According to these documents, I implemented my task using FTP adapters and deploy the program. It is deployed successfully theprocess.
  
  And in log file these messages also showing:-
  
  Form of deployment task: There is no form to deploy
  Deploy the decision services:- There is no service of the decision to deploy.
  
  Can you please provide me with the details on the training.

  Hello

  Follow the quick start to the 'http://download.oracle.com/docs/cd/E11036_01/integrate.1013/b28983/toc.htm '.
  And tutorial order booking at 'http://download.oracle.com/docs/cd/E11036_01/integrate.1013/b28987/toc.htm '.

  I hope that you will feel more confident after that and then can think abt formations.

  Thank you

• Need for clarification in regards if you upgrade memory and HDD invalidates the warranty/support Dell

  Hello!

  I bought a Dell Inspiron 15 at the end of January. I told the sales guy cat exactly what I needed for and what my budget was. Well, based on his advice, I ended up raising my budget so I could have the best possible computer for my use.

  Now, normally, I don't buy a computer on mine, but the person I usually consult wasn't available, so I thought, Hey, the Dell guy cat must know what he's talking about.

  The computer he sold me a * disk drive (5200 rpm, I think). I told him that I wanted it for the recording software. After I bought it (buyer's remorse), several people told me that he should have sold me an SSD.

  Okay - Here's my thing: I can go buy a SSD and install it. But cancel my expensive service plan and a guarantee that I have? In addition, tech support plan? And regardless if it's a Dell hardrive and I can someone have set up here, or that I have to send the laptop back and have Dell to install one of their SSD to preserve the warranty and service plan?

  Thank you.

  With Dell, you are allowed to replace serviceable by the user on your computer without to as voiding the warranty.  Examples being the hard drives, memory, graphics cards, etc.  If ever you have a problem and need to send the unit for repair, you will need to replace your Dell parts provided those and Dell will only be guaranteed components provided by them.

  Also, you are more then welcome to install yourself, however if damage you something during the installation it will invalidate your guarantee that you caused the damage.

  Yes TLDR you can install anything you want.

• Post a message (need for clarification)

  Hi all
  This is going to be a long post, because I want to give good background.

  I wrote a message on the cancellation of the automatic updates. Here, it is pasted:

  "I have an old HP Pavilion dv7-4180us Notebook PC using Windows 7 Home Premium. It seems that I can never stop automatic updates. There is a problem.
  On the one hand, we are informed to install updates to keep our machines running well, up-to-date, to increase security. But I found that when these control sooner or later my computer, that my device is malfunctioning and I have to run the system restore.

  QUESTION: how to cancel - once for all - automatic updates all the?
  QUESTION2: How do you know which programs are bad operating system and are necessary?

  The damage has been done is usually a bad slowdown in operations. Start-up takes longer, opening files is slower, and I got an impossibility to open my system thanks to the fingerprint recognition.
  About me:
  -00359 - 899 2687 OEM product ID - processor: Intel (R) Core (TM); 5 UC; M 460 @ 2.53 GHz
  -Memory (RAM) installed 4.00 GB - system Type: 64-bit operating system
  -Prod. No.: XG834UA #ABA
  All comments welcome. Thank you. »

  (end of my first message block)

  A response has been sent by a peer:
  He pasted my original message in the upper part of his, then added the comment below. I have stick.

  "Windows updates are updates most of the time required of course there are glitches but then you must restore to the last frame of work and try to update again." Constant updates is a good indicator of your operating system is corrupted and you need for your system back to factory recovery install and update again.
  -First follow help links.
  Do not know how to display help click on the following link.
  First time here? Learn how to post and more
  -For disk recovery only.
  Get a HP USB recovery or HP recovery disc drive
  Read this before ordering your recovery discs! (United States and Canada only)
  Don't PM me if you do not allow PM in return. »
  (end of message from One Peer, glued)

