need help not null error: xml or onComplete?

Similar Questions

• [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

  [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

  I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

  Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

  I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.

• Compaq cq10: need help please code error: CNU0015RN9 on compaq cq10 150ev

  Need help please code error: CNU0015RN9

  Thank you in advance!

  Hello
  
  No problem. Did you do a hard reset and try again?
  
  For the error code, check again a time-
  
  Try:
  
  e9l11f3zv7
  
  all lowercase letters
  
  first letter is a small suitcase E
  second is number Nine
  third letter is small case L
  fourth & fifth is number one
  Sixth letter is small box F
  seventh is number three
  eighth letter is small suitcase Z
  ninth letter is small case V
  the last is number seven
  
  Concerning
  
  Visruth

• Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop

  Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE

  This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.

  I want to thank all in advance for your answers.

  Nelson Santiago

  Hi NELSONSANTIAGO,

  1. when exactly you receive the error message?

  2. is the Belkin easy transfer cable recognized by the Windows XP computer?

  This file may be located on the Belkin Easy Transfer Cable installation disc.

  For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.

  http://en-UK-support.Belkin.com/app/product/detail/p/4825

• Need help with the error in windows update 80244019 is urgent please

  Please I need help urgent problem error update.

  I have a Dell Inspiron 1564, running Service Pack 1 of Windows 7.   I tried several times to update windows and nothing, just appears this error: Code 80244019, tried to install the Windows update agent and pops up the same error., NetFxRepair tool and nothing, FixDotNet, and nothing.  Did a recovery to the fabric (by default) and nothing.   About 2 years ago, I disabled the update and about 2 months ago I tried to update and I forgot the error. Now I need to reinstall all my programs, in the hope that with a recovery, it will fix the error and thrust my laptop, but now is worse, because the installation of updated doesn´t work, Corel Draw X 4 doesn´t supposed error of .NET Framework, so I tried the fixdotnet and netfx repair tool, but nothing. I need to work and I have can´t I have only a portable empty with an outdated windows. Help, please!

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  or

  Cannot install updates in Windows...
  http://support.Microsoft.com/kb/2509997

• I need help I get error 6 installation program and creative cloud 1 error.

  I need help I get error 6 installation program and creative cloud 1 error.

  Code 1 https://forums.adobe.com/thread/1434528

  6 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html code

• Installation of the elements 11 on Mac. Need help with installation error "Setup wants to make changes.

  Installation of items 11 Mac 10.8.2. Need help with Setup error: installation wants to make changes. Type your password to allow this. "After entering the Adobe password, nothing happens.  Locked for more than installation.  Any ideas?  Phone support Adobe couldn't help.

  Just prior to leaving changes (installation in this case) is done on the Mac OS application password & it must be the password for Mac system. This password is the native guest of the system clean & accept the password only. Please make sure that it's the right password (all/admin rights) and the game should work.

• Need help to retrieve the XML file

  Hello

  I'm new to xml query and I need help badly. I have a file xml with the following content. I need help to extract data as:

  beginTime	localDn	measObjLdn	hdlcRxErrAbort	hdlcRxErrCRC	hdlcRxErrLackOfBufs
  2015 07-28 T 14: 45:00 + 03:00	ERSGSN01	MagId.SlotId.E1/T1Trunk.FractionId=2.8.6.1	2400	1020	0
  2015 07-28 T 14: 45:00 + 03:00	ERSGSN01	MagId.SlotId.E1/T1Trunk.FractionId=2.9.3.1	0	0	0
  2015 07-28 T 14: 45:00 + 03:00	ERSGSN01	MagId.SlotId.E1/T1Trunk.FractionId=2.9.4.1	0	0	0

  and the XML data I have are:

  <? XML version = "1.0" encoding = "UTF-8"? >

  <? XML-stylesheet type = "text/xsl" href = "MeasDataCollection.xsl"? >

  " < measCollecFile xmlns =" http://www.3GPP.org/FTP/specs/archive/32_series/32.435#measCollec ">

  < fileFormatVersion = "32.435 V9.0" fileHeader vendorName = "Ericsson" >

  < fileSender / >

  < measCollec beginTime = "2015-07 - 28 T 14: 45:00 + 03:00" / >

  < / fileHeader >

  < measData >

  < managedElement localDn = "ERSGSN01" / >

  < measInfo measInfoId = ' E1/T1, hdlc' >

  < job jobId = "Meas_E1T1_all" / >

  < duration granPeriod = "PT900S" endTime = "2015-07 - 28 T 15: 00:01 + 03:00" / >

