need help for VMWARE 8 with Server 2008

Similar Questions

• I need help for VMWare WS 8

  Hello

  I'm about to evaluate VmWare workstation 8 but immediately ran into a problem where I simply can't find an answer or a clue how I can possibly create a virtual machine, as described below. As I am trying to provide as much as possible for what I intend to create, please bear with me for the description below might be a bit long:

  1. I'm migration of Windows XP 32 bit on a machine Intel Core2Quote 9400 to Win7 64 bit on an Intel Core i5 2500 K PC processor.

  2. among all the possible VM that I might want to create with VMWare 8, one of the very crucial VM that interests me is a WinXP BACK (i.e. MSDOS ver 5.5) like the one I get when I open a fullscreen WinXP DosBox.  i.e.
  (a) I want to launch my new PC with Win7 64 bit.
  ((b) in the Win7 as indicates it a) above, I want 8 WS VMWare to run a virtual machine, which is essentially an MS-DOS 5.5 environment.
  
  3. Thus, it is possible for me to create a virtual machine such as in 2. (b) above? How do I create that? i.e. for 2.b) above, I don't want any Windows XP, I just need his full-screen DOSBOX.

  Moreover,.
  Is it possible to run a virtual machine MS-DOS 6.22, is there than a fact easily MSDOS 6.22 VM that I can import into my VMWare 8? I don't think I'm able to find my old MSDOS 6.22 floppy, even if I can, I do not have a disc torrent with my new PC...

  to start a machine virtual without EFI-Bios from USB you must boot from a Plop - bootmanager.iso first - then once the Plop bootmanager has started you can let him call the USB device.

  The problem with this approach - you may need to run a few times - often the USB device only will start with a USB 1 speed during the first attempt

• Need help for dependent lists with ADF boxes.

  Hello
  
  I am doing a project that use dependent list of tree areas.
  E.g. State->
  -> College
  List of courses of the College selected above-->
  
  The way it should work is when I select the State automatically I want to return to the corresponding list of colleges in that State, and as soon as I clicked on the colleges I want to be able to get all the courses that are given in the order.
  To implement the first two list boxes I create trees on JDeveloper and and SelectOneChoice of the State and the colleges. In the link editor I link the first view with the second, then the second point of view with the third and at this stage if I run the first SelectOneChoice would give me the entire State and the second SelectOneChoice could give me the list of schools that exist.
  
  Now on the third point of view that I create a variable binding and I put a in which indicate =: TheBindingVariable on the query.
  Also I updated the first SelectOneChoice the outoSubmit set to true, id to StateId property and the property of PartialTrigger CollegeId.
  On pageDef.xml in the bindings, I create action shape where I select the third view of Collection Date and select Action as ExecuteWithParams. And I set the value under the parameters section of #{bindings.state.inputValue}.
  Under executable files in pageDef.xml, I have create an invokeAction and I put links = ExecuteWithParams.
  The first SelectOneChoice on the ChangeValueListener I have create a new ManageBeans that generate me a java class and I create a new method as well to use it to change the binding on the second SelectOneChoice variable.
  
  Here is the method:
  public void Change_StateId (ValueChangeEvent valueChangeEvent) {}
  
  String StateId;
  valueChangeEvent.setPhaseId (PhaseId.INVOKE_APPLICATION);
  ADI FacesContext = FacesContext.getCurrentInstance ();
  ValueBinding vb = adi.getApplication ().createValueBinding("#{bindings}");
  DCBindingContainer = (DCBindingContainer) vb.getValue (adi) bc;
  
  {if (valueChangeEvent.getNewValue (). ToString(). Equals("0"))}
  StateId = 'MA ';
  OperationBinding opBindingCollegeLovIter = bc.get("ExecuteWithParams") (OperationBinding);
  opBindingCollegeLovIter.getParamsMap () .put ("TheState", StateId);
  opBindingCollegeLovIter.execute ();
  } else {}
  DCIteratorBinding statesLovIter = (DCIteratorBinding) bc.get("CollegeProvaView1Iterator");
  Line rw = statesLovIter.getRowAtRangeIndex (((Integer) valueChangeEvent.getNewValue ()) .intValue ());
  StateId = (String) rw.getAttribute ("State");
  OperationBinding opBindingCollegeLovIter = bc.get("ExecuteWithParams") (OperationBinding);
  opBindingCollegeLovIter.getParamsMap () .put ("TheState", StateId);
  opBindingCollegeLovIter.execute ();
  }
  }
  
  I don't know what I did wrong because I am new in this field and a little help would be really useful.
  
  I use 10.1.3.1.0 JDeveloper and Oracle SOA Suite 10.1.3.1.0.
  