  I tried to send a response to a peer. I clicked on the button "Answer" in the bottom right of his message, but my answer is back to my original thread. The 1st link in the message is 'Learn to use the forum.' It is said (stuck),

  A brief subject title including:
  • Name of the product
  • A brief description of the problem
  • A detailed message with the following information:
  o name of the product and operating system
  o How do I find my product name and number?
  o Description of the problem, including:
  o error messages, if applicable
  o changes to your system until the problem occurred
  o do not include the serial number of the product or personal information.
  (end of dough)

  With this link, I guess that a counterpart found my original post did not argue correctly. BUT: I entered the information about the product. on my first line and below the o/s. According to info. the link, I did everything that I need.

  QUESTION: was my insufficient message following protocol?

  Approved One also said in his message, (quote is pasted): ' don't not PM me if you do not allow PM in return '.
  In my attempt at a peer response, I wrote (pasted below).

  "Your last comment, ' Don't PM me..." If you do not have... "
  Could you explain that? Do you have I have somewhere a "PM" option for answering machines cannot delete "PM" me? Not to my knowledge. Finally, please be so kind as to explain what is "PM". "(end of dough)

  QUESTION: given that my answer to the q. above might not have reached a counterpart, can someone pls. specify what is "PM"?

  Another issue is the link 'Learn to use... forum.' A link on this link goes to "" tips ask the ' very best Question. "» "I opened that and saw this picture:

  

  In the image is "CNF". It's a serial number. Confusion which is on the first link "learn... use... forum", it is said, 'Do not understand the serial number of the product, or any personal information'.
  Please clarify this discrepancy, betw the statement and the image.

  LAST QUESTION: want to post this message, I thought that it wasn't on laptops, then search "HP Expert Forum. However, under "Choose a Board" has a long list, then "Show all" and "HP Expert Forum" comes. However, by clicking on it, I can't see in the empty bar where I need to place it. What I am doing wrong?

  Please follow the long message. All responses appreciated.

  AtAF

  I can't answer all your concerns. I will try to answer some of your questions and give you some places to look for answers.

  ---------------------------------------------------------------------------------------------------------------

  P.m.s are Messages private, somewhat like a mail between posters, but always using the guidelines and the presentation of the general forum.  In general, most people have this feature enabled.   I have impossible (not) comment in particular on the use of any Expert of the service.

  More information: How to send a private Message

  ---------------------------------------------------------------------------------------------------------------

  The bit about Product Information reminded members do not provide the serial number of their computer.  People post their serial numbers, their send addresses, same numbers on occasion.  It is an invitation only and we strongly advise anyone to publish personal information on this public Web site.

  ============================================================================

  Windows updates

  Everyone has an opinion about updates.  On a Windows 7 system, the need for updates - once the system is installed and the main updates are installed, AND assuming that it does not install no matter what additional programs or software - is mainly to preserve the system of some security problems are hiding everything.

  If you want to turn off Windows updates, then do it.  You are the admin.  It is your machine that is at risk - or not - and it is your decision to make.

  You can switch automatic updates / stop in

  Control Panel > set view icon > Windows Updates > settings

  Windows updates - turn auto update or disable

  ============================================================================

  Essential programs

  As a general rule, you must the programs running on the computer when it starts up which are included in the list of programs in the system and Microsoft programs in your startup file configuration list.

  How to use MSCONFIG in Windows 7

  Note the general Word - depending on what you have installed on your computer, your boot file can be filled with, well, an interesting range of programs that can indeed have slowed down the performance of your system over time.   Yet once, however, most of the programs - unless they are poorly written, or you forced them into the startup sequence when they belong there – are not by themselves slowing down the system by law "to be in the startup list.  In other words, you might consider doing some homework before snatching the programs in this list.

  ============================================================================

  -Comment-

  Your computer contains only 4 GB of RAM and he is older; We say "vintage".  This is not to start with a lot of resources and Windows 7 can, in itself, consume a lot of what is available.  Windows 7 is greedy.

