Need help, Microsoft Fix it does not help. Running Win. XP Pro 2002 SP 3. I have already installed the "difficulty" to play videos

Similar Questions

• need drivers pci for toshiba satellite M45-S2653 running windows xp pro 2002 SP2

  need drivers pci for toshiba satellite M45-S2653 running windows xp pro 2002 SP2

  Find it here:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=product%20Support

  Good luck.

• Microsoft 'Fix it' will not download/run/save

  Hello

  Microsoft 'Fix it' will not download, Vista SP1 32, running with the Defender, basics of security, AVG 9. and Win firewall. I added the site as exceptions on IE etc, but I can't get the .exe to others... BECAUSE IT WON'T SAVE TO THE OFFICE OR TO RUN!

  Help please

  Hello

  You shouldn't run MSE with a complete other antivirus. And Defender is disabled by MSE as it does
  the same function for spyware and antivirus adds.

  What Fix - it you try to run? What is the problem?

  AVG is probably the primary cause. I would uninstall it by using the removal tool or Special Instructions
  from their site - AVG 9 is causing many questions. Usually best to disable as much as possible before
  the abduction. Also download but do not install the replacements until after the deletion is completed
  and a reboot. Use the method below to all in the right order.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN

  AVG removal tool
  http://www.Avg.com/us-en/download-tools

  -------------------------------------------------

  Here's what I use and recommend:

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
  Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  ================================

  Your router may need a firmware update, but that would probably not produce
  bluescreens. And the rest can be processed after that AVG is out of the picture.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I had no idea that I needed to use a CD to download my Adobe Photoshop elements 12 on my MAC and have already registered the product; Now, how can I download it? I tried to develop on the web and no luck! Please help me!

  I had no idea that I needed to use a CD to download my Adobe Photoshop elements 12 on my desktop MAC and have already registered the product; Now, how can I download it? I tried searching on the web and no luck. Please help me!

  You don't need a CD to download anything; just download & install the trial version of http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements, and then activate it with your serial number.

• Microsoft Fix It does not "Windows Script Host gave me the error message: cannot find engine\ 'VBScript' Script script.

  installed Microsoft Fix It.  When I try to launch it I get the message that there is an error during the MicroFix troubleshooting it won't work.  I can only use the online version.

  I had a problem installing a program and products purchased for the program.  Windows Script Host gave me the error message: cannot find engine\ script 'VBScript' Script 'C:\Users\debra\AppData\roaming\MyEQBoutique\Boutique Registry Entries.vbs.  I uninstalled the program.  I ran the SCF.  Ran the clean boot, and then set back to normal. I restored to the previous day.  I ran the scan online to remove malicious whatevers, also, I went and changed all my default settings.  Windows tells me that it is up-to-date.  I have Windows Vista Home Premium, I use Microsoft defender and Microsoft Security Essentials.  What is going on? What can I do else?

  Hello

  (1) have you made changes before the start of this issue?

  (2) have what program you tried to install?

  (3) you are able to install any other software on your computer?

  (4) what fix - it you try to run?

  This occurs if the filevbscript.dll runtime script is not properly registered in the system.

  Try the steps below and check if you are able to run the Microsoft fixit.

  a. click the Start button, type cmd. In the result of the research with the right button on cmd and select run as administrator.

  b. type cd %windir%\system 32 (Note: there is a space between the system and 32) and press ENTER.

  c. type regsvr32 vbscript.dll in the command prompt, and then press ENTER.

  d. type regsvr32 jscript.dll in command prompt, and then press ENTER.

  If the registration was successful, you should now see the following message is displayed:

  DllRegisterServer in vbscript.dll successful.

  e. now, try to run the Microsoft fixit.

  See also:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  After the question in the following forum if the problem with fix - it persists.

  http://social.Microsoft.com/forums/is/fixitcenter/threads

  Let us know if that helps.

• kb310441 microsoft fixed it does not remove the old username of the process after removing the name of the pc.

  Microsoft fixed that it does not remove the name process after removing the name of the pc. How to make an old username of the process?

