Need for clarification in regards if you upgrade memory and HDD invalidates the warranty/support Dell

Similar Questions

• The upgrade memory and HDD on Satellite Pro A300-1EA

  So, I'm new to this forum so first of all Hello to all!

  I plan to buy the Satellite Pro A300 1EA and I came to the conclusion that I need to buy more memory that the thing has already installed (2 048 MB).
  I tried to search for information through Kingston and OCZ, but have not found something solid on what memory modules are supported by the A300-1EA.

  The A300-1EA uses DDR2 800 Mhz type of memory (max 8192MB) instead of just dealing with one module 2084 installed, I had intended to get two of them.

  What I have to buy two identical modules, or can I increase memory by simply adding a module to match installed?
  So if anyone has an idea where I could find on the modules of memory supported, that would be swell! :)

  The other thing is quite the same, but only with hard disks. I found many potential readers than fullfill my needs for a faster drive (upgrade of 5400 RPM / min-> 7200 RPM), but I don't know which ones work with this laptop.

  After all, I'm in the impression that laptops are not so easy on these pieces as desktop computers.

  Thanks in advance!

  Satellite Pro A300-1EA belongs to the series of PSAG9E, and it seems that it was fitted on the Chipset Mobile Intel GM45 Express.
  As far as I know, that you can improve this laptop 4 GB RAM max so I wonder which tells you something about 8 GB support.
  You can upgrade the memory to 4 GB, and you can use the 200-PIN SODIMM 800 MHz modules.

  But to be honest I don t understand why you want to upgrade if the 32-bit Windows operating system will see only 3.2 GB due to the limitation of the 32-bit operating system.

  With regard to the drive HARD;
  You need a HARD drive 2.5 SATA.

  Concerning

• HP ProBook 470 G3: upgrade memory and storage in the HP ProBook 470 G3 17.3 "

  Hello

  I would like to buy HP ProBook 470 G3 17.3 "after reading the review of this laptop in Notebookcheck.net site,

  The laptop has a large 17.3 display, I think in ZBook but is too expensive so I need Quadro GPU or CPU high range this ProBook G3 17.3 "is the best choice as I thought... by the way

  My question on the model with the product number: T6D90UT

  CPU: Intel® Core™ i7-6500U with Intel HD Graphics 520 (2.5 GHz, up to 3.1 GHz with Intel Turbo Boost Technology, 4 MB cache, 2 hearts)

  RAM: 8 GB of SDRAM DDR3-1600 (1 x 8 GB)

  Internal drive: 1 TB 5400 RPM SATA

  Display: 17.3 '' diagonal backlit flat antireflection FHD LED (1920 x 1080)

  GPU: AMD Radeon R7 M340 - 2048 MB, Core: 1021 MHz, memory: 1000 MHz, DDR3, 64 bit interface

  Website of notebookcheck and HP site says the laptop has DDR3-1600

  http://www.notebookcheck.NET/HP-ProBook-470-G3-core-I7-6500U-Radeon-R7-M340-notebook-review.155142.0...

  http://store.HP.com/us/en/PDP/laptops/HP-ProBook-470-G3-notebook-PC-%28energy-star%29-t6d90ut-ABA#SP...

  While the HP parts store said that the portable DDR3L?

  Memory module 8 GB 1600 MHz, DIMM DDR3L PC3L-12800 (SHARED)

  Reference number: 693374-001

  Visit this link please

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=709EC0F980AD4FC3A887C0C5C3DB5C46&SearchIn=P...

  It's great so far but what make me confuse is the price of RAM, there are two parties with the same name, the two net price is $209.00 (it's too expensive there technical error or what)

  I can buy 16G. B (8 x 2) Kit from Newegg in the 57 to 100 such as price range below

  CORSAIR Vengeance Performance 16 GB (2 x 8G) 204-pin DDR3 SO-DIMM DDR3L 1600 (PC3L 12800) laptop computer memo...

  Priced at $ 69.99

  Case latency: 9

  Time: 9-9-9-24

  Voltage: 1.35v

  Multi-channel Kit: Dual Channel Kit

  Model #: CMSX16GX3M2B1600C9

  Item #: N82E16820233587

  But I say that if I could, but the same part in HP it will be better for the stability and the use of long date because the series HP's ProBook made with too many test and the part use inside, he is selected to make the laptop to run higher stability.