  Add a gourmet operating system, a file system (perhaps) fragmented, a couple of badly written programs (bad code), less fast blazing to the Internet, and you might have the recipe for a slow computer.  I'm not saying that your computer is under one of these weaknesses, only that many computers don't have these problems.

  -------------------------------------------------------------------------------------------------------------

  Resource monitor

  Resource hogs could be traced using the resource monitor.  Even on Windows 7, the tool is pretty sophisticated. You can spend time learning how to use it effectively.  However, the program is very effective to help you quickly catch programs that are hogging resources (memory and network, for example) that you have available.  For example, if you have a program that took all the memory and ran Amok, so to speak, the monitor will be able to quickly show what offending program to the wrongdoer.  In most cases, you can kill the culprit (identify, right-click > kill).  If you trash your system and really hang things up, press the power button and accident-shut down the computer.  You really want to do it very often. but every Admin has made at least once a clearing.

  -------------------------------------------------------------------------------------------------------------

  Maintenance

  If the system is corrupted due to lack of maintenance, then you can provide this service by giving him some of the attention, he needs without actually going and perform a complete restore.  (Shudder).    Good maintenance, especially on a vintage with a limited capacity system helps the computer make the best use of its resources.

  Good care tips can be found here:

  Improving the performance of the system without adding memory (Windows 7)

  -------------------------------------------------------------------------------------------------------------

  Fingerprint login

  After that all other maintenance was performed, it is possible that the following might help to restore the connection of fingerprints.  Understand that I have NOT used digital personal in a certain number of years and this is a quick overview of the subject.

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  If you use a laptop:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your model of laptop
  • Start the computer and connect
  • Reinstall your driver validity sensor:

  validity sensor Driver V2.1.0.2 RevA Win7 sp52354

  • Restart the computer and log in
  • (Re) Install the Digital Persona software

  sp50048 Digital Persona Fingerprint Reader Software V5.1.0.175 Rev A

  At this point, I restart the computer once more and sign in, although this software is so robust that you could get away with jumping final restart.

  Reference:

  HP Pavilion dv7-4180us Entertainment Notebook PC Drivers

  -------------------------------------------------------------------------------------------------------------

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• Compatibility Windows 7 for Empire Earth 2 and Rome Total War...

  I am looking to buy a new computer with Windows 7 home premium and I want to know if he would be able to run Empire Earth 2 or Rome Total War, they both work perfectly on my windows Xp

  Hi Yowuhdup23,

  Empire Earth 2 and Rome Total War is compatible with Windows 7.

  You can check in the Windows 7 Compatibility Center using the link below:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You can check Rome Total War is compatible with 7 by visiting the link below and you can also check for the version you are using.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=Rome%20Total%20War

  I hope this helps!

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Need for ATG 9.4 and VAC 9.4 download link

  Can someone tell me please the link for download ATG9.4 and ACC9.4 files?

  Connect to Oracle e-delivery site: https://edelivery.oracle.com and you can find it under the «ATG Web trade» product packaging

• Need for clarification on VCP 4

  I had spent my review for 3 weeks back and I still received nothing until now. Someone here can explain the process of obtaining the certification after the I take the exam? At the same time, I would like to download the official logo of vcp 4 if possible. Appreciate for any comment on this.

  Craig

  vExpert 2009

  Malaysia, VMware communities - http://www.malaysiavm.com

  Congratulations!

  You will have to wait for a letter with your certification and your secure Channel access (to download the logos).

  Usually this stage requires several weeks.

  André

• Need for clarification for cold backup and restore

  Hi all...
  
  I have a lot of confusion about the cold backup and restore section.
  
  Already I posted a scanario this topic and I would like to know a few points of clarity to understand.
  
