Need help: panic (report below)

Similar Questions

• Need help with reporting (vm, portgroup vlanid)

  Hello

  I need help.

  I want to create a report that shows the following:

  Report Portgroup (Networkname), VLANID, VM (Parent), Connectionstate

  
  PortGroup, VM and Connectionstate are indicated by:

  $pg1 = get - VM - DistributedSwitch dvSwitch1 | Get-NIC
  $pg1 |  Select Networkname, Parent, connectionstate

  The VLANID is indicated by:

  
  $VMs = get - VM - DistributedSwitch dvSwitch1
  $pg2 = $vms | Get-VirtualPortGroup

  $vlanid = $pg2 | Select name, @{N = 'Vlanid'; E = {$VLANID. ExtensionData.config.DefaultPortConfig.VLAN.VlanId}}

  The question is how to combine these lines and be able to add the vlanid State?

  I tried something like:

  Add-Member - InputObject $pg1 - name ('Vlanid' + $_)-MemberType NoteProperty-value $vlanid.extensiondata.Config.DefaultPortConfig.Vlan.VlanId

  Thanks for help.

  concerning

  Andreas

  Try it like this

  foreach($vm in Get-VM -DistributedSwitch dvSw1){
      $nic = Get-NetworkAdapter -VM $vm    $vm | Select Name,
          @{N="NetworkName";E={$nic.NetworkName}},
          @{N="ConnectionState";E={$nic.ConnectionState.Connected}},
          @{N="VlanId";E={(Get-VirtualPortGroup -VM $vm -Distributed).Extensiondata.Config.DefaultPortConfig.Vlan.VlanId}}
  }
  

• Need help getting reports significant chargeback

  I'm trying to understand if there is a way to obtain Chargeback reports more meaningful than what comes out of the box with vFoglight 6.7.1.  If I use flat on many levels, I have to create too many different levels and modules (and spend too much time by assigning them).  If I use MRU I get closer to what I'm looking for, but I don't know how much storage value add I/O.  I need to take into account the costs of storage, but I need to be able to charge per GB, are not the OPS / s.  Someone has found a way to dynamically load things like the number of processors, RAM and storage (per GB)?  It doesn't seem practical to create add ons for many configurations you end up with when you have hundreds or thousands of virtual machines.

  In short, I would like to be able to set a cost by vCPU and GB RAM GB of storage and power who object my VMs.  If you use MRU I would like be able to replace the storage I/O with used storage space, or add at least as an option.  If there is a way to add dynamic Add-ons which would work too.

  Thank you

  Here's how opposition to the payment:

  GHz consumed * rate per GHz

  vRAM Allocated * availability % * rate per GB vRAM

  Storage in GB * rate per GB allocated

  The reasoning is as follows:

  CPU allocated dynamically, and the number of cores is generally not relevant for most.  (Yes, I know vCPU to the ratio of base, but in real life environments, not usually the bottleneck CPU)

  vRam is not allocated dynamically, so using allocated RAM encourages its customers to pay attention to what they want and helps focus them on the joint efforts of resizing.

  The storage is the same, you pay for what you are asking and if you want to pay less, reduce your allocation.

  ====================================================================================================

  It is actually a pretty simple thing to write a report for and requires no internal billing module integrated at all (we do not use it).

  create a simple WCF called calcFunction to take 4 values double function as contexts and return args [0] * args [1] * args [2] * args [4]

  Create another simple WCF function called calcStorageAllocated, using virtual machine type VMWVirtualMachine as context, with the following code:

  storageTotal = 0.0 d

  VM? storage? datastoreUsage?. every {use-> += storageTotal ((utilisation?.committed + utilisation?. non validée) / 1024/1024/1024)}

  return storageTotal

  create a query to list the virtual machines in a context on a table-oriented entry line.

  Add additional context for cpuRate, vRamRate and storageRate

  Add the following columns:

  context, CPU, hostCPUs, usedHz

  calcFunction

  parameters: context/CPU/hostCPUs/usedHz/period/average, 0.0000000001, cpuRate, 1

  context/memory/allocated/period/average

  context, uptimePercent, period, average

  calcFunction

  parameters: context/memory/allocated/period/average,context/uptimePercent/period/average,vRamRate,0.0009765625

  calcStorageAllocated

  parameters: context

  calcFunction

  parameters: calcStorageAllocated , storageRate, 1.1

  It's a start, anyway.  might need a little tweaking and a lot of room for improvement, but this will give you a basic chargeback report.