  If the price is right and it's expensive so can I but the corsair with latency case kit Timing: 9-9-9-24 and tension: 1.35v, is also the RAM inside the laptop DDR3L with voltage: 1.35v

  Another question if I want to use the SSD for the system slot m2 inside the laptop only used there not I think to buy

  SSD Samsung 950 PRO - Series 256 GB PCIe NVMe - M.2 SSD internal 2 inches MZ-V5P256BW

  and as a primary partition for the windows system and the 1 TB drive will be secondary disk for my files is that fine or the laptop works with some LAGS and slow.

  Here is the Service Manual:

  Manual

  It has doors on the bottom so is very easy to upgrade. It takes DDR3L-1600 low voltage (1.35) up to 2 x 8 modules for total 16 concerts. It is the specified memory:

  8 GB (PC3L-12800 1600 MHz, DDR3L) 670034-001

  It has a slot of the WSSD m2 using modules with this form factor:

  

  If you need assistance more let us know.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Upgrade memory and HDD on Satellite A350

  Hi all

  I have a satellite a350 laptop someone can tell me what is the biggest hard drive I have and memory please
  Thank you

  Please be so kind and display the name of the exact model (A350-xxx).

• Post a message (need for clarification)

  Hi all
  This is going to be a long post, because I want to give good background.

  I wrote a message on the cancellation of the automatic updates. Here, it is pasted:

  "I have an old HP Pavilion dv7-4180us Notebook PC using Windows 7 Home Premium. It seems that I can never stop automatic updates. There is a problem.
  On the one hand, we are informed to install updates to keep our machines running well, up-to-date, to increase security. But I found that when these control sooner or later my computer, that my device is malfunctioning and I have to run the system restore.

  QUESTION: how to cancel - once for all - automatic updates all the?
  QUESTION2: How do you know which programs are bad operating system and are necessary?

  The damage has been done is usually a bad slowdown in operations. Start-up takes longer, opening files is slower, and I got an impossibility to open my system thanks to the fingerprint recognition.
  About me:
  -00359 - 899 2687 OEM product ID - processor: Intel (R) Core (TM); 5 UC; M 460 @ 2.53 GHz
  -Memory (RAM) installed 4.00 GB - system Type: 64-bit operating system
  -Prod. No.: XG834UA #ABA
  All comments welcome. Thank you. »

  (end of my first message block)

  A response has been sent by a peer:
  He pasted my original message in the upper part of his, then added the comment below. I have stick.

  "Windows updates are updates most of the time required of course there are glitches but then you must restore to the last frame of work and try to update again." Constant updates is a good indicator of your operating system is corrupted and you need for your system back to factory recovery install and update again.
  -First follow help links.
  Do not know how to display help click on the following link.
  First time here? Learn how to post and more
  -For disk recovery only.
  Get a HP USB recovery or HP recovery disc drive
  Read this before ordering your recovery discs! (United States and Canada only)
  Don't PM me if you do not allow PM in return. »
  (end of message from One Peer, glued)

  I tried to send a response to a peer. I clicked on the button "Answer" in the bottom right of his message, but my answer is back to my original thread. The 1st link in the message is 'Learn to use the forum.' It is said (stuck),

  A brief subject title including:
  • Name of the product
  • A brief description of the problem
  • A detailed message with the following information:
  o name of the product and operating system
  o How do I find my product name and number?
  o Description of the problem, including:
  o error messages, if applicable
  o changes to your system until the problem occurred
  o do not include the serial number of the product or personal information.
  (end of dough)

  With this link, I guess that a counterpart found my original post did not argue correctly. BUT: I entered the information about the product. on my first line and below the o/s. According to info. the link, I did everything that I need.

  QUESTION: was my insufficient message following protocol?

  Approved One also said in his message, (quote is pasted): ' don't not PM me if you do not allow PM in return '.
  In my attempt at a peer response, I wrote (pasted below).

  "Your last comment, ' Don't PM me..." If you do not have... "
  Could you explain that? Do you have I have somewhere a "PM" option for answering machines cannot delete "PM" me? Not to my knowledge. Finally, please be so kind as to explain what is "PM". "(end of dough)

  QUESTION: given that my answer to the q. above might not have reached a counterpart, can someone pls. specify what is "PM"?