  
  1. I had cold backup two days before
  2. I create an object * (EMP) * and inserting some records can deliver log switch continiously.
  3. manually I deleted all the physical files (data files, files of control, files, papers, redolog files)
  4. then I published STARTING FORCE MOUNT;
  5. in this case, I get error identification control file.
  6. cold two days before all of the restored files backup
  6 then I run database recovery using backup controlfile until cancel;
  7. I'm issuing select * from emp; I get error

  select * from EMP
  * ERROR at line 1:
  ORA-00942: table or view does not exist

  my QUESTION IS
  
  After that cold backup is complete, I created the table emp...
  during the restoration of old back "there is no emp table"
  
  * - Then I can retrieve table emp? -If Yes, please explain about this... *.
  
  
  Note: REF - LINK https://forums.oracle.com/forums/message.jspa?messageID=11056341#11056341
  
  -Link above says what I did? In this thread, I ask you to concept and logic...
  
  Please, consider NOT like ' * DOUBLE. "

  Not sure why you're confusing this issue? In your other thread, you applied a backup who had two days and there is no evidence that you apply to this log file to archive that had the table create in it. So if you have not restored this log file to archive who had your create table command, it will not be recovered. The most important for you to understand, it's that you have to have the newspaper the point for which you want to retrieve other archiving your recovery will not be able to move forward.

  Aman...

• Element of the page to send: need for clarification on variable bind and online help

  Hello
  
  For dynamic actions "Code from PL/SQL Execute", online help for the PL/SQL Code is as below:
  
  Specify a single anonymous PL/SQL block, which will be executed on the server to run.
  
  You can reference another page or link elements of the application from your application here by using syntax (for example: P1_MY_ITEM), but if you don't you need to include in the "Items to submit Page" attribute also.
  
  For example:
  
  Start
  
  setCommission(:P1_SAL,:P1_JOB);
  
  end;
  
  In this example, you must also include P1_SAL, P1_JOB in the "Items to submit Page" attribute.
  
  When I read this I understand that I must include in the 'Page of Items to send' attribute if I want to use bind syntax for them. In fact, I include in the "Elements of Page to submit" attribute if I can submit their values on the server and use this new value in the PL/SQL Code. If I want to use are already in session and I want to use these values, but not the new values (updated on the screen, for example), I don't have to submit to the server and I can use the bind syntax to get values that are already in session state.
  
  It was perhaps obvious, but it wasn't for me before I did a few tests with the attribute "Page of Items to submit". I don't know if I'm clear. English is not my mother tongue.
  
  Could someone confirm or not the behavior I described?
  Perhaps the online help could be updated to be more obvious if what I described above is true.
  
  Thank you

  Hello

  Your interpretation is correct. And you can use the old values in the syntax of the bind variables, provided that you have not changed the in your PL/SQL.

  Glance in this way, when a page is loaded from an HTML document is created in the browser that reflects the State of session maintained on the server. But at the time wherever the page is loaded, the two are completely separate and can be manipulated independently of eachother. JS and dynamic Actions using JS work only on the DOM HTML template while Ajax and the PL/SQL work on the Session State on the server.
  So when the page is be displayed two, HTML and session state, can be completely different depending on how you handled the.

  The DOM HTML template and Session state again get synchronized (new values recorded or scrapped) in the treatment of the consignment and the State resulting is again used to render him refresh / reloaded page.

  Kind regards

• Need for clarification: recommended Configuration of maximum rates for NIC ports

  Ran across this KB 1020808 other one http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1020808of work.

  We build on a new data center. Hosts will be:

  • ESXi 4.1 U1 (latest version)
    
  • HP DL380 G7
    
  • 2 Xeon X 5690 3.46 GHz (hex core)
    
  • 192 GB of memory
    
  • 2 - NC522SFP 10GbE (two ports Netxen)
    
  • 2-8GB Fibre Channel
    

  I had planned to use to start 1 port on each card 10GbE and interfaces 1 GB 4 - Board. The article has a few numbers of modeling that concerns me because they all say 10GbE-4 or 2-10GbE cards and x number of 1 GB. There is not a mention of 4-10 GbE cards and also 1 GB.

