Need help to determine what equipment to use
I will conduct experiments of velocimetrie by image of particles on a rotary pump. A camera needs to take several pictures of the pump only when it is in a certain direction. The pump will turn somewhere around 5000 rpm, and an encoder transmits an impulse via TTL once every revolution. Setup of camera/laser receives through TTL and cannot operate less than 15 Hz, so I need to build a facility that can receive this signal high frequency encoder, reduce at the maximum rate authorized by the camera, then exit to trigger the camera. The system should work with a laptop.
I know I'm a little foggy on the technical details, but I hope someone can give me an idea of what equipment (chassis, modules, controller) I need. Thanks for any help.
Depending on how fast you want to taste and how much resolution you would like, we have a different family of cards you can choose from.
M series
http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/14114
Tags: NI Hardware
Similar Questions
-
Need help to determine what caused several outbound connections domain workstation
Need help to determine why my workstation area all of a sudden (in the last 4 days) seems to be launching many connections coming out of remote addresses of dllhost.exe.
So far, I scanned the machine in safe mode with Malwarebytes, Malwarebytes Antirootkit, Superantispyware, Rootkit Remover (McAfee) and various other applications of identification or remove malware without success. The machine seems to be clean of malware.
I use Sysinternals Process Explorer to view the file in question, but I can't determine how it is running. The file at the bottom of the screenshot below is the file in question. I've suspended in this shot, or there could be dozens of dllhost.exe initialized below the first.
Using tcpview from Sysinternals shows that the process to connect to several remote IP addresses which, in many cases, are not identifiable via whois (or I do something wrong, which is quite possible).
Is it possible to determine what triggers the executable which, in turn, seems to be calling outbound connections?
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
need help with my screen has been using mouse and the screen is smaller and smaller
need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see
Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out.
-
I need help to know what to buy. How can I chat with a salesperson from Adobe?
I need help to know what to buy. How can I chat with a salesperson from Adobe?
Hi nappaland,
You can check this link: contact us | Adobe
Kind regards
Claes
-
Need help to determine the material for VMServer
Hello
I'm new to VMServer and I was hoping I could help determine what kind of material, I'll need to buy to run guests.
I run 2-4 versions of windows at the same time on the host machine, with several more in offline (and according to the needs of switching).
These would run a single application with very modest network traffic and low demands of cpu/memory/disk.
I would like to than the ability to run 64-bit operating systems.
Please let me know what would be recommended. Thanks in advance.
Welcome to the community,
first of all I recommend you take a look at VMware vSphere Hypervisor (ESXi) rather than VMware Server, since VMware Server has been declared end of availability January 2010 and the end of general support will be next month (see http://www.vmware.com/support/policies/lifecycle/general/index.html)
If you want to use in the production, I highly recommend you choose a host system that is supported by VMware (see http://www.vmware.com/go/hcl)
André
-
I need help to understand what product I need
I've used Acrobat Reader only, not any pro version. There are a few things I want to be able to do: modify a pdf file and create my own form for certain things. I really don't know what would be the best program. I would not make any what else I can same fantisize and arrive at something else for which I might need it.
It might be useful to give some info about my level of 'tech '. I'm on Win 7 Pro [not because I wanted to spend XP] that must be customized as my win98. I don't do much on the web, for the most part I get by e-mail. I always use CorelDraw / Corel PhotoPaint 8 for any art said I could do [Yes, it will work on Win 7 great]. My cell phone is 2004. So, really I can't think of something that I have to be able to do at hand to do interactive forms and power edit pdf files sometimes.
Thanks for any help and suggestions. I have no idea what some of these things are like the DC version or what it is.
Ruth
I should put this in my first post. I'm sorry.
Here are the differences between the Standard Acrobat and Acrobat Pro. You can flick it to see if it has everything you need to Pro which is not available as Standard.
-
Need help to resolve the query by using analytic functions
Hello
I need help to solve this problem, I tried an analytical function but could not solve the problem.
I have three table as illustrated below the table is filled with a flat file. The records are arranged sequentailly based on the name of the file.
The first record of the game based on EIN goes to TAB_RCE
the following records then goes to TAB_RCW
and last save of the game based on EIN goes to the RCT table
How can I make groups and
assign a
EIN * 12345 * line number * 02, 03, 04 * in the table TAB_RCW and * 05 * in the table TAB_RCT
EIN * 67890 * line number * 07, 08, 09,10 * in the table TAB_RCW and * 11 * in the table TAB_RCT
and so on...
