interface CC display problem, bar menus

Similar Questions

• Why the menu bar menus cannot be moved to another toolbar?

  Hello

  In previous versions of Firefox, I used to move all the items of the menu bar navigation bar.

  But now that the tabs can be at the top of the window, which saves a useless space (the guys great work there), I hide the menu bar to use (and use the Firefox button).

  Since I can't find all the options that I used to find in the menus in the Firefox button (it has less detail and I have an additional module - ScrapBook - added a menu for traditional menus), I tried to move the navigation bar menus, so I can use them both at the same time. It seems that I can't move the menus anywhere in the menu bar. Why? I see no reason for the menus don't not have to be mobile as the other elements.

  This would give an opportunity to use old (and huge) menus and the new button at the same time.

  Thank you.

  teagish:

  Tagish said: I do not see an image in your last post, so I guess that you have changed from that of the ' 29/11/13 12:47 ' post.
  
  Answer: This is the image that I was referencing.
  

  Here's a broad overview of the Australis in its current form (there is little information that we are almost half a year of release and the release date can always be pushed if necessary) - https://blog.mozilla.org/ux/2013/11/australis-is-landing-in-firefox-nightly
  
  To download Australis - https://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/latest-ux/

  • Set up a separate profile for each version of Firefox including Australis to avoid damage to your profile-

  Don't forget that Australis is in pre-alpha, is not intended for the average user, for purposes of testing only at this point, is not completely stable and safe for daily use and is subject to change on a daily basis.

  Remember that anything, including the answers that I gave you earlier in this post and this post below this post (so that should happen) is subject to change, because the developers your feedback and if they decide to make a change.

  I suggest that you expect the Australis interface is closer to release to specific questions; Maybe wait for it either in the Aurora channel in a few weeks, then download and install it and use the Firefox Help menu > submit your comments to send feedback to the developers. Will NOT respond to your comments, but they can read them.

  1. The activity indicator is no longer available. Maybe an add-on will be developed later.
  2. Moving of House provided, download and bookmark combined this bookmarks / page display is possible and that they can be moved to the left of the URL/address bar. It seems that the button bar-3 (with customizable content by the user) is NOT mobile and can NOT be hidden. Note that the bookmark bookmarks button / display the page is currently "twinned" and cannot be moved as a unit.
  3. URL/address bar and the search bar may NOT currently be removed or hidden. In fact, the Navigation toolbar is more may be hidden. It is my understanding that the URL/address bar is now a single unit which includes the Go/Stop/Reload button and Back/Forward button and components Go/Stop/Reload button and Back/Forward button cannot be separated from the URL/address bar. There has been a lot of questions on the forum where users have hidden or deleted these articles and it causes huge problems for them.
  4. Read carefully, as I've included in one of my previous posts. Currently the default installation of Australis places the Menu bar at the left end of the title bar of the windows with the minimize mazimize, close of the buttons on the right side of the title bar. The menu bar is NOT currently but mobile can be turned off and temporarily displayed by pressing ALT or F10 in Windows. The Menu bar can be replaced using the add-on classic theme restaurant (click on the link where it is mentioned in a previous post above) to display the Firefox button. It is supposed to display the Firefox button in the title bar, but he shows currently below the title bar, taking a vertical line of the space. Currently the bar menu, when poster takes a bit more pixels vertically it needs; I hope that will be fixed.
  5. Currently, the default installation shows the menu bar (where the left side of the Windows title bar was previously), tabs, and the Navigation toolbar.

  Some add-ons will probably grow to allow users to modify some, but not all, changes to the interface. Restorer of classic theme has already been mentioned above, and I used it to change the look of my working version of installed 28.0a1 Australis.

  Let's please wait and see what develops rather guessing what might happen, or make decisions based on the current pre-alpha of Australis.

• How can I display the bar of the add-on in fullscreen?

  I dragged the textfield of the navigation bar in the bar of the add-on to get ehe navigation down. Now when I turn full screen, the bar of the Add on is hidden, which results in not having the field of navigation. How to display the bar of the add-on in fullscreen, permanently?

