Tecra R840 - need help for installing the SSD
Hello
Sorry, again, but I really need help with that?
My new ssd (arriving in a few days) is a Plextor M5P which is 7 mm thick! My Tecra R840-16J have a thickness 9.5 mm HDD and what I've seen is no caddy!
I would be grateful all the tricks for installing the ssd drive in my Tecra!
Thanks for your time,
Paulo
Hello Paulo
As far as I know that some models are available with drive HARD and some with SSD these models with SSD have small SSD support. SSD is fixed by 4 screws in this medium.
I put t really know how to help you now. Maybe you should contact the nearest Toshiba service provider and ask for help. I think they can check the part number of this door - or maybe order one for you.
Tags: Toshiba
Similar Questions
-
Need help for installing the drivers on Satellite A80
Hello
I just reinstalled windows xp and have some problems to install my windows drivers. I lost my original cd and downloaded the drivers from your site. I followed the instructions but when I tried to find the driver for example the controller drivers network, windows can't find them. I placed them on my desk, so that shouldn't be the problem.I have a toshiba Satellite A80, with an nvidia card. If you would like more information just ask and i´ll try to give them, thank you for your effort
Greetz MexHello
The compatible network driver is placed on the page of Toshiba. I know, I checked the page.
More like in the post above suggested, you must decompress the folder of the driver first before you start the installation of the driver.What you should also know, is that the proper installation order is necessary. Installation instructions, you will find on the Toshiba site. Download this document and follow the guide line.
-
Need help to install the network on laptop drivers
I have a laptop of HP 2000-239WM and recently erased due to trying to sell. However, when I reinstalled everything back on the PC, no network drivers have been installed, so I have no access to the internet, wireless and wired. Should what programs I install via USB in order to solve this problem?
The network adapter driver specifically requests the Ethernet, wifi and it...
Hello McKinley,
Thank you for visiting Microsoft Community and we provide a detailed description of the issue.
According to the description, I understand that you need help to install the network drivers into the laptop.
Certainly, I understand your concern and will try my best to help you.
In order to install the NIC drivers in the system, I suggest to visit the link below and check if that helps.
http://support.HP.com/us-en/drivers/selfservice/HP-2000-200-notebook-PC-series/5091493/model/5119030
Note: Make sure you have access to the internet to another computer and download the network drivers using the USB and install on your laptop.
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
-
Hello, I need help for cancel the payment on my adobe account.
Hello, I need help for cancel the payment on my adobe account. I'm from Peru, Im paying a monthly fee as a student. Help, please...
-
need help to install the printer with cd rom
Hello, I need help to install a 3310 pphotosmart printer all in one. I don't have the cd ROM any help will be greatly appreicated.
Thank you
Hello
You can download the installer for your printer using the link below.
http://h10025.www1.HP.com/ewfrf/wc/product?product=439491&LC=en&cc=us&DLC=en&task=&lang=en&cc=us
Choose "Software and Driver Downloads", select your operating system, open "driver-product Installation Software" and then choose the option download Installer "Full Feature".
Kind regards
DP - K
-
Tecra R840 - need driver for the button control / stop Touchpad
Which driver supports the switch for the touchpad?
Hello
If you ask a software / driver, then you should also publish information on your installed system.
I assume that you have already installed the touchpad driver, in order to use the function keys, you need to install the VAP (value added package) as published by Liam -
Need help with installing the driver Vista for Satellite A200-23U
INSTALL THE
WINDOWS VISTA
N ° Version of the component name
1 Windows Vista RTM
2 native Intel ICH7M Chipset utility
3 945GM Intel display driver
or
3 nVIDIA Display Driver G72MV-A3/NB7P-GS
Realtek Audio driver ALC861D 4
5 Realtek 8101E 10/100 / Driver LAN Gigabit 8111
6 Synaptics Touch Pad Driver (with LuxPad)
7 ALPS Touch Pad Driver
8 card reader TI Multiple digital media
9 TOSHIBA software modem
10 Golan Intel Wireless LAN Driver
11 Kedron Intel Wireless LAN Driver
12 Atheros Wireless LAN Driver
Camera Chicony 13 software
14 Bluetooth Stack for Windows by Toshiba
15 Bluetooth monitor
16 TOSHIBA Value Added Package
17 TOSHIBA Flash Cards Support utility
TOSHIBA 18 hardware configuration utility
19 TOSHIBA supervisor password
20 TOSHIBA SD Memory utilities
21 TOSHIBA ConfigFree
22 TOSHIBA Assist
TOSHIBA Speech System 23
24 TOSHIBA Extended tiles for Mobility Center Windows V1.01
TOSHIBA Fingerprint Utility V5.6.0.3221 25But the [code] http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU&mode=allMachi nes & action = search & teddProduct = 738 & selShortMod = 532 [/ code] I don't know what connection is No2 chipset driver (I use vista 32 bit), similar what link is No3 display driver.