  Another issue is the link 'Learn to use... forum.' A link on this link goes to "" tips ask the ' very best Question. "» "I opened that and saw this picture:

  

  In the image is "CNF". It's a serial number. Confusion which is on the first link "learn... use... forum", it is said, 'Do not understand the serial number of the product, or any personal information'.
  Please clarify this discrepancy, betw the statement and the image.

  LAST QUESTION: want to post this message, I thought that it wasn't on laptops, then search "HP Expert Forum. However, under "Choose a Board" has a long list, then "Show all" and "HP Expert Forum" comes. However, by clicking on it, I can't see in the empty bar where I need to place it. What I am doing wrong?

  Please follow the long message. All responses appreciated.

  AtAF

  I can't answer all your concerns. I will try to answer some of your questions and give you some places to look for answers.

  ---------------------------------------------------------------------------------------------------------------

  P.m.s are Messages private, somewhat like a mail between posters, but always using the guidelines and the presentation of the general forum.  In general, most people have this feature enabled.   I have impossible (not) comment in particular on the use of any Expert of the service.

  More information: How to send a private Message

  ---------------------------------------------------------------------------------------------------------------

  The bit about Product Information reminded members do not provide the serial number of their computer.  People post their serial numbers, their send addresses, same numbers on occasion.  It is an invitation only and we strongly advise anyone to publish personal information on this public Web site.

  ============================================================================

  Windows updates

  Everyone has an opinion about updates.  On a Windows 7 system, the need for updates - once the system is installed and the main updates are installed, AND assuming that it does not install no matter what additional programs or software - is mainly to preserve the system of some security problems are hiding everything.

  If you want to turn off Windows updates, then do it.  You are the admin.  It is your machine that is at risk - or not - and it is your decision to make.

  You can switch automatic updates / stop in

  Control Panel > set view icon > Windows Updates > settings

  Windows updates - turn auto update or disable

  ============================================================================

  Essential programs

  As a general rule, you must the programs running on the computer when it starts up which are included in the list of programs in the system and Microsoft programs in your startup file configuration list.

  How to use MSCONFIG in Windows 7

  Note the general Word - depending on what you have installed on your computer, your boot file can be filled with, well, an interesting range of programs that can indeed have slowed down the performance of your system over time.   Yet once, however, most of the programs - unless they are poorly written, or you forced them into the startup sequence when they belong there – are not by themselves slowing down the system by law "to be in the startup list.  In other words, you might consider doing some homework before snatching the programs in this list.

  ============================================================================

  -Comment-

  Your computer contains only 4 GB of RAM and he is older; We say "vintage".  This is not to start with a lot of resources and Windows 7 can, in itself, consume a lot of what is available.  Windows 7 is greedy.

  Add a gourmet operating system, a file system (perhaps) fragmented, a couple of badly written programs (bad code), less fast blazing to the Internet, and you might have the recipe for a slow computer.  I'm not saying that your computer is under one of these weaknesses, only that many computers don't have these problems.

  -------------------------------------------------------------------------------------------------------------

  Resource monitor

  Resource hogs could be traced using the resource monitor.  Even on Windows 7, the tool is pretty sophisticated. You can spend time learning how to use it effectively.  However, the program is very effective to help you quickly catch programs that are hogging resources (memory and network, for example) that you have available.  For example, if you have a program that took all the memory and ran Amok, so to speak, the monitor will be able to quickly show what offending program to the wrongdoer.  In most cases, you can kill the culprit (identify, right-click > kill).  If you trash your system and really hang things up, press the power button and accident-shut down the computer.  You really want to do it very often. but every Admin has made at least once a clearing.

  -------------------------------------------------------------------------------------------------------------

  Maintenance

  If the system is corrupted due to lack of maintenance, then you can provide this service by giving him some of the attention, he needs without actually going and perform a complete restore.  (Shudder).    Good maintenance, especially on a vintage with a limited capacity system helps the computer make the best use of its resources.

