Need help with error code "WindowsUpdate_00000646".

Similar Questions

• Need help with error code 0 x 80070424 and 0x6D9

  I need help please!  Spent an entire day trying to figure this even ONCE!  When I try to change my windows firewall settings I get error code 0 x 80070424.  I worked at it so long, I forgot when I get the error 0x6D9 code.  But here is my BIGGEST problem, my computer won't let me do DOWNLOADS at all.  I even checked to make sure that the downloads are enabled in my internet settings.

  Any help would be GREATLY appreciated!

  Hi LindaL5299,

  I, too, got the dreaded error codes and spent much too much time looking for and try to apply the patches on the right!  I hope that I am sharing will help you!

  Have you seen this particular thread? (if you have, my apologies.)

  MS Answers: "I keep on getting error 0x6d9 and 0 x 80070424 code."

  If this isn't the case, you can check it out.

  Watch more precisely for the reply by VIJAY B.

  As a Microsoft Engineer, Vijay must know a few things about these formidable error codes!

  I have summarized his answer for you here.

  METHOD 1:

  If you have installed, UNINSTALL McAfee Firewall;

  AND

  T urn WINDOWS firewall "'WE ' "

  To ensure that Firewall service Windows is activated:

  1.   Click on:                         Start
  2 (in the search box) type: service

  3.   Select:                             services
  4 right-click right on: Windows Firewall service

  5.   Click:                              Stop

  6 right-click AGAIN on: Windows Firewall service

  7.   Click:                              START

  METHOD 2:

  Online virus scanner by using the Microsoft Safety Scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  METHOD 3:

  Try to install the latest updates from Windows Updates
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  
  

  METHOD 4:

  Run it Microsoft FixIt! tool (in the following article to see if that helps)

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

  *************************************************************************************************************

  Keep this site in your 'Favorites', too!

  WINDOWS SEVEN FORUMS    An informative, resourceful AND Microsoft-recommended WIN7 users including Q & A community can save you hours on a Google search! I BOOKMARKED the site (and you could want, too!)

  *************************************************************************************************************

  Hope ONE of these methods is right for you, Linda!  I DO "feel your pain!

  As a company of independent workers, online "etailer", my time AND my livelihood depends totally my PC!  I spent many an hour (s) search on the error codes and try to find fixes.  So, I hope that what I have learned and have just shared can lend to fix your problem (s), also!

  FINGERS CROSSED!

  WendeeMcCee

  "The he Miss Fix - It [If I can!] ". "

  Empathetic to the woes to find fixes for those darn "error codes".

  I hope I can help IF I can, but

  I not an 'IT' pro!

• Help with error code 80073712 with windows update...

  I have problems with fixing error code: code 80073712 in my windows update program... I tried to do the checksur.exe... and after having told me he found 10 errors... He only corrected a mistake and said its missing files to correct the other 9 errors it finds... I have over 3000 photos on the computer more than a ton of documents that was for my personal use and then my church congregation as well. The music I like to keep it on the hard drive and really don't want to lose to re - install windows to fix backup... would only store my documents and photos... as I tried to record my songs on a DVD that says that he accepts the mp3 files, but it didn't work... so I lost 3 DVDs, it took to keep the music... Are there other ways to solve this problem without having to save and not lose the files... I really need to keep most of them away to printing purposes and everyday... Thanks a lot for all the help that can be given.

  I already tried the methods of fixing this error code 2... None of them helped or solved the problem... y at - it something else I can do...

  I was not able to install updates since November 13, 2009... updates how am I missing that will affect the security of my operating system and is updated just a better option...

  I was not able to install updates since November 13, 2009... updates how am I missing that will affect the security of my operating system and is updated just a better option...

  You are missing a lot of critical security updates (especially if the updates published on 10 Nov 09 never installed).

  You don't want to switch to Win7 with the computer in its current state (nor would you be able to do, I think).

  Vista SP1 or SP2 installed?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  See...

  .. .you you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712":
  http://support.Microsoft.com/kb/931712

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help with error code: 80070490

  I had problems with my computer for quite awhile... I noticed my computer slows down to a snails pace recently and decided to check the updates. Apparently, updates important are not to proceed with the installation or something... I am sure, that's the problem with my laptop... but again once I'm not very good with computers so any help is appreciated... Thank you

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Tips from Microsoft is to do a Vista repair install:

  Windows Vista and Windows Server 2008 to solve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:

  1. Close all applications and restart the computer.
  2. Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
  3. In the settings window, click install now.

