Need help in RegEx - rule Translation simple voice

Similar Questions

• Please - need help changing the rules to exclude certain hosts/guests

  I need to find a way to exclude certain hosts and invited only a few rules, and I can't seem to understand.  Here is my example.

  I have a guest who I want to disable monitoring of the 'Memory of Virtual Machine of VMW Swapping' State.  The guest I want to exclude the rule is called "ucapmil1 (QAUCL).

  So I in the field field of application of this particular rule rule:

  "VMWVirtualMachineMemory where virtualMachine.name does not correspond to ' ucapmil1 (QAUCL)"

  I also tried

  VMWVirtualMachineMemory where monitoredHost.name! = 'ucapmil1 (QAUCL).

  Neither seems to make a difference.  Can someone point me in the right direction?  Thanks in advance.

  Try using esxServer.name

• Need help with Regex

  Still trying to solve a problem in Dreamweaver - and think that using Regex is the way to go - but never used

  I have 2 tables over 4000 pages and remove 1 table on each page, but they have different links and content etc.

  The 2 tables on each page are also distinguished by different table widths

  If the table I want to delete resembles this example below - should what Regex I use to do search and replace only remove the table with < table width = 100% >

  < table width = "100%" > < tr > < td > < a href = "aberley.htm" > < font size = "-7" > aberley < / font > < /a > < table > < /tr > < / table > ' "

  Thank you very much

  As Randy said, Reg Ex probably isn't what you need here.  Use find & replace special tags.

  If I understand you, you want to remove the following 4,000 pages.

  
  
  
  
  

  some content

  Make a copy of your site as a back-up.  You can't cancel it.

  SEARCH FOR REPLACEMENT &

  Find: entire Local site

  Research: Table of specific tag

  + - With the attribute width = 100%

  Action: Remove tag & content

  Replace all

  Good luck

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Need help - new flash - button submit Simple script

  Hi all

  New to the world of flash. I'm sure it's simple, but I am unable to understand.

  The script:

  mySubmit.onRelease = function() {}
  mymail = "[email protected]";
  userName = name_txt.text;
  userEmail = email_txt.text;
  userMessage = body_txt.text;
  If (_root.userName == "" | == userEmail ' ' | userMessage == "") {}
  _root.body_txt. Text = "Please enter the correct information."
  } else {}
  getURL ("mailTo:" myEmail"? subject = Messageof:"+"name of user + with the Email address:" + userEmail + ", & body ="+ body_txt.text);
  }

  The error:

  (* Error * = 67 exemplary symbol symbol No. 4, layer = Layer 6, setting 1:Line = 9: ')' or ',' EXPECTED
  getURL ("mailTo:" myEmail"? subject = Messageof:"+"name of user + with the Email address:" + userEmail + ", & body ="+ body_txt.text);

  Total ActionScript errors: 1 reported errors: 1

  Can someone give me an idea as to where this elusive comma should be or must be in brackets?

  Thank you.

  Change the getURL for:

  getURL ("mailTo:"+ myEmail +"? subject = Message % 20from: % 20" + userName + "% 20Avec % 20The % 20% 20 a ddress%20of:%20"+userEmail+"&body="+body_txt.text);

  The problem is that you forgot to put the symbol of the concatenation in the mymail variable.

  The other thing I changed I was urlencoded string subject (each %20 is a space) - this will eliminate problems in other places.

• Need help with a simple basketball game.

  Hi im new here and I need help with what makes this simple basketball game.

  Im trying to recreate this this video game. I'm not sure if it uses as2 or as3
  

  If someone could help me make a game like this or point me to a link on how to do it would be greatly appreciated.

  AS2 is used in the video.  If you have other issues, please post in the forum AS1/AS2.

• Need help to translate this into a request

  Need help to translate this into a request. I can make the followingusing a query?

  I have the data in this way and I want a report in one line.

  The available data as follows by joining 2-3 tables:

  er_id er_name carrier account records
  ------------------------------------------------------------
  1           XYZ           AT&T                     2
  1 XYZ Sprint 4
  1 Verizon Wireless XYZ 7
  XYZ T-Mobile 1 1
  2 AAA AT & T 18
  2 AAA Sprint 2
  2 AAA Sprint (Nextel) 1
  2 AAA T-Mobile 1

  Need the output in this format:

  ER_ID ER_NAME at & T, Sprint (Nextel) Sprint, Verizon Wireless, T-Mobile
  --------------------------------------------------------------------------------------------------------------------------
  1            XYZ               2            4                   0                                  7                            1
  2            AAA             18            2                   1                                  0                            1

  Is this possible with a simple query?