  Good care tips can be found here:

  Improving the performance of the system without adding memory (Windows 7)

  -------------------------------------------------------------------------------------------------------------

  Fingerprint login

  After that all other maintenance was performed, it is possible that the following might help to restore the connection of fingerprints.  Understand that I have NOT used digital personal in a certain number of years and this is a quick overview of the subject.

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  If you use a laptop:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your model of laptop
  • Start the computer and connect
  • Reinstall your driver validity sensor:

  validity sensor Driver V2.1.0.2 RevA Win7 sp52354

  • Restart the computer and log in
  • (Re) Install the Digital Persona software

  sp50048 Digital Persona Fingerprint Reader Software V5.1.0.175 Rev A

  At this point, I restart the computer once more and sign in, although this software is so robust that you could get away with jumping final restart.

  Reference:

  HP Pavilion dv7-4180us Entertainment Notebook PC Drivers

  -------------------------------------------------------------------------------------------------------------

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  Original title:

  Win7 victory explrer click dsktop & mployment plces & get eror msg file is not a CDSA wth to prfrmin ths field prgrm. pls instl one prgrm so is alrdy instld Credit Union assc ltvds cntrl pnl prgrms

  I don't know how to fix. Help, please.    Win7 windows Explorer click

  Office & recent locations & grterror msg:
  This file does not have a program associated with it for performing this action. Please install a program or, if it is already installed. create an asssociationin the default programs control panel.
   
  Information given in the new thread:
  Error Msg When you try open office spaces & recent since the win Explorer

  when im in windows Explorer and click on the desktop or the recent places the link I get a msg of error and they will not open, but all others open. I posted pictures of error msg to skydrive yesterday.

  Hello

  Welcome to the Microsoft Community Forums.

  I see you've found an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  1. Have you made changes on the computer before this problem?
  2. What is the full error message?

  I suggest you to report to us the screenshot of the Advanced window so that we can understand what exactly the situation.
  
  See:
  Use SkyDrive download collected files and post screen shot/image
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  The average while you can try the following steps and check if the error reappears.

  Method 1:

  Step 1:

  Start the computer in safe mode and check the number.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Put the computer to boot and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  It will be useful.

  Back with the details so that we can help you further. We also indicate the result of the suggested steps.

• Hi, how can I start my programs? An old verson of Adobe creative suite 2 premium for universities? I have a new computer and I find the activation code of the can´t. The old computer was rejected. Can you help me?

  Hi, how can I start my programs? An old verson of Adobe creative suite 2 premium for universities? I have a new computer and I find the activation code of the can´t. The old computer was rejected. Can you help me?

  Please check: error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

• Need for clarification about Webcenter and Jdeveloper Total confused.

  Hi guys,.
  
  IAM new product oracle and my self very fresh to the world of tools and oracle, when I did a little research on the package tools, I found Webcenter as an interesting tool and liked to hear. With the support of Mr YannicK Ongena I learn some concept and through some possible configuration but once all the setup I have query below, and mistook them... Now am not able to satisfy the Webcenter.
  
  I have a query, the developer should be installed the requirements.
  JDeveloper and database or something there.
  
  In the current configuration * I installed.
  WebLogic
  Database
  RCU
  JVM
  WebCenter Suite.
  
  As mentioned above this two configurations are different methods or should I install Jdeveloper with the current configuration?
  
  I'm confused a lot with the current configuration.
  
  If the Jdeveloper and adjustment of the current methods are to different then the one who will be recommended by the guide of environment pl in time real me on this.
  
  If possible help me with a better discription learn how Webcenter.
  
  Thank you and best regards,
  Naveen

  Best place to discuss these things on my blog :)

  First of all, you should look at the requirements. Depending on whether you need to decide what to use:
  (1) Portal of the WebCenter which is a completely customizable to environment in place your portal from scratch. This is done by using JDeveloper. If you want a WebCenter portal, you need not install the suite WebCenter full with the data base and the UCR and so on. You should only install WebLogic with Webcenter libraries. However, if you want to use services such as blog, wiki, documents, debates and so on, you will need to install the suite with an oracle DB and run the RCU to create repositories.

  (2) WebCenter spaces. This environment is installed when you install webcenter suite. This is the managed server WC_Spaces. It is a collaborative environment that requires no JDeveloper. You should only use JDeveloper to extend the spaces by adding your custom taskflows and portlets.

  If in short to the requirements:
  (1) WebCenter Portal:
  -JDeveloper
  -WebLogic + libraries WebCenter
  -Database at least the MDS repository (which can be created by the UCR)

  (2) the WebCenter spaces
  -WebLogic + WebCenter suite
  -Database at least the schema MDS and WebCenter (can be created by the regional coordination unit)

  If you want to learn how WebCenter, I recommend to learn early on. You don't need to go through the complete installation, process that can be difficult is you again for Oracle products.
  Just download JDeveloper studio edition: http://www.oracle.com/technetwork/developer-tools/jdev/downloads/jdev11115-405165.html and install extensions WebCenter. If you do this, you can't even install a database and so on.
  With this configuration, you can easily create your own portal without coding a lot. An ideal way to learn the basics of the webcenter.

  Hope this helps :)

• Element of the page to send: need for clarification on variable bind and online help

  Hello
  
  For dynamic actions "Code from PL/SQL Execute", online help for the PL/SQL Code is as below:
  
  Specify a single anonymous PL/SQL block, which will be executed on the server to run.
  
  You can reference another page or link elements of the application from your application here by using syntax (for example: P1_MY_ITEM), but if you don't you need to include in the "Items to submit Page" attribute also.
  
  For example:
  
  Start
  
  setCommission(:P1_SAL,:P1_JOB);
  
  end;
  
  In this example, you must also include P1_SAL, P1_JOB in the "Items to submit Page" attribute.
  
  When I read this I understand that I must include in the 'Page of Items to send' attribute if I want to use bind syntax for them. In fact, I include in the "Elements of Page to submit" attribute if I can submit their values on the server and use this new value in the PL/SQL Code. If I want to use are already in session and I want to use these values, but not the new values (updated on the screen, for example), I don't have to submit to the server and I can use the bind syntax to get values that are already in session state.
  
  It was perhaps obvious, but it wasn't for me before I did a few tests with the attribute "Page of Items to submit". I don't know if I'm clear. English is not my mother tongue.
  
  Could someone confirm or not the behavior I described?
  Perhaps the online help could be updated to be more obvious if what I described above is true.
  
  Thank you

  Hello

  Your interpretation is correct. And you can use the old values in the syntax of the bind variables, provided that you have not changed the in your PL/SQL.

  Glance in this way, when a page is loaded from an HTML document is created in the browser that reflects the State of session maintained on the server. But at the time wherever the page is loaded, the two are completely separate and can be manipulated independently of eachother. JS and dynamic Actions using JS work only on the DOM HTML template while Ajax and the PL/SQL work on the Session State on the server.
  So when the page is be displayed two, HTML and session state, can be completely different depending on how you handled the.

  The DOM HTML template and Session state again get synchronized (new values recorded or scrapped) in the treatment of the consignment and the State resulting is again used to render him refresh / reloaded page.

  Kind regards

• Need for clarification for cold backup and restore

  Hi all...
  
  I have a lot of confusion about the cold backup and restore section.
  
  Already I posted a scanario this topic and I would like to know a few points of clarity to understand.
  
  
  1. I had cold backup two days before
  2. I create an object * (EMP) * and inserting some records can deliver log switch continiously.
  3. manually I deleted all the physical files (data files, files of control, files, papers, redolog files)
  4. then I published STARTING FORCE MOUNT;
  5. in this case, I get error identification control file.
  6. cold two days before all of the restored files backup
  6 then I run database recovery using backup controlfile until cancel;
  7. I'm issuing select * from emp; I get error

  select * from EMP
  * ERROR at line 1:
  ORA-00942: table or view does not exist

  my QUESTION IS
  
  After that cold backup is complete, I created the table emp...
  during the restoration of old back "there is no emp table"
  
  * - Then I can retrieve table emp? -If Yes, please explain about this... *.
  
  
  Note: REF - LINK https://forums.oracle.com/forums/message.jspa?messageID=11056341#11056341
  
  -Link above says what I did? In this thread, I ask you to concept and logic...
  
