Need help: VSS Writers unstable (missing)

Similar Questions

• Need help to identify the missing screws from the bottom of my 482PG-V7

  Hello, some of my screws fell off my 482PG-V7 and I was trying to identify who they are so that I could buy them online in laptopscrews.com. I tried to search through the online manual for V7-482PG, but I couldn't find the information.

  I have attached a screenshot here - if someone could help me please identify this it would be great, thank you!

  [under the direction of life private - deletion image which displays the serial number].

  M2.5x6mm should be the ones you need.

• I need help with some files missing error Muse - crazy customer

  I get the error that some files are missing or incorrect. I have cleared the cache, I downloaded all the two to Muse, FTP etc. I cleaned the server and reloaded. Make the same mistake everywhere and can not find out what is happening.  www.Authorizedagents.com is the Web site. Site is horrible, but looks great in the preview. I'm in trouble

  Thank you

  Call your hosting provider. The hosting server is back a '503 Service temporarily unavailable' error rather than serve properly good number of files of your site.

• Several VSS writers fail and my backups are failling too. Need help!

  Several VSS writers fail and my backups are failling too. Need help:

  I have a desltop installed SP3 x 64 XP and a laptop with seven x 64 SP1. In both the machine that my backups fail. I'm trying to back up data by using boats to storage, backup Windows also is failling. I'm taking a full backup on a USB external drive (2 TB).

  I did "vssadmin list writers" and showing several writers are in the failed State.

  I've done SFC/scannow, it did not help. There is no error in the disk and Chkdsk.

  I don't know how VSS works and how to solve the problem. Help, please!

  A lot of people told me they found this informative article. That's why I upgraded that and display back again.

  -------------------------------------------------------

  Before you stat is working on this issue make sure that the volumes have no system disk/file error. Run Chkdsk and ensure.

  (1) in the case of a failure of backup/writer, we first check the drivers associated with the VSS backup.

  These drivers are:

  VOLSNAP. SYS

  NTFS. SYS

  SWPRV. DLL

  -Check the version of above mentioned MS 3 files and update using MS Hotfix.

  If we have installed other suppliers, who might be the supplier of StorageCraft, Symantec suppliers and suppliers of Acronis, he must ensure that their files are also updated.

  Note: You can see the list of suppliers using this command: VSSADMIN LIST PROVIDERS

  Some of the DRIVERS PROVIDER commonly find are:

  stcvsm.sys

  symsnap.sys

  snapman.sys

  (2) this step is performed only when we find him

  VSS writers in a failed State. If we find the stable writers and backups still fail, or we get errors, do not perform this step if you please.

  In this case, the VSS writers fail, we can delete the following registry key, after of course saving and restart the server.

  HKLM/Software/Microsoft/EventSystem/{26c.../Subscriptions.

  This key will be automatically recreated when you restart and writers should return to the stable state.

  The writers pending the completion status is not a problem. It's also good that Stable.

  We can do on the Server 2003, 2008 and 2008 R2 OS as well.

  However, in Windows Server 2003, after you delete and restart the "vssadmin list writers" server cannot display all the writers, in this case must register the dll:

  For a list of the dll files to register, please check KB: http://support.microsoft.com/kb/940184

  Note: The reinstatement of dll in Windows Vista/2008 and especially is NOT recommended.

  (3) if we have only one / specificwriter (s) in a State of failure, which would always be SQL, EXchange, IIS or NTDS, then we have need to revive their respective service Console of service.

  If they fail repeatedly, then make sure that the application and its components are updated. See their respective engineers immediately. Make sure that the latest service packs and patches are installed.

  (4) make the foregoing, resolves generally 80 to 90% of the questions. If we believe that the issue is occurring, or we have VSS event errors, it may be the providers, the origin of the problem. If the creation of the snapshot does not properly, it can affect writers and other components involved.

  Please check providers using "vssadmin list providers. If we find any other provider, other than the Microsoft software shadow copy provider, we have to remove from the list.

  To do this: start the registry editor.

  HKLM/System/CurrentControlSet/Services/VSS/suppliers/GUID.

  One GUID would be for Microsoft Software Shadow Copy provider. The other GUID would be for other providers such as StorageCraft. We will save the GUID, and then delete it. Then restart the machine.

  Now when we do vssadmin list providers, we will see only the default Microsoft provider.

  I have seen in many cases where our supplier of StorageCraft may not work properly and continue of not not the authors. In such

  case, if we get rid of the supplier, then the issue is resolved and not re occurs.