  < duration repPeriod = "PT900S" / >

  < p measType = "1" > hdlcRxErrAbort < / measType >

  < p measType = "2" > hdlcRxErrCRC < / measType >

  < p measType = "3" > hdlcRxErrLackOfBufs < / measType >

  < p measType = "4" > hdlcRxErrMaxFrameLen < / measType >

  < p measType = "5" > hdlcRxErrNonOctetAlign < / measType >

  < p measType = "6" > hdlcRxErrQueue < / measType >

  < p measType = "7" > hdlcRxOK < / measType >

  < p measType = "8" > hdlcRxOctets < / measType >

  < p measType '9' = > hdlcTxOK < / measType >

  < p measType = "10" > hdlcTxOctets < / measType >

  < measValue measObjLdn="MagId.SlotId.E1/T1Trunk.FractionId=2.8.6.1" >

  < p r = "1" > 2400 / < r >

  < p r '2' = > 1020 / < r >

  < p r = "3" >/< r > 0

  < p r = "4" >/< r > 0

  < p r = "5" > </r > 0

  < p r = "6" >/< r > 0

  < p r = "7" >/< r > 0

  < p r = "8" > 0 </r >

  < p r '9' = > 295 / < r >

  < p r = "10" > 4130 / < r >

  < / measValue >

  < measValue measObjLdn="MagId.SlotId.E1/T1Trunk.FractionId=2.9.3.1" >

  < p r = '1' >/< r > 0

  < p r = "2" >/< r > 0

  < p r = "3" >/< r > 0

  < p r = "4" >/< r > 0

  < p r = "5" > </r > 0

  < p r = "6" >/< r > 0

  < p r = "7" >/< r > 0

  < p r = "8" > 0 </r >

  < p r '9' = > 295 / < r >

  < p r = "10" > 4130 / < r >

  < / measValue >

  < measValue measObjLdn="MagId.SlotId.E1/T1Trunk.FractionId=2.9.4.1" >

  < p r = '1' >/< r > 0

  < p r = "2" >/< r > 0

  < p r = "3" >/< r > 0

  < p r = "4" >/< r > 0

  < p r = "5" > </r > 0

  < p r = "6" >/< r > 0

  < p r = "7" >/< r > 0

  < p r = "8" > 0 </r >

  < p r '9' = > 295 / < r >

  < p r = "10" > 4130 / < r >

  < / measValue >

  < / measInfo >

  < / measData >

  < fileFooter >

  < measCollec = endTime "2015-07 - 28 T 15: 00:01 + 03:00" / >

  < / fileFooter >

  < / measCollecFile >

  Help, please. I tried to select a value using the following xml query which does not lead to any output:

  WITH t AS (SELECT xmltype (bfilename('SGSN_STAT_ERICSSON', 'A20150728.1445+0300-20150728.1500+0300_Meas_E1T1_all.52'), nls_charset_id('UTF-8')) FROM dual xmlcol)

  SELECT beginTime, localDn, measObjLdn, hdlcRxErrAbort, hdlcRxErrCRC, hdlcRxErrLackOfBufs

  T, XMLTABLE

  (XMLNAMESPACES ('http://www.3gpp.org/ftp/specs/archive/32_series/32.435#measCollec' as 'ns1'), )

  ' / measCollecFile'

  passage xmlcol

  columns

  beginTime PATH VARCHAR2 (32) ' / measCollec/@beginTime',

  localDn PATH VARCHAR2 (32) ' / measData/managedElement@localDn',

  measObjLdn PATH VARCHAR2 (32) ' / measData/measInfo/measValue@measObjLdn',

  ["hdlcRxErrAbort PATH VARCHAR2 (32) ' / measData/measInfo/measValue/r[@p="1 ']',

  ["hdlcRxErrCRC PATH VARCHAR2 (32) ' / measData/measInfo/measValue/r[@p="2 ']',

  "[" hdlcRxErrLackOfBufs PATH VARCHAR2 (32) ' / measData/measInfo/measValue/r[@p="3 ']"

  )

  Sincere greetings

  Either way, using an XQuery FLWOR expression:

  select x.*
  from xmltable(
         xmlnamespaces(default 'http://www.3gpp.org/ftp/specs/archive/32_series/32.435#measCollec')
       , 'for $h in /measCollecFile
            , $v in $h/measData/measInfo/measValue
          return element row {
            $h/fileHeader/measCollec/@beginTime
          , $h/measData/managedElement/@localDn
          , $v/@measObjLdn
          , element r1 {$v/r[@p="1"]}
          , element r2 {$v/r[@p="2"]}
          , element r3 {$v/r[@p="3"]}
          }'
         passing xmltype(bfilename('TEST_DIR', 'test.xml'), nls_charset_id('AL32UTF8'))
         columns beginTime           timestamp with time zone path '@beginTime'
               , localDn             varchar2(32)             path '@localDn'
               , measObjLdn          varchar2(80)             path '@measObjLdn'
               , hdlcRxErrAbort      number                   path 'r1'
               , hdlcRxErrCRC        number                   path 'r2'
               , hdlcRxErrLackOfBufs number                   path 'r3'
       ) x ;
  

• Need help with the error msg 1120: access of undefined property

  I'm not a coder, so I need help coding. Any help would be greatly appreciated.

