Need hardware for VMware ESX5

Similar Questions

• need help for VMWARE 8 with Server 2008

  Hi, need your help for my current problem,

  I am currently using vmware workstation 8 for my MCITP LAB. I have windows 7 OS and host in vmware W/S I installed server 2008 and windows 7 Pro. I have a static IP for the host operating system (10.1.1.31 255.255.255.0 10.1.1.1) DNS - (203.X.X.35 203.X.X.36) and also, I configured two comments with a static IP address. Server 2008 - (10.1.1.191 255.255.255.0 10.1.1.1) DNS (127.0.0.1) have active directory and the DNS service is installed, and there also is the main DNS 127.0.0.1 and for the comments of Pro windows 7 - (10.1.1.192 255.255.255.0 10.1.1.1 (10.1.1.191), the primary dns is pointed to comments Server 2008) I use a bridge network for host OS and the two guest operating system, but when I tried to connect to the internet there is no connection as it is not the internet for the two guest operating system and there is no internal connectivity to the two guest operating system. virtual bridge Protocol option, it is also so please need your help to solve this problem, I can do my TP.

  the main solution, I need, that's how I use the PDC 2008 sever in same vmware W/S with three customer reviews OS I can do my work Practicle without buying a few physical computers. Please see the attached diagram-

  I have core I5 with Virtulisation

  8 GB Ram

  HARD DRIVE 500 GB

  Wireless WLAN cards

  DVD R/W

  Please need help as soon as POSSIBLE.

  Thank you and best regards,

  Martinuzzi

  OK, for the windows 2008, try to install the DNS service (Add Server Manager roles) in there... (you cannot point the others it as DNS if it does not act as DNS)

  also in it the IP configuration, set as follows:

  IP 10.1.1.31

  Subnet 255.255.255.0

  Gateway 10.1.1.1

  Primary DNS 10.1.1.31

  203.x.x.35 secondary DNS (you can also add the 203.x.x.36)

  Do the same for your guests to WIndows 7.

  Make sure all are workers and they can ping each other...

  If everything is OK, you should have internet on them...

• I need help for VMWare WS 8

  Hello

  I'm about to evaluate VmWare workstation 8 but immediately ran into a problem where I simply can't find an answer or a clue how I can possibly create a virtual machine, as described below. As I am trying to provide as much as possible for what I intend to create, please bear with me for the description below might be a bit long:

  1. I'm migration of Windows XP 32 bit on a machine Intel Core2Quote 9400 to Win7 64 bit on an Intel Core i5 2500 K PC processor.

  2. among all the possible VM that I might want to create with VMWare 8, one of the very crucial VM that interests me is a WinXP BACK (i.e. MSDOS ver 5.5) like the one I get when I open a fullscreen WinXP DosBox.  i.e.
  (a) I want to launch my new PC with Win7 64 bit.
  ((b) in the Win7 as indicates it a) above, I want 8 WS VMWare to run a virtual machine, which is essentially an MS-DOS 5.5 environment.
  
  3. Thus, it is possible for me to create a virtual machine such as in 2. (b) above? How do I create that? i.e. for 2.b) above, I don't want any Windows XP, I just need his full-screen DOSBOX.

  Moreover,.
  Is it possible to run a virtual machine MS-DOS 6.22, is there than a fact easily MSDOS 6.22 VM that I can import into my VMWare 8? I don't think I'm able to find my old MSDOS 6.22 floppy, even if I can, I do not have a disc torrent with my new PC...

  to start a machine virtual without EFI-Bios from USB you must boot from a Plop - bootmanager.iso first - then once the Plop bootmanager has started you can let him call the USB device.

  The problem with this approach - you may need to run a few times - often the USB device only will start with a USB 1 speed during the first attempt

• Need hardware for the new installation of R12 (12.1) under Linux

  Cheap DBA
  
  Kindly advice me the hardware, CPU and memmory for the following specifications for the new installation.
  
  100 users.
  
  500 GB Production database
  Application of Production of 500GB
  500 GB of Test instance.
  
  Linux operating system.
  
  Oracle R12 Application application (12.1)
  
  No configuration RAC and DR.
  
  
  Best regards
  SG.

  PGO

  Please visit the links referenced in this thread.

  Sizing
  Re: sizing...

  Kind regards
  Hussein

• Need hardware for ASA HA

  Hi all, just out of curiosity. If I'm going to set up an active/passive failover with ASA primary contains module AIP and backup w/o AIP, will it work?

  In accordance with the requirements of failover, you must have the AIP module in the ASA high school also.

  Kind regards

  Maryse.

• Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Only a single vCenter Server Heartbeat license is necessary to protect the components of the vCenter Server installed remotely, including SQL Server. A single license is also used for several UNIQUE for vCenter Server services protected authentication servers. A license is required per instance of vCenter Server.