  1. This allusion to only used 10GbE interfaces or interfaces that ESXi can see? I have no way to hide the unused interfaces of the OS.
     
  2. If referring to only used interfaces, I'd be in a 'public' setting if later, I decided to use all 4 10 GbE ports and 4 1GbE ports?
     
  3. I see the number of CPU/memory on the list and I was wondering if I'm supposed to extrapolate from that (i.e. I have 12 hearts and 192GO so, I should be able to support more of the graph.) Didn't know what this function would be?
     

  I would appreciate any clarification, so I understand that if I have some limitations or restrictions to consider.

  Personally I would only put VM Networking on the Nexus 1000v and perhaps vMotion. It is not supposed to put something else out there because they are related to high level functions of vSphere infrastructure. The Nexus is all about discount back control of your network to the network environment go ahead guys, if you don't mind losing this kind of control, but as I said the most relevant way to implement this is to your VM networks.

  I wouldn't put on Nexus one and probably management traffic no storage either if you've always dreamed of iSCSI. FT and vMotion you can probably up there without any problem.

  In a feet network with several uplinks in an Active all Hash IP configuration will give you a much higher throughput. See:

  http://KB.VMware.com/kb/1011966

  For the physical NETWORK card support information see:

  http://www.blueshiftblog.com/?p=148

  http://frankdenneman.nl/2010/07/load-based-teaming/

  If your configuration would differ somewhat from my original post because management would use two of the uplinks of 1 GB instead of a slice of the 10 GB ports. Configure the management in an Active configuration with two vmnic and use the default policy.

  Kind regards

  Paul

• Need some clarification on decode (AND)

  The example that I am referring to comes from DECODE

  ORDER_ID CUSTOMER_ID ORDER_STATUS LOCATION RECOGNITION METHOD

  2458 101 0.00 postOffice certified Air

  2397 102 1.00 warehouse Air certified

  2454 103 1.00 warehouse Air certified

  2354 104 0.00 postOffice certified Air

  2358 105 2.00 ground postOffice certified

  2381 106 3.00 ground warehouse certified

  2440 107 3.00 ground warehouse certified

  2357 108 5.00 warehouse Air assured

  2394 109 5.00 warehouse Air assured

  2435 144 6,00 secured to the floor of the post office

  Assumes that the value of order_status is used in the form of bitmap where the first three bits contain information about the order and the other bits are always 0:

  • The first bit is used for location data:
  • 0 = Post Office. This corresponds to the values of 0, 2, 4 and 6.
  • 1 = the warehouse. This corresponds to the values of 1, 3, 5 and 7.
  • The second bit is used for the method:
  • 0 = air. This corresponds to the values of 0, 1, 4 and 5.
  • 1 = mass. This corresponds to values of 2, 3, 6 and 7.
  • The third bit is used for reception
  • 0 = certified. This corresponds to the values of 0, 1, 2 and 3.
  • 1 = insured. This corresponds to the values of 4, 5, 6 and 7.

  DECODE (BITAND (order_status, 1), 1, 'Warehouse', 'Post office').  DECODE (BITAND (order_status, 2), 2, 'on the ground', 'Plane'): DECODE (BITAND (order_status, 4), 4, 'Assured', 'Certified')

  Please explain how know what value to use for the second parameter of the function bitand above? I have seen a few examples up bitand (column 64), bitand (column, 128), bitand (column, 256)

  What to do when you have more than 50 different status values? must we first arrive at a setting the time for each of the 50 state values?