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #addon-bar[moz-collapsed="true"] { visibility:visible!important; }
  

  If you still wan to be able to hide the bar Addon then use:

  #addon-bar[moz-collapsed="true"][collapsed="false"] { visibility:visible!important; }
  

• Mac book air display problem

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after entering the password and pressing on enter three lines (not really lines they look more like lightning, appear from the top of the screen) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen this thick green line 3 inch appears and goes about a second or 2.

  help someone?

  Thank you

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  If no success, take a picture of the problem.  Make an appointment at an Apple store genius bar for a free evaluation.  If necessary, show the technician, an image of the screen.

  Ciao.

• The satellite M60 display problems

  Hello

  I bought a satellite M60 a month ago, and since then, I've been strugling trying to solve a problem that has to do with the display (ATI 700 X mobility).
  When I play some games (the dawn of war, Unreal tournament...) the computer freezes completely, I actually have to force stop it to restart.
  Another problem, that I have seen is with Mixmeister Pro 6, the video playback is erratic, it is as if the computer is unable to handle any overload.

  I tried the upgrade of drivers, nothing works, then I installed the third party Omega drivers, but once again, nothing to do.

  Since the purchase of the M60, I had to correct problems of Wirless and PCMCIA card through driver updates, but there is nothing that I'm be able to do to resolve this display problem.

  I am quite convinced it's a driver issue, but then again, nothing is certain.

  If anyone can help me please I'm getting desperate.

  Hello

  Well, it's not easy to say why it happens but one of my friends has sometimes even appearance but on another unit. If he plays a high-performance games unity cling.
  In my view, this could be a heating problem. Playing games is hard work for the laptop, because all parts (bars of memory, processor, graphics card, etc.) work with max performance and produce a lot of heat. Most laptops are not developed for this.

  However, you should always use the graphics driver from Toshiba. I found the latest version of 15/07/05. It is a display 8.121.050.322A driver. In addition, you must install latest DirectX. I think that it s a 9.1. Check whether the fixes for these games are available.

  Second, if video playback is erratic, it seems that the OS is fully committed.
  In this case, you should check the processes that run in the background of the operating system.
  In addition, try to defragment the HARD disk

  Good bye

• Display problems with the Portege R600 and Win 7

  I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

  I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

  It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

  A refresh solves it.

  Anyone have any ideas?

  > I have an external monitor attached and get the same problem with or without him.
  Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
  It would be the worst case, because that would mean that the motherboard needs to be replaced

  But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible

• Display problems with all types of terrain and graphic

  Hello

  I have display problems general with all types of chart, graph or plot that I try to use, on two different machines, both with NVIDIA graphics cards.  A machine is a MacBook under XP SP2 in bootcamp and the other a Dell T3400 workstation (or something similar) under XP SP3.

  I posted this thread earlier which Ben replies to the weird graphic behavior.  Ben suggested that I try to simplify my code as much as possible while keeping the bad behavior and by submitting to the NC and the forum, because it is others have had problems of graph.  I tried, but in vain.  Display problem continues and continues and continues and then they just go and I can't get back by unscrewing the last stage of reduction or simplification of code.  But at some point during the reconstruction of the code, which I cannot determine, returns the bad behavior.

  So, I was set up with graphics looking for shit, until recently, when I thought I'd try some suggestions of other messages to a XY-plot function as a graph by creating a buffer and using nodes of ownership of land for the range control.  Things seemed promising, until my "XY table" started getting shit, too.  This time, the issue was with the grid lines becomes all chopped, attached images.

  I am out of resources here.  I think I'm running out of options to display graphic data in an acceptable manner.  Do I have to display data by using an Excel chart in an ActiveX container in Labview?  I'm not skilled enough to do it again.  I like Labview, it is the only programming language that I am competent even remotely help, but it's just inferiorating.

  Any suggestions would be much appreciated.  Thanks for reading.

  -Greg

  Greg,

  is there a particular reason why you use the bar plots - view superior graphic style? Try activating the legend of the plot, go to the bar plots and select the first track of the Bar Style. Your chart is displayed very well after that.

  See you soon,.

  Cerati

• How to display the bars on the left side and right at the start side collapsed?

  I use 5 Apex (universal theme),

  I created a page based on the template "on the right and left columns,"

  When I go on this page appear on the left side bar and expanded right side.

  How can change this behavior to display the bars on the left side and right initially collapsed?