  I'm a Flash banner that was given instructions "clickTAG" of Google. The code, they said to put the button is:

  Parameter ClickTAG for ActionScript 3 code:

  import flash.events.MouseEvent;
  import flash.net.URLRequest;
  // ......

  
  () someButton_or_displayObject_to_receive_mouseClick.addEventListener
  MouseEvent.CLICK,
  function(Event: MouseEvent): void {}
  flash.net.navigateToURL (new URLRequest (root.loaderInfo.parameters.clickTAG), '_blank');
  }
  );

  Replace someButton_or_displayObject_to_receive_mouseClick with the actual name of the button that will receive the click.

  Note that it is not necessary to specify the destination URL of the ad anywhere in this code; This is supported through the use of "clickTAG". In addition, according to the structure of your Flash Ad, it may be necessary to add "_root." or "_level0." for "clickTAG" above, resulting in a "_root.clickTAG" or "_level0.clickTAG". It is strongly recommended to download the ad on your account and check the ad behaves normally until she'll live, granted for the necessary changes.

  And this is the code that I put in (btnClickTag is the name of my button):

  import flash.events.MouseEvent;

  import flash.net.URLRequest;

  
  

  
  

  () btnClickTag.addEventListener

  MouseEvent.CLICK,

  function(Event: MouseEvent): void {}

  flash.net.navigateToURL (new URLRequest (root.loaderInfo.parameters.clickTAG), '_blank');

  }

  );

  and this is the error I got:

  Scene1, layer 'actions', image1, 1120: access of undefined property btnClickTag. () btnClickTag.addEventListener

  First of all, make sure that you have assigned this name to the button using the properties panel, and then, don't forget to adjust the code so that it is not spread over several lines... normally it must be on a single line.  Do not nest the function where the listener either, so try the following (not necessary for import declarations)...

  btnClickTag.addEventListener (MouseEvent.CLICK, tagClick);

  function tagClick(event:MouseEvent):void {}

  navigateToURL (new URLRequest (root.loaderInfo.parameters.clickTAG), '_blank');

  }

• Need help with analysis on XML DataGrid

  Hello

  I retrivied in my function from HttpService result data.

  
  

  < list >
  < user >
  < ename > JAMES < / ename >
  < > 7900 empno < / empno >
  < / user >
  < user >
  < ename > FORD < / ename >
  < > 7902 empno < / empno >
  < / user >
  < user >
  < ename > MILLER < / ename >
  < > 7934 empno < / empno >
  < / user >
  < / list >

  [Bindable]
  private var xmldata:XML;
  
  private void resultHandler(event:ResultEvent):void {}
  XMLDATA = Event.Result as XML;
  }
  
  

  
  < mx:DataGrid x = "50" y = "23" width = "469" height = "265" dataProvider = "{xmldata." The user} ">"
  < mx:columns >
  < mx:DataGridColumn headerText = "Type" dataField = "ename" / >
  < mx:DataGridColumn headerText = "Sales" dataField = "empno" / >
  < / mx:columns >
  < / mx:DataGrid >
  

  But this displays all the data in the DataGrid control.

  Could someone help me please.

  Thank you.

  After obtaining data affect data in the data grid

  DataGrid.DataProvider = xml;

  and also do datagrid.invalidateList () after u get the data if the line above does not help

  See also if the data provider is not null, if nothing is done.

• Need help with the error of connection Internet "Reset local connection adapter".

  Original title: Need help with Internet connection.

  Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

  Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

  Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

  Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

  But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

  Edit has added:

  Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.

  
  

  Will be a new connection to the Internet.

• I need help, fixed an error of update updated 11.0.14 installation. Fatal error during installation.