• HP Compaq dc7700p: need driver for PC serial port

  "Hello, I have a desktop Tower" HP Compaq dc7700p Convertible Minitowers "running windows 7 Ultimate and need driver for PCI Serial port... here's hardware id:

  PCI\VEN_8086 & DEV_2997 & SUBSYS_2802103C & REV_02
  PCI\VEN_8086 & DEV_2997 & SUBSYS_2802103C
  PCI\VEN_8086 & DEV_2997 & CC_070002
  PCI\VEN_8086 & DEV_2997 & CC_0700

  Thank you

  Hello:

  You need this driver... You may need to install it manually.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3232104 & swItemId = ir_46768_1 & swEnvOid = 2103 #.

• Satellite A135-SP4088 - I need drivers for Windows XP

  I need drivers for Windows XP model Satellite A135-SP4088, this model does not exist on the official page.

  Hello

  On this forum, I founded a few guys with the same problem. I assume that your laptop is to South America. Am I right about that?

  I checked support US the site and unfortunately your laptop model is not listed there. I'm afraid you must identify the hardware components and try to use the drivers from the site of technical support to the United States.
  Sorry, but I don't see any other solution

• Satellite A200-1 g (PSAECE) Win XP. Need drivers for SATA HDD and GeForce 7300

  Hi all.
  I would install XP instead of Vista on my note. As far as I know, XP has no builtin for SATA driver. I found no drivers for GeForce 7300 on the toshiba Web site. So I need drivers for SATA HDD and GeForce 7300. Where can I find them?
  Thank you.

  Hello

  Why must you SATA XP drivers? You are not able to install XP because the HARD drive is not visible?

  With regard to the nVidia drivers:
  It seems that the A200 notebooks were shipped with a different hardware configuration.
  Some laptops come with the Intel GPU and some with nVidia graphics card.
  The Intel GPU driver is available on the Toshiba page.

  Graphic driver nVidia can be downloaded from the site Web of Toshiba Canada or 3rd sites like www.omegadrivers.net or www.laptopvideo2go.com

  See you soon

• Pavilion dv6 6168-tx: HELP! I need driver for windows 8.1

  Please help me...

  I need driver for my laptop, someone help me...

  If you need drivers, follow these steps:
  1. in search of charms bar type devmgmt.msc. Select the file resulted in the left pane. This opens the Device Manager.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• Need drivers for Win 7, Pavilion 15-n077so

  Hello

  I went down laptop my mother to win 8 to Win 7.

  Now I just need help acquisition drivers.

  Name: 15-n077so

  Series: [edited by Moderator]

  Thanks in advance

  / Carpet

  You are the very welcome.

  Your template probably does not come with Intel smart technology that's why the driver was not installed connection.

  I'm surprised that the Intel graphics driver failed because the two laptops have the Intel 4600.

  No worries... this graphic driver works.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23714&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

  Now what is the unknown device, usually that's the one that is missing the driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  If this isn't the driver you need, I need to display the hardware for the unknown device ID.

  Use this guide as an example of how to get to the window for the unknown device device ID.

  http://www.WikiHow.com/find-hardware-ID

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Need drivers for the Sidewinder Precision Pro X 03-57540

  I NEED DRIVERS FOR THE SIDEWINDER PRECISION PRO XO3-57540 JOY STICK.

  Hi LARRYPEDEN,

  Visit the following link to download the driver:

  http://www.Microsoft.com/hardware/en-us/d/SideWinder-X3-mouse

  You can also follow this step to do the same thing:

  a. double-click the type of device you want to update or change.

  b. right click on the device driver specific, you want to update or change.

  c. click put to update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  More information on:

  How to manage devices in Windows XP

• need driver for network controller

  I need driver for network controller for my hp probook 4530 s

  Hardware NETWORK CONTOLLER ID

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  Hello:

  You need this driver...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Need Driver for HP Pavilion DV6-6c38TX WLAN

  Hey everybody,

  I recently bought a HP Pavilion DV6-6c38TX and decided to wipe and upgrade them with a fresh install of Windows 7 Ultimate.

  This means, of course, I need drivers for some hardware components and am fine with everything except WLAN.

  I tried the drivers (Intel and Ralink) of the support page for the laptop and yet it still won't install.

  I'm fairly certain that the WIFI adapter is an Intel one, but could someone point me in the direction of the right driver!

  As this is a new laptop which was released only recently, it is difficult to find appropriate elsewhere help so any help is greatly appreciated!

  Hello:

  You have a WLAN Atheros adapter.

  Here is the link to the latest drivers for it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  See you soon,.

  Paul