Need help to export a header with slices to a web page

Similar Questions

• Need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012. It worked great, but after that I put an old hard drive on my PC (for 30 minutes - then I removed again) to get some information of this former, Lightroom now license application or try it for 30 days.

  I have not installed Lightroom on a new hard drive. He is always on the same hard disk. How can I now have my Lightroom to run again using my serial number and TAN? Need help to reactivate my old serial number and the number TAN.

  I use win 7.

  Duplicate thread: need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

• Need help to solve the problem with the margin at the bottom of the converted pdf file.

  Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?

  Hi jerrio1949,

  There is no way to change the margin, you settle back into your original file & then convert to PDF format.

  Kind regards
  Nicos

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• Need help to export results to csv format script

  Hi guys,.

  Need help, export results to csv can someone help me. Thank you.

  Connect-VIServer test

  $cluster = 'test '.

  $clustername = get-cluster $cluster

  $Clusters = get-View - ViewType ComputeResource |? Name - as $clustername.name

  $Clusters | % {

  $Cluste = $_

  $VMHostsView = $null

  $VMHostsView = get-view $Cluste.Host - name, Hardware Config, property

  $VMss = $clustername | Get - VM

  $HostCount = ($VMHostsView |) Measure - Object). County

  $VMCount = 0 + ($VMss |) Measure - Object). County

  $VMsPerHost = [math]: round (($VMCount/$HostCount), 1).

  $vCPU = 0 + ($VMss: measure-object-sum - NumCPU property). Sum

  $allocatedram = 0 + ($VMss: measure-object-sum - memorygb property). Sum

  $avgrampervm = [math]: round (($allocatedram/$VMCount), 1).

  $pCPUSocket = ($VMHostsView | % {$_.}) Hardware.CPUInfo.NumCpuPackages} | Measure - Object - sum). Sum

  $TpCPUSocket += $pCPUSocket

  $pCPUCore = ($VMHostsView | % {$_.}) Hardware.CPUInfo.NumCpuCores} | Measure - Object - sum). Sum

  $vCPUPerpCPUCore = [math]: round (($vCPU/$pCPUCore), 1).

  $onenode = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - 1 first | (measure - object - property memorytotalGB-sum) .sum)

  $twonode = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - first 2 | (measure - object - property memorytotalGB-sum) .sum)

  $onenodepcpucores = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - 1 first | (measure - object - property numcpu-sum) .sum)

  $twonodepcpucores = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - first 2 | (measure - object - property numcpu-sum) .sum)

  $totalclusterpcores_failover1 = $pcpucore - $onenodepcpucores

  $totalclusterpcores_failover2 = $pcpucore - $twonodepcpucores

  $TotalClusterRAMGB = [math]: tour ((Get-cluster $cluster | get-vmhost | % {$_} | mesure-objet-propriété memorytotalGB-somme) .sum)

  $TotalClusterRAMFailoverOne = [math]: round (($TotalClusterRAMGB-$onenode))

  $TotalClusterRAMFailvoerTwo = [math]: round (($TotalClusterRAMGB-$twonode))

  $TotalClusterRAMusageGB = [math]: tour ((Get-cluster $cluster | get-vmhost | % {$_} | mesure-objet-propriété memoryusageGB-somme) .sum)

  $TotalClusterRAMUsagePercent = [math]: round (($TotalClusterRAMusageGB/$TotalClusterRAMGB) * 100)

  $TotalClusterRAMFreeGB = [math]: round (($TotalClusterRAMGB - $TotalClusterRAMUsageGB))

  $TotalClusterRAMReservedGB = [math]: round (($TotalClusterRAMGB/100) * 15)

  $TotalClusterRAMAvailable = [math]: round (($TotalClusterRAMFreeGB - $TotalClusterRAMReservedGB))

  $TotalClusterRAMAvailable_FailoverOne = [math]: round (($TotalClusterRAMAvailable-$onenode))

  $TotalClusterRAMAvailable_failoverTwo = [math]: round (($TotalClusterRAMAvailable-$twonode))

  $TotalClustervcpuperpcore_FailoverOne = [math]: round (($vCPU/$totalclusterpcores_failover1), 2)

  $TotalClustervcpuperpcore_failoverTwo = [math]: round (($vCPU/$totalclusterpcores_failover2), 2)

  $newvmcount = [math]: round (($TotalClusterRAMAvailable/$avgrampervm))

  $newvmcount_failover1 = [math]: round (($TotalClusterRAMAvailable_failoverone/$avgrampervm))

  $newvmcount_failover2 = [math]: round (($TotalClusterRAMAvailable_failovertwo/$avgrampervm))

  $afternewvmvcpu1 = $vcpu + $newvmcount

  $afternewvmvcpu2 = $afternewvmvcpu1 + $newvmcount

  $new1vcpupcpuratio = [math]: round (($afternewvmvcpu1/$pCPUCore), 1).