• PS snapshot script... Need help with report

  I am trying to achieve when products are deployed on virtual machines, the instant Powershell script will execute and take snapshots, provide the report as html (output) and then run another Script that will be run against VI3 to commit all snapshots.

  I need assistance with the statement, I want to report to display the VM name + instant summary details, script below shows only instant summary.  Also if there is a script to commit all the snapshots on defined VM.

  **********************************************

  1. Variables

  $VCServerName = "VIServer.

  $CustomFieldName = 'Snapshots'

  $ManagedObjectType = "VMName".

  $today = (get-Date-Format ' YYYY-MM - dd_HH.mm.ss - tt')

  $nsn = "PowerShell-$today.

  $a = ""

  1. Script

  SE connect-VIServer $VCServerName - Port 443 - HTTPS protocol

  Get - VM $ManagedObjectType | New-Snapshot - name $nsn - Description "Instant product update"

  Get-Snapshot $ManagedObjectType | SELECT name, ID, Description, VM creation. ConvertTo-HTML-head $a | Out-file C:\Report.htm

  Invoke-Expression C:\Report.htm

  Disconnect-VIServer $VCServerName - confirm: $False

  You must select the last one.

  Something like this for example

  Get-Snapshot -VM $vm | Sort Created | Select -Last 1 | Remove-Snapshot -Confirm:$false
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Need help on report of prior ART.

  Hello
  In my report called "Summary of debtor aging" which is contains columns like customer, DueDays, amount due.
  My requirement need to split due days as columns 0-30 days, 30-60 days, 60 to 180 days and > 180 days and duedays according to the quantity would be that particular column in PivotTable view. How to achieve this. Please help on this.

  What is the 'DueDays' field has? This is a list of dates or is it a list of numbers?

  Assuming it is a date field that has a list of dates such as February 29, 2012 ', I approach it like this:

  Create a new field said 'diff Date' and timestampdiff function compares the dates by the current date (or date your condition comes to conclude what is from 1 to 30 days).

  It will be something like this (tsi_sql_day, 'duedates', current_day) timestampdiff. The syntax is perhaps not 100% correct, but the release of this expression will give you integers.

  Then, create another column saying "age in days", in there use a case statement to divide categories. It would go like this:

  case when 'diff date' < 30="" then="" '0-30="" days'="" when="" 'date="" diff'=""> = 30 and 'diff date' < 60="" then="" '30-60="" days'="" when="" 'date="" diff'=""> = 60 and the 'diff date' < 180="" then="" '60-180="" days'="" when="" 'date="" diff'=""> 180 then 'more than 180 days' end other "N/a".

  Again, you can check the syntax to ensure that it is correct...

  Create your pivot table and column to 'Diff Date' section of the column, divide it into 4 columns in pivot view. You can choose to exclude the other date 2 columns or leave it on the report.

  Try and see if it helps

  Thank you

  http://obinsight.blogspot.com/

  Published by: obinsight on February 29, 2012 09:31

• Need help have reported my stolen Ultrabook

  Original title: Ultrabook stolen

  I am a student who is studying to become a certified Microsoft.

  February 6, 2014, my computer was stolen during the lunch break. Is there a way of

  report to Microsoft, and he would report it. It has already been reported to

  the police. The school is not useful because it was most likely another student.

  PLEASE, I BEG YOU! Help me A.S.A.P. thank you responding.

  Hello

  Microsoft keeps no information to help you find the computer. Check with the

  manufacturer of the system for the serial number and report it to the police. Keep an eye on Craig
  List, ebay and other sales sites.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Need help with report of WGA

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - X92GV - V7DCV-P4K27
  The Windows Product Key hash: aU2z1/fnhnLHmhBm699qYZT2E6s =
  Windows product ID: 00426-OEM-8992662-00400
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010100.0.0.001
  ID: {C21979F8-9DE4-4196-AEA9-31EEADF1ED72} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {C21979F8-9DE4-4196-AEA9-31EEADF1ED72}1.9.0027.06.1.7600.2.00010100.0.0.001x 64*-*-*-*-P4K2700426-OEM-8992662-00400S-1-5-21-4294333439-1165172299-1530055978AcerAspire E1-4702Phoenix Technologies Ltd. V2.04 20130918000000.000000 + 0005EB83607018400FE04090409Myanmar Standard Time(GMT+06:30)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00178-926-600400-02-1033-7600.0000-0442014
  Installation ID: 017050301373112651397904489563719854511975514796458574
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: P4K27
  License status: Notification
  Reason for the notification: 0xC004F057.
  Remaining Windows rearm count: 3
  Trust time: 29/03/2014 08:23:40

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GH2ek48rndWmVrmMF/mhq4d7l + WYw is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS ACRPRDCT
  FACP ACRSYS ACRPRDCT
  HPET ACRSYS ACRPRDCT
  MCFG ACRSYS ACRPRDCT
  SSDT ACRSYS PtidDevc
  ASF!            ACRSYS ACRPRDCT
  WPBT ACRSYS ACRPRDCT
  FPDT ACRSYS ACRPRDCT
  SSDT ACRSYS PtidDevc
  SSDT ACRSYS PtidDevc
  UEFI ACRSYS ACRPRDCT
  UEFI ACRSYS ACRPRDCT
  POAT ACRSYS ACRPRDCT
  UEFI ACRSYS ACRPRDCT
  DBG2 ACRSYS ACRPRDCT

  Separated from this thread by Moderator:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-do-i-Chang-window-7-not-genuine-to-Windows7/4d89b6a1-0858-42B6-88b0-f55439dc3081#LastReply

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-*-X92GV-V7DCV-P4K27

  This product key is a well-known pirated product key.

  You need to buy and install a genuine version of Windows 7.

  Concerning

• Need help on the below question

  Oracle 10.2.0.4 = version

  OS = RHEl 5.5

  Testing for oracle and you locking mechanism you have something weired, need to answer on the same.

  The test case has been as below,

  Conn scott/tiger

  SQL > create table t1 (name empcode number (10), varchar2 (10), number (10)) of salary;

  Table created.

  SQL > insert into t1 values('SARAH',100,2000);

  1 line of creation.

  SQL > insert into t1 values ('marry', 101, 2300);

  1 line of creation.

  SQL > commit;

  Validation complete.

  SQL > select * from t1;

  NAME EMPCODE SALARY
  ---------- ---------- ----------
  SARAH 100 2000
  marry 101 2300

  Then using connected to the database using 2 different terminals and pulled the below sql cmd

  Terminal 1

  Update t1 set EMPCODE = 200 where EMPCODE = 101;

  causing the line lock on t1 and waiting for validation.

  Terminal 2

  Update t1 set NAME is 'MARRY' where salary = 2300;.

  crashes, as the line has been locked by the first terminal.

  So what I did is out the first terminal without using validation, then the output of the second terminal also without validation.

  After that, I've connected to the database using the third terminal and check that the value and I found is at the bottom.

  SQL > select * from t1;

  NAME EMPCODE SALARY
  ---------- ---------- ----------
  SARAH 100 2000
  MARRY 200 2300

  can someone explain what happened.

  Kind regards

  Saurabh

  Hello

  "When you exit SQL *, he would always - there was an implicit 'validation work' issued to you just before it disconnect your session.

  Ref:the Blog of Tom Kyte: another SQL * Plus I learned...

  HTH

• Need help with report

  I am trying to create a report that displays the name, Powerstate and ToolsVersion.  I tried the following, but I have a blank record for PowerState:

  Get - VM | Get-View | Select-Object Name, @{N = "PowerState"; E={$_. PowerState}}, @{N = "ToolsVersion"; {E = {$_.config.tools.toolsVersion}}
  Any help would be appreciated

  Try it like this

  Get - VM |
  Select-Object Name, @{N = "PowerState"; E={$_. PowerState}}, @{N = "ToolsVersion"; E={$_. Extensiondata.config.tools.toolsVersion}}

  Or even easier, like this

  Get - VM |
  Select-Object Name, PowerState, @{N = "ToolsVersion"; E={$_. Extensiondata.config.tools.toolsVersion}}

• Need help for reporting the total capacity of the DS in service?

  I got this LucD script some time ago and I would like to know if it is possible to modify this script to display the capacity total datastore provisioned in multiple VCenter in different sites in view data warehouse | Summary tab. GroupBox ability ?

  $report = @()
  foreach($cluster in Get-Cluster){
      Get-Datastore -VMHost (Get-VMHost -Location $cluster | Select -First 1) | `
      Sort-Object -Property Name | ForEach-Object {
          $row = "" | Select-Object -Property Cluster, Datastore,CapacityGB,FreeSpaceGB
          $row.Cluster = $cluster.Name
          $row.Datastore = $_.Name
          $row.CapacityGB = [Math]::Round($_.CapacityMB/1KB,0)
          $row.FreeSpaceGB = [Math]::Round($_.FreeSpaceMB/1KB,0)
          $Report += $row
      }
  }
  $report | ft -AutoSize
  

  Any help would be greatly appreciated.
  

  Thank you.

  Of course, try this

  $report = @()
  foreach($cluster in Get-Cluster){
      Get-Datastore -VMHost (Get-VMHost -Location $cluster | Select -First 1) |     Sort-Object -Property Name | ForEach-Object {
          $row = "" | Select-Object -Property Cluster, Datastore,CapacityGB,FreeSpaceGB,ProvisionedGB
          $row.Cluster = $cluster.Name
          $row.Datastore = $_.Name
          $row.CapacityGB = [Math]::Round($_.CapacityMB/1KB,0)
          $row.FreeSpaceGB = [Math]::Round($_.FreeSpaceMB/1KB,0)
          $row.ProvisionedGB = [Math]::Round(($_.ExtensionData.Summary.Capacity - $_.Extensiondata.Summary.FreeSpace + $_.Extensiondata.Summary.Uncommitted)/1GB,0)
          $Report += $row    }
  }
  $report | ft -AutoSize
  

• Need help with query below

  Hi experts,
  
  Since the code mentioned below, I get the previous quarter start and end date:

  SELECT MIN (t), MAX (LAST_DAY (t)) INTO V_PRVQTD_STRT,V_PRVQTD_END
          FROM (SELECT ADD_MONTHS (TRUNC(TO_DATE(V_RPRT_DATE), 'YYYY'), LEVEL - 1) t,
                    TO_CHAR (ADD_MONTHS (TRUNC(TO_DATE(V_RPRT_DATE), 'YYYY'), LEVEL - 1), 'Q')QTD
          FROM DUAL
                   CONNECT BY LEVEL <= 12) A
                     WHERE A.QTD  = V_QUARTER_NUMBER-1

  but when I'm passing all the date in the first quarter according to the calendar year, ranging from 01-jan-YYYY and YYYY-Mar-31 he gives no value as subtracting quarter number V_QUARTER_NUMBER-1 m - 1.
  
  Can any1 help me to overcome this problem as its very urgent...
  
  Help appreciated
  
  Thnx in advance.

  If you are looking for the previous date of beginning and end of quarter, then you can use below

  SELECT   ADD_MONTHS(MIN (t),-3), ADD_MONTHS(MAX (LAST_DAY (t)),-3) -----------------code change
          FROM (SELECT ADD_MONTHS (TRUNC(TO_DATE(TO_DATE('01012012','DDMMYYYY')), 'YYYY'), LEVEL - 1)  t,
                    TO_CHAR (ADD_MONTHS (TRUNC(TO_DATE(TO_DATE('01012012','DDMMYYYY')), 'YYYY'), LEVEL - 1), 'Q')QTD
          FROM DUAL
                   CONNECT BY LEVEL <= 12) A
                     WHERE A.QTD  = 4;  -----change quater as per your requirement
  

  You can do both in the same essay

  SELECT   MIN (t)"CURNT_QTR_ST_DT", MAX (LAST_DAY (t))"CURNT_QTR_END_DT", ADD_MONTHS(MIN (t),-3) "PREV_QTR_ST_DT" , ADD_MONTHS(MAX (LAST_DAY (t)),-3) "PREV_QTR_END_DT"
          FROM (SELECT ADD_MONTHS (TRUNC(TO_DATE(TO_DATE('01012012','DDMMYYYY')), 'YYYY'), LEVEL - 1)  t,
                    TO_CHAR (ADD_MONTHS (TRUNC(TO_DATE(TO_DATE('01012012','DDMMYYYY')), 'YYYY'), LEVEL - 1), 'Q')QTD
          FROM DUAL
                   CONNECT BY LEVEL <= 12) A
                     WHERE A.QTD  = 1;
  Output
  -----------
  CURNT_QTR_ST_DT     CURNT_QTR_END_DT     PREV_QTR_ST_DT     PREV_QTR_END_DT
  1/1/2012     3/31/2012     10/1/2011     12/31/2011
  

  Published by: myOra_help on December 27, 2012 17:50

• Need help with report of scale measure/tool change area

  I try to use the measure area tool in Acrobat ms on a pdf plan I'm working on that. The EHR Architecture scale is 1/8 "= 1'. So I will try to change the ratio of the a.125 in = 1 ft scale in order to account for this, but it automatically rounds up a.13. Is there a way to avoid this and keep the number I had intend without it rounded up?

  Hi, Elia,.

  I don't see a way to add more than 2 decimal places to the measure tool scale ratio.

  You can send a request to feature here:

  Adobe - feature request/Bug Report Form

  Kind regards
  Rahul Tyagi

• Need help to report on the configurations of the virtual machine using PowerCLI

  Hi guys,.

  I try to shoot down vCenter virtual computer configuration details and am not having much luck with vCPU multicore machines.

  Looking at the lists of VMS in vSphere Client, it offers a column "Number of CPU" basis and does not include any other granularity (i.e. in terms of casings & carrots as opposed to simply 'CPU Count').

  I thought that maybe I have better luck using PowerCLI and essentially, the cmdlet "Get - VM" has the kind of information I'm looking for, but I find that it lacks a bit when it comes to vCPU details.  Essentially, it turns out that does not do much better than the list of virtual machines in vSphere Client because it produces only a "CPU Num" value, which is not particularly useful.

  For example, if "processors Num" 4, that '4' means?  This could mean one of the following:

  • 1 x 4 drivers
    
  • Core 2 x 2
    
  • Basic 4 x 1
    

  I hope someone out there can help produce me a list of virtual machines with details of configuration that includes both sockets & carrots for vCPU?

  Thanks in advance!

  Try like this

  Get-VM | Select Name, @{N="CPU";E={$_.ExtensionData.Config.hardware.numCPU/$_.ExtensionData.Config.hardware.numCoresPerSocket}}, @{N="Core per CPU";E={$_.ExtensionData.Config.hardware.numCoresPerSocket}}
  

• Need help to decipher the report panic

  My Mac Pro has had a few panic kernel last week and at least a couple of times would not start after the logo screen.  I could so he can start by Resetting PRAM only what she panics once again.   I don't know a lot about reading the reports of the panic, the only thing I noticed, is that it shows no DIMM 3 or 4.  Is it a hardware problem of RAM?  Any help would be appreciated.

  Anonymous UUID: 82B8536D-9B9C-A6E0-A37B-57D40AFF99A7

  Thu Sep 15 07:54:15 2016

  Panic report *.

  Machine-check capabilities: 0x0000000000001c09

  family: 6, model: 44 stepping: firmware 2:15

  signature: 0x206c2

  Xeon of Intel (r) CPU X 5650 @ 2.67 GHz

  9 banks of error reports

  CPU 0: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 1: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 2: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 3: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  4 processor: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 5: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 6: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 7: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 8: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 9: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 10: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 11: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  panic (appellant cpu 17 0xffffff801b3cf1ba): "control of Machine 0xffffff7f9d78d39c, registers: \n" "CR0: 0x000000008001003b, CR2: 0 x 0000000000000000, CR3: 0x000000001e372000, CR4: 0x00000000000226e0\n" "RAX: 0 x 0000000000000000, RBX: 0 x 0000000000000000, RCX: 0x00000000603d98dd, RDX: 0x7fffffffffffffff\n '" RSP: 0xffffff857ef03d00, PBR: 0xffffff857ef03d00, IHR: 0x7fffffffffffffff, RDI: 0xffffff85755f1148\n "" R8: 0xffffff8075947800, R9: 0xffffff7f9d7a3ef0, R10: 0x0000000071d8d02c, R11: 0x0000000071d81396\n ' ' R12: 0x7fffffffffffffff, R13: 0x7fffffffffffffff, R14: 0x7fffffffffffffff, R15» ': 0x7fffffffffffffff\n ' ' RFL: 0 x 0000000000000046, RIP: 0xffffff7f9d78d39c, CS: 0 x 0000000000000008, SS: 0x0000000000000000\n "" error code: 0x0000000000000000\n"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.60.11/ osfmk/i386/trap_native.c:168.

  Backtrace (CPU 17), Frame: Return address

  0xffffff85753c5e90: 0xffffff801b2dab52

  0xffffff85753c5f10: 0xffffff801b3cf1ba

  0xffffff85753c6070: 0xffffff801b3ecdff

  0xffffff857ef03d00: 0xffffff7f9d78b6d4

  0xffffff857ef03d30: 0xffffff7f9d78b7b4

  0xffffff857ef03d70: 0xffffff7f9d784ff1

  0xffffff857ef03e60: 0xffffff7f9d784690

  0xffffff857ef03f20: 0xffffff801b3d0459

  0xffffff857ef03f40: 0xffffff801b2f22fd

  0xffffff857ef03f90: 0xffffff801b2f27f0

  0xffffff857ef03fb0: 0xffffff801b3c9117

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  Not yet defined

  Kernel version:

  15.6.0 Darwin kernel version: Mon Aug 29 20:21:34 PDT 2016; root:XNU-3248.60.11~1/RELEASE_X86_64

  Kernel UUID: E349749B-3303-3DDF-959C-B5885A0E1F6E

  Slide kernel: 0x000000001b000000

  Text of core base: 0xffffff801b200000

  Text __HIB base: 0xffffff801b100000

  Name of system model: MacPro5, 1 (Mac-F221BEC8)

  Availability of the system in nanoseconds: 2574260790

  last load kext to 1721994094: com.apple.iokit.IOUSBFamily 900.4.1 (0xffffff7f9c576000, size 630784 addr)

  kexts responsible:

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: MacPro5, 1, BootROM MP51.007F.B03 12 6-Core processors, Intel Xeon, 2.66 GHz, 48Go, MSC 1.39f11

  Graphics card: card graphics NVIDIA Quadro 4000, NVIDIA Quadro 4000, PCIe, 2048 MB

  Memory module: DIMM 1, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Memory module: DIMM 2, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Memory module: DIMM 5, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Memory module: DIMM 6, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Memory module: DIMM 7, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Memory module: DIMM 8, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.4.6f1 17910, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en2

  PCI card: Graphics NVIDIA Quadro 4000, view controller, Slot-1 card

  PCI card: NVIDIA Quadro 4000, NVDA, Parent, Slot-1

  PCI card: pci1b21, 625, AHCI, slot-3 controller

  PCI card: pci1095, 3132, other Mass Storage Controller, Slot-4

  Serial ATA Device: HL-DT-ST DVD - RW GH61N

  Serial ATA Device: WDC WD1001FALS-403AA0, 1 TB

  Serial ATA Device: Hitachi HDS722020ALA330, 2 TB

  Serial ATA Device: Hitachi HDS722020ALA330, 2 TB

  Serial ATA Device: Hitachi HDS722020ALA330, 2 TB

  Serial ATA Device: Samsung 850 EVO 500 GB, GB 500,11 SSD

  USB device: USB Bus

  USB device: USB Bus

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB Bus

  USB device: USB Bus

  USB device: USB Bus

  USB device: USB Bus

  USB device: USB 2.0 Bus

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: USB 2.0 Bus

  USB device: USB 2.0 Hub

  USB device: USB DONGLE

  FireWire devices: built-in_hub, up to 800 Mb/s

  Crush Bus:

  Yes, very probably a memory problem when there is more than one bank error reports.

  9 banks of error reports

  Often see you also RAM disappear as you said "I noticed is that this is not show DIMM 3 or 4"»

• Need help in the development of different customized reports for SCCM 2012 using the Report Builder version 3.0

  Members of the Group of respected

  I need your urgent assistance to solve my problem, if someone who at least somewhat or large information please help me.
  My problem is related to SCCM 2012 and SQL server 2008.
  : - I have to develop a custom reports for SCCM 2012 for one of my clients. I have configured all the settings required for preparing the report, and I have examples of reports provided with sccm 2012.
  I get the problem while developing new relationships, if I have examples of reports that I have studied the corresponding reports. I don't get detailed information from the database to create query and get the desired result. As I have not idea of detail of this database structure in it.
  So I need help to create the query as I am new on this database.
  If anyone understand please give me help or link where I can build the report
  Thanks in advance.

  Forums for this product are here: http://social.technet.microsoft.com/forums/en-US/category/configurationmanager/