Need help for slideshow code in DreamWeaver.

Similar Questions

• Need help for slideshow

  I edited a video, which is basically still images. However, I have chosen images in all sizes, thinking, wrongly, that what eventually once uploaded to YouTube with the same footprint. Is there a step process that can help me achieve this goal?

  I would like that all the scenes in my video to appear, once uploaded to YouTube, to be of the same size. Some images are larger than others, but those who are smaller have a black border surrounding them. I admit that I need a lot of help with that. Thank you.

  Post edited by: Kevin Monahan

  Reason: your title is too long

  So you're ready for the next show!

  Or, maybe just happy you did it through this one and very well if you have never to do it again.

  Are you able to use the ' ~ ' key to the entire window and "control ~" for full screen?

  Another feature may be useful for the next is "automate to sequence...". ».  If your source of the layer film is ready just to the right, it can be a huge time saver.  Even if you compare it to what it's like 'Text to Table' action in Microsoft Word.  If the text is formatted just right, you end up with a large table to the research.  If a single line of text is disabled, you can spend a lot of time tweaking things (and to test your patience).

• I need help for the reactivation of DreamWeaver MX 2004.

  My computer system is blocked and I have to re - install programs.  I have an old DreamWeaver MX 2004.  I have re-installed and now difficult to activate online.

  The program is no longer supported and there is no path upgrade discount for her, but you CAN activate it and use it (but not online, MX2004 activation servers are long, long gone)...

  Use the code from this page (not your current activation code) and the activation process: error: cannot activate | Product Macromedia

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I need help for activation of the real administrator account.

  I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.

  I need help for that.

  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Read the above info.

  See you soon. Mick Murphy - Microsoft partner

• I need help for my reader to USB drive on my windows 10 ACER?

  I need help for my reader to USB stick on my chrome windows 10 plug ins acer. Can you help me?

  What Adobe application that you use?

  This is the Adobe Media Encoder forum, and you did not mention anything on this subject. If you can let us know what Adobe application, you need help, we can help you make the right forum.

  Thank you

  Regalo

• Hello, I need help for cancel the payment on my adobe account.

  Hello, I need help for cancel the payment on my adobe account. I'm from Peru, Im paying a monthly fee as a student. Help, please...

  Cancel your membership creative cloud

• Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hey ihorl18351266,

  Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.

  Kind regards

  Ana Maria

• Need help finding my code of the original key.  Have the update level but need the original.  Can you help me?

  Need help finding my code of the original key.  Have the update level but need the original.

  How did you come to lose?

• Need help with error code 0 x 80070424 and 0x6D9

  I need help please!  Spent an entire day trying to figure this even ONCE!  When I try to change my windows firewall settings I get error code 0 x 80070424.  I worked at it so long, I forgot when I get the error 0x6D9 code.  But here is my BIGGEST problem, my computer won't let me do DOWNLOADS at all.  I even checked to make sure that the downloads are enabled in my internet settings.

  Any help would be GREATLY appreciated!

  Hi LindaL5299,

  I, too, got the dreaded error codes and spent much too much time looking for and try to apply the patches on the right!  I hope that I am sharing will help you!

  Have you seen this particular thread? (if you have, my apologies.)

  MS Answers: "I keep on getting error 0x6d9 and 0 x 80070424 code."

  If this isn't the case, you can check it out.

  Watch more precisely for the reply by VIJAY B.

  As a Microsoft Engineer, Vijay must know a few things about these formidable error codes!

  I have summarized his answer for you here.

  METHOD 1:

  If you have installed, UNINSTALL McAfee Firewall;

  AND

  T urn WINDOWS firewall "'WE ' "

  To ensure that Firewall service Windows is activated:

  1.   Click on:                         Start
  2 (in the search box) type: service

  3.   Select:                             services
  4 right-click right on: Windows Firewall service

  5.   Click:                              Stop

  6 right-click AGAIN on: Windows Firewall service

  7.   Click:                              START

  METHOD 2:

  Online virus scanner by using the Microsoft Safety Scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  METHOD 3:

  Try to install the latest updates from Windows Updates
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  
  

  METHOD 4:

  Run it Microsoft FixIt! tool (in the following article to see if that helps)

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

  *************************************************************************************************************

  Keep this site in your 'Favorites', too!

  WINDOWS SEVEN FORUMS    An informative, resourceful AND Microsoft-recommended WIN7 users including Q & A community can save you hours on a Google search! I BOOKMARKED the site (and you could want, too!)

  *************************************************************************************************************

  Hope ONE of these methods is right for you, Linda!  I DO "feel your pain!

  As a company of independent workers, online "etailer", my time AND my livelihood depends totally my PC!  I spent many an hour (s) search on the error codes and try to find fixes.  So, I hope that what I have learned and have just shared can lend to fix your problem (s), also!

  FINGERS CROSSED!

  WendeeMcCee

  "The he Miss Fix - It [If I can!] ". "

  Empathetic to the woes to find fixes for those darn "error codes".

  I hope I can help IF I can, but

  I not an 'IT' pro!

• I need help for my project

  Good day to you all

  I am Mohammed Ali, and I am doing my final project. I would like to have your help and your support to complete my project. in fact I build a mobile application on Blackberry JDE with UI contained Student ID and password it suppose to connect with http://www.ucsi.edu.my/ses/ to check and then get the next page to display on the blackberry app?

  So, someone has idea how to do it?

  I'd appreciate efforts, thank you in advance

  Mohammed Ali

  On BlackBerry, you have a plethora of options:

  If you just want a link to an existing Web page just mobile create weblink as:

  import net.rim.blackberry.api.browser.Browser;
  import net.rim.blackberry.api.browser.BrowserSession;
  import net.rim.device.api.ui.UiApplication;
  
  public class simpleshortcut extends UiApplication {
  public static void main(String[] args){
  simpleshortcut instance = new simpleshortcut();
  instance.enterEventDispatcher();
  }
  
  public simpleshortcut() {
  BrowserSession site = Browser.getDefaultSession();
  site.displayPage(https://yourwebsite);
  System.exit(0);
  }
  }
  

  You will need to adjust the code for 6.0 devices, although I think... can't remember...

  You can also use the widget framework or keep native java and use a httpconnection. Go to the forum of java and the research of httpconnection. There is no shortage of information... you can also read the post of PeterStrange at the top of the java forums. Its quite likely the best thread beginner on Earth... I have it in my favorites. also find the java forums to "versatilemonkey", it is a few threads that deal with a custom class versatile monkey wrote that make connections much easier. You have to decide from there that the best approach for your application...

• Hello [need help with exit code 7]

  Hello, I am having trouble installing the Premiere Pro and After Effects, the download is canceled without reason and this cloud creative reports "installation-fault read more ' link in this:

  Exit code: 7
  Please see specific errors below for troubleshooting. For example, ERROR: DS003...
  -------------------------------------- Summary --------------------------------------
  
  -fatal error 1, 0 error (s)
  
  
  
  -Payload: Adobe first Pro CC 2015 9.0.0.0 {38C72D42-0672-43B1-9E05-E7631684F9A1}.
  
  FATAL: DS003: installation package is possibly corrupt. Download the installer again and try again. (Impossible to extract '2015\payloads\AdobePremierePro9AllTrial\Assets1_1.zip C:\Users\wilmar\AppData\Local\Temp\{3F3A1FCC-6F0C-419D-BAF9-6527D5BAC6FF}\PremierePro_9_ LS20\Adobe Premiere Pro CC' to ' C:\Program Files (x 86) \Common {38C72D42-0672-43B1-9E05-E7631684F9A1} ".) : Error 1392 O land or pasta esta corrompido e ilegivel.)
  
  -------------------------------------------------------------------------------------
  
  

  
  Even if I restart the download is not finalized and have the same final repeatedly need help. The only software that has been installed has the Media Encoder, I didn't even want. Thanks I await a response

  [Title edited... MOD]

  you use the cc desktop app to install your adobe programs?

  If so, errors ' Exit Code: 6 "," Exit Code: 7 "|"» CS5, CS5.5

  If not, Download Adobe Creative Cloud apps | CC free trial Adobe

• Tecra R840 - need help for installing the SSD

  Hello

  Sorry, again, but I really need help with that?
  My new ssd (arriving in a few days) is a Plextor M5P which is 7 mm thick! My Tecra R840-16J have a thickness 9.5 mm HDD and what I've seen is no caddy!
  I would be grateful all the tricks for installing the ssd drive in my Tecra!

  Thanks for your time,

  Paulo

  Hello Paulo

  As far as I know that some models are available with drive HARD and some with SSD these models with SSD have small SSD support. SSD is fixed by 4 screws in this medium.

  I put t really know how to help you now. Maybe you should contact the nearest Toshiba service provider and ask for help. I think they can check the part number of this door - or maybe order one for you.

• Re: Need help for the restoration of the system

  Hi, I need help!

  I recently bought a Toshiba Satellite. I had some problems when trying to install some programs, some seem to fail. I wanted to clean the computer with system restore disc, only to find a record of 32-bit to a 64-bit computer.
  There is a repair of the setting system installed on the computer but it does not work, when I put it on disk, files, it cannot be opened.

  I can restore the system somehow repair; It must have been damaged by a virus. It should come with a big warning that the disk is not compatible!

  I have burned one day drive the first if I d just so you know! Any advice?

  Hello

  At first, I must say that you should tell us what model of laptop you have exactly.

  I put t know what cell phone you have and what you have with her, but in fact, it's that many laptops come with preinstalled OS 64-bit and 32-bit version on DVD.

  In this case, you must create own 64 bit preinstalled use Toshiba recovery media creator recovery DVDs. Alternatively, you can install 64-bit without DVD disk with HARD drive recovery option > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  Of course, this will not work if you didn't change the factory settings.
  Try if it will work for you.

  At the end I would say that what I wrote is detailed described in the document s user manuals but I presume that you didn t read it, right?