  $new2vcpupcpuratio = [math]: round (($afternewvmvcpu2/$pCPUCore), 1).

  New-Object PSObject |

  Add-Member-pass NoteProperty 'NOMCLUSTER' $clustername.name |

  Add-Member-pass NoteProperty 'TotalClusterHostCount' $HostCount |

  Add-Member-pass NoteProperty 'TotalClusterVMCount' $VMCount |

  Add-Member-pass NoteProperty "of AverageVM / Host" $VMsPerHost |

  Add-Member-pass NoteProperty 'TotalClusterpCPUSocket' $TpCPUSocket |

  Add-Member-pass NoteProperty 'TotalClusterpCPUCore' $pCPUCore |

  Add-Member-pass NoteProperty 'TotalClustervCPUCount' $VCPU |

  Add-Member-pass NoteProperty ' TotalClustervCPU/pCPUCore' $vcpuperpcpucore |

  Add-Member-pass NoteProperty "TotalClustervCPU/pCPUCore after 1 failover" $TotalClustervcpuperpcore_FailoverOne |

  Add-Member-pass NoteProperty ' TotalClustervCPU/pCPUCore after Failvoer 2' $TotalClustervcpuperpcore_Failovertwo |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB' $TotalClusterRAMGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB_Failover1' $TotalClusterRAMFailoverOne |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB_failover2' $TotalClusterRAMFailvoerTwo |

  Add-Member-pass NoteProperty 'TotalClusterRAMUSAGEPercent' $TotalClusterRAMUsagePercent |

  Add-Member-pass NoteProperty 'TotalClusterRAMUsageGB' $TotalClusterRAMusageGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMFreeGB' $TotalClusterRAMfreeGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMReservedGB(15%) '. "$TotalClusterRAMReservedGB |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB' $TotalClusterRAMAvailable |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB after 1 failover' $TotalClusterRAMAvailable_FailoverOne |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB after failover 2' $TotalClusterRAMAvailable_FailoverTwo |

  Add-Member-pass NoteProperty 'Allocated RAM by virtual computer on an average' $avgrampervm |

  Add-Member-pass NoteProperty 'NEW virtual machines that can be configured based on the average of RAM virtual computer' $newvmcount |

  Add-Member-pass NoteProperty 'NEW virtual machines that can be configured based on the average of RAM virtual computer after 1 failover' $newvmcount_failover1 |

  Add-Member-pass NoteProperty 'NEW virtual machine that can be provisioned littleboy average RAM per virtual computer after failover 2' $newvmcount_failover2 |

  Add-Member-pass NoteProperty "vCPU/pCore ratio after new VM provisioning with 1vcpu" $new1vcpupcpuratio |

  Add-Member-pass NoteProperty ' vCPU/pCore ratio after new VM provisioning with 2vcpu' $new2vcpupcpuratio

  }

  Get-cluster $cluster | Get-vmhost | % {

  $vmhost = $_

  $VMHostView = $VMHost | Get-View

  $VMHostModel = ($VMHostsView | % {$_.}) Hardware.SystemInfo} | Model object-group | Sort - down County | Select - 1 first). Name

  $VMs = $VMHost | Get - VM #|? { $_. PowerState - eq "Receptor"}

  $TotalRAMGB = [math]: round ($vmhost. MemoryTotalGB)

  $TotalRAMUsageGB = [math]: round ($vmhost. MemoryUsageGB)

  $TotalRAMfreeGB = [math]: round ($TotalRAMGB - $TotalRAMUsageGB)

  $PercRAMUsed = [math]: round (($TotalRAMUsageGB/$TotalRAMGB) * 100)

  $TotalRAMReservedFree = [math]: round (($TotalRAMGB/100) * 15)

  $TotalRAMAvailable = [math]: round (($TotalRAMfreegb-$totalramreservedfree))

  New-Object PSObject |

  Add-Member-pass NoteProperty 'VMhost' $vmhost. Name |

  Add-Member-pass NoteProperty model $vmhostmodel |

  Add-Member-pass NoteProperty Sockets $VMHostView.Hardware.cpuinfo.NumCPUPackages |

  Add-Member-pass NoteProperty Cores $VMHostView.Hardware.cpuinfo.NumCPUCores |

  Add-Member-pass NoteProperty son $VMHostView.Hardware.cpuinfo.NumCPUThreads |

  Add-Member-pass NoteProperty VMCount (($VMs | mesure-objet).) County) |

  Add-Member-pass NoteProperty vCPU (0 + ($VMs: measure-object-NumCPU of the sum).) Sum).

