Need help with a virtual machine between multiple users on iMac even...

Similar Questions

• How to share a virtual machine between multiple users in Fusion 5

  I have an iMac where I want to share a Windows 7 VM with another user... in fact she'll use it much more I will.  Problem is I get messages saying that it has insufficient privileges. I found a video (http://www.youtube.com/watch?v=7-Uxfuo0Reo) which showed how, but it did not work.

  I could just create a new one, but it is such a pain, with all software updates, etc...

  Ideas?

  Take a look at: sharing a VM between users on Mac OS

• help with the virtual machine files

  Today I got the error when I tried to open my virtual machine below.  I have searched the forums and seen the text file/script but does not know to use.

  Can anyone help?

  "/ Users/shade1981/Documents/Virtual Machines.localized/Windows XP/Professional.vmwarevm Windows XP Professional.vmx ' is not a valid virtual machine configuration file

  The attachment "Windows XP Professional.vmdk.zip" was created in the vmware.log file.

  Unzip the attached file and replace it with the original file damaged.

• Need help to restore virtual machines

  I need to change the IP address of my esx. Not knowing much about linux, I just reinstalled the software esx with virtual machines. So now, I have my esx with all the files for my virtual machines... Only, I don't know how to import the backs or all I have to do to be able to start my VMs.

  Thank you.

  If a virtual computer is disconnected from the inventory in a VC... .just do it for you can come back... Right-click on the selection of ESX Server for new Virtual Machine... Select Custon (for a VM existing to recover)... Give a new name to the VM and select data center... then click Next... Select the data store... For guest operating system and Version, click Next... Select to virtual processors... click Next... Select the size of the memory... Select your network, then click Next.. Pralines there for default storage adapters and click Next... Select use an existing virtual drive then click Next... browse your datastore VM and select leave vm vmdk file... then click next and next... finishing

• Need help with pushview to see the multiple files

  Does anyone know how to create a pushview or changeHandler function that would allow each item in a list when selected to switch to a different view?

  Example is that if as a 1, 2, 3 on it by selecting 1 user to take to view1.mxml, by selecting 2 would send user to view2.mxml, etc.  I don't want to send all the elements of list to the same view and just load different information.

  Thank you!

  I'll check out that thank you!

  In the meantime, I got the answer - see here: http://stackoverflow.com/questions/8936115/how-to-create-multiple-events-in-a-single-list-au-flex

• Need help install appliance virtual machine (file unpacking).

  I'm new to VMware devices.  ?:|   I try to install FireScope BSM: BE the device. The directions say to download the image file from tablet to the data store; and unpack once it has been downloaded. It is a tar.gz file. MY question is: how to unzip a file in the data store? ESX Server version 3.5.0 doesn't let me connect to the CLI. Anyone know how I can do this?

  Thank you

  You "might" use the data store browser to upload files to the data store OR you can use a client PCs (google FastSCP) it's free and will allow you to easily upload files to your esx hosts.

  -

• NB100 - need help with Toshiba Eco Utility to advanced user

  I want to ask the advanced user (knowing regedit, windows services and processes) and Eco Utility installed to help me with Toshiba Eco Utility.

  (1) I need the registry branch where Eco Utility to store preferences.
  (2) screenshot for TecoService services. With params.
  (3) screen capture of process. Looking for TPCMpwr.exe it

  Why I need?
  I have Toshiba NB100 netbook where Toshiba has not released Eco Utility.
  NB200 there, but not for NB100.
  I don't know why... It will work, only I need the registry and services information.

  P.S. If Toshiba engineers will read this post.
  Why Toshiba release Eco Utility for NB100?

  Hi Lrrrr,

  Just a simple question: what installation Eco Utility on your NB100?

  But normally you don't need this utility of Eco. As much I know this tool only changes power settings Windows you can do it yourself too. It s a nice tool where you can reduce the energy consumption in a single click, but you can do it yourself if you create the own power profile or change.

• Need help with this code to update the user interface example

  I'm triying to understand the differences between the three methods to manage UI interactions.
  I'm really confused with these three terms when triying them figure out in a real case.
  Basically, I know that I should use invokeLater, invokeAndWat, or getEventLock() to avoid
  This exception: java.lang.illegalStateException: engine access UI without holding the lock on the event

  The code below illustrates the function of the invokeAndWait method, but if I replace it with
  invokeLater or getEventLock() the program will work exactly the same way.
  Could you please change the code to show the differences between the three
  methods of updating the user interface?