  It's called pivot. Assuming that you are on11g and AT & T, Sprint, Verizon Wireless and Sprint (Nextel), T-Mobile is a complete list of carriers:

  SET DEFINE OFF

  () AS T

  SELECT 1 ER_ID, ER_NAME "XYZ", "AT & T" COMPANY, NTC 2 UNION DOUBLE ALL THE

  SELECT 1, 'XYZ","Sprint", 4 DOUBLE UNION ALL

  SELECT 1, 'XYZ', "Verizon Wireless", 7 DOUBLE UNION ALL

  SELECT 1, 'XYZ', 't-Mobile', 1 DOUBLE UNION ALL

  SELECT 2, 'AAA', 'AT & T', 18 DOUBLE UNION ALL

  SELECT 2, 'AAA', 'Sprint', 2 DOUBLE UNION ALL

  SELECT 2, 'AAA', 'Sprint (Nextel)", 1 DOUBLE UNION ALL

  SELECT 2, 'AAA', 't-Mobile', 1 DOUBLE

  )

  SELECT ER_ID,

  ER_NAME,

  "" AT & T"_CNT" "AT & T"

  "" Sprint"_CNT" "Sprint."

  "" Sprint (Nextel)"_CNT" "Sprint (Nextel).

  "' T-Mobile"_CNT ""T-Mobile"

  ""Verizon Wireless"_CNT" "Verizon Wireless".

  T

  PIVOT)

  SUM (NTC) NTC

  Carriers to ("AT & T", "Sprint", "Sprint (Nextel)", "t-Mobile","Verizon Wireless)

  )

  /

  ER_ID ER_ AT & T Sprint Sprint (Nextel) T-Mobile Verizon Wireless
  ---------- --- ---------- ---------- --------------- ---------- ----------------
  1 XYZ          2          4                          1                7
  2 AAA         18          2               1          1

  Scott@pdb1orcl12 >

  Sy.

• [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

  [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

  I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

  Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

  I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.

• Need help to set up voice VLAN in SG300

  Hello

  I spent too much time on it now and need help. I'm trying to set up a voice switch VLAN on a SG300 - 28 p. I need to charge a phone Cisco 7965 connected to a port on SG300 - 28 p to use VLAN 100, and a workstation connected to the phone to use Cisco 7965 on VLAN 101 by SG300 - 28 p. In the common Cisco IOS switches, this task is configured as follows:

  interface gi25

  switchport mode access

  switchport access vlan 101

  switchport voice vlan 100

  Trying to achieve this scenario with a Cisco SG300 switch turns into a nightmare. You will have to deal with a Dynamic of VLAN voice Auto Voice VLAN mode. Then, you must have a configured trigger and activated Automatic Smartport . I tried to do this in CLI nothing helps. Cisco 7965 receives an IP address of the access VLAN on Gi15 interface, which is 101 VLAN. I need to receive an address IP of the VLAN 100.

  The current configuration under Gi15 interface is as follows:

  interface gigabitethernet15

  activate the storm control

  broadcast storm control level kbit/s 10

  Storm-control include multicast

  port security throw trap 60

  maximum port security by 10 points

  port security mode max-addresses

  spanning tree portfast

  LLDP-med disable

  switchport mode access

  switchport access vlan 101

  ! next order is internal

  macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100

  Now, I don't know how the macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100 command in the config, and I do not know how to remove it.

  When I try to enter the command macro auto smartport type ip_phone_desktop under Gi15 interface, I get the following error message:

  The $voice_vlan macro setting is not configurable by the user

  It seems that the auto attendant smartport macro ip_phone_desktop can not apply the setting $voice_vlan with a value of 100. In fact, I explicitly does not use this parameter to everything in the order of macro auto smartport type ip_phone_desktop ; However, the SG300 switch knows that the voice VLAN VLAN 100, and he's trying to use this VLAN ID as the value of the $voice_vlan parameter, the macro fails.
  

  I tried statically configure the voice VLAN on the switch SG300 using the command id of the vlan 100 voice , but I couldn't get the ip_phone_desktop macro to configure interface Gi15 correctly. Then, I removed the command id of the vlan 100 voice and obtained SG300 to learn his voice VLAN ID of UC560 connected to the SG300 through a trunk port based on the port configuration (connected to SG300) for the trunk of the next UC560:

  switchport trunk vlan 101 native

  switchport mode trunk

  switchport voice vlan 100

  Cisco-switch macro description

  This is the command switchport voice vlan 100 who announces to SG300 via CDP VLAN 100 is a voice VLAN. When I run the command show vlan local VoIP on the SG300, I get the following result:

  VLAN ID - VPT DSCP Source MAC address Interface

  1                    5          46       default           ----                    ---

  * 100 CDP e0:5f:b9:xx:yy:zz gi28

  Thus, it is clear that the SG300 receives information from UC560 via CDP in port Gi28 VLAN 100 is the voice VLAN. However, I can not always apply the ip_phone_desktop macro to SG300 Gi15 interface.