  
  

  
  

  DECODE (BITAND (order_status, 1), 1, 'Warehouse', 'Post office').  DECODE (BITAND (order_status, 2), 2, 'on the ground', 'Plane'). DECODE (BITAND (order_status, 4), 4, "Insured", "Certified")

  Please explain how know what value to use for the second parameter of the function bitand above? I have seen a few examples up bitand (column 64), bitand (column, 128), bitand (column, 256)

  You already have a reference to the answer in your own message:

  • The first bit is used for location data:
    • 0 = Post Office. This corresponds to the values of 0, 2, 4 and 6.
    • 1 = the warehouse. This corresponds to the values of 1, 3, 5 and 7.
  • The second bit is used for the method:
    • 0 = air. This corresponds to the values of 0, 1, 4 and 5.
    • 1 = mass. This corresponds to values of 2, 3, 6 and 7.
  • The third bit is used for reception
  • • 0 = certified. This corresponds to the values of 0, 1, 2 and 3.
    • 1 = insured. This corresponds to the values of 4, 5, 6 and 7.

  Bits are binary. The 'first bit' is the wick at the right. The rightmost bit, once defined, type has a value of 2 ^ 0 or '1', that's what you use as the second parameter.

  The 'second bit' ((deuxieme right), once defined, has a value of 2 ^ 1 or '2' (in binary) If you use '2'.

  The 'third bit', once defined, has a value of 2 ^ 2 which is the "4" for you to use 4.

  The 'nth bit' has a value of 2 ^(n-1) - so the 5th-bit value is 2 ^ 4 which is 16 so you would use 16.

  What to do when you have more than 50 different status values? must we first arrive at a setting the time for each of the 50 state values?

  Yep! This small 50th has a value of 2 ^ 49-online 562949953421312

  "Warehouse AND on the ground" would be the TWO bits 1 and 2 which is binary 3.

  So, if you come to BITAND (order_status, 3):

  1. If the est0 or bit value is defined is Post Office AND Air.

  2. If the value is 3 the two bits are set is warehouse AND field

  You dig a hole for yourself using missions like yours since each bit is used for many things. For example the first bit means, post office and warehouse, depending on whether the bit is defined or not.,.

  But what happens if you have three or more 'locations?

  • The first bit is used for location data:

  • 0 = Post Office. This corresponds to the values of 0, 2, 4 and 6.
  • 1 = the warehouse. This corresponds to the values of 1, 3, 5 and 7.
• The second bit is used for the method:
  • 0 = air. This corresponds to the values of 0, 1, 4 and 5.
  • 1 = mass. This corresponds to values of 2, 3, 6 and 7.
• The third bit is used for reception
• • 0 = certified. This corresponds to the values of 0, 1, 2 and 3.
  • 1 = insured. This corresponds to the values of 4, 5, 6 and 7.

That makes no sense at all. How can 'Air' correspond to a value of "4", if this value means "Post Office" and "insured"?

You do not want to mix raw values like this.

And it is rarely necessary or enjoy combining several attributes to a single value. A best practice is that each value represents an attribute:

1 location

Bit 1 - Post office

Bit 2 - warehouse

Bit 3 - Garage

Bit 4-...

2. method

Bit 1 - Air

Bit 2 - ground

. . .

But the better question is why is of type bit mapping used at all?

I you LOVE bitmapping and it is extremely powerful when used in a case of correct use. Your use case does not seem appropriate.

• Need for clarification to varchar2 column

  I get xml that will be inserted in the local table messages
  It is, I don't really know the size of the incoming xml message data.
  Design of the structure of the table is now difficult.
  If I design the column in the table for column varchar2 with VARCHAR2 (4000) and if the message contains the value
  as 'SAM', 'GEORGE' (no more than 10 characters) then it does not seem good for the VARCHAR2 COLUMN (4000)
  Oracle does not create the table with VARCHAR2 (without specifying the size)

  Any suggestions?

  S

  There's no real difference if you use varchar2 (4000) or varchar2 (100). Apart from the obvious that you can store up to 4000 bytes, against only 100/characters multibyte.

  However, there are a few minor side effects. Few of them and a comparison of the performance is described here: http://arjudba.blogspot.de/2009/08/does-oversize-of-datatype-varchar2.html

  (1) the varchar2 column indexing 4000 could be a problem (the ora-01450 exceeded max key length).