  / public final class HelloWorldMainScreen extends form {}

  private LabelField labelField;
  public HelloWorldMainScreen() {}
  labelField = new LabelField ("Hello World");
  Add (labelField);
  Thread MainScreenUpdaterThread = new MainScreenUpdaterThread (this);
  thread. Start();
  }

  {} public void appendLabelText (String text)
  labelField.setText(labelField.getText()+"\n"+text);
  }

  }

  SerializableAttribute public class MainScreenUpdaterThread extends Thread {}
  HelloWorldMainScreen screen;

  public MainScreenUpdaterThread (screen HelloWorldMainScreen) {}
  this.mainScreen = screen;
  }

  public void run() {}
  for (int i = 0; i)< 10;="" i++)="">
  try {}
  Thread.Sleep (5000);
  } catch (InterruptedException ex) {};
  UiApplication.getUiApplication () .invokeAndWait (new Runnable() {}
  public void run() {}
  mainScreen.appendLabelText ("Update");
  }
  });

  }
  }
  }

  These three concepts are very confusing for a lot from people so all explanatory source code
  describing their functions will be highly useful for everyone, I think.

  Thanks in advance!

  With respect to the effect, there is no difference between methods.  The difference is the way in which the result is achieved.  So we can't change the code to show you the difference.

  As we are unable to demonstrate the difference, you have to do with an explanation.  To understand the explanation, you'll need to understand the thread of events, so if you have not already, please consider this:

  http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865

  If the three options are differentiated by the processing order:

  (a) invokeLater executes the update on the thread of events.  The transformation takes place at a later stage and the code which is in order after the invokeLater will actually run before the code within the invokeLater.

  (b) invokeAndWait also manages the update on the thread of events, which means that all other events that await on the thread of events will be run before this code.  But any code after the invokeAndWait will not be executed.

  (c) the synchronized option, like invokeAndWait, runs the update of the UI before moving on to the following code.  The difference is that the code to run on the event Thread is not executed before code in the synchronized block.

  If this is meaningless, so that probably does not matter too much.  in general, you should use invokeLater, except if you need to update the user interface occur in the order with your background processing.  If so, use invokeAndWait. It has synced are very few occasions where you must use the block, and it should be very small updates to the user interface and you should understand the implications this could have on the wire events.

• Need help with auto-fill the fields

  Hello

  I need help with a form that has multiple pages.  I have some areas I are duplicated in my document.  How I got these fields auto fill throughout the form/paper? For example, I'm going to fname lname, address, telephone, etc... How can I get these fields automatically on the other pages of the form?  Is this possible?  Any suggestions are welcome.

  Thank you in advance.

  If it's just a fill operation then make sure the fields have the same name. Then set the binding to the global level and all the fields with the same name will get the same value.

  Paul

• Need help with query between 2 dates

  Hello

  I did not SEE in a long time and need help with a simple query.

  I have a table of DB access with 3 fields, name, date and number

  What I want is to create a query to retrieve all the names between 2 dates

  When I ask the date field, the results are showing in this formats 2013-07-12 00:00:00

  Here's my query

  < cfquery datasource = 'mydb' name = 'test' >

  SELECT name from myTable

  where edate between ' 2011-01-01 00:00:00 ' AND ' 2013-01-01 00:00:00 '

  < / cfquery >

  < cfoutput query = 'test' >

  #name #.

  < / cfoutput >

  What I get is this error

  ODBC = 22005 (assignment error) error code

  [Microsoft] [ODBC Microsoft Access driver] Type mismatch of data in the expression of the criteria.

  Don't know what I'm doing wrong here.

  Please let me know.

  Thank you

  SELECT ename

  FROM MyTable

  WHERE edate BETWEEN

  AND

  #ename #.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Need help with my Y40-80? power management

  I get message to the center of the Action as follows:

  Compatibility problem between your power management system and Windows

  Your power management system is not compatible with this version of Windows.

  The name of the model of your power management system is ACPI Lenovo compatible virtual controller.

  Can anyone help please. I have windows running Y40-80 8.1 is a clean install of windows 8.1 x 64 all drivers are up to this day, just need help with the question above thank you

  Lenovo today released a new bios update for Y40-80 laptops, I did the update and, so far, the error message that I posted above has not appeared again so set the mite of update of the bios not sure yet, I'll keep up to date on this subject and write again soon

• Need help with some cluster power shell scripts

  Guys,

  I need help with 2 scripts.

  Text 1.

  I need a power shell script that will get all the virtual machine in a specific cluster.  Virtual machine names as well as the number of processors, output allocated RAM and size of CSV file.

  Text 2.

  I need a script that will get all data warehouses in a specific cluster and store name data as well as the amounf of free space for a CSV output.

  Thanks in advance guys.

  Greetings, @peter79 -.