  I need help for a mistake that I keep trying to do an update. Update is 11.0.14 and the installation error 1603 Fatal error message

  Error 1603: A fatal error occurred during the installation of Adobe Creative Suite

• need help with the error code 150:30

  need help to find out what error code 150:30 is and how to fix it

  See the following topics:

  Error 150:30 - error "Licensing has stopped working". Mac OS:

  http://helpx.Adobe.com/x-productkb/global/error-licensing-stopped-Mac-OS.html

• [Need help] Command execution error: null java.lang.ClassCastException - HQAPI

  Hello

  I need your support on the following error, I got from hqapi when I try to «./hqapi.sh alertdefinition sync. My order is:

  # cat ad10100.xml

  <? XML version = "1.0" encoding = "UTF-8" standalone = "yes"? >
  < AlertDefinitionResponse >
  Success of < status > < / status >
  < AlertDefinition mtime = ctime "1331204852666" = "1331204068642" id = "10100" name = "Fs [/] ok" description = "Filesystem sotto soglia critica" priority = "2" enabled = "true" active = "true" frequency = "0" count = "0" range = "0" willRecover = "false" notifyFiltered = "false" controlFiltered = "false" >
  < resource id = "10910" name = "/ dev/map/VolGroup00-LogVol00 of HR-client Linux file system mounted on / (local/ext3)" / >
  < AlertCondition required = "true" type = "1" thresholdValue = "50.0" thresholdComparator = "" & lt; "thresholdMetric ="Use %"/ >"
  < AlertAction id = "10101" className="org.hyperic.hq.measurement.action.MetricAlertAction"/ >
  < / AlertDefinition >
  < / AlertDefinitionResponse >

  # cat ad10100.xml | SH hqapi.sh alertdefinition sync

  Command execution error: null
  java.lang.ClassCastException
  at java.lang.Class.cast(Class.java:2990)
  at org.hyperic.hq.hqapi1.XmlUtil.deserialize(XmlUtil.java:64)
  at org.hyperic.hq.hqapi1.tools.AlertDefinitionCommand.sync(AlertDefinitionCommand.java:439)
  at org.hyperic.hq.hqapi1.tools.AlertDefinitionCommand.handleCommand(AlertDefinitionCommand.java:152)
  at org.hyperic.hq.hqapi1.tools.Shell.dispatchCommand(Shell.java:245)
  at org.hyperic.hq.hqapi1.tools.Shell.main(Shell.java:260)

  I have tested the following workaround but unsuccessfully:

  -try d'utiliser./hqapi.sh instead hqapi.sh sh

  -try to use different java bin (mine is/usr/java/default jdk6_u31), I tried /opt/hyperic/server-4.5.3/jre/bin/

  -Try sh hqapi.sh alertdefinition sync - file = ad10100.xml

  -try to change the XML, removal of State <>success < / status >

  HQAPI version: hqapi1-client - 4.3.0

  Hyperic HQ version: 4.5.3 - GA

  I need to synchronize alertdefinitions based on XML files please help me around this error.

  Thank you very much.

  Claudio

  Trying some updates for automatic alert via the script API definition, I met this problem as well. No matter what I did, it seemed that this class cast exception would be thrown. I downloaded the Github source HQAPI and started searching. I found that the error was in the call to the XmlUtils.deserialize method, which has invoked a JAXBContext to select the class of the object to return, after analysis of the XML. The code that calls the method waits get an object that can be cast to the type AlertDefinitionsResponse, but he returned to an object that must be cast to type AlertDefinitionResponse.

  After a bit of investigation, I realized that JAXB is the context of the node root XML data. Because the root node is AlertDefinitionResponse, he always returned an object of this type, instead of the expected AlertDefinitionsResponse type. Currently, the only way I found to get around this problem is to change the node root to AlertDefinitionsResponse. So, sync-able XML would look like the following, based on XML of the original poster.

  
  
       Success
      
          
          
          
      
  

  I raise a question on the Github repository so that officials are aware of this problem.

  EDIT: The problem has been discussed here

• printer does not print. the connections are fine. onw document in the print queue will not be deleted. Need help, please no error messages given

  I checked the print queue.  I tried to delete the document does not have several times without success.  There is no error message given.  The printer is just the print requests in the queue with answer oout.  Nothing will get the printer to answer.  Help, please.

  Try this procedure (Note: you must be an administrator to do so):

  1. click on the Start button.

  2. right click "My computer" on the left side, then select 'manage '.

  3. click on "Continue" to popup security message that appears.

  4. in the middle pane of the window that opens, double click on "Services and Applications".

  5. double-click on 'Services '.

  6 scroll to find "print spooler".

  7. right click and select 'Restart' (Note: make sure that you have not opened during this operation the printer print queue window).

  You should now be able to delete the print job (or it may have been deleted automatically).

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.