  Add-Member-pass NoteProperty vCPUperCore ((0 + ($VMs | mesure-objet-NumCPU de la somme).)) Sum)/$VMHostView.hardware.cpuinfo.NumCPUCores) |

  Add-Member-pass NoteProperty 'RAMGB' $TotalRAMGB |

  Add-Member-pass NoteProperty 'RAMUsageGB' $totalramusageGB |

  Add-Member-pass NoteProperty 'RAMFreeGB' $totalramfreeGB |

  Add-Member-pass NoteProperty 'RAMUsage %' $PercRAMused |

  Add-Member-pass NoteProperty 'RAMReservedGB(15%) '. "$totalramreservedfree |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB' $totalramavailable

  }| Sort VMhost | FT-auto * | Out-String-width 1024

  See the attached script

• Need help to understand political static with Nat No.

  Hi all

  I have a Pix 515e with 6 interfaces. 5 interfaces are considered as internal that we don't want any translation NAT occur between them. We want only NAT between the 5 and the external interface.

  I created a No_Nat ACL successfully to not manage any portion of nat.

  What I have trouble understanding is the static command to allow traffic between higher levels to lower levels and vice versa.

  I understand the

  public static inside_address outside_address (indoor, outdoor)

  for the part of NAT translation.

  What I do not understand, this is when the inside address and address outside are the same, what order are going. For example, my inner interface (192.168.1.0/24) (sec100) is where the live servers, and I have another interface named accounting (192.168.2.0/24) (sec75).

  If I don't want no nat occurs between these two, I have the following

  No_Nat of the 192.168.1.0/24 192.168.2.0/24 ip access list permit

  No_Nat of the 192.168.1.0/24 192.168.2.0/24 ip access list permit

  NAT (inside) 0-list of access No_Nat

  NAT (accounting) 0-list of access No_Nat

  Now how can I enter the static command?

  Maybe

  static (inside, accounting) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

  or

  static (inside, accounting) 192.168.2.0 192.168.2.0 netmask 255.255.255.0

  or

  static (accounting, inside) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

  or

  static (accounting, inside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0

  I do not understand the prescription for it and why it would be used one verses the other way. Is the security level determines the order? Do I need two static command, one for each direction?

  Thank you

  Denny

  Hello denny

  static can be defined in any way... its only traffic that determines what it... for example, if accounting dmz is access to any server on your inside interface, you normally want the accounting servers see the original on its public IP server inside... so, you will end up as static

  static (inside, accounting) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

  only the above static command is sufficient to establish connectivity between inside and dmz accounting. u don't need 2 static on any sense...

  Similarly, if you want to inside users to access a server on the dmz accounting, you can write a static type

  static (accounting, inside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0

  hope you understand. Let us know if you need help... but normally a statement nat 0 is more than enough for the inside / dmz communication

  Kind regards

  REDA

• Need help as soon as POSSIBLE with RAM Preview

  Hey guys I need help with my RAM Preview and how to get it back on the default setting. I don't know what happened, but now my RAM Preview is divided on two screens. I tried literally everything to solve this problem and came to nothing. Nothing on google as well. Help, please! I need to get there soon! Here's what happens: 2016-09 - 03.png - Google Drive

  This is your equal to 2 times and not the RAM Preview Composition Panel (in fact it is seen now and not the RAM Preview... you can call him Mr. Preview if you want to get fancy). knowing how to describe your problem lies at halfway to a solution

  DON'T PANIC!

  Set it to 1 view and you'll be fine!

  

  These views are used for 3D to show the different perspectives and views spelling of a 3D scene. When they have no use in 2D. If you clicked on the option to display 2 views or more they will appear unless you change it back manually. even when you reset your workspace, they will appear - so I understand why this can be confusing.

  more about it here: https://helpx.adobe.com/after-effects/using/modifying-using-views.html...

• I need help creating a vector mask with an adjustable edge or fade, can anyone help?