  I'd appreciate any help.
  
  Thank you very much.

  Hello

  Is there a particular reason why you can not implement the simplest solution? :

  -create 3 object view (vo1, vo2 vo3)
  -create 2 show links between <->vo1 vo2 and vo2 vo3<->
  detail - insert the display objects in the application as master - detail - module
  -Drag & drop on the page of the range of data such as lists of navigation control
  -set the ID and partial triggers and autosubmit

  Kind regards

  Branislav

• How to reset the password for administrator on windows server 2008 datacenter eddition before the login in vmware

  How to reset the password for administrator on windows server 2008 datacenter eddition before the login in vmware

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Problems with Server 2008 R2 Kerberos with Mac and CentOS machines? Need to re - join domain

  We are having a problem with our Mac and Linux / CentOS machines constantly having to be re-attached to our AD domain.
  We are able to join machines to the domain successfully, but after a few weeks or if authentication is broken and we again join them to the domain.
  I see Security event logs on our domain controller when kerberos authentication fails.
  On the linux server - I see this message in the logs
  -binding failed: server not found in the kerberos database.

  I'm guessing this has to do with Server 2008 R2 and incompatible mac / linux versions.

  Any ideas?

  Hello

  I suggest you try to post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  It will be useful.

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn

• I need help for activation of the real administrator account.

  I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.

  I need help for that.

  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Read the above info.

  See you soon. Mick Murphy - Microsoft partner

• Manager of customization with Server 2008?

  Does anyone know if the specification of customization Manager will work with Server 2008 model?

  When I create a new set of specifications through the wizard, there is no option to choose anything other than "windows" or "Linux".  The section below these options makes reference to a custom sysprep answer file that let me hear XP/2000/2003. Bascially Microsoft has deleted with Sysprep in 2008 (you can run a very simple, no custom version to change the SID and do an OOBE) or create an XML part that is personalized through Windows AIK. So I am wondering if it is supposed to be for 2008 too? I have a feeling that it is not. How do others are 2008 deployment models?

  Does anyone know if the specification of customization Manager will work with Server 2008 model?

  Yes, he does.

  When I create a new set of specifications through the wizard, there is no option to choose anything other than "windows" or "Linux".  The section below these options makes reference to a custom sysprep answer file that let me hear XP/2000/2003. Bascially Microsoft has deleted with Sysprep in 2008 (you can run a very simple, no custom version to change the SID and do an OOBE) or create an XML part that is personalized through Windows AIK. So I am wondering if it is supposed to be for 2008 too? I have a feeling that it is not. How do others are 2008 deployment models?

  It's the same as it was never really.  The only difference is that now you don't have to have the sysprep files copied in prior vCenter.  I have specificaitons of customization for 32-bit and 64-bit 2008 and 2008 R2.  Everything works fine.

  Good luck!

• HP hp Server ml310e gen8 v2 install with Server 2008 4 t hard drive can be used completely

  Know one on hp hp Server ml310e gen8 v2 install with Server 2008 and why 4 t hard drive cannot be used entirely to the server? How can I change the settings of the Bios MBR TPG mode?

  This would be better served if posted in the Forum of Support Business company instead of the global consumer support forum.

  http://h30499.www3.HP.com/

• Query for windows small business server 2008 SP1

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hey AAAAAAAAAAAAtif

  It's an instance of vista installation

  Try the link below sbs forum

  This forum is for General Discussions on Small Business Server 2008, R2, 2003, 2003 SP1, 2003 and earlier versions. Gateway available NNTP Client if you wish to participate via a Newsgroup Reader. Read the sticky at the top of the forum Post.

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  Walter, the time zone traveller

• I need help for my reader to USB drive on my windows 10 ACER?

  I need help for my reader to USB stick on my chrome windows 10 plug ins acer. Can you help me?

  What Adobe application that you use?

  This is the Adobe Media Encoder forum, and you did not mention anything on this subject. If you can let us know what Adobe application, you need help, we can help you make the right forum.

  Thank you

  Regalo

• Hello, I need help for cancel the payment on my adobe account.

  Hello, I need help for cancel the payment on my adobe account. I'm from Peru, Im paying a monthly fee as a student. Help, please...

  Cancel your membership creative cloud

• Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hey ihorl18351266,

  Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.

  Kind regards

  Ana Maria

• Is there a version redistributable install drive XI? I need one for a PC with no internet.

  Is there a version redistributable install drive XI? I need one for a PC with no internet.

  Free Adobe Reader 11 software is available for distribution beyond single-user installation volume.

  You can see the following link for more information: http://www.adobe.com/products/reader/distribution.html

  Kind regards

  Ravi