  Also, I tried to set up vState ofoithis vlan auto-déclenché as well as the commands in global configuration State vlan automatic voice activated mode. Or setting changes anything view voice VLAN announced at Cisco 7965 where Cisco 7965 continues to use VLAN101 (access the VLAN assigned to the interface Gi15).

  Hello telecastle,

  The Macro just get in the way most of the time. A default state on the switch a user will set the id of the vlan voice with orders

  (config) #voice vlan id 100

  * This will create the vlan 100

  VLAN, VoIP? * You can use to change your defaults for dscp and cos a long with all the other settings.

  State of vlan (config) enabled automatic #voice

  (config) #interface rank fa1-24

  (config-if-range) #switchport trunk vlan 101 native

  trunk (config-if-range) #switchport allowed vlan add 100

  * This function will define the vlan native on the trunk to 101 for the data port and vlan tagged will be 101 for the voice.

  CDP is enabled automatically and should learn the features of the phone and get on the phone to the vlan 101 on this port.

  CDP of the UC should automatically fill in the switch of the SG. You may need to upgrade the switch to the latest firmware however. Also make sure that the DHCP server for the voice if the CPU must be configured accordingly.

  Let me know if this helps.

  Cisco Small Business Support Center

  Randy Manthey

  CCNA, CCNA - security

• Hello, I need help.  in photoshop / editing / color / color / RGB management rules, it is impossible to change this point. Is in the "off" position and I would choose "preserve embedded profiles' I'm on windows 8 and creative cloud for photoshop.

  Hello, I need help. in photoshop / editing / color / color / RGB management rules, it is impossible to change this point. Is in the "off" position and I would choose "preserve embedded profiles' I'm on windows 8 and creative cloud for photoshop.

  Policies automatically goes to "off" If you have your screen as working RGB profile - what is something that you should never do. Always have a standard space like RGB work.

  And Yes, "preserve embedded profiles" is the only sensitive parameter. Others are best for special purposes where you really know what you are doing - at worst they will transform your archive in a unrecoverable mess.

  

• Hello, I'm testing creative cloud, I really need help to know which module to install to create simple web pages

  Hello, I'm testing creative cloud, I really need help to know which module to install to create simple web pages

  Hi Cyril,.

  It depends on what you want to do. If you have experience with coding, you can download Dreamweaver to create Web sites by using the two code + design of knowledge.

  With Muse, you can design beautiful Web pages and Muse will generate the code for you.

  I hope this helps!

  -Emily

• New to Adobe Flash, need help with a simple coding

  I'm new using Adobe Flash and need help. That means class static type?

  static text is entered in the authoring environment.  This is the text that will not change (that's why static) during execution.

  This is in contrast to the dynamic text, which is text that is assigned using actionscript and can change at any time actionscript runs.

• Need help with simple flash keys

  So I need help either direct tutorial or someone to point me in the direction of something useful.

  What I'm trying to do, is create 3 clickable flash buttons which all have a link to a small box. I want these buttons to make the text appear in the box when clicked. I want the box to be a Virgin until a button is clicked.

  EXAMPLE OF

  _______________
  | TEXT HERE |
  |                          |
  |_______________|
  ___     ___     ___
  |__|     |__|     |___|

  Thank you very much in advance.

  Strike what I said about the code being fine.  It is not (my eyes just woke up).  This is a correct coding for the way you had it.  To have the button share the same function of handler you need another approach that tests for which the button is clicked.  Instead of this approach, below I show each button has its own manager function...

  Stop();
  BTN1.addEventListener (MouseEvent.Click, mouseClick1);
  function mouseClick1(event:MouseEvent):void
  {
  gotoAndStop (2);
  }

  Btn2.addEventListener (MouseEvent.Click, mouseClick2);

  function mouseClick2(event:MouseEvent):void
  {
  gotoAndStop (3);
  }

  BTN3.addEventListener (MouseEvent.Click, mouseClick3);

  function mouseClick3(event:MouseEvent):void
  {
  gotoAndStop (4);
  }

• Need help with the lettering complex

  

  Well, I try not to ask questions on this forum without trying things myself. I understand the time of other people very important. In any case, I took a class at a technical college and have a home classroom course that I'm doing right now. Unfortunately, at this time I need assistance. This logo needs to be recreated for vector art because it will be printed on a very large substrate. The customer has no access to vector art.

  I need help... I'm very proficient with the basic tools, the pen tool including. However, create complex lettering like that, I don't have a lot of experience with.

  The lettering is so my * right now. Also, I can imitate the gradient for bars decently, but get with the little rounded in angle gradient effect.

  I do not beg for help, but I might help! ?? I'm not looking for someone to do the work, rather to provide advice, so I can go my way through this. The customer contacted my boss today and he needs Monday for a meeting, so I'll have a project to do over the weekend.

