Y at - it a file or a registry key that will help me determine what is installed.

Similar Questions

• Y at - it a registry key to check if the current user can install a windows updates? also, what registry key that is used to verify whether a user is an administrator or not. Thank you...

  Y at - it a registry key to check if the current user can install a windows updates? also, what registry key that is used to verify whether a user is an administrator or not. Thank you...

  There is no need to check the registry keys to see if you can install updates or not.

  You just need to be connected to an administrator account to install the Windows updates.

  You can check if you are in an administrator account by trying taks simple administrattor. For example. Try to change the time system.

  If you can change the time, you are an administrator; no other.

• What are the security risks by allowing a program to change the registry keys in Windows 7, without knowing what are the changes?

  Original title: security risks by allowing a program to change the registry keys in Windows 7, without knowing what are the changes?

  What are the security risks by allowing a program to change the registry keys in Windows 7, without knowing what are the changes?

  Hello

  If you had made any changes in the registry without taking the backup copy of the registry, then there could be chances that your computer can find themselves in no situation to start and finally end up in the reinstallation of the operating system; This is why it is recommended to take a backup changed in the register of representation.

  Before editing a registry key or subkey, we recommend that you export, or make a backup copy of the key or the subkey. You can save the backup copy to a location that you specify, for example, a folder on your hard drive or a removable storage device. If you make changes that you want to cancel, you can import the backup copy.

  . Are what program you referring?

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Error - "Launcher requires the write permission for World of Warcraft key to locate and launch the game successfully. Please turn on write access to the registry key with the help of an administrator account"

  Original title - edit registry of the world of Warcraft Launcher to write

  I downloaded the patch more recent game in my computer, I did a cleanup of the system and tried to log in again, but now the States window it "(Launcher requires permission in writing for World of Warcraft key to locate and launch the game successfully." Please allow write access to the registry key by using an administrator account)", how can I access the registry to resolve this problem? Help please

  Hello DaTurtle !

  I had exactly the same problem, I have not found the sollution here...

  But I found how to fix very easy !

  You do a right click on the WOW icon at the office-
  then browse to the location of the file -
  It will appear a lot of files-
  Click on the WoW program file instead of the pitcher-
  will start your wow game-
  Log in as normal-
  then he will come to the top to update...

  After the update your wow will work as usual!

  It worked on my computer, please respond!

  Hans_Craft

• My computer does not start because of registry keys that have been accidentally deleted. What should I do?

  Some registry keys have been removed cleaning my computer from a virus. My program was a little too vicious in the cleaning process and remove some vital for windows key to operate. Now, whenever I start my computer, it says that it cannot, looking for the error, said that he has found and cured, then shuts down. Then I turn it back on, and it goes through the new. How can I put the key to register back where it is supposed to be without my computer turning off while I'm?

  You can if you start on the installation or a recovery disc and initiate restoring of the system in the environment of these discs recovery.  If you have no records, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (although you need to drive on a computer of differentt).  Then boot on the CD on the computer of the problem.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  The disk does not usse the computer OS so it does not matter if the system does not normally or in safe mode.  He must always use the disk and these options should still be available from the disk.  Among the options on the disk, you can try the system restore and if that does not work then you can try the Startup Repair.  There are other options, we can try from the disc, but let's just try these for starters.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I received an e-mail with a .pub file that will not open. What should I do to open it?

  I am running windows vista and cannot open a file .pub into e-mail. He tells me I need to create an association of game to designate a program to open it, but I don't know how.

  You need Microsoft Publisher to read a .pub file, but you can convert a PDF online here.
  http://en.kioskea.NET/FAQ/1178-reading-a-pub-file-without-Publisher
   
   
  Or get a viewer here.
  http://en.kioskea.NET/s/pub+reader?qlc#k=bd39a7c61cafe5f5bcf3f98392f40c11
   
   

• InDesign file layout of a newspaper that will print and fold easily

  Hello

  I would like to make a model of a 20-page newspaper (therefore 5 double-sided sheets of paper that are folded). I want to build the model in InDesign so that I can easily make changes to my comp as needed. The * real * newspaper is printed on tabloid, but my comp, I'll just be printing on normal 8.5 "x 11".

  My printer can do double-sided printing, when I print my Mock up for example, Pages 8 and 13 will be on one side, Pages 14 and 7 on the other. But when I'm editing the file in InDesign, I would normally consider:

  1

  2 3

  4 5

  6 7

  etc...

  18 19

  20

  Is this possible? I have a knowledge base of InDesign, so need clear steps on how to do it. Or if someone can direct me to a model line in files or e-mail to me working too .

  Thank you!

  ALWAYS make your layout in readers spread as against simple pages, so for a tabloid sheet that folds in half for letter you would be set up as a letter in portrait mode. If your folded paper uses two tabloid pages has joined on the long edge, set up in the tabloid facing pages.

