Computer Windows 7 cannot access the files on computer Vista but Vista is started the last. Both lasted upgrades of the operating system.

Similar Questions

• Cannot find the operating system files

  Cannot find the operating system files after system, Windows 7 error Ox490 HP Pavilion e9150t recovery

  Thank you very much I'll check on that.  Ended up doing a restore of the original.  Painful but successful.

• What support VMware Windows 7 as a guest host and Windows Server 2003 as the operating system operating system?

  People,

  Hello.

  Because my laptop is preinstalled Windows 7 and cannot dual boot multiple operating systems. I need to install VMware in Windows 7 host and then install Windows Server 2003 as a guest operating system.

  I installed VMware Server 2.0.2 in Windows 7 and Windows Server 2003 operating system as a guest host. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333 / IU cannot display more.

  I found that Windows 7 is not a host for VMware Server 2 and strange operating system might happen at any time. I found that 'VMware Player 3' is fully supported in Windows 7 as host operating system but is not taken in charge of Windows Server 2003 as a guest operating system.

  People knows what product VMware Windows 7 support as host operating system and Windows Server 2003 as the operating system prompted?

  Thanks in advance

  Hello

  IMHO, I think that Workstation is the vmware product just for you, the requirements

  It supports Windows 7 as a facilitator and Windows 2003 as a host with no problems. You can be confident about it at 100%.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!

  Virtually noob blog

• Satellite L850D - 12 p: need to copy of Windows 8 to reinstall the operating system

  Hello

  I have a Satellite L850D - 12 p and need a copy of windows 8 to reinstall the operating system

  I deleted all the data on the HD including the recovery partition, I don't envy spening £30 order disks and want to download the

  The supreme macine provided with Windows 8...

  Thank you

  Jaz

  It of not possible to download a recovery image Windows 8!

  If you have not created the disc clean recovery or recovery USB flash stick memory such as mentioned in the user manual, you must order such environment.

• BlackBerry 9550 smartphones - cannot load the operating system and a re-boot loop

  Sorry if this is going to be a long post.

  I've been running OS 428 and a hybrid (428 based) since it was leaked without a hitch. 2 weeks ago, my 9550 rebooted on its own with a JVM ERROR 534 (I think it's the code because the screen just turned white with the error message and then rebooted on its own). He never started up properly then. The boot process dates back to about 3/4 of the way then the FMV of error appears again then re - start. A batt pull does not help.

  I wiped and loaded (loader.exe) operating system but when loading cod, it will again restart (reboot occurs when email.cod is loading). Tried several times and never loaded properly. I tried a load OS 428 right and it went well. When it is started successfully, I wiped the device and loaded the hybrid that I used before and everything was fine. When filtered 451, I upgraded and everything is fine - for a week!

  He has just restarted on its own again. I think with the same JVM error code! I'm unable to load the operating system using loader.exe. I even tried the "loader.exe /nojvm" switch does not. I wiped with Jl_cmdr or BBSAK, still no go. I then used DM BB. I loaded OS 320 and loaded correctly. Then I wiped and loaded the OS. It is not load or when it loads successfully, the JVM error still appears 3/4 of the way of the boot process.

  So when I load OS 320, it will load fine even after a battery pull. If I use OS 428 or 451 (both narrowed via Shrink-a-BONE), JVM error no longer appears when using the device or during the startup process. Don't forget not that previously I was using either straight (shrunken) 428 or 451 and a hybrid with no problems.

  I decided to try a derelict OS 451 and used the "Platform.alx" of OS 320 file. It works so far! Pulled the battery about 4 - 5 times already and loaded all my apps and no JVM error for about 2 days. I tried right OS 320 and he also re - will start on its own several times a day.

  It looks like completely wipe the device using BBSAK, Jl_cmdr and DM BB do not really completely clear the device.

  What could have caused the reboots and error JVM?

  EDIT: I tried to wipe the device using the erase option in the security options. The status bar has reached 100% and then restarting the device, the FMV of error pops up again and my 9550 goes back to a continuous process of reboot (even pulled the battery).

  EDIT: I tried the command line "javaloade.exe usb - cloth" to wipe the device and the OS loaded (using loader.exe /nojvm) very well. In the end, shippers said "updated successfully". The unit restarted and about 3/4 of the way - another jvm error! I removed the battery and wait a few minutes before re - insert and is currently the starting now... Will update what's going to happen...

  EDIT: Yes! It finally starts. Will try an another battery pull... 1/4 of the way in which the boot process - another JVM error! Pulled the battery and restart... Error JVM still about 50% in the boot process.