Can you help me to download 25 entry because I'm bad at computing :(
Sorry because of my English... THXHey Buddy
You have a machine with the ATI graphics card. Am I wrong?
If Yes, then the Chipset driver is ALREADY included in the ATI graphics driver that is available on the European driver Toshiba page!The order of installation displays the instructions step by step for all THE portable Satellite A200 PSAE6E but the fact is that devices were equipped with different material parts and that's why some single drivers do not appear or are not available.
Once again; Utility/driver chipset is available/included in the ATI graphics driver
Good bye
-
Need help to install the plug-in for WMP 12 chrome
Original title: wmp 12 plug-for chrome
can you please help me to install the right plug-in for wmp 12. My brouwser is chrome and I am running windows 7
Hello
I suggest to perform the steps in the following link and check:
Windows Media Player plug-in
http://support.Google.com/chrome/bin/answer.py?hl=en&answer=95697
NOTE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
See also:
Plug-ins for Windows Media Player
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins
Let us know if it helps.
-
I need help to install an SSD 120 GB on my IQ506
I got a new SSD 120 GB for Christmas and need help on the installation. I can't find a port hard drive or a Panel from anywhere. Should I for this apart? I have preconfigured my hard drive before implementing? I also have a new Windows 7 Home Premium to install if it will work.
Sorry for all the questions, but the search was not helpful to me.
-= Mark =-
If you go to your support page, click on product information. Specifications of the product, and then click product specifications""(name of PC). " Scroll down to hard drive and expand it, make sure that the details of your new hard drive match the details on the page.
This is the page for replacing hard drive for HP Touchsmart PC:
-
Recently, I bought this computer used from a large company. They have removed the hard drive, but left intact the rest of the computer. I put in a new hard drive and installed Windows 7 on the computer. My problem now is that I need to install the drivers for the computer, because it has nothing installed. I went to the site to download driver HP and they have only drivers for windows 8.1. I always used my other computer to download the driver and a flash used to install on my computer drive. It would not install as it is the wrong operating system. How can I install drivers on the computer? Help, please. Thank you.
Hello:
See if some of the W7 x 64 drivers of this model works on your. Do not use the BIOS or firmware files.
It has a similar hardware configuration but not exactly the same.
Let me know what devices are left there's drivers.
-
I am trying to install a Trend Titanium Antivirus software, but I need to install my Windows Vista system updates before doing so. The error code is "WindowsUpdate_800F080D" "WindowsUpdate_dt000" How to f
Hello
. What is the KB updates failed to install numbers?
You can follow the suggestions mentioned below and check with the question.
Method 1:
You must perform the clean boot in order to prevent any third party conflicting application to interfere with the computer and try to install the updates pending.
To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.
If you are still having the same problem, follow the next method.
Method 2:
Download and install the updates manually:
a. Please visit the Microsoft Download Center: http://www.microsoft.com/downloads
b. use the ID number of the update to find the download link.
c. click the link on the search results page. Then opens the update download page.
d. download the update and save it to the desktop.
Double-click the downloaded file to start the installation and check with the question.
If you are still having the same problem, follow the next method.
Method 3:
The problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
If you are still having the same problem, follow the next method.
Method 4:
System tool update that corrects problems of Windows Update is available for Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008:
http://support.Microsoft.com/kb/947821
I hope this helps!
-
Need help for installing windows 7.
My first question is, do I know why you guys have stopped providing the dvd of the OS?
My HP laptop comes with windows 7 home basic 64-bit installed.
Then, after a few months, I had a virus attack, but given that you guys did not provide the DVD of Windows 7, I couldn't format my system.
So I used the recovery disks, to restore my laptop to its factory condition. He did erase all data but it has NOT delete the virus which was still present and was perfectly visible on the C drive.
Later that night, I was working on my word document when all of a sudden my system hung, the keboard stopped responding, the Start button was not working and I was in a complete mess. If the recovery disks proved to be pretty useless when it comes to format a system when it is be a virus attack.