  -However this would impede the functionality of StoaregCraft or any other similar to this backup software.

  That's why to engage respective software tech support for further assistance.

  (5) If a shadow copy is enabled on the volume, make sure that the storage area is set to the default location.

  For example:

  If we take a snapshot of C: then the storage area should be C:

  We are changing that, if we do not have enough free space (at least 300 MB) free.

  We can click with the right button on the volume, goto the cliché tab and change it accordingly.

  Also note that the minimum value of the storage area should be 300 MB and maximum can be 3000 MB.

  We can also set any value between the two, which is a multiple of 300, 600, 900, 1200, 1500 etc... According to the available space.

  In the cases where errors in the event viewer on wait times (event id: 12298, 12310, 2004, 12290) then we also need to put the MinDiffArea in the registry.

  HKLM/System/CurrentControlSet/Services/Volsnap

  Right side, new DWORD VALUE - "MinDiffAreaFileSize" - change and set the value between "300-3000 Mo" or any multiple

  300 between the two. Ideally, we can define it on 3000 MB which works even better if we have space.

  Ref: http://support.microsoft.com/kb/826936

  (6) also, please make sure we have plenty of free space. If we go by the book, a snapshot requires at least 10% of the volume

  to be free.

  Storage controllers (SCSI/RAID controllers) could also be a problem and may need to be updated.

• I can not restore all the missing profile I need help and I want to reinstall my firefox browser

  whenever I installed the firefox browser app and once installed it say cannot load the missing profile I do not know what to do and want to installed my firefox evil bowser and I need help please and thank you.

  Hi, see How to run Firefox when your profile is missing or inaccessible and let us know how its going

• Need help updating Bios dc7800 Compact Mini Tower: ROM CAB missing or damaged

  I need help, updated the BIOS on my HP dc7800 CMT. I get this error message:

  System BIOS updte file (. C:\Users\f\Downloads\ROM CAB) is missing or damaged. THE system BIOS does not update.

  I tried to update using the sp53611.exe (8.0 MB) 1.32 Rev A(6 Dec 2011) HP Compaq Business Desktop system BIOS (BIOS 786F1)

  Which can be found here.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3459243 & swItemId = vc_97114_1 & swEnvOid = 4059

  The current version of my BIOS is: 786F1 v01.04 2007-07-18

  I am running Windows 7 64-bit Ultiate. I noticed on the page (linked above) software, it mentions most of the flavors of Windows 7 64-bit, but it does not mention Win 7 ULTIMATE 64-ditch.

  Here's what I did:

  (1) computer restarted in safe mode

  (2) connected as administrator

  (3) Task Manager began to ensure that all applications and most of the services have been arrested

  3 (a) as an additional precaustion, I even stopped Windows Defeneder

  (4) double clicked on sp53611.exe and let it install the software.

  (5) This opens a web page. I clicked on the link which was under the Bio update to a windows environment.

  (6) the process has started, but then I got the above error.

  Any ideas on what to do next?

  Is it possible that the BIOS cannot be updated because the software does not support windows 7 64 bit ULTIMATE?

  Thank you in advance. I have a new graphics card today (Radeon HD 6570 - who has been recommended by Mr. Paul Tikkanen, thank you), and I guess I should have my current BIOS a bit, no?

  Hello:

  There should be no need to update the BIOS, if everything is working properly.

  If you want to update the BIOS, you must use the built in Flash ROM of system menu in the BIOS.

  It is the safest and easiest way to Flash the BIOS.

  All you need is a USB stick formatted with the FAT 32 file system.

  Download the latest BIOS update, then run it.

  You should get a page of instructions.  On this page, you want the option F10 system flash rom and you should see a summary of BACK flash folder view.

  Copy all the files in this folder on your USB.

  Plug the drive into the usb port, restart the PC and at the beginning of the HP welcome screen, press the F10 key to access the BIOS.

  There will be a menu to System Flash ROM

  What to choose and it should see the BIOS update files on the usb flash drive.  Then follow the instructions on the screen to proceed to the update of the BIOS.

• I really need HELP! I received the nugel.exe virus on my laptop and I really missed the whole system! PLEASE HELP ME SOLVE THIS!

