Need help to get the system restored after Trojan virus. does not work in safe mode

Similar Questions

• Restore not working - the option to restore on my machine does not work. I've highlighted the dates. Does not work in safe mode

  Original title: restoration works not

  The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.

  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.

  It works for some configurations.

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Unable to open the system restore after a virus attack. Get an error, the status of the channel is disabled, Code 230

  OP: The State of the channel is not valid Code 230

  some poured a group of viruses on my VISTA computer. I've tired to restore to an earlier period, but can not get the restore to run. I tried to locate rstrui.exe and right-clicking it goes then properties. Restore to an earlier period does not come to the top. If I click left on rstrui.exe I get the same message, the line is not valid.

  I looked in the forum and have not found an answer to this problem. I have the 7 update. install this would fix the problem?

  Hello snail,

  Do a system restore is not a better way to get rid of viruses on your computer. You should start with the execution of an on-line analysis of Windows Onecare on your computer. Follow the link below to run the scan Windows Onecare online on your computer:

  http://OneCare.live.com/site/en-my/default.htm?mkt=en-my

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• "System Restore" on my computer does not work. Also, I can't create a (error 0 x 80042308)

  I am not able to restore my computer to an earlier stage. The system responds that "no restore points created". Also, I am not able to create a (restore point) since the responses of the system "error 0 x 80042308).

  Thank you very much.

  Well, looks like we found the problem.

  The hard drive is a failure. You need to replace the hard drive and reinstall the operating system using HP recovery support.

  You can continue to use it as - is now, but it will continue to get slower and experience of mistakes random until it just don't dΘmarre yet.

  In any case, I recommend back you up important data (photos, documents, etc.) so that you don't lose.

• We get the windows forum a sound response does not work with xp on bootcamp

  I use bootcamp on Apple Lion operating system b

  and I can't get the sound to work on windows (I am running windows XP Pro)
  Hello
   
  1. What is the number of brand and model of the sound card on the computer?
  2. If it works well before?
  3. don't you make changes to the computer until the problem occurred?
   
  I suggest that you install the updated drivers for the soundcard on the computer by visiting the manufacturer of the sound card and check if it works.
   
  How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658
   
  For your reference: Check from the link below.
  http://support.Apple.com/kb/HT3777
   
  No sound in Windows: http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   
  http://support.Apple.com/kb/HT1461

   

  http://support.Apple.com/kb/HT3986

   

   
  Hope this information is useful.

• How to bypass the automatic connection in Vista. The SHIFT key after that logging does not work.

  I'll put up a laboratory of small kiosk for my students with a minimum account privs.  Sometimes I need to login with the administrator account to perform regular maintenance or solve a problem.  in xp, all I had to do was hold down the SHIFT key before the blue startup screen and all accounts (including my admin account) were visible.  This doesn't seem to work with vista.  is there a secret combo of keyboard shortcuts?  What should I do to ensure that both accounts visible?

  Hi Scentfromabove,

  Follow this step in order to bypass the automatic connection in vista.

  1. Click Start and type netplwiz in the start search box and press ENTER.
  2. check the users must enter a user name and password to use this computer
  3. click on apply and OK.

  I hope this helps.

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• When I open a program, I see flashing colors around the window. This does not work in safe mode.

  Hi, I have Windows 7 running on a new 4330 s HP's ProBook. I find when I open a window envelope program flashes of clear color. When the computer has started in safe mode the flashing stops. When we run the Task Manager and look under the processes tab, I see that the file named ReStart.exe is disappear and reappear when I try and stop the process, I get a message window titled terminate treatment impossible and the message in the window's "the operation could not be performed. Access is denied. Can anyone help that when the window is flashing the program will not respond to mouse clicks and keyboard entry. I ran virus with Trend Microsystems and AVG free version checks, but I still have this problem.

  original title: FLASHING WINDOWS

  Hi Guyz,

  I hv a system HP 4530 s, I installed fresh windows 7 Home Premium and after installing the drivers I had "Restart.exe"problem." IE blinking of windows. I uninstalled the "HP internet sharing ' program and the problem solved.» Try this. Thanx

• can not get the system restore to work

  tried to get the system restore back to an earlier time. says I need to get rid of the useless programs.did who. I have also some icons for files, tools or downloads

  In addition to what has been mentioned, consider the following:

  First of all, what is the last time that the restoration of the system worked?

  Check your system restore settings:

  1. Click Start
  2. Right click on my computer
  3. Click on Properties.
  4. Click on System Restore
  5. If system restore is enabled, the column status of a player will show surveillance.
  6. If not, you can delete ""disable the system restore on all drives ' and then click on OK to activate "

  Is both as soon as you try to restore to the most recent available? If so, unless you have specific reasons to keep the previous restore points, clean the rest, so that you have the most recent restore point on the left.

  To do this:

  1. run Disk Cleanup

  2. click on more Options

  3. under system restore, click cleaning of

  4. click on OK

  This will free up the space. System restore needs a minimum of 200 MB of space to work.

  Reference: http://support.microsoft.com/kb/300044

  Hope this helps

  Post back if necessary

  _________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Key board does not work correctly when you type. Can not get the system restore to work properly, either

  Tried to run the system restore, but it will not restore.

  Hey AnnEdelstein,

  Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.
  Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!

• Hi need help I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Hi, I need help, I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Follow the procedure below and check:

  
  

  End Adobe partner all tasks in the Manager of tasks like creative cloud, CoreSync, AAMUpdater... etc.
  

  Uninstall Adobe Creative Cloud application.

  If you face any problem try CC Uninstaller:

  Using creative cloud | Uninstall the creative cloud desktop application

  After removing Adobe Creative Cloud applications, follow these steps:

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove?

  Rename it as Adobe Creative Cloud-old.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Step 4:

  Temporarily disable anti-virus and firewall.

  
  

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  
  

  Step 5:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• "Windows Vista Security Center" close browser windows, precise I have a virus, and now no programs will be opened. Windows does not start in safe mode, and all the system restore points have already disappeared.

  Hello

  I have a Dell laptop under Windows Vista Premium. I got it for about three years, and he is upset enough ok tonight. In the middle of browsing the internet, check my email, etc., all but one of my browser windows close at random, and a message appears "windows vista Security Center" whenever I try to open a new window, blocking of the site and to say that the site is dangerous and my system has been infiltrated by a Trojan horse. Then he starts the scan and says that I must buy the full to get everything to work again. I closed everything, since I already have McAfee antivirus and internet security, but it does not, and neither did any other progams. I tried restarting in safe mode to restore a backup point, but Windows does not open in safe mode, rather stick for half an hour in the middle of loading. When I managed to start windows in normal mode, I found that all my past restore points had been erased.

  This happened to someone else, and it is fixable without wiping everything?

  Thanks in advance,
  Emma

  Hi Emma,

  This could be due to a virus on your computer.  Try to make a virus on your computer scan to check if your computer is infected.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• After Effects CS6 does not work on the system 10.10.5 Yosemite

  After Effects CS6 does not work on the system 10.10.5 Yosemite

  Yes, it will be. Just update to version 11.0.4 AE.

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I get rid of a popup telling me I have a virus Zeus.  It locks my screen and try to "erase the history and data, etc." does not work.

  I need help with a popup that locks the screen of my iPadAir2.  Go to the setting and compensation history/data does not work.

  If you have deleted the historical data and Safari Web site, and nothing is resolved, the problem is on the wireless router. Check your router wireless for possible violations.