  To impose in printers, spreads, you can either use booklet print to print directly to the printer or print in PDF format (if the Virtual PDF printer is installed and that you are on Windows or Mac OS X before Snow Leopard) or by printing to Postscript queue and distillation, or you can use a script to organize pages, and then export the "spreads" in PDF format.

  You can easily scale pages to fit the printable whole sheet area when you print the PDF file.

• I am looking for a software that will help me to clean up my computer and get rid of the files that are basically take place and causing my computer to run slowly.

  My computer is running slowly. Sometimes, when several programs are open the computer will just restart. I ran a free program offered by Gateway but do not know if the program does what it says it will and I don't want to pay for something that probably just convinced bridge their product works and gateway could recover a kick to it people buy.

  Hello

  I suggest that you click on the link provided below to optimize Windows XP computer for better performance.

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Note:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Trojan files to the registry affect my computer's performance

  Original title: the files in the registry

  I recently found three Trojan horses on my computer: Trojan.Maljava; 1gmyws.sys (Hacktool.Rootkit); and gr1.exe (Trojan.FakeAV! gen29).  While the Trojans have 'disappeared', they did not leave behind some residual files that affect my computer's performance.  What I need to know: in my registry of digitization, XP sp3 there files in the directory record win %?  I think that these files must be deleted, but I'm not sure.  You can provide any help would be great!

  Because you cannot use the scanner please check the following steps that will help

  If you have no security (anti-virus software) software installed on the computer, and then install Microsoft Security Essentials and run a scan complete:

  http://www.Microsoft.com/security_essentials/

  If you already have a security software on the computer, then try to run the following tools to remove the malware:

  http://support.kaspersky.com/downloads/utils/tdsskiller.zip -Kaspersky TDSS killer &

  ftp://devbuilds.kaspersky-labs.com/devbuilds/AVPTool/index.html - removal of Kaspersky AVP tool

  Touhami

• Cannot write to the registry key for Acrobat XI - Error 1406

  Hi all

  I have a problem regarding the installation of Adobe Acrobat XI 11.0.07 on a laptop with Windows 7 Home Premium OS.

  In short, I cannot complete the installation of Adobe Acrobat XI on this machine because Acrobat is not able to write the value to the registry key that is located here:

  HKEY_LOCAL_MACHINE-> SOFTWARE-> Microsoft-> Internet Explorer-> toolbar.

  I tried to find solutions on the internet and found a Web page on the Adobe Forums, which is this: Error 1406.Could not write the value Adobe ARM - and it was not very useful, since the person requesting to solved his problem, but did not say how he did. So, I found this page using Acrobat, called Error 1402. Error 1406. Acrobat, Reader where I tried different solutions, but so far none of them have worked. What I did to remove all previous versions of Adobe Acrobat, Reader, Air and so on. In fact, I deleted all Adobe software, in which case one of these programs were to blame, but it did not work. Before that I have deleted all this software, I deleted Acrobat and Reader several times, but you have probably already found, it did not work. As it did not work, I tried the following solution using Acrobat, which was to 'Set permissions to their default values in the registry'. I followed the solution completely and does what he says, but it did not work. As a note, I must say that the type of registry key with that I have a problem called 'Locked', is a REG_DWORD type and the data value is (0). That this has something to do with it? I'm not too familiar with editing the registry. However, I tried to change the value of (1) and updating the registry, but it did not work...

  More information: However if I install the full version of Adobe Acrobat XI or the default installation, the same error pops up: Error 1406. I scan my system with my antivirus Bullguard software, to see if there is no virus. There are not. Also, I closed my antivirus software and turned off the firewall of Bullguard, but this was not successful either, I did a scan of my system using cmd as administrator (sfc/scannow) and the program found a few mistakes, he could not fix. As far as I can see, he finds three files .dll with errors. I have the document called sfcdetails.txt if it would be very useful for you.

  In addition, I don't know what to do. I paid for Adobe Acrobat on 23 January 2015 and I failed to make it work properly again, and I can't update the software, because I have a problem with the registry. I am able to use the software for that I had to use it to so far, but I would like to be able to use it for what it represents and update in order to avoid any lapse in security.

  Thank you. I hope that you have some ideas for my problem and will be able to help me!

  Best regards

  Mads

  Hello Rahul,

  I found a way around the problem I described in the post. What I did to reinstall Adobe Acrobat XI and do not install the PDFMaker for Internet Explorer, and this solved the problem! And since I do not use Internet Explorer for PDF do, it's good for me, and now I am able to update to Acrobat. But for people who would like to use Internet Explorer for making PDF, it is of couse is not suitable... But for me it is. I still don't know how to solve this problem. It might have something to do with the fact that Adobe Acrobat XI is not able to support Internet Explorer 11, but this was written by a user on the Adobe forums, so I don't know if it's reliable. The "help Acrobat / compatible browsers and applications of PDFMaker Guide" immediately said that he made, but I'm not sure. Maybe it's a compatibility issue?

  in any case, thanks for the answer you gave - but I found myself

  Best regards

  Mads

• I get errors on my empty registry key

  I get errors on my empty registry key and I don't know what it is

  Edit by G225: I'm on Windows!