  I need help creating a vector with an adjustable edge mask or disappear so that I can surround a hand drawn - isolate the background so that I can black out around the hand, the hand a hair above, so I can not just pen tool, can anyone help?

  

  

  I recommend starting with a layer mask based on the green channel, edition that with the curves to get a decent contrast and then paint in the areas needed.

  

• Need help to restore Iphone recycled with no password

  Hello, I received a recycled locked Iphone no password need help. Downloaded Itunes followed instructions nothing and I have no company of cells still need help. J.

  You must use a SIM card to activate the phone

  IF the phone is locked - so it must be a carrier card

  IF the carrier unlocked - any SIM card will do

  There is no need for a new SIM card

• need help to install the printer with cd rom

  Hello, I need help to install a 3310 pphotosmart printer all in one. I don't have the cd ROM any help will be greatly appreicated.

  Thank you

  Hello

  You can download the installer for your printer using the link below.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=439491&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

  Choose "Software and Driver Downloads", select your operating system, open "driver-product Installation Software" and then choose the option download Installer "Full Feature".

  Kind regards

  DP - K

• Error with Facebook and other web pages; document. Body' is null or not an object

  Original title: error line: 19 tank: 23004 error line: 20 cha:124

  document. Body' is null or not an object line: 19 tank: 23004... object doesn't support this property or method line: 20 char: 124... I get these errors on facebook and other web pages help me please!

  Hello

  IE - Tools - Internet Options - Advanced tab - navigation on the article - check the BOTH Disable script
  boxes of debugging.

  Close and restart IE.

  ------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ========================
  ========================

  Tips for solving problems with Internet Explorer
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  ------------------------------------------

  Methods more troubleshooting for Facebook and other questions of the site, if needed:

  Try to add to your trusted sites in IE - Tools - Internet Options - Security - Trusted Sites.

  https://www.Facebook.com/

  http://www.Facebook.com/

  http://www.Facebook.com/login.php

  http://www.Facebook.com/Farmville

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
  installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
  other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
  ask about it here.

  Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
  unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  ------------------------------------------------------

  Maybe using Compatibility Mode will help you.

  Introduction of compatibility view
  http://blogs.msdn.com/ie/archive/2008/08/27/introducing-compatibility-view.aspx

  http://www.Microsoft.com/Windows/Internet-Explorer/features/easier.aspx

  Some Web sites are not displayed correctly or work correctly in Windows Internet
  Explorer 8
  http://support.Microsoft.com/kb/956197

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Help the use of disc after you save a web page Web

  Hi, I almost forgot the little I have learned on the development of web pages, so, I'm a noob total when it comes to this and I need your help.

  I saved as a web page complete hard this web page on my drive, but when I open it in Firefox or IE, it does not display as much as I need. I am mainly interested in show logo images as they appear on the original web page. Browsers just show them briefly when refreshing, but immediately hide them. I can see the image files downloaded to my hard drive and if I open the page in Dreamweaver it displays these images in the preview pane, but I can't make them display in browsers. Dreamweaver, I saved the page as in the folder where the images are and this has also updated the code with relative image links, but browsers still don't show them.

  I would much appreciate your help with this.

  Nancy, I do this all the time. In this case however, the images are photos that show the larger version when the cursor is over. When I saved the page finished, I saw that large images downloaded too and hoped to replicate this behavior from the page saved on my hard drive. I thought that it was a simple matter and now I think it's not.

  The site you are trying to copy uses sophisticated client-side and server-side script.  Unfortunately for you, unless you have all the scripts that make this interactive page, you're spinning your wheels.  Your local copy cannot perform as the site online because you are lacking necessary support files (Javascript, jQuery, etc...).

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• I have the version 4.0 beta 2, I need to be able to enlarge the type on a web page (not all web pages) how can I do this?

  need to enlarge the type on a page (I do not do this by default on all pages.) I play some games, they should not be expanded. How can I go simply enlarge the type on the pages that I need a web page

  This has happened

  Each time Firefox opened

  is if autour 07/20/10

  See the font size and zoom - increase the size of web pages and articles of font size and zoom - increase the size of the web pages . Even if they were written for previous versions of Firefox, they also work with Firefox 4.0b2

  If you need access to the view menu and it is hidden, press the Alt key to temporarily show the menu bar.

• problem with pdf download of web pages

  Number of times a web page that has a pdf that he will not read my adobe. All I get is a circle in the upper left corner of the page with the pdf file. What is the solution?

  Yes, but please see answer #2. This gives an idea to try it - it works? And we must help information.