Thank you
Rajesh
TAB RCE_--------------------------------------------------------------
LineNumber EIN FILENAME TYPE
-----
01 12345 ABC NCE. TXT
06 67890 ABC NCE. TXT
12 76777 ABC NCE. TXT
-----
TAB_RCW
-----
LineNumber TYPE SSN FILENAME
-----
02 22222 ABC RCW. TXT
03 33333 ABC RCW. TXT
04 44444 ABC RCW. TXT
07 55555 ABC RCW. TXT
08 66666 ABC RCW. TXT
09 77777 ABC RCW. TXT
10 88888 ABC RCW. TXT
13 99998 ABC RCW. TXT
14 99999 ABC RCW. TXT
-----
TAB_RCT
-----
NAME OF THE FILE OF TYPE LINENUMBER
-----
RCT 05 ABC. TXT
RCT 11 ABC. TXT
RCT 15 ABC. TXT
-----SQL> with TAB_RCE as ( 2 select 'RCE' rtype,'01' linenumber, '12345' EIN,'ABC.TXT' FILENAME from dual union all 3 select 'RCE','06','67890','ABC.TXT' from dual union all 4 select 'RCE','12','76777','ABC.TXT' from dual 5 ), 6 TAB_RCW as ( 7 select 'RCW' rtype,'02' linenumber,'22222' ssn,'ABC.TXT' FILENAME from dual union all 8 select 'RCW','03','33333','ABC.TXT' from dual union all 9 select 'RCW','04','44444','ABC.TXT' from dual union all 10 select 'RCW','07','55555','ABC.TXT' from dual union all 11 select 'RCW','08','66666','ABC.TXT' from dual union all 12 select 'RCW','09','77777','ABC.TXT' from dual union all 13 select 'RCW','10','88888','ABC.TXT' from dual union all 14 select 'RCW','13','99998','ABC.TXT' from dual union all 15 select 'RCW','14','99999','ABC.TXT' from dual 16 ), 17 TAB_RCT as ( 18 select 'RCT' rtype,'05' linenumber,'ABC.TXT' FILENAME from dual union all 19 select 'RCT','11','ABC.TXT' from dual union all 20 select 'RCT','15','ABC.TXT' from dual 21 ) 22 select rtype, 23 last_value(ein ignore nulls) over(partition by filename order by linenumber) ein, 24 linenumber, 25 ssn 26 from ( 27 select rtype, 28 linenumber, 29 ein, 30 to_char(null) ssn, 31 filename 32 from TAB_RCE 33 union all 34 select rtype, 35 linenumber, 36 to_char(null) ein, 37 ssn, 38 filename 39 from TAB_RCW 40 union all 41 select rtype, 42 linenumber, 43 to_char(null) ein, 44 to_char(null) ssn, 45 filename 46 from TAB_RCt 47 ) 48 order by linenumber 49 / RTY EIN LI SSN --- ----- -- ----- RCE 12345 01 RCW 12345 02 22222 RCW 12345 03 33333 RCW 12345 04 44444 RCT 12345 05 RCE 67890 06 RCW 67890 07 55555 RCW 67890 08 66666 RCW 67890 09 77777 RCW 67890 10 88888 RCT 67890 11 RTY EIN LI SSN --- ----- -- ----- RCE 76777 12 RCW 76777 13 99998 RCW 76777 14 99999 RCT 76777 15 15 rows selected. SQL>
SY.
-
Need help to determine which catalog use
I transferred everything from my old Mac to an external hard drive a few months back and now I need to transfer it to a new computer. I have two files distinct .lrcat
Lightroom Catalog.lrcat 27 February 2016 721.3 MB
5 Lightroom Catalog.lrcat 9 February 2016 MB 723,7
I did not use LR since backup catalogs, and I'm not quite clear on which is the correct catalog. I think that the newest, although curiously, the oldest is larger in file size. Anyone has any ideas on this? What version of LR this catalogue belong to Lightroom Catalog.lrcat
Thanks for any help
LR CC/6 is out for about a year. He started with LR CC 2015.0 (LR 6.0) and is currently at 2105/6 5.1.