     Note If Windows does not automatically detect the DVD, follow these steps:

     1. Click Start
        Collapse this includes this image

        

        , and then type Drive : \setup.exe in the box to start the search .

        Note The Drive placeholder is the drive letter of the computer's DVD.

     2. In the list of programs , click Setup.exe.
     3. In the settings window, click install now.
  4. Click connect to get the latest updates for installation (recommended).
  5. Type the CD key if you are prompted to do so.
  6. Click Yes to accept the Microsoft software license agreement.
  7. On the which type of installation do you want? of the screen, click upgrade.
  8. When the installation is complete, restart your computer and try again to install updates.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is a good tutorial to read about a repair installation:
  

  If you do not have a DVD of Microsoft Vista, borrow one from a friend.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

  Mick Murphy - Microsoft partner

• need help with error message

  When I try to open internet explore or other applications on my computer crashes upward. It comes to getting the error message:

  the exception unknown software exception (0xe0434352 occurred in the application at location 0x00007FFDC385A1C8

  Please help thanks.

  Hello

  We are here to help.

  To resolve the problem you are experiencing, follow these troubleshooting steps:

  Perform a clean boot to verify if a third party application is causing the problem. For more information about how to perform clean boot, check it link.

  If the error code persists, it is possible that there is a problem with the application itself. In this case, download and run the Microsoft .NET Framework repair tool. For the repair tool, click onhere.

  Let us know how it goes.

  Kind regards.

• Hello [need help with exit code 7]

  Hello, I am having trouble installing the Premiere Pro and After Effects, the download is canceled without reason and this cloud creative reports "installation-fault read more ' link in this:

  Exit code: 7
  Please see specific errors below for troubleshooting. For example, ERROR: DS003...
  -------------------------------------- Summary --------------------------------------
  
  -fatal error 1, 0 error (s)
  
  
  
  -Payload: Adobe first Pro CC 2015 9.0.0.0 {38C72D42-0672-43B1-9E05-E7631684F9A1}.
  
  FATAL: DS003: installation package is possibly corrupt. Download the installer again and try again. (Impossible to extract '2015\payloads\AdobePremierePro9AllTrial\Assets1_1.zip C:\Users\wilmar\AppData\Local\Temp\{3F3A1FCC-6F0C-419D-BAF9-6527D5BAC6FF}\PremierePro_9_ LS20\Adobe Premiere Pro CC' to ' C:\Program Files (x 86) \Common {38C72D42-0672-43B1-9E05-E7631684F9A1} ".) : Error 1392 O land or pasta esta corrompido e ilegivel.)
  
  -------------------------------------------------------------------------------------
  
  

  
  Even if I restart the download is not finalized and have the same final repeatedly need help. The only software that has been installed has the Media Encoder, I didn't even want. Thanks I await a response

  [Title edited... MOD]

  you use the cc desktop app to install your adobe programs?

  If so, errors ' Exit Code: 6 "," Exit Code: 7 "|"» CS5, CS5.5

  If not, Download Adobe Creative Cloud apps | CC free trial Adobe

• need help with the code "meter."

  Hi I had this form of testing that executes_query on the new block instance.
  See the image below:
  
  
  [http://i95.photobucket.com/albums/l133/element81/screenies.jpg]
  
  I have this code on the button (next question) that captures the selected answer and compare it to the correct answer and then move to the next record:
  
  "If: blk_exam.radio_group76 =: blk_exam.answer_id then.
  -message('correct');
  -other
  -message('wrong');
  : blk_exam.score: =: blk_exam.score + 1;
  end if;
  next_record;
  "
  
  the problem is I want to create a score counter, but I do not know how to display it in the text (circled in blue) element.
  
  p.s. I'll hide the score counter, hurt later use it to record the score in the database.
  
  
  Ty in advance

  Hello
  No, there are no gaps. In fact, there is error in your code.

  Scenario 1:
  If the blk_exam is on the top of blk_score when I run the blk_exam form works with execute_query but the text of the note element is a bit turn off so I have to click on to a grey, she and her show '0' because of its first value 0 then walla pressing "next question" with my codes work... it increments...

  For this scenario, you use NVL then it will work as...

  :NON_DB_BLOCK.SCORE_FLD:=NVL(:NON_DB_BLOCK.SCORE_FLD,0)+1;
  

  Scenario 2:
  If I make blk_score on top of my blk_exam the text of the note element contains the value 0, but the test module does not work still... I had to click on any text element or anywhere on the form first seized execute_query and shows the question and choices... but then after that, it works well...