  Hi Clem,

  Please provide the EXACT error message and WHOLE Word for Word, including all codes.  When this error happen?  How many times does it happen?  When did start?  What version of Windows are you using?  This error occurs whenever you do something (If Yes, what is that something) or randomly?  Does it occur at startup or only after a certain time?  What exactly you do when the error occurs?  How will the error affect you (stop some programs or freeze the computer or force you to reboot or simply disappear and have no obvious effect)?

  More information we know, better we can help you.  As it is, we can do very little.  Please see the following can help you learn how to provide us with what we need to help you here: http://support.microsoft.com/kb/555375.

  Thanks and good luck!

• Error login as new user - no entry in the registry key "ProfileList.

  Hello

  I have Windows 7 Home Premium, SP1. I have several user accounts and have never had any problem creating new accounts before.

  However, I just created a new account, and when I try to log in using this new account I get the error:

  "The service user profile Service has no logon.

  A google search showed that he is a well-known and well-documented problem, so I started following the steps of KB947215. But I discovered that there is, in fact, no entry in the ProfileList registry key for this user. There are entries for all users, but not for new users I create. I can't find any other reference to this particular problem - everything I found online assumes that there is a faulty registry key that can be fixed and does not address the possibility that there is no registry key at all.

  Any help would be appreciated!

  Thank you!

  FCI

  Kiran,

  Even if your suggestions do not solve the problem, they provided me with the key to solve it myself - so thank you.

  Once I realized that it wasn't only the ProfileList registry key that was missing, but the profile itself, I could find that thread. Following the advice in this thread, I realized the following actions, which have solved the problem:

  • Log on as an administrator
  • C:\Users\Default right-click, then select Properties
  • On the Security tab, click Advanced
  • On the owner tab, click on edit, select the Admin user, select 'Replace the owner of subcontainers and objects' and apply
  • On the permissions tab, change permissions, select all the permissions of the current user, select 'Replace all permissions of child object with permissions inheritable this object', then apply

  (I did it in safe mode, because it was suggested on the other thread that might help... Although I don't think that it really made a difference in the end.)

  After these steps, everything seems to work fine once more. So it seems that something has updated some of the permissions in C:\Users\Default, and this is the cause of the problem.

  Hope that helps someone to solve the problem.

• How can I get a program or file on my USB key to open when I plug?

  I have a few files and programs stored on my USB key, and I want a file or program to open whenever I plug. What should I do?

  Use Bing or Google search for the terms "autorun.inf" and "AutoPlay" of research.  These should help you determine what are your options for the types of files you want to open.

• Registry key to disable/uncheck 'Use the graphics processor' Photoshop (Adobe CS6)

  Hello

  I'm disable/uncheck the option 'Use graphics processor' parameters of the graphics processor (Performance) for all users that connect to a computer. I tried to find the registry key that can do (to create a GPO for that) but without success. Anyone know if this is possible and what will be the registry key that I need to create/change in order to achieve this? Thank you!

  Maybe the DisallowOpenGLWindows_ON_D.reg from here will work.

  I think you just need to change the version of photoshop from 11.0 to 60.0

  11.0 is photoshop cs4

  60.0 is photoshop cs6

  Adobe - Photoshop: For Windows: Adobe Photoshop CS4 GPU optional plug-ins

• [Acrobat Reader DC] The HKCU registry key are not replicated for each user than Adobe Reader

  For Adobe Reader, all the registry keys that are added with the Adobe Customization Wizard are automatically added to each user. Unfortunately, it is not the same with Adobe Acrobat Reader DC.

  They have registry keys must be stored in HKEY_LOCAL_MACHINEWow6432Node\Adobe\Acrobat Reader\2015\Installer\Migrate to automatically add in the HKCU to the user at first launch of the application. But they are stored in HKEY_LOCAL_MACHINEWow6432Node\Adobe\Acrobat Reader\ [RegistryHiveName] \Installer\Migrate, as we can see on the screenshot below:

  

  The problem is probably one of the custom action. The registryhivename variable is not translated. I do not have a lot of research, but waiting on a solution from Adobe, I did a PowerShell script that move registry keys in the right place:

  Move-Item - Path "HKLM:\SOFTWARE\Adobe\Acrobat" [RegistryHiveName'] \Installer\Migrate\*'-Destination "HKLM:\SOFTWARE\Adobe\Acrobat" - force

  (PowerShell must be run in 32-bit)

  If Adobe can fix in the next release, !

  Hi, Maxim,.

  We recorded a bug for it and working on it.

  Kind regards

  Rave