The desired catalog is CC, Lightroom Catalog.lrcat.
You might want to consider renaming it to Lightroom Catalog.lrcat of CC - 6 so you don't get confused in the future. Once rename you it with the program of file manager for all your BONES, you have to do is either double-click on it or once LR is open, select file > open catalog and open that has renamed the file catalog.
-
Hi I need help to uninstall Windows xp by using the F keys.
My question is the same as above, I can not understand how to uninstall windows xp with the F keys or if I should go to Mode without failure before I can do like that please help me. I checked the places of response and they tell you a whole different way in this way and I tried but it won't work. I also tried to restore my computer back before that I was thinking when I got the Virus, but that only goes so far I'm crazy to go. Please help me I need my computer for work.
Thank you very much
Thank you
auntsands50,
Thanks for posting on the Microsoft answers Forum. I need to get the details on your situation. You say that you want to uninstall XP? It will be the only way to install another operating system or use a program that will allow you to erase the hard drive. You mention that you got a virus and you tried to do a restore.So my question is what are you trying finally to accomplish? Do you want to just get a virus on your system or you want to wipe the drive and reinstall XP.
If you want to remove a virus, then here is a link to a program free antivirus that you can use to help clean your system: http://www.microsoft.com/Security_essentials/
If you want to restore your system to factory default then you will need to boot from your XP cd or use the OEM solutions provided with your PC. http://support.Microsoft.com/kb/316941 Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I need help to retrieve my hard drive using the recovery of Neosmart disk (it takes days)
To get a better perspective, I'll tell you the history of what has gone wrong.
What happened is that the computer has a virus and it changed some coding on the computer. When this happened to that my computer wouldn't let me enter my account and the only account that I could go on was the administrator account. I tried on a few websites and the other microsoft Web sites told me to do something with the command userinit or something like that, which led to the black screen of death that I managed to fix it on my own.
Another website told me to use the recovery disk but like a lot of people that I don't have a recovery disk, I only had a reinstallation disk that said I could fix the computer, but it would delete all hard disk that I didn't, I need the intact files because they are important to my family.
Then I discovered on the recovery disk that you can buy from Neosmart.com and this disc is made like the original Vista recovery disk. Anyway I bought it and I clicked on "Automatic repair" and it comes up with 2 dives eligible for recovery (it says at the top) a player is 10 GB and the other is 288 GB (it says active is the 288 GB we) I clicked on repair automated on one of them, but I don't remember. Apparently fixed it (coding I guess) and I restarted but no consideration was there. He says "Please wait" for a long time, then it comes up with a single account that says "User" I click it and it says user name and password you will need to connect to a computer at school or something. I put my username and password anyway and it does not of course and it comes up with "the specified domain does not exist or could not be contacted.
So, I went back on the recovery disk and I so I click on system restore to get my stuff back and I can put it on a previous date until the virus has arrived and I click on it, then it is said that his recovery, files, but just like that, I let him recover and he was recovering for 3 days before I came on this site and tried something but it did not work. Like I said before it is 288 GB so I guessed it would take a long time to recover only the amount of data, but it seems just silly.
Could someone please help me with this with words that I can identify the disk recovery Neosmart.com please
Important additional information
I said before that I don't remember what I have fixed drive, the thing is that there might be I have set the wrong drive, but to be honest at this point, I feel like if I do a movement without knowing what it will do, im going to lose what's on that hard drive
Important files are not for work, they are files containing family photos of many years we couldn't print on paper of good quality printing. There is no other copy of these pictures and I really want to keep them, even with my parents.
The recovery of Neosmart disk contains the following options
- Auto repair
- Score editor
- Browse/Backup of files
- Internet browser
- Launch the command line
Within the Automated repair is where you can get the system restore. The others you can kind of guess, if you want to know so just ask.
Help, please
Thank you
To recover the photos, you can remove the drive and it slave on another computer (you can get very cheap external envelopes) and remove your data (you have just learned an important lesson in why you need to have backups).
Once you have saved your data, your best bet would probably be to reinstall. A good Web site for the removal of malicious software is that one.
http://www.selectrealsecurity.com/malware-removal-Guide/Good luck!