So the next day, I had no other choice but to call the tech guy and I told him to format my system, by removing all my partitions, drivers and even the recovery partition, as I didn't have a single trace of virus to stay in any partition of my system.
So it formatted my laptop and instead of basic family win7, it installed win7 ultimate.After he was gone, I had problems with the drivers.
And since all of my original drivers are already there in my recovery discs, I felt the need to create another backup for these drivers.This is so a few question-
question 1 - do you think I can use the recovery disk to install all the original drivers on my laptop which is running win7 ultimate.
The drivers will support the final version of win7 or it will support Home Basic version only?2nd question - when using recovery discs to install the drivers, it will also install 'Home Basic' on the 'ultimate' version currently installed?
Please help me. Im very confused.
If only you guys had provided a DVD win7 when buying laptops or you could have at least provide a download link for home base ISO, then I could have formatted my system myself instead of call the tech guys and spending money on them :(Using the recovery software partition will remove Windows 7 Ultimate. If you still have your product key for ultimate, you can use it to upgrade. But if the technology installed Ultimate I can tell you for certain if the key he used to work.
The Recovery Manager does all the work regarding the management of partition, no action is required on your part, except where expressly invited to do so.
You need to create your own homepage basic DVD, see this post by Andre Da Costa: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/when-can-i-download-the-windows-7-home-basic-iso/39eac399-3a12-46ed-91f4-93a300126e43
J W Stuart: http://www.pagestart.com
-
L20-120: need help for installing Windows XP
I recently bought a laptop Toshiba L20-120 with the operating system of Windows XP in German but would like to install the English version. I need help on how to on this subject. I have Windows XP 2002 edition, is this compatible or that we should install? Some help me please as soon as POSSIBLE.
Hello
If you want to have the Windows operating system in English, therefore install the Windows in English form the original CD of Microsoft.
All English Toshiba drivers you will find on the page of the Toshiba driver which you will find under this link:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp -
Need help to install the driver Intel Lan on a Satellite A100-011
I bought Toshiba Satellite A100-011 with Windows Vista laptop. Now, I went down the operating system to Windows XP. The problem is how to install the Intel Lan driver. I would really appreciate any help, because there is no .exe file and I have no idea what to do with these files.
Hey Buddy,
the files that are in the zip file are really drivers, but you must install them manually which means you have to go into the Device Manager, look for the LAN device which should probably have an exclamation point and then right-click on it. After clicking on a wizard should appear which brings us to you trough the installation process. When the wizard application for pilots (if not found already automatically), and then point to the folder where the driver files.
Then, everything should be good. :)
Greetings
-
Need help to install the printer
I would like to get help on the installation of my printer...
* original title - HELP printer installation *.
Hello
· What is the number and model of the printer?
Check the user manual for the steps on how to install the printer.
You can also follow the below listed as follows:
a. Click Start, click Control Panel, click Printers and other devices and then click Printers and faxes.
b. double-click Add printer to start the Add Printer Wizard and then click Next.
c. Select Add a local printer.
d. on the page choose a printer port, make sure that use an existing port option button and the recommended printer port are selected, and then click Next.
e. on the installation of the printer driver page, select the model and manufacturer of the printer and then click Next.
See: resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028
Maybe you are looking for
-
Hello I do panic the kernel experience every 2 hours for a week. No new hardware, no third party RAM, all the updates that are made. Here are the logs from the panic, it is possible to identify the cause? Thanks for your help Laurent Tue Jul 12 09:52
-
How to unlock (HUMINT-alt-end) on Apple MAC
Some of our customers use MAC connector to connect to our vWorkspace VDI environment. A screen saver that locks the screen after a few minutes, we have the installation program. On a windows PC, the user can press CTRL-ALT-END to unlock the screen. H
-
HP Pavilion n208tx: upgrade of the operating system using Win 8.1 Pro and pilot
Hello I have n208tx with nvidia 740 m. I recently upgraded my OS to Win 8.1 Pro with a clean and then installed installation graphics drivers available on the site but all games or software I recognize that "Microsoft base Render driver." I don't hav
-
LaserJet M1132 - scan not possible when it is connected to the USB of TimeCapsule airport port
Hello I'm on Mac OS X Lion 10.7.4 Installed the latest drivers to date: 1.2 The multifunction printer is pluged on a TimeCapsule 7.6.1 Printing works fine. But scanning is not possible using "HP Director" and with a brand like HP, I expect to have dr
-
does anyone have any ideas on how to get my windows 8 out of safe mode and online? Thank you