  EDIT: Can't get any OS to load using 'loader.exe' or 'loader.exe /nojvm. It stops during email.cod loading, then restarts. I was able to load OS 320 well via BB DM. problem is when I click on Options, error: "error starting net_rimm_bb_options_app: symbol KeywordFilteredScreen.» KeyChar "not found" is my watered device? Help, please. Thank you!

  EDIT: I tried to load the operating system by:

  -remove the battery.

  -Connect to the PC.

  -Command prompt: command /nojvm loader.exe

  -When it says connection to the device and the battery with a red 'X' icon is displayed, I re - insert the battery.

  -The operating system loads very well but are unable to properly start like 3/4 of the progress bar startup occurs an error in the JVM and then reboot again. Help!

  --> Was able to start properly after a second reboot not forced. Will try a battery pull... JVM error again... Will allow it to boot on his own w/o a battery pull...  Error JVM... Removed the battery, re - insert... Error JVM... allowed to start on its own... Error JVM!... I remove the battery and reinsert after 5 minutes... JVM error yet... What is it recharges without end?

  Just had my 9550's replaced and all of the good mother!

• In Windows 7, cannot access the user profile get the error "the service user profile Service has no logon.

  When you try to access the user profile, get the error message "the service user profile Service has no logon.  User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should).  Anyway to fix the corrupted if user profile profile are available?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Windows 8 cannot access the drive properties by right-clicking on a no C SATA or USB drive

  Normally the drive properties are selected by right clicking the icon of the hard disk, which gives access to the use of storage and the Player options selected check disk. In Windows 8, I can get the properties of the disk on my C drive by right clicking, but not on any other drive. Right-clicking on any non C drive of the computer loses the office for about 10 seconds, then it returns, but never shows the drive properties window. Help, please! Thank you

  Hello

  Welcome to Microsoft, the best place for all your related queries windows community.

  I see that you are unable to access the drive other than drive C Properties window.

  I would like to suggest to run the command sfc/scannow because it is something related to the file system and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations.

  Follow these steps to run sfc/scan.

  a. press Windows + X and click/click on (Admin) command prompt.

  b b.. in the elevated command prompt, type sfc/scannow , and then press enter.

  NOTE: It can take some time to finish the race.

  Let us know the results.

  If you have other questions related to the properties of the disk, feel free to join us at any time. We're always here to help.

• Windows Server cannot access the folder

  Windows Server 2008 R2 SP1 Standard, I have a folder that I created.  I can access the folder if I go through the C:\ drive, but can't if I try UNC \\ServerName\ or \\IPAddress\ and receive a

  Windows cannot access \\ServerName\...
  You are not allowed to access \\ServerName\... Contact your network administrator to request access.

  but when I check the permissions on the folder, I'm registered and received a control total change, read & execute, display the contents of the folder, read, write.

  I need to be able to assign the UNC path to a database, and it is a failure because of this problem.

  Anyone have any ideas?

  QuestionBoy

  You will need to create a new post on the TechNet forums for assistance with Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows 7 cannot access the cliché in server 2003

  Hello world:

  I using windows 7 pro,
  my company has a server and version is windows server 2003,
  function of shadow copy are already active on the server.
  However, when I map the network drive to share the Server 2003 folder in my pc.
  I want to check the previous version on the network drive on my pc,
  but it does not show NO previous version available.
  When I using my PC to refuel, windows xp version checks the card reader.
  Well Yes, the previous version is show all.
  I was wondering why windows 7 cannot see any previous version?
  kindly help me, thank you very much!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• In the recovery system and he wants that I select configuration information. File, because it cannot find the operating system, but do not know what to choose

  Hello

  I am in the recovery of the system, which I have to by selecting f8 and "repair your computer", and after taking me to a window that says "select an oprerating system to repair...." If you don't see your operating system listed, click load drivers to load the drivers for your hard disks'.  Then when I click load drivers he wants me to select a file in System32 menu configuration information, but I don't know what to choose.

  Thank you

  Centi

  Hi centi,.

  1. Why did you start the windows recovery environment by pressing the F8 key?
  2. do you get an error at startup of the system?

  If you are unable to start Windows in normal mode, try the following steps:
  a. boot to the Windows recovery environment by pressing the F8 key.
  b. on the window that says "select an operating system to repair" click Cancel to see Windows Recovery Options window, and then select command prompt.
  (c) in the command prompt, type the following command and press ENTER: Bootrec.exe /RebuildBcd
  Output Type d and hit enter to close the command prompt.
  f. restart the computer in normal mode and check if the computer starts Windows successfully.