  So now don't need to keep the DB NO BLOCK on top just keep the issue/block on top. Normal then run query which is now to work it will work.

  hope you can imagine the two scenario hehe...

  Hope you can imagine the fault encoding ;)

  -Clément

• Help with error Code 8024D00E! Improperly installed Windows Update?

  Update for Vista 64-bit Windows does not allow me to install the updates, and it does not seek to new updates. Error code 8024D00E keeps popping up, and without WU works correctly, I can't use my Zune software. Help?

  3-hours-late duplicate of http://answers.microsoft.com/thread/af5f3930-3814-48cc-bb3b-7cfcc6bc37b1

• I need help with a code msvcr71.dll

  I can't get a game to work on my laptop due to MSVCR71.dll error code

  Read this thread, it explains how to install this file.

• Help with error code irql_not_less_or_equal

  Windows 8 error irql_not_less_or_equal

  Do not know how to read the minidump but I compressed it and here is a link

  https://onedrive.live.com/redir?RESID=B78DD8520B559AB7! 204 & authkey =! AFcAakJybuCgUOM&ithint=folder%2c.zip

  Thanks for any help!

  Hello

  This seems to be a fairly new computer still in warranty. If so be sure to contact ASUStek
  Supported. As ASUS OEM is responsible for the proper functioning of these two material and
  Windows. Whatever the cause, it will be them to solve.

  The 0 has CAUSE ntkrpamp.exe Bug_Check which is a component of Windows, which means
  Another thing he has led astray. No other real help in the minidump.

  Bugcheck A, {0, 2, 0, 816e0522}

  Probably caused by: ntkrpamp.exe (nt! KiTimerWaitTest + 2ba)

  1. check with ASUStek support, their drivers and documentation online and ask in their forums
  on known problems. Update the BIOS, chipset low level drivers and ask in their forums
  on known problems.

  BiosVersion = T100TA.227
  BiosReleaseDate = 27/02/2014
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = T100TA
  Family = T
  SystemVersion = 1.0
  SystemSKU = ASUS-TabletSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = T100TA
  BaseBoardVersion = 1.0

  
  2 carefully check for malware.

  3 check memory very carefully (see memory test methods below).

  4 use the other methods below to solve the problems.

  5 after using ALL methods if necessary run Driver Verifier to see if it can indicate a
  CAUSE (see methods of auditor of drivers below).

  ========================================================

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate these methods Windows 8/8.1 (there is little real difference):

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows. (applies to Windows 8/8.1)
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8/8.1)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  BCCode: 0a 0x0000000A

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  Make sure that the drivers, BIOS and chipset of low-level drivers are all updated by checking manually
  system manufacturer and device manufacturers sites.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

  Control bug IRQL_NOT_LESS_OR_EQUAL 0x0000000A value a. This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  IRQL_NOT_LESS_OR_EQUAL parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	Memory referenced
  2	IRQL at time of reference
  3	0: read 1: write
  4	Memory address

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Resolution

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.

  2. Press F8 to character-based menu that displays the choice of operating system.

  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.

  2. Try disabling the cache in memory of the BIOS.

  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.

  4. Make sure that the latest Service Pack is installed.

  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.

  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are compatible with the version of Windows being installed. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

  Here is an example of debugging: (see this link)
  http://msdn.Microsoft.com/en-us/library/ff560129 (v = vs. 85) .aspx

  BCCode: 0a 0x0000000A<-- read="" this="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ============================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  =========================================================

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  Redesign of chkdsk and the new model of health NTFS
  http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

  -----------------------------------------------------------------------------------------------------

  Translate these methods Windows 8/8.1 (there is little real difference):

  References to Vista also apply to Windows 7 and Windows 8/8.1.

  It's my generic how updates of appropriate driver: (also update the BIOS and the low level)
  drivers for chipset - see the website of the motherboard manufacturer of the system)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How do I run the memory diagnostic Windows 7 (and 8/8.1) - in Windows 8/8.1
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ==========================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve problems of drivers in Windows Vista or 7 (or 8/8.1)
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Need help with Error #1009

  Hello, I am working on a Flash game where you navigate in different rooms. Each room is located in a frame on the main timeline. I get an error message #1009 when I navigate to certain parts, but each image almost the same code, so I don't know why some executives encounter this problem while others are very well. When the error message that I am always directed to the 'room' I clicked on, but all the buttons in this room disappear and you are then stuck there and having to restart the project. I looked through other forums where people had this error message similar but I could not find a solution that could help me, so I apologize for the display of such a common problem! Here is a screenshot of the error message I get, which says:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  at project1_fla::MainTimeline/frame4() [project1_fla. MainTimeline::frame4:43]

  at flash.display::MovieClip/gotoAndStop()

  at project1_fla::MainTimeline/enterElevator3() [project1_fla. MainTimeline::frame12:25]

  

  Here are links to the screenshots of the debugging session where it points to the lines of code that contains the error and also screenshots of my code in these pictures:

  Frame error 4 part 1

  Frame error 4 part 2

  Frame error 12 part 1

  Frame error 12 part 2

  Code for chassis 4 part 1

  Code for chassis 4 part 2

  Code 4 room 3

  Code for chassis 4 part 4

  Code for frame 12 part 1

  Code for frame 12 part 2

  Frame 4 is labeled as 'elevator' and armature 12 is "medEntrance". I know that the problem is to jump from an image to the image, but I honestly have no idea what would be the error. I double checked all my code and it must be correct, and what makes it even more confusing, is that some rooms work perfectly while others have this problem and they all use the exact code, but with different names of MC! :/ Something I noticed is that the rooms which are most often linked to (for example that the lift can bind to three different "floors" or frames) are those who encounter this problem. But I chose this pair in particular because it contains the least amount of code I do not understand why have several frames, a link to a picture in particular would be a problem, but it's my first time using Flash and AS3 so I don't know any with its limits.

  Sorry for the overload of code and messy information! I thought it's better to provide too much information than too little and thanks for your help, it is much appreciated!

  rather than distributing your rooms in different key frames,

  Move them to separate the layers

  and use only the first image of each layer

  then do what amy suggested and is wirtie a document class that will have all your key code in

  or put all your code on the first frame of the first layer (separate layers where you have your rooms on)

  So, it becomes available for all your parts.

  To hide rooms you don't currently need put all the parts inside a table:

  var rooms: Array = [room1 room2... room100];

  then write a function

  function showRoom(_index:int):void {}

  for (var i: int = 0; i<>

  {if(i==_index)}

  rooms [i] .visible = true;

  }

  else {}

  rooms [i] .visible = false;

  }

  }

  }

  for example, when you move to the next room call sth. as

  showRoom (4);

  This will hide all parts in addition to the 5th

• Need help with LabVIEW code for motor control.

  Hello

  My name is Sasi. I'm a grad student BME working on my thesis topic of assessment for back pain spine implants. To do this, I'm building a test machine that would apply pure moments of a specimen of the spinal column. I use LabVIEW 8.5 to implement the control of a brushless AC servo motor. My requirement is

  Step 1: Initialize the engine.
  Step 2: Start moving it to a uniform to the right PLAN (this value of RPM too user can enter).
  Step 3: while doing step 2; at the same time read the couple cell data (acquisition of data using Asst.). DAQ o/p is 0 v to 10 V; 0 v is 10 Nm n
  10 v is + 10 Nm
  Step 4: What torque reached + 10 Nm, i.e. 10 V, the engine stops.
  Step 5: from the position where the motor stopped (IE not need to return to the initial position) start moving in the opposite direction to the same
  Uniform rpm as in step 2 at the reading of data in the cells of the couple.
  Step 6: once more what torque reached-10 Nm, i.e. 0 V, the engine should stop.
  Step 7: Repeat "Step 2" to the "step 6' 3 times.
  Step 8: Reset engine position.

  So far, I managed to get the engine to move backward @ a desired vel, the accl, deceleration for 3 cycles before n n. I enclose my code. I have a problem inserting the code for reading DAQmx amidst all this. Can someone help me.

  Thnks,

  Sasi.

  Hi Sonia,.

  I took a quick glance to your problem and I think I have a solution for you.  I certainly agree with the suggestion of the use of parallel loops Lynn.  This will allow the portion DAQmx run uninhibited by the part of the motion, and vice versa.  In addition, you need only perform an iteration of the loop of the movement whenever the voltage level exceeds a threshold.  Thus, by performing an iteration on the code of movement in the same loop are you iterate over DAQmx code, you essentially waste processor.

  I created a VI that should do what you are wanting.  I tested it on me and it works very well.  You have a tweak a few things to apply to your system (such as motion Council DAQmx and physical channel ID, etc.).  I used two parallel loops and event programming.  Basically, the loop of movement starts the engine turns at the specified speed.  Once the engine is running, he expects the DAQmx loop to tell him that the voltage value has crossed the threshold.  When the voltage value exceeds the maximum threshold (I put a value slightly less than 10 to jitter and saturation), the DAQmx loop indicates the loop of the motion that it may end its iteration.  The motion loop stops the motion, causes a reversal and repeats the motion.  Once the movement has begun, he expects the DAQmx loop once again to tell him that a threshold was held, but this time, it's looking for a minimum threshold.  I used "Occurrences" to implement the event programming in LabVIEW.