-
Need help to determine the right router to buy for satellite internet
I have satellite internet service and that you have recently acquired a 2nd computer for my child. What is the best wireless router purchase? We do not have game systems or other wireless equipment.
I have a WRTP54g that I used when I had a modem cable and VOIP, but I don't have a home phone and the router slows down my internet experience horribly with the satellite service!
Do I need a new wireless router, or can I work with it?
Thanks in advance.
To upgrade the firmware of your router, you can follow this link.
-
Need help to determine which partner is then can buy credits newsletter
I need to buy more credits newsletter but the person who initially set up my site does not log in information from the partner portal. How can I know who is the partner who has set up my site and how to connect to buy more credits?
Identical to what they use to connect to the admin.
There is a small arrow that set for an account partner on the logo and a link will be there to go to the partner portal
You can contact live chat via the support link or the button here: status of BC
But if you want to go under the wing of a partner with a bit more support, we are always welcome people and helping them with BC, digital marketing etc and problems solved quickly through BC, we can get - you can drop brett to prettydigital.com.au an email.
-
Determinations - what wsdl to use Server
If there is a project of takeover as a webservice in the servers of determination, there are several WSDL to the choice:
/ server9000/evaluate/SOAP/specific determinations / [project]? WSDL
/ the determinations-server9000/evaluate/SOAP/generic / [project]? WSDL
[/ determinations-server9000/assess/SOAP/specific/10.4/[Project]? WSDL
[/ determinations-server9000/assess/SOAP/Generic/10.4/[Project]? WSDL
[/ determinations-server9000/assess/SOAP/specific/10.3/[Project]? WSDL
[/ determinations-server9000/assess/SOAP/Generic/10.3/[Project]? WSDL
[/ determinations-server9000/assess/SOAP/specific/10.2/[Project]? WSDL
[/ determinations-server9000/assess/SOAP/Generic/10.2/[Project]? WSDL
[/ determinations-server9000/assess/SOAP/specific/10.0/[Project]? WSDL
[/ determinations-server9000/assess/SOAP/Generic/10.0/[Project]? WSDL
[out of the wsdl for the interview on the left]
The difference between specific and generic is explained in the guide of the developer, but then? Should I use a wsdl without version number of OPA or the wsdl 10.4 (we use 10.4.2)? It obviously has something to do with retro compatibility, but what is the reason to be exact it?
Thanx, Philip.Philip,
Interfaces with version numbers exist for backward compatibility, so that you can continue to run your web service client compiled in new versions of the OPA. You may not use these unless you have an existing customer, built for an earlier version of the OPA.
Services to evaluate without versions are the latest version and is the recommended version to use
Generic vs specific
As well the generic and specific to provide the same service, however, the interfaces are different and you can use either one depending on your needs.
The generic service creates the same for all rulebases web service. Relations, attributes, and the entity instances are specified using a generic format for example:
13 ... The service creates a web different services for all rulebases. The xml code is configured to match the names attribute and the relationship of the entity.
13 ... A quick list of the advantages and disadvantages.
-The generic wsdl does not change with modifications of the modules, or even when using different rulebases. A customer has no need to be recompiled due to changes
-Specific Wsdl changes when you change the entities attribute relationships in the modules and using different rulebases. A customer must be recompiled due to changes
-In the generic service, if you are not using the correct id for your attributes / features, you can get errors.
-In the specific service, the attribute ID of the entity are all contained in the wsdl document and so her harder to make a mistake.
-The specific service makes more sense to a service like BEPL that expose a GUI for web mapping servicesFor more information, search for: "Evaluate the Service" and "specific vs generic data model" and in the Guide of the developer of automation Oracle policy (http://docs.oracle.com/html/E38272_01/toc.htm)
-
Need help to find what is REALLY to my advantage?
I bought what I said was a ThinkPad Edge 530, with a processor i5, 6 GB of memory, a numeric keypad and running @ 7 200 RPM. When he arrived, he had not the numeric keypad. The seller told me that the keypads were not available at the edge. (Strange, the same one @ Costco was one in the picture... Then he told me it is available in a month after I purcahsed mine as well as all the brochures Lenovo just had the edge. s in the picture like that! Oh MY!)
I have problems with the load. The battery icon at the bottom left shows 95% available, hip; no charging in progress". The seller sent to the manufacturer for me (at the same time charge me over $ 100!) and when I came back, nothing has been fixed.