  Please, consider NOT like ' * DOUBLE. "

  Not sure why you're confusing this issue? In your other thread, you applied a backup who had two days and there is no evidence that you apply to this log file to archive that had the table create in it. So if you have not restored this log file to archive who had your create table command, it will not be recovered. The most important for you to understand, it's that you have to have the newspaper the point for which you want to retrieve other archiving your recovery will not be able to move forward.

  Aman...

• HP pavilion dv7 1260us: upgrade memory and processor for hp pavilion dv7 1260us

  I was wondering if possible to upgrade my memory and processor... hp pavilion dv7 1260us?

  Here are the specs:

  Plug

  You have an AMD Turion RM-74 processor and 4 GB of RAM. The RAM is DDR2 and it may take 8 GB of DDR2, but that the memory of any reputable vendor is crazy expensive, like $150 ++ for 2 x 4 gig modules.

  Here is the Service Manual:

  Manual

  The top of the page compatible processor is an AMD Turion™ Ultra Dual-Core 35W ZM-86 2.40 GHz with 2 MB of L2 cache

  If you want to go from 2.2 ghz to 1 meg to 2.4 ghz with 2 MB of L2 cache L2 cache, may be a treatment of 20% energy improvement. Not enough, IMO, to justify the difficulty because it is still not in the ballpark of machines of today.

  You can buy the processor from a dealer renowned for $15 with free shipping. That should tell you what the demand is for her. Basically obsolete.

  http://www.eBay.com/ITM/AMD-Turion-X2-ultra-dual-core-Zm-86-2-4GHz-dual-core-Laptop-CPU-TMZM86DAM23GG-/401122492329?hash=item5d64c37fa9:g:KMsAAOSwZetXO2Wh

  I replaced motherboards in several series dv7-1000, and it is one of the harder to take apart laptops. Many cables in strange tablecloth and Remora in all directions.

  We are ready to help in any way possible with the upgrade, but in this case probably the best advice that I can give you is "don't".

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Envy 15 t: upgrade memory and hard drive HP ENVY 15t

  Hi guys, I just bought the HP Envy 15 not touch t (ae100) with the following characteristics:

  -CPU & graphics: 6th generation Intel Core i7-6700HQ Quad Core processor + Intel HD Graphics 530

  -Memory: 8 GB DDR3L - 1 DIMM

  -Hard drive: 1 TB 5400 RPM hard drive

  I have a few questions about it. First of all, my laptop doesn't have a vacant unit of m2 where I can insert an SSD and if not a SATA 3 2.5-inch SSD fits instead of the hard disk without additional fixing or need support.

  Second, is there an empty memory slot to insert a 8 GB of additional ram.

  Any kind of assistance will be extremely useful and thanks in advance.

  No crack m2. From the Manual:

  Only dedicated support of storage SATA m2 (Port 0) (models with i7 processors and 4 GB memory graphics)

  So if you have Intel HD video only you do not have a slot m2.

  Here's the manual for your use:

  Repair manuals

  Yes on the memory 8 GB 2d module:

  Both not accessible/upgradable module DDR3L-1600 slots double channel memory support 16 GB of RAM in the following conƭgurations ● 16384-Mo (8192 MB × 2)

  Access to the memory and hard drive are obtained by removing the lower cover. Technically this is not allowed to the end user if security is jeopardized.

  A standard 2.5 inch SATA SSD to integrate perfectly in the original hardware for hard disk 5400 RPM. It is a highly recommended update. The 16 GB of RAM not so much, but it's one of those things "might as well" If you are determined to go there.

  Let us know if you need more information.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Compaq 7600 Ultra Slim: Upgrade memory and video on a HP Compaq 7600 Ultra Slim

  Hello

  I have two questions that maybe someone could help me with regard to computer HP Compaq 7600 Ultra Slim (Base).

  Quesition 1: motherboard has three locations of memory instead of 4, this means that memory can only be improved to 3 s gig? I am currentlly have three 512 memory chips for altogether 1.5 Gig, but I want to upgrade to the maxi I think it is 4 GB. (I had tried to use gig two chips and 512, 1 but they didn't work because the 1 GB have been 6400's.)

  Question 2: I tried different ways to install a PCI-E video card but I do not see how it fits. The rear panel has a scsi interface in the PCI riser card. I removed the SCSI card, but no matter how I tried, I don't see how to hold the card. Any body is not picture on how it must be inserted?