  Discover How to use the Bootrec.exe in the Windows recovery environment to troubleshoot and repair startup in Windows problems

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro S500-10F - cannot reinstall the operating system

  Hello

  I have a Satellite Pro S500-10F provided with Windows 7 Professional with downgrade rights (and DVD) to XP Pro. I downgraded to XP Pro and everything worked fine (I did it on a number of similar machines).

  Then Windows started to have problems and crashing with BSOD. I decided to rebuild the machine to reinstall Windows XP Pro from DVD supplied with the machine. The thing is it gets 2% and then gives the BSOD.

  I thought it was the hard drive because there was some disk errors when it removed and put it outside of another machine, so replaced. Still the same problem. I tried to connect external USB DVD drive and boot from that. He did indeed start the external drive but then for some reason, try to copy the files of its own DVD player. I tried to reinstall Windows 7 Pro of the DVD to the top together, I created, this failed. I tried to install Windows XP Pro since version box and have failed.

  At this stage do not know if DVD player or what. He tried to build start player flash, but even if the system seen as boot option, then tried to boot from the network?

  Any help much appreciated.
  Thank you
  J

  Hey Buddy,

  To be honest I put t think that it is what you can do. You have tested the recovery disk and a new HARD drive, but the same happens. So that would mean it's hardware related problem.

  TOSHIBA recovery disk contains an image pre-tested all drivers and tools. This means that you can still install Windows recovery disc and it will work. If it's not (like in your case) it something wrong with the hardware.

  If your laptop is still under warranty valid, you can bring it to a service provider allowed in your country and guys can fix this for free because of the guarantee. Get in touch with technicians and explain your problem, they will sort it out for you. ;)

• Error - location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image cannot access the desktop icon to burn a DVD.

  Original title: I can't access my desktop icon to burn a dvd.

  I can't access my desktop icon to burn a dvd.  The message I get is as follows, "location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image."  Please check this against your installation diskette. "On my toolbar, it said,"mediahub.exe - bad image"can someone please help me as I've used in the past to burn CDs and DVDs.  He moved with the computer.  Thank you

  Hello

  1. have you done any hardware changes or software on your computer before this problem?

  2 do you have a copy of Sonic application backup to reinstall it later?

  I suggest you to uninstall Sonic since Add / Remove Programs. Subsequently, check if you are able to burn CDs in your computer.

  
  Reference: burn your own custom CDs

  Hope the helps of information.

• Acer Aspire, Windows 7, cannot access the internet or reinstall the drivers? How can I fix?

  I uninstalled the driver realtek audio, and then I lost everything. Windows doesn't detect any hardware on my device. Nothing seems to work now

   
  [Moved from comments]

  Hi Mickey,

  1. What is the brand and model of the Acer laptop?
  2. Have you tried to check if the device is detected in Device Manager?

  If you have access to the mouse and the keyboard please try the following steps:

  Method 1:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Run the tool and troubleshooting hardware devices

  Method 2:

  Use Device Manager to find the hardware changes.

  Note:

  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  In Device Manager, click on your computer so that it appears highlighted.
  b. click Action and then click Scan for hardware changes.
  c. check the USB device to see if it works.
  d. restart the computer.

  Method 3:

  Download the drivers using another computer by visiting the manufacturer's website save it to a location external (USB key) and then install it in the computer in question.

  Please post back with the State of the question.

• Automatic update of Windows for my Vista Business hung on Jan 6, 10. He tried to uninstall automatically... now says that I have to reinstall Windows. Cannot access the Internet, cannot restore, can't do anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How to restore?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  FYI
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3
  Reinstall Windows Vista when you want to restore the default Windows settings or when you are having problems with Windows and that you need to reinstall it by performing a clean installation. TaurArian [MVP] 2005-2010 - Update Services

• Windows 7. cannot access the menu widget to click with the right button on the desktop / gadgets

  Hoping that someone can help or has had a similar problem.

  I just bought a new PC with windows 7, get used to gadgets and was dubious about downloading msn no cert apps/gadgets...

  yesterday I downloaded a facebook gadget that worked well at first, but today there dissapeared.couldnt give a s * 1 t on the app
  but its stopped me access my gadgets list via a right click on the desktop background and selection gadgets... nothing happens, so I guess that its facebook app, I installed. If all goes well, there is a fix for this

  any help would be appreciated... ive been using xp so I havnt had the negative acknowledgement of this gadget stuff yet.

  Thanks :)

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner