Cannot get to the menu screen stuck on the screen where it shows the airtime and choosing a wi fi network.

Similar Questions

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• Cannot get into the BIOS on my Portege R700

  Hello friends,

  I have laptop Portege R700-1321.
  1 year a go, I was updating my version of BIOS to 2.20 and after that I have cannot get into the BIOS!
  try a passer-by but noway :(

  When you press F2 after you restart the computer nothing add and put it back again.
  try to change ro F10 boot order but still just restart :(
  I need to change the boot order to install the new OS fresh and of course my BIOS setting.

  Please help me.
  If any body had a same problem or know how to fix it :(

  First of all you n t need to change the boot order in the BIOS if you want to reinstall the new system.
  You can press F12 all turn on/off the unit.
  Then a menu should appear where you can change the boot device.

• Occult video BIOS BIOS occult system and I cannot get into the bios?

  IT SAYS: System hidden BIOS Video BIOS with a shadow and I cannot get into the bios?  WHAT CAN I DO

  Hello

  Why you try to go into the BIOS (Basic Input Output System)?

  For the problem with the BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer for help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.

• When I open the games online I can't get into the game, and they will write check your firewall

  can you please answer

  When I open the games online I can't get into the game, and they will write chek your firewall

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  can you please answer

  When I open the games online I can't get into the game, and they will write chek your firewall

  Hello

  I'm sorry for the inconvenience, but I should be able to help.
  Internet connection issues are widely available and vary from one case to another. Your question, however it seems that the most likely cause is that your computer's firewall prevents your applications to connect to the internet. You can check this easily by:

  1. go to the Start Page of Windows 'default Page of Windows 8.

  2 mouse hover in the top right of the screen then click on the search"" button.

  3. type in 'Control Panel' after a brief search you will see a button at the top of the page left labled 'Control Panel' click on this button and you go in desktop mode and allow you to navigate in the control panel.

  4 from there, click on the tab labeled "system and security."

  5. then, click on the second option in the list titled "Windows Firewall"

  6. the first thing you want to do is to check if you are on a "private" or "Public network" (a private network is usually the safest and although on this type of network, you are less likely to be vulnerable to attacks, Public network are accessible by anyone and give a greater risk).

  7 the right it will say Private Networks Connected / not connected and below that it will say comments or connected/not connected networks public. Most computer security settings differ based on your type of connection, if you are on a network audience of settings on your computer will be more strict and could prevent your programs connected to the internet. (Say if you are connected to a private network, you can probably exclude this.)

  8. If you are connected to a private network and your programs don't always work correctly in the top left of the window under "Control Panel Home" you want to click on the option "allow an app or feature through Windows Firewall."

  9 a list first your "Internet Capable of programs" quickly browse and find that you are having problems with and take note of the checkboxes next to them. If no box is checked, you will want to allow them to connect. Do this by clicking on the "Edit settings" button located in upper right

  10 you want then allow your program through the firewall, this by simply checking the box next to it. (Note that if the Public network that can leave your computer vulnerable or higher risk)

  11 after doing this click ok, now go back and try to run your program and see if the problem is resolved.

  12. If you cannot find your program, click the "Allow" another app... button and navigate to your programs (usually in the folder C: / drive in the folder programs.) and choose your program and adjust the settings to allow through the firewall.

  13 if this does not solve your problem, and the problem persists, try to go into Internet Explorer, by clicking on the gear in the top right and open Internet Options. Go to the Security tab and check how strict your settings are. You should be able to click on "Reset to Default" to solve this problem, if that's the problem. (Located at the right bottom)

  I hope that this helps if not let me know and I'll give you some suggestions.

  Thanks for your time, I hope this has helped.

  -Ian

• I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  Hi gullo56,

  Welcome to Microsoft Answers Community Forums.

  To help you better I would ask,

  a. If it functioned very well under Windows 7 before?

  ·         I suggest you to disable your firewall security software and check if you are able to play the game.

  From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

  1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

  For information about how to run a program in an earlier version of Windows, visit the link below,

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  2. you can also try to reduce the hardware acceleration and check if it solves your problem,

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  --------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• Reactivate microsoft reader, but when I get on the site and I try get a 500 Server error

  Original title: 500 Server error.

  I'll have to re-enable the drive of microsoft, but when I get to the site and try I get a server 500 error is it possible around that I have hundreds of books with a value of eBooks that I can't access

  Original title: 500 Server error.

  I'll have to re-enable the drive of microsoft, but when I get to the site and try I get a server 500 error is it possible around that I have hundreds of books with a value of eBooks that I can't access

  Problem solved by other means.

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Cannot get into the bios of the start screen.

  Well I had run into trouble with my video card, and it had to be replaced. Before I do that but I was invited to try a system recovery to get rid of any possible program that was at the origin of defective symptoms of a video card.

  Well, I replaced the video card and everything has been fixed. But... because of the recovery of the system, some of my settings changed in Bios is returned back to default. I remember specifically in the Bios to disable the action keys (Fn + everything related F who did something).

  Problem is now I can't return to the Bios to change the settings once more.

  In order to dispel some of the suggestions more simple I tried already:

  Using another keyboard (allows me to enter the Setup program, reinstall system, diagnostics, etc. very well but not Bios)

  Unplug everything in the back, but the monitor and keyboard

  Erased from the memory CMOS, which led me to a screen saying that my Bios is set by default and to go to the configuration, press F10. But by pressing F10 led me to the single configuration screen and couldn't get into the BIOS.

  I carefully searched the internet to find answers for this problem, but I really hit a dead-end.

  I want to say I know that I've changed before setting on this computer it's just that I don't remember how. I mean I tried F1, F2, Del, Ctrl + Alt, and everything inbetween for shortcut keys enter the BIOS nothing helped.

  Thanks in advance for your reply eagerly to receive a response.

  Oh and I have a HP Pavilion Slimline s5260f, if that helps anything.

  Well fiddle with stuff I have solved my problem. Thing, it's actually, I couldn't have what I wanted through the BIOS screen. I remember he made on my friends computer to get rid of it, where their BIOS had more options.

  As for anyone with my problem (hit accidentally the Fn and the sleep button) I recommend that to go in Control Panel Power Options - then select doing nothing to hit the Sleep button.

• Installation of POS, cannot get past the initial Setup screen.

  I have configured the DNS and tested resolution, all the names and the IP addresses of resolve. Stars of /etc/resolv.conf and I still get the same error. Anyone know of a solution for this?

  Turns to me, the problem is with the host name. Just put in POS instead of vdp.steelnework.com. In the field of domain in your domain. You can check out this video VMware vSphere 5.1 - install and configure - YouTube Data Protection

• 10.2 exasperating IOS - cannot get rid of lock screen notifications or phone calls end

  Hi all

  I hate the new update!  Mainly due to the following question: my lock screen insists to show me the notifications I don't want - next Up, showing what I then in my diary, the Siri app suggestions and news.  I thought it would be simple to disable in the settings, BUT it does not work!  In my settings, news notifications are turned off completely, but still they appear (and Yes, I tried turning market!)  I have no interest in the next place, and cannot turn off anyone.  The Siri is ok - little useful and the same as what was there.

  The other issue particularly infuriating is that the block of additional notifications to the wide space on the phone's screen and I can't see what I'm doing.  In particular, if I'm on a call for long enough for the kick lock screen, for me to put an end to the appeal that I need move these notifications in the way that, slide or press the home button, which takes time. I do not understand why this is happening - surely if you are on a call the lock screen shouldn't come?

  So 2 questions: 1. How can I remove the undesirable elements of the lock screen and 2. How can I prevent the lock screen suddenly to avoid end me a call

  Thank you very much!

  Let's first answer the simple question:

  Clairelfc wrote:

  In particular, if I'm on a call for long enough for the kick lock screen, for me to put an end to the appeal that I need move these notifications in the way that, slide or press the home button, which takes time.

  This is not correct.  To complete a call, you can simply press the sleep/wake button!

  Regarding then until the next, etc...

  Simply scroll to the bottom of the screen (that starts with 'To the top next' and click on change it.)  Then, you can move or delete what you want.

• Cannot get into the BIOS of the Satellite Pro 4340 due to non-functional keyboard

  I seem to have changed some BIOS settings that cause the keyboard no longer works.
  If I press ESC when you start the computer, I get the message waiting "verification system. Then press [F1]. »
  However, pressing the F1 key does not bring me anywhere. I'm stuck.
  If I do not press anything at startup, start the computer normally in Windows, but the keyboard does not work.
  Any suggestions?

  To access the BISO you must first press ESC then F1!

  Then the BIOS should appear. In the BIOS, please set the defaults and don t forget to save it. That s all and this should help!

  Concerning