  To print the black spot. Any advice/suggestions will be greatly appreciated. After work tonight, I'll go in my classroom in a book to pick up useful tips.

  Thank you all,

  Andrew

  There are many stylistic variations of this sort of thing. Your screenshot is too low to discern the exact treatment used for sure. Who says:

  This takes about 5 minutes and translates into a clean and economic construction with a minimum of access roads.

  That color is black spot.

  Two shades: Spot black and 20% tint of black spot.

  All paths shift (the inner paths of all the characters) are a single compound path and receive a fill of three-stop linear grad at 0 degrees.

  All original paths (paths outside of all the characters) remain separated and a three-stop linear grad to 120 degrees fill is applied (so each external character has its own grad which can be set individually).

  

  Small individual adjustment of the grads on each external character can match very closely the layout of tones of bevel of the original that you are trying to imitate. Keep things simple. Consider shading Emboss edges carefully and try to see them as linear graduates extending on the entire character and not as a pile small tedious individual details of packaging around the character. Then do shading with grad stops as little as possible. Understand how to "shake" or "refine" travel between the grad stops moving the gamma pointers that lie between each pair of grad adjacent stop biased towards a stop or another. More transitions - particularly on bevel veneers - the most 'sparkle '.

  JET

• Several uses for the final product, need help with Render &amp; output parameters

  Aloha, this is my 1st time in this forum... posted this question in Premier Pro and has been mentioned here.

  I created an effect straight project. I want to make four 4 very specific uses.  Unfortunately, I don't know anything about these formats to be given options in AE - CS4.  One of the many 'rendering settings' and 'output module' settings 'make model '.  This seems the best option for me given my future use: 1) for the DVD; (2) for electronic mail; (3) for YouTube. (4) my web site.  I read and reread the rendering and export options in the manual of use-AE CS4 without success in understanding what each option should be used for.  I need help in the translation of pixelpicker-talk.

  Can someone help me about these accurate "rendering settings" and "output module" parameters listed in AE in the option "make and model"?

  Thanks a lot... come visit the watrer is warm and clear as always.

  KonaDon

  I understand - I think the article using After Effects is a very complete resource, explaining the various features and their purposes. But the real world is full of special cases that are very difficult to address in a manual. In addition, it is a moving target. Different best options today probably the best choice, next year.

  Let's see if we can help here:

  1-. DVD: on the technical side, it is always MPEG-2. A very specific taste of MPEG-2. But while After Effects will let you export a file of this type (choosing the MPEG - 2 DVD is predefined in the output Module), it is also true that most of the applications (such as Adobe Encore DVD) DVD authoring are very friendly in terms of letting you wear one (ideally, uncompressed) Quicktime or AVI (which in no way is compatible DVD) and do the encoding in MPEG-2 for you. So it is up to you: you can encode EI using the preset DVD MPEG-2, or you can use an application of coding specialized (such as Adobe Media Encoder in stand-alone mode) or simply let the DVD authoring application do the encoding for you. This should be very simple and in this case, you can simply render a Quicktime or AVI file without loss (there is a model of output Module called "Lossless" who will take care of everything. You can use the default value, the 'best' model to make settings in most cases).

  2-. E-mail: on the one hand, you need something that is really light and as good quality as possible. In the other, you want something universal compatibility, which can be read in all or almost all computers. H264 (advanced version of MPEG-4) format is really good in terms of efficiency, but its ' adoption is perhaps not as widespread yet. Flash Video (FLV) is really good in this regard. In this case, you could choose Adobe Flash Video (FLV) as the format in the output Module and then choose preset FLV 'Flash 8 web small' for this purpose.

  3 YouTube: it's not that simple. The ideal format for YouTube is not quite exist, they insist on the re-encoding each file that you download, even if your file is technically identical in every way to their versions. So what you want here is something that looks good and it isn't huge to download. This all spells 'H264', in my opinion. The details depend on the question of if your Composition is HD or SD, 4:3 or 16:9, etc. Strange as it may seem, the big "iPod" preset for the format H264 is a good starting point. You can customize it to increase the speed of transmission a little (maybe 2 or 2.5 Mbps, against 1.5 Mbps).

  4 website: even once, you need something that most people already have in their computers. Flash Video is an excellent choice, since about 98 percent of users have the Flash plugin. But in this case, you can have more great heights and flow rates, so you can use the "Flash 8 big' defined by default as a starting point. Once the Flash 10 plugin (which now supports the H264 in addition FLV) spreads in the future, you could standardize on H264 in a delivery format, with different settings for each type of destination.

  I hope this helps.

• In fact, I need help but can't find the answer. Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as

  In fact, I need help but can't find the answer.
  Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as empty as when I open Firefox, it automatically load my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
  Thank you.

  [Personal information deleted by the moderator. Please read the guidelines and rules of the Forum, thank you.]

  Hello, please refer to customize the page new tab to turn off the function.