  Fix, he changed the name and organization... just not their process attached like taskmanager, explorer.exe, iexplore.exe, wuauclt.exe, and much more.

  Thank you

  Charlie

  Hi charlezim,

  Target article does not username, but the information stored on the computer.

  If you want to change user names, you must create a new user account.

  How to create and configure user accounts in Windows XP

• Microsoft Fix It does not work

  Hello

  I am having some problems with my operating system. I decided to run the Microsoft Fix it Automated Troubleshooting Services. I ran the installer and then he "Windows PowerShell is required before continuing. He gave me 2 options 'Install Windows PowerShell 1.0' or 'ignore this installation and Microsoft Fix it diagnosis.' I clicked on install PowerShell. Then the install box froze (not responding) and then he returned to normal with 2 options. Its like I never clicked on anything whatsoever. So I clicked on install PowerShell again, but it still has the same, would not do something.

  How to run the program?

  Windows Vista Edition Home Premium

  Thanks anyway,

  Maybe I should get the Service Pack 1.

  Windows Vista Edition Home Premium

  Maybe not. You must. Download the 1 and 2.

  Excerpt: The Support for Windows Vista without service pack will end on April 13, 2010.
  source of information: http://www.microsoft.com/windows/windows-vista/default.aspx

  t-4-2

• Fan of Satellite U500 - 11 c sometimes does not start running Win 7 64 bit

  Hello

  I have two Toshiba Satellite U500 - 11 c on Windows 7 Home Premium 64-bit. Sometimes, after a new start of Windows, the fans start and just run a few seconds sometimes. When this occurs, the CPU temperature gets very hot (do not know exactly how much). I found a way to return to a behavious normal just unplug the power cable and reconnect it just a second or two after.

  Two laptop computers have the latest Bios and drivers of Toshiba. Somehow, it's the same behavious as under Linux.

  With these experiences, I just thought that Toshiba laptop are not well properly handle ACPI Fans and tempartures. Is it really inevitable?

  I hope that this feedback can help...

  Hi mate

  Cooling modules are controlled by the fan which is stored in the BIOS table.
  Fan table contains details and information when and how fast a fans should run.

  Besides computers laptop Toshiba supports protection against overheating. This protection monitors the temperature, and if the temperature is too high, the laptop turns off automatically.

  If the laptop does not turn off automatically then I suppose that the temperature is not too high

• Microphone does not work with Win 8 Pro (driver issue)

  I just bought a new PC with Windows 8 pro and the following technical details:

  Motherboard: GA - X 79 - UP4
  CPU: Intel I7 - 3930K
  Graphics card: Nvidea Geforce GTX670

  The Microphone plugged into the port back does not work and produces his scrambled a lot like a warped computer extreme voices and is extremely soft at the same time. Re-install the original drivers and try to obtain new did not help anything.

  To prove any wrong material, I then removed the hardrive where victory 8 has been installed and installed a new version of Windows 7 Ultimate on a new hardrive and here evrything works without any worries. Probably, this proves that it is certainly a driver problem.
  Also, what about this is that Windows 8 has crashed several times already by activating the "speaker" icon.

  Any help would be apreashiated

  I actually solved the problem by updating the bios of the motherboard that was sugested to me by the Gigabyte support.

  Thank you

• flashplayer18_ha_install.exe does not work on Win XP Pro SP3

  File 'flashplayer18_ha_install.exe' of the update causes error during execution.

  Adobe Download Manager has encountered a problem and needs to close...

  (Signature of error = AppName: flashplayer18_ha_install.exe)

  AppVer: 1.5.0.35

  ModName: flashplayer18_ha_install.exe

  ModVer: 1.5.0.35

  Offset: 000059db)

  The file "flashplayer18_ha_install.exe" = file version: 1.5.0.35s

  Installation file "install_flash_player.exe" works OK, but seems to install the same version outdated; 18.0.0.194.