  (2) the size of the table could be actually smaller for tables with many sparesly populated varchar2 4000 columns. I can't find the source for that at the moment, but it had to do with the way oracle reserves future space required for the column.

  (3) migration of rank is more likely to happen if the great texts are added (= update) later.

  (4) If you define a variable with % rowtype in the table, it will use more expensive space PGA

  (5) some tools like TOAD could get questions or need of more resources to operate on 4 k columns.

• I have need for adobe indesign, photoshop and illustrator, but especially the first two programs. student. How can I subscribe?

  Hello

  Find it me difficult to choose which package should I subscribe. I need to Indesign, Photoshop and Illustrator.

  Is it a monthly fee?

  Thanks for your help

  Hello

  You can buy the student and teacher of cloud of full creative package. Yes, there is a monthly fee for it, also, you can choose to pay once for the whole year (Prepaid).

  Please see the pricing and membership creative cloud plans | Adobe Creative Cloud

  You can also refer to:

  Terms of subscription

  General terms of use Adobe

• Need a clarification about the Installation

  Hi all
  I install in OBIEE 11 g on Oracle database 10g for the first time, so I would like to know if we need new schema of database Oracle or a new Instance.
  
  Please do not answer...
  
  
  Kind regards
  Arun
  
  Published by: 32956 on 5 April 2012 09:43

  Hello

  You can continue the installation of the oracle 10g database. Before that, make sure that you have downloaded all the files correctly and unzipped into one folder, including the installation of the regional coordinating unit files.

  It inludes two steps
  1. create patterns of Support using the remote control
  Refer to this link: http://allaboutobiee.blogspot.in/2012/03/obiee-111160-rcu-installation.html
  2. installation of OBIEE 11 g.
  Refer to this link: http://allaboutobiee.blogspot.in/2012/04/obiee-111160-step-by-step-installation.html

  It may be useful

  Published by: Nila on April 5, 2012 10:04

• Need for clarification on View-> test format

  I realize that the test format options for proofing by targeting a specific output. I realize also that they don't embed the file and in this respect does not necessarily affect the colors of a file. However, if you change one or the other, the changes you make will be influenced by your chosen proof Setup.

  My problem:

  I always bring my photos in Photoshop as Adobe RGB (aRGB) files, and I need to submit my agency to stock with this same profile (aRGB) photography. A customer who licenses photo could use it for a Web site or a magazine; You never know, so I can't stretch to one or the other.

  I noticed that if I choose the event to "Monitor RGB" format, then the photos seem like I want. If I change to 'work in CMYK', magenta get grossly over-saturated, which is exactly the opposite of what I expected of a smaller color space. I have always understood that proofing in "working CMYK" should make a photo less saturated RGB. But this doesn't seem to be the case. In all the photos, just magenta yells "working CMYK" and is significantly more pronounced in something else than my Monitor RGB. I can't nice sweet roses unless I have use "Monitor RGB." But I must deceive this configuration?

  So should what format of test I use? Obviously, I don't want to make color changes in the file that are influenced by a misconfiguration of evidence.

  FWIW, I use a calibrated S - IPS screen.

  Alanterra wrote:

  I still don't understand why everyone should get different colors when you "evidence on your monitor profile" - even tho printer Rick says you want.

  OK, I think I see my mistake.

  Configuration of evidence canned "Monitor RGB" is set to "keep the numbers." When keep numbers is off, I see no change between aRGB and the monitor profile.

  However, the lag persists, I'm just blind to it. Because the monitor profile translates into color for display, it limits what I perceive color, any color profile is using the image.

  OP here is a good way to understand this. Open an image from Adobe RGB. View: Proof Setup: custom, select the monitor profile, disable "keep the numbers." No change in color. Now, to turn Gamut Warning. These are the changes in color, that you don't see, once softened, with a profile of monitor proofing.

  This reinforces the rule that proofing with a monitor profile is a bad idea.