  I really need HELP! I received the nugel.exe virus on my laptop. I have Windows XP and I was reading how to remove it. They told me to go to click on the Start button in it, then click on run. type msconfig and on the Startup tab, uncheck everything that ends with TSSD. Well, none of which ended in TSSD was there, so I was told everything that had an UNKNOWN manufacturer in buttons SERVICES and STARTUP uncheck. I restarted my computer and the NELSON was always there.  Then suddenly my computer shut down on its own and restarted with a screen that says now "Windows didn't start because the following file is missing or corrupt: \system32\hal.dll .» Please reinstall a copy of the above file. "Does anyone know how to do this? I feel that I've dealt with the virus stupid for days and I'm going crazy! Can someone please help me solve what I did wrong? PLEASE, I BEG YOU!

  Hi ehaze64,

  Looks like you have made incorrect changes in system configuration utility.

  See the Microsoft articles below to solve the problem by installing the recovery console and use the Bootcfg.exe tool to rebuild the Boot.ini file.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

   

   

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

   

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

• Component 'MSCOMCTL. OCX' or one of its dependencies is not correctly registered: a file is missing or invalid. II NEED HELP

  Component 'MSCOMCTL. OCX' or one of its dependencies is not correctly registered: a file is missing or invalid. II NEED HELP

  Hi, Brahim,.

  You try to install a program?

  Search for MSCOMNCTL. OCX in what follows: C:\Windows\SysWOW64 directory

  Right-click on command prompt and select run as administrator

  Type the following command

  CD C:\Windows\SysWOW64 directory

  Press enter

  Next Type

  Regsvr32 MSCOMCTL. OCX

  Press enter

  You should get a message "DllRegisterServer in mscomctl.ocx succeeded."

  Proceed with the installation

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/mscomctlocx-dependency-error-attempting-to-install/f96acaa3-90d7-437a-a9cc-9130eb17fdb4

• Display settings S920 missing page, need help

  Hello

  I have a strange problem with my phone S920 and need help.

  First I describe that I made:

  I bought two phone weeks and first install update "by air" (from the settings menu, "System Update"). The current version number is S920_ROW_S117_130815. After that, I set the settings on the phone, insert the SIM and SD card and started to install applications. When I found that photos from my SD card are not visible in the gallery. He won't get the images in the external SD card. I can see all the files on this map in the file browser and open, but the Gallery shows only a few files from SD internal tried to force to re-scan of the media files. Finally, Gallery shows all the photos, but I found some files on my SD card had size = 0 bytes. SD card was probably not properly disassembled during a new analysis. I've wiped the SD card in settings of the phone and coppied all data to the SD card in my PC. And re-scan again. Now all the files was correct and all images is vissible in the gallery. But a few days later, I found that I can't run page display settings. I tried to access to this-> all the settings, fron-> display settings but received a message "Unfortunately stopped Control Panel:

  OK, I noticed that my problem disappeared after I disabled my live wallpaper. Let me tinker some more...

• Satellite C660D - 18 c - need help with recovery

  Hello

  I need help for my computer. My calculation is not started and shows "bootmrg is missing. I'm putting in recovery CD (i downloaded from Internet) when the CD starts, I get choose it to select the operating system, but it isn't here, what should I do?

  You can't expect that we comment on a few non-originales recovery image download from the internet.

  Recovery image is on a language only if you can't choose another language. Recovery images vary between countries, so if you have a recovery for UK image you must install the default language (English).

  What language is this recovery image?

• Need help for reading in parallel on the same interface and writing XNET

  Hello. I need help to configure CAN interface to write and read from the same interface.

  I use NI PXI-8513/2. I use CAN1 as interface.

  My had TO send status messages CAN every 100ms. I have to read in order to return akntoowlege to keep DUT CAN interface happy and not make mistakes.

  So, I want to open Strim Session and readall frames in the loop. At the same time, I need to be able to write in a frame HAD at the time...

  I only need to read one picture at a time too, but since I know the ID, I can pull it from the stream.

  What I'm confusing all is how to put in place the same CAN1 interface to be able to write and read in parallel.

  I think I would get errors that interface is already in use.

  Since I'm new to CAN, I was read and write only when necessary. But, sometimes I was getting errors on my messages. Sometimes I get message, sometimes miss me. But, when I run CAN test criminal as sniffer he sends and written every time. I was told it's because it recognizes all messages.

  I opened to suggestions of how best to implement the interface.

  I guess I can use CAN2 and separator to work around this problem, but I would use an interface if possible.