  I've commented the code pretty thoroughly, so I hope that comments will answer all remaining questions.  The advantage of using programs that focus on the event for this is that you save time processor, and your movement is more closely synchronized with the DAQmx.  Instead of one iteration of the loop of movement as fast as you can, updates every hour, you just put in pause and wait for the other loop to tell you when to start up again.  Meanwhile, the processor doesn't have to worry about an iteration of this loop over and over again.  In addition, when the accident occurs, you catch him immediately, instead of having to wait until the next iteration.  Thus, you are more closely synchronized with the DAQmx code portion.

  I hope this will help you.  Please report if you have any questions about the code or its implementation.  Good luck!

  
  

• Help with error code 80072EFE

  I tried several fixes for Windows Update to work, but I still get the error 80072EFE code. Windows suggested going to a program called "Fixit", but when I click on it, another window pops up saying that windows cannot connect to this site. I'm not an expert, but would classify me as pretty good for solving problems, but this one left me speechless. I have not installed anything back to my computer. The last time that I could do a update 12/15/10. Help!

  ERROR_INTERNET_CONNECTION_ABORTED 0X80072EFE

  - You can encounter errors related to the connection of temporary when you use Windows Update or Microsoft Update to install updates

  What is the result of a security/antivirus installed (SS); It's current subscription; its definitions are up to date; has whatever it is detected the last time that the system has been analyzed for the presence of malware?
  Were there updates/updates recently installed for the installed AV/SS?

  Another aspect that may be at play here is the home network. The networked system via a wireless or wired router connection?

  This specific error may be temporary or, as has been the case in the course of the 4 or 5 months indicated by messages on this forum, it's a sign that malware prevents the system to connect to the update servers.

  The system is having trouble connecting with all the addresses of Microsoft.com?
  Suggest you see if the system can access the malware scanners online, such as these-

  ESET Online Scanner
  Windows Live OneCare for Windows Vista and Windows 7 security scanner (requires Internet Explorer 32-bit)
  Emsisoft Web Malware Scan

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• need help with the code for update of a record (conditional release)

  all together
  
  Published by: 871431 on July 9, 2011 18:30

  871431 wrote:
  Hello

  I am looking to update a table that contains documents approved & not homologous, for this combination date & funds it should allow the only recording not approved.

  what I did is check if the recording is U if the incoming value is not approved for this error of combination stimulus funds & date, but if I need to update this unlicensed recording error... so I need to update record, and trigger the error if try to insert another disc not approved.
  Hope I am clear...

  Not clear for me

  Help pls

  Please realize and understand that everyone here talks about SQL

  Please post DDL for table
  Please provide the sample/test data & then explain with the help of data from the trial itself said it that results should be & why

• Rookie Flash needs help with error messages when you perform a simple calculator in AS3.

  I'm doing a simple calculator I followed this guide:

  http://www.YouTube.com/watch?v=5k3h37YKZJI

  It's my code.

  var Hnum:String;

  var PCnum:String;

  var calc:Number = 25;

  var Total: String;

  NUM1. Restrict = "0-9";

  num2. Restrict = "0-9";

  Est_btn.addEventListener (MouseEvent.Click, Calculate);

  function calculate(event:MouseEvent):void {}

  Hnum = num1.txt;

  PCnum = num2.txt;

  Total = parseInt (Hnum) * calc;

  Total.toString ();

  Total_txt. Text = String (Total);

  }

  I get 3 errors:

  Scene 1, Layer 'Actions', frame 1, line 14

  1067: constraint implied a value of type flash.text:TextField to a type unrelated to a String.

  Scene 1, Layer 'Actions', frame 1, line 15

  1067: constraint implied a value of type flash.text:TextField to a type unrelated to a String.

  Scene 1, Layer 'Actions', frame 1, line 16

  1067: constraint implied a value of digital type to type String unrelated.

  I have two areas named num1 and num2 and box input text and dynamic text named Total_txt.

  This should be so simple, I don't really know what im doing wrong?

  Any help would be really appreciated.

  MrB

  If you look at the tutorial, I think you will see that you are using "txt" where "text" is needed.  'text' is a property of a textfield, identify the text that contains the textfield object.  I don't know if you're doing something where the num1 object contains another object named txt, but I think that my first sentence catches the problem.