  Thank you

  Hello:

  Here is the link to the quickspecs for the dc7600.

  http://h18002.www1.HP.com/products/QuickSpecs/archives_Division/12253_div_v1/12253_div.PDF

  See the info to the USDT where the x are applied.

  Maximum memory is 3 x 1 GB (see page 6 and 9).

  Graphic... you can not add a conventional PCI express graphics card.

  See page 11 for graphics only map available.

  The slot that resembles a location PCIe x 16 is for a special HP. planning DVI ADD2 card.

  And even if the quickspecs state that this map is available for the USDT (at page 10) this document of specific information that is not.

  http://isvpatch.external.HP.com/HPPTF2/Drvlib/docs/HPADD2SDVOPCIeDVI-dadapter.PDF

• Is it possible for Firefox to remember multiple combinations of name and password of the user to a Web site?

  My husband and I use Yahoo! Mail, but each has our own account. We are constantly put in front and in back. Enter the full name of the user and the password by hand each time it's boring, but it's not fair for one of us to have Mozilla to remember the user name and password. It would be great if there was a way for Mozilla to memorize our usernames and passwords. No idea if there is a way to do something like that? Thank you!

  30 Firefox should be able to store more than one name and password to the Yahoo site.
  Firefox should offer to store the name and the password for the other institutions.

  Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

  There are other things that need your attention.

  Note that your system details list shows several Flash plugins.

  • Shockwave Flash 13.0 r0
  • Shockwave Flash 12.0 r0

  You can find the installation path of the plugins on the topic: plugins page.

  • http://KB.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins

  You can view the installation folder of Flash player for multiple Flash player plugins and delete older versions of the plugin (NPSWF32) and possibly (re) install the latest Flash Player.

  • (32-bit Windows) C:\Windows\System32\Macromed\Flash\
  • (Windows 64 bit) C:\Windows\SysWOW64\Macromed\Flash\

• Upgrade memory satellite A110-103 - the Bios shows only 1 GB of RAM

  {color: #000000} Dear Forum Toshiba,

  I own a Toshiba Satellite A110-103 (PSABE6) bought in 2006 of the Belgium.
  I have trouble about an upgrade of RAM for this laptop. The laptop was originally a Samsung 512 MB of RAM.
  I tried to upgrade the RAM to its maximum capaity supported 2 GB.
  I bought and installed 2 Kingstone SODIMM 1 GB Value Ram DDR2 PC2 4300 units compatible with the laptop, but

  in the BIOS, I see only 1 GB of RAM.
  I tested each RAM separately and they work very well. The problem is that when I install in my

  locations of the laptop, my BIOS sees no Ram.Instead 2 GB 2 GB, it shows only 1 GB. I updated my BIOS for more later

  version 1.70 (for XP), but the laptop continues to show only 1 GB.

  I tested the RAM separately:
  -inserted only 1 stick in the drive and the pc started ok showing 1 GB of RAM
  -then I inserted the same stick in another location and it also worked well showing 1 GB of RAM
  - then I checked another unit of the RAM in the same way and worked well
  -When I try to put 1 GB of Ram and the old 512 MB RAm the BIOS correctly showed the new value of 1.5 GB
  -i also checked the other 1 GB of ram and the old 512 MB of ram and showed good again in the Bios with the value of 1.5 GB
  - but when I tried to put the 2 ram set units to obtain the BIOS only detected 1 GB 2 GB.

  Here's the description detailed 1 GB modules that I try to install:

  SLOT #1
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Reference number: 9905293 - 0.14A00LF
  Serial number: 6ACC0C46
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  SLOT #2
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Serial number: AD0CCE10
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  What should I do?
  Help, please!

  It IS concerning.
  Marius Militarescu

  [email protected]

  {color}

  I think the problem is that the two s of RAM are not compatible, but it is not explained to me because use you two identical modules.

  In your case I return the RAM to the computer dealer and say the modules work together in your notebook, but your laptop definitely supports 2 GB of RAM.

  I think that there is no other way because you have updated your BIOS to the latest version.
  Here is the part number for RAM Toshiba compatible:
  1 GB OF DDR2 400/533 (PA3411U-1M1G)