  For the first part:

  Get-Cluster myClusterName | Get-VM | Select-Object Name, MemoryMB, NumCpu | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  And for the second, how about:

  Get-Cluster myClusterName | Get-VMHost | Get-Random | Get-Datastore | Select-Object name, FreeSpaceMB, CapacityMB | Export-Csv -NoTypeInformation c:\temp\myDaterstoreInfo.csv
  

  The first would be quite a bit faster by using Get - view instead of Get - VM.  It would be like:

  ## get an array of VM View objects with just the desired/needed properties
  $arrVMViews = Get-View -ViewType VirtualMachine -SearchRoot (Get-Cluster myClusterName).MoRef -Property Config.Hardware,Name
  ## make the two filters for displaying the desired info
  $hshCPUCountFilter = @{n="NumCPUs"; e={$_.Config.Hardware.NumCPU}}
  $hshMemAmtFilter = @{n="MemoryMB"; e={$_.Config.Hardware.MemoryMB}}
  ## display the info, and export to CSV
  $arrVMViews | Select-Object name, $hshCPUCountFilter, $hshMemAmtFilter | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  Enjoy.

• SQL and Exchange on the same material - need help with storage!

  Hi all!

  I am definitely a newbie in the world of virtualization.  A colleague and I have spent hours scouring the Internet and reading white papers for answers and have been unable to find exactly what it takes.  So far, there has not been a lack of trying.  We are a very small company with 75 employees.  We have an Exchange Server and implement our first SQL Server and we want to virtualize both on hardware nine using the ESX 4.0 Essentials.  I don't know, probably not the best two apps to virtualize on a single piece of hardware, but we have about 12 people, using SQL server... at least for the foreseeable

  the future.  I'll try to make this simple in my questioning:

  (1.) what is the difference between a logical unit number, a PIN, a VMFS, a VM data store and how they relate to each other?  I know what means LUNS and VMFS and I know what a brooch is a hard drive, so no links to wikis on the definition of a LUN ;-).  Been there, done that.   These terms seem to be used very freely in all directions and it's confusing about how they relate to storage.

  (2.) we have 6 146 GB SAS drives for storage on my HP ML350G6, the config that I want to work with is the following:

  2 hard drives - RAID 1 - held Exchange OS, T-logs Exchange and SQL OS (possibly install VCenter Server on that as well in another virtual machine)
  4 hard drives - RAID 10 - will hold the Exchange and SQL DB database.

  Y at - it faults with this configuration?

  (3.) if #2 above is OK, how you (and you should in our small store scenario) cover several RAID (spindle?) arrays with a virtual machine.  In other words, how to you create a virtual Exchange computer and upgrade the operating system on a RAID, newspapers on the same value but different partition RAID and the Pb on a completely different RAID set?

  (4.) if #2 not OK, I should just create 2 simple VM Exchange, a for SQL and worry not separate newspapers/operating systems of databases on RAID berries?

  I thank you very much in advance!  These forums are wonderful!

  Confused in Cincinnati,

  -Bryan

  Thanks for your reply Wes!   I have a few questions for follow-up

  make sure that I understand.

  Therefore a unit logic simply number a "partition" carved on a storage space (if that)

  storage is a single hard drive or a RAID array)?   And of course each hard

  drive is a PIN, but when you take 3 discs and their RAID together.

  they, in fact, become a PIN, especially when it comes

  on reduncanc and no performance?

  VMware "" still does not see the storage, particularly the way in which you install. ESX will simply see a drive, format it with VMFS, so you can create files of your virtual hard disk on top of that (.vmdks) and your virtual configuration (.vmx)

  I'm not sure I understand the concern with VCenter Server?   It can not

  be on the same box as ESX running a VM couple?   My opinion is that

  VCenter Server would be just an another VM on this box?   Maybe I need to

  Read more on the VCenter Server!

  vCenter may work in esx, but it is preferable to have an another box, also don't forget that vcenter has its own SQL database and needs 3 + GB of ram. In your configuration, you can do better leaving vcenter out of the picture completely.

  Thanks again!

  -Bryan

  More like this:

  RAID 1 array: LUN1-> Datastore1-> ExchangeOS.vmdk, ExchangeLogs.vmdk, SQLOS.vmdk RAID 10 Array: LUN2-> Datastore2-> ExchangeDB.vmdk, SQLDB.vmdk

• Need help with slui message with the Validation Code: 50

  OT: need help with the message 'victim' slui...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
  Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
  Windows product ID: 00371-702-8613485-06367
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
  Installation ID: 022214046070387640229264400212325972472065330163335456
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X7D3P
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 12/01/2016 11:28:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:11:2016 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1425 APIC 060111
  FACP 060111 FACP1425
  HPET 060111 OEMHPET
  MCFG 060111 OEMMCFG
  LASRYVITRAGE OEMB1425 060111
  ASPT 060111 PerfTune
  OEMOSFR OSFR 060111
  SSDT DpgPmm CpuPm

  Hello

  Thanks to everyone who responded to my question.

  Turns out it would not activate the system properties page.

  He did, however, turn on the tool online browser without a

  hitch. Yes, problem solved.

  Jon