I called IBM on the problem and inquired about the keyboard... The pavement WAS available when I bought my pc! So, I thought-lied to me once... I asked what was the 'courage' of my pc. It has 4 GB of memory and is running @ 5 400 rpm.
IBM said it was even not an E530, but an edge of 15...
Lenovo said they have never heard of an edge of 15, that it IS an E530 (this is what is on my invoice)
I asked Lenovo where I can find what is in my SPECIFIC laptop, and they tell me that they cannot help me. I know that I can (and have) entered my pc in 'Computer' and click right, etc... But, I need a print out of the company itself; take either the seller or the Court.
Can someone please give me a link? My ThinkPad type 0319. Of course, I am a computer novice, or I wouldn't have gotten into this situation! It won't happen again. I appreciate any assistance. Thank you very much!
Note of the moderator; s/n, edited for the protection of its own
Edge 15 is not an edge E530. Edge 15 has been replaced by Edge E520, then edge E530. But it is still sold in the market of NA, a spec like you shouldn't cost more than $ 500 (closer to 300 or 400 is better like that) at most.
Only 15 flight attendants had not the keypad, the Edge E520 and E530 times had on the numeric keypad.
You can download a software called HWinfo32 from the web, and it will tell you the exact specification of your machine, i.e. CPU.
The seller is you ripped off as a crook, and the support of IBM technology has no idea what he said.
http://www.ThinkPads.com/wp-content/uploads/2010/03/Lenovo_ThinkPad_Edge_15.PNG <---- edge="">---->
http://www.bitdynasty.com/images/comparison/notebooks/Lenovo/Lenovo-ThinkPad-edge-e520d.jpg <--- edge="">--->
http://www.laptopreviews.com/wp-content/uploads/2012/05/IMG_0470-001.jpg <--- edge="">--->
Here is the official list of specifications of the laptop Edge series:
http://www.Lenovo.com/PSREF/PDF/edgebook.PDF
Note that the edge 15 would have the first generation I core CPU:
I guess you have to be the next CPU:
1 i3-380 2.53 ghz
or2 i5-540 2.53 ghz.
Two of these CPUS were used in the on-board computer 15 (they are called Arrandale CPU), Edge E530 use Sandy Bridge or Ivy Bridge CPU.
-
Y at - it a file or a registry key that will help me determine what is installed.
I'd like to enterprise-level Reader and Acrobat STD and PRO wide. We have Standard or Profession player has installed systems. If I build the push to go to the reader I can grasp o the name of the exe file. However, Std Acrobat and Acrobat Pro use the same named EXE. I'm looking for a file or a registry key that I can press to determine if Acrobat Std or Pro is installed on the system.
Thanks to advabnce for your assitance.
I have installed X Trial Pro and I was able to isolate
HKEY_CLASSES_ROOT\Installer\Features\68AB67CA3301004F7706000000000050
Professional AcroHelp_
I bet it's AcroHelp_Standard for the Standard versions. I think it's
what you're looking for? Does that help?
Maybe you are looking for
-
Question about Windows XP CD home for Satellite A105
I have an A105 Satellite and recently it started running very slowly. With most of my machines I would wipe and rebuild them (all my data is backed up) but I don't have a CD Windows XP Home (it didn't is come with the laptop such as Windows has been
-
at this point, I'm lostI ran microsoft fix convenience store and identified the firewall problem, she had no solution to the problem
-
Impossible to delete file from office
Using Vista Ultimate SP2, I have a file that I downloaded from an FTP site customers who have not completed the download. Now I can't delete it. If I just right click on the desktop and select Remove, or more, it gives me the "time remaining: calcu
-
BlackBerry Q10 think about upgrading 9900 to Q10 - have 2 accounts Office 365 - all problems
Currently have a 9900 and am evaluating whether to upgrade to a Q10. Carrier through TMobile, with BBCS in Office 365 e-mail accounts and one account Office 365 by TMobiles BIS. What I give myself to understand, Q10 works with EAS, how it works with
-
Pavilion Elite m9650f will not boot
So my m9650f HP Pavillion that use us as a server and never turn off except for maintenance and upgraddes worked well for 20 months. Last night there was a power failure, and since it does not start. When I turn it on all the lights and the fan comes