  Thanks in advance!

  Salim

  Hello

  Please take a look at this thread:

  Re: Default Apex 5 main Navigation to closed

  The code that you need to exsecute all pages is the following:

  .about $(window) ("theme42ready", function() {}

  If ($("body").hasClass ("js-navExpanded")) {}

  $("#t_Button_navControl").click ();

  }

  If ($("body").hasClass ("js-rightExpanded")) {}

  $("#t_Button_rightControlButton").click ();

  }

  });

  In the future, we plan to have an API available for users with more elegance.

  Please let me know if you encounter any problems,

  Tim

• With output window display problems Webhelp/Webhelp Pro

  Hello

  I created a few projects webhelp after being informed by our team of QA and development projects I created HTML5 format were not compatible with 1.) old versions of IE [specifically the 7 and 8 - posted another discussion on this in the last couple months, tried the patch of shiv without result] and 2) the control used by the program to display a HTML file, mounted on a given device [iOS] - what I have said, this is true for iOS 7 and it is supposed to be a new version of IOS control 8 which supports the HTML features. But we are not there right now (still need to support iOS 7), by application QA/DEV, so I created the webhelp projects to see if these work and display better on devices.

  I noticed some display problems when I generate and view webhelp output. Initially, the books in the table of contents are cut off and I have to resize the TOC pane and drag the bar to scroll at the bottom of the viewport to see. But when I do this, the button of the search field in the toolbar is cut. Also, the initial vertical scroll bar displayed on the right side of the window apply to the entire window. In other words, I can't use it to scroll upwards or downwards in the displayed topic. Again, I have to resize the overall window or drag the scroll down bar all the way to the right, how I can see a partial 'hidden' vertical scroll bar for the window in the topic.

  The Properties window to create/edit a dialog box window for webhelp and webhelp pro provides much in the way of personalization or all that I can see related to these questions.

  Can anyone offer any suggestions on how I can get the window to display correctly?

  Thanks in advance for any help you can provide.

  Sincerely,

  DH

  HA! Looks like we stumbled on the solution by mistake. I checked the zoom setting and it was 90%. This has changed to 100% and voila'! No more double scrollbar. The skin - a little Diggin ' this Global Connect we've also changed. But you can now use a scrollbar to move up and down in the topic you would expect.

  

  Thanks for all your time and suggestions to help me solve this problem!

  DH

• The Adobe Reader 11.0.09 display problem

  Hello world

  My operating system is Windows XP Professional SP3.

  I met a strange display issue Adobe Reader 11.0.09.

  The problem happened not only Adobe Reader 11.0.09 traditional Chinese, but also the United States English.

  The display problem, such as the two images as follows.

  

  

  The strange problem was this menu bar, covered by toolbar items or disappeared.

  Please tell me how to solve the problem.

  Thank you very much.

  Steven Hung wrote:

  I had updated the version of Kaspersky Internet Security 2015 and it was up to date.

  Did you update to version 15.0.1.415?  The problem disappeared with this update?

• Creative cloud - bar menus and palette are the tiny fonts.

  I just downloaded creative cloud on my lenovo Yoga Pro 2.  The size of my bar menus and Palette are the tiny fonts.  However, the MenuBar of Lightroom and palette are in an easy to read normal size fonts.  Can someone tell me how to change just Photoshop?

  Because now the solution seems to use 200% scale setting in Edit > Preferences > experimental features.

  

  There is also a setting to edit > Preferences > Interface > UI font size that expands some of the fonts, although not the menu bar.

  

  After changing a setting, you must restart photoshop to see the changes.

  (File > Exit)

• There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  Apparently, you're trying to use AirPlay to display content that is protected in a way that not only allows the copy.

• Retina MBP display problems

  I vaguely remember that there is a kind of reminder for display problems on some models of MacBook Pro retina. I don't remember the nature of the issue, nor the accurate models who were eligible. I have a 15-inch model, end of 2013, and what I see is pictured below (dead pixels). Can anyone remember if there was a recall and that this issue would be covered?

  

  2011-2013 models.

  To my knowledge the retinas did not have a reminder. However, I got my rMBP 2012 15 "screen changed due to ghosting. I do not know if Apple which is still.

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.