  Thank you

  Hi Rus,

  The XNET hadrware takes care of most of the low level of detials for you. The reading and writing of the circuits are both connected to the bus at any time. When you write to the hardware it will try to put a frame on the bus at the first opportunity he can. If the frame loses arbitration material re - will attempt to send the frame up is successful. Reception equipment monitor activity on the bus, regardless of what it conveys. The material received will usually throw a framework that was sent by communication equipment, but there is an Echo property pass to circumvent this behavior too.

  Take a look at the example of the expedition: MAY-> NI - XNET-> Sessions-> multiple Sessions Intro-> CAN even exit entry framework Port unique Point.vi. Keep in mind that this example you will need to use a second CAN interface to recognize frames, it transmits. I would recoment against the example CAN output Frame Single Point which would mimic your ECU if you choose a type of cyclic frame running this example.

• Windows - WDS deployment services. Need help please for password of mystery problem

  Hello

  Just need help or advice about a problem that's been here recently. I'll give you the sequence of events so that you can better understand.

  An audit has been ordered here where I work and as I had just started working here 3 months ago, I decided to lock the network and make sure that everything was safe.

  There is no service account, and the administrator account was used to run all 3rd party applications, so you can imagine what happened when I changed the admin password.

  Before I did I created service accounts and exchanged them one by one, but the only problem that remains is WDS. When we PXE boot and deploy the image it is the language selection screen and also ask the domain credentials of junction. I have setup a DomainOverlord service account, checked and done so he could join machines to the domain and replaced the old administrator username and password in the AutoUnattend.xml file but it seems not to pick up the password.

  Is there something that I am missing? Is it possible to check which file AutoUnattend.xml using the WIM file? The person who told of course establish a bit messy and I can see at 8-9 AutoUnattend.xml in random places on the server. I changed the details in each one, but it is not always the image itself.

  Any help would be great, the guy in front of me got me fired, I begin to understand why!

  Thank you

  Luke Bayley

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Infected Winlogon.exe and explorer.exe accidentally deleted on XP Pro PC - need help from recovery console

  Hello

  Windows XP Pro SP3 Dell Optiplex and been infected by Trojan in winlogon exe files and Explorer. AVG asked me if I wanted to force deletion and I foolishly agreed. Now, I get the BSOD and the message 'Windows logon done unexpectedly '.   It is a work PC and the CD only we have is the Dell CD to re - install and I know that I need as the first step recovery console. I don't know if the recovery console is on it, and then I need help for the uncomprressed explorer.ex_ and winlogon.ex_ and in their right place.

  I'm not a total newbie, but it's been some time that I used the recovery console.

  Help?  Thanks in advance and greetings to all

  Morey

  Try to be more specific with the error messages you see, so it does not guess or try things.

  Here is an example of a popular error message that sounds like yours (maybe):

  STOP: c000021a {fatal system error}
  The Windows logon process ended unexpectedly with the status of 0xc0000034 (0 x 0000000 0000000 x 0).
  The system has been shut down.

  What exactly tell your message?

  There should be copies of XP system files backup all critical already on your hard drive in the windows\system32\dllcache folder (it is this case), you may not need any expansion.

  I would like to see the exact error message, make a CD bootable Recovery Console, run chkdsk/r even if he doesn't find anything to do and then see the replacement of missing persons or suspicious files, either by copying it in the backup copies of replacement of the recovery, or from another CD Console, you can do if the Recovery Console gives you a hard time (first do the CD Recovery Console).

  First of all, you need to start on something...

  You can do a restore bootable XP CD as follows:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• HP 355 G2: 3d Video Controller Driver for Hp 355 g2 portable need help

  Hi all

  I use Hp 355 g2 laptop with Window 7 64 bit

  I need help reagarding controller driver 3d video. I need this driver. I tried to find the Hpoffical site, but not found.

  PCI\VEN_1002 & DEV_6664 & SUBSYS_22C2103C & REV_00
  PCI\VEN_1002 & DEV_6664 & SUBSYS_22C2103C
  PCI\VEN_1002 & DEV_6664 & CC_038000
  PCI\VEN_1002 & DEV_6664 & CC_0380

  and unknow driver is missing

  USB\VID_138A & PID_0050 & REV_0060
  USB\VID_138A & PID_0050

  Please send me the link for this driver.

  Hello:

  You need these drivers...

  Video:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6886537&swItemId=ob_134450_1&swEnvOid=4059#tab1

  UNK:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6886537&swItemId=ob_132284_1&swEnvOid=4059