  OS = MS Windows XP Pro SP3. 32 bits; Processor core

  Browser = Firefox 39.0

  Flash Player plugin version 18.0.0.194

  Hi klm2048,

  Setup Online does not work on some XP systems.  Investigation on the Installer team online.  In the meantime, please use the installer in offline mode, posted at the bottom of the problems Installation | Flash Player | Windows page in the section "problems".

  --

  Maria

• vmnetcfg does not work on Win 7 Pro 64 bit host

  Hi, I am trying to configure my Ubuntu 10.04 guest to deck 1 to my adapter network card on the host computer's wireless and fill one for my host's ethernet card, but I am unable to run vmnetcfg on my Windows 7 Pro 64-bit host.

  I downloaded VMware-player - 3.1.2 - 301548.exe the site of vmware yesterday and checked out vmnetcfg.exe of network.cab as described in many places on the web, place it in the VMware Player directory and ran it.  She ran in the background for a few seconds, then closed.  It does not open the window of GUI at all, but the mouse pointer change to the working in background pointer for a few seconds, and vmnetcfg.exe appears in the list of processes in the Windows Task Manager.

  At first I thought that maybe there was a conflict between slightly different versions, so I uninstalled VMware player (maybe v3.1.1) and reinstalled with the new configuration file, that I had just downloaded.  After you have copied vmnetcfg in the VMware Player directory, it still didn't work.  Same symptoms.

  The configuration that I'm trying to achieve is seems to be simple if I can't get vmnetcfg to work.  If anyone has experienced this problem or have any suggestions on how to fix it?

  Thank you

  Jim

  Tip:
  Uninstall VMplayer - download Workstation 7.0.1 instead and use without a license.

  Same functionality as VMplayer but then essential tools like vmnetcfg.exe or vmware-vdiskmanager are installed properly

• My browser does not work and I can't close it to reinstall. I installed the updates and now I have this problem.

  I put the security update, and now my browser does not work. I have a white screen which is partly black and I can not close even to uninstall and reinstall. What should I do?

  Yes, confirm this answer of philipp is correct for this problem, the problem is the graphics card intel hd3000 with an old driver current, the easy way is to disable hardware acceleration,... to be honest... I think that workaround and lose all the benefits of hardware acceleration.

  Thank you

• I'm trying to open an a 810 nikon raw file but does not open. said gross can't camera model. I have re installed nx2 with erroe u43m1d207. How to open raw files?

  I'm tryng to open an a 810 Nikon raw file, but does not open. Said GROSS CAN'T camera MODEL.  I have re installed nx2 with error code u43m1d207. How to open a file.

  You can use the dng converter if update your adobe programs fails.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.7

• I have a memorex drive that used to be U3, it does not connect to win 7 Pro flash.

  I have a memorex drive that used to be U3, it works with my XP machine and also in the Win 7 Pro 32 of this machine little but not in the 64 bits in the same machine (dual boot) flash. He works in a new machine to Win 7 Home premium 64-bit. What happens when it is plugged, it's that a connected sound appears the autorunwindow then disconnects and emits a sound then chirps connected twice more. It is not at all connected. Any ideas as to why it tries to install the second and third time. Obviously, the drive is very good and has been formatted several times. Installation of 64-bit problem is a new installation and other discs fine flsh.

  U3 system was owned by Sandisk and they discontinued it.  You can find the method of removing the U3 and re - format @ u3.sandisk.com

• Windows Update does not work on Win 7 Pro X220T

  I'm updating with Windows Update.  When I click on control of updates, I get the following error message:

  "The Windows Update cannot currently check for updates, because the service is not running."  You may have to restart your computer. »

  Several reboots do nothing.  Enter the watch Services that Udate Windows is launched and running.

  It has been like this for several weeks.  Any suggestions on how to fix this?  TIA!

  I found a simple solution on the Microsoft Web site.  It is apparently a common problem.

  Solution is to delete the content of the C:\windows\SofwareDistribution folder and restart.  Widows Update works now, although he will respond as if Windows has never been updated.

  Apparently, something in this folder is corrupted.