need help with my page centering

Similar Questions

• Please HELP: need help with a page after coding button.

  Okay, in detail, I'm trying to code a next page button and can't really understand how and tried to look on the net but could not find the kind of that I'm looking. So ok, the kind of the page button depending on whether I'm looking for is the kind where you as < < 1 2 3 4 5... (Next page button) > > not only a button when I need to hyperlink to the next page url because I like 35 pages to put... so I'm trying to understand it and yet no cigar then someone can please help me with this? Thank you!

  I have seen a lot (on the forums with over 1000 pages on some discussions) is to add a block 'paging' of the code that made:

  1. two or three pages before the current page
  2. two or three pages after the current page
  3. a dropdown menu with all THE listed pages

  The button or the 'next' link is just a copy of the last link in the online list.

  Something like this:

  GoTo page1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950  1, 2, 3 ... 51, 52, 53  Next

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Need help with slui message with the Validation Code: 50

  OT: need help with the message 'victim' slui...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
  Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
  Windows product ID: 00371-702-8613485-06367
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
  Installation ID: 022214046070387640229264400212325972472065330163335456
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X7D3P
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 12/01/2016 11:28:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:11:2016 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1425 APIC 060111
  FACP 060111 FACP1425
  HPET 060111 OEMHPET
  MCFG 060111 OEMMCFG
  LASRYVITRAGE OEMB1425 060111
  ASPT 060111 PerfTune
  OEMOSFR OSFR 060111
  SSDT DpgPmm CpuPm

  Hello

  Thanks to everyone who responded to my question.

  Turns out it would not activate the system properties page.

  He did, however, turn on the tool online browser without a

  hitch. Yes, problem solved.

  Jon

• Need help with setting up in checkbox in interactive reports

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  < input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox

  Do I need to configure anything else

  Aditya Gupta wrote:

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  instead of the checkbox

  Do I need to configure anything else

  This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).

  
  

  Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• Need help with google ranking

  If I want to watch my site ive created in google is to see this:

  Woning huren in Paramaribo, Suriname

  hureninparamaribo.nl /.

  U good bij ons een in Suriname hurenvakantiehuis. Deze woning is good in room Paramaribocentrum van het. Of woning is een rüstige wijk good ...
  

  U has said een + 1 belangrijkste

  As you can see before the URL is no WWW. When I click on the link, the only thing I see is a small form.  Y at - there someone who can tell me where I can change this?

  Kind regards Brian

  Great! Thank you..

  Date: Wednesday, May 9, 2012 06:15:57-0600

  From: [email protected]

  To: [email protected]

  Topic: Need help with google ranking

  Re: Need help with google ranking

  created by Ken Binney in Dreamweaver - discover complete discussion

  Hello, Brian - the problem is the file extension, you use on your pages in the folder root of your remote site you have a page with only a form named:http://www.hureninparamaribo.nl/index.html and you have this other page with all your content named:http://www.hureninparamaribo.nl/index.htm your server displays the html file then delete the index.html page form rename the index.html page content

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/4390439#4390439

  To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/4390439#4390439. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion in Dreamweaver, by e-mail or at the Adobe Forums

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.

• Need help with Dreamweaver Divs

  
  This is a clip of my site that I do, is not yet online.
  But what I need help with the div, as you can see the div with the blue text overlaps a Fireworks html banner I made.
  Anyway I can fix this so that the Fireworks banner goes over the div instead of the other way around?
  Any help is thanked!

  It is a problem with the stacking order.  Your division of the blue text takes precedence over your menus rollover.

  Please read on z-index.

  http://www.smashingmagazine.com/2009/09/15/the-z-index-CSS-property-a-comprehensive-look/

  For answers, we need a link to the page to test your site.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Need help with auto-fill the fields

  Hello

  I need help with a form that has multiple pages.  I have some areas I are duplicated in my document.  How I got these fields auto fill throughout the form/paper? For example, I'm going to fname lname, address, telephone, etc... How can I get these fields automatically on the other pages of the form?  Is this possible?  Any suggestions are welcome.

  Thank you in advance.

  If it's just a fill operation then make sure the fields have the same name. Then set the binding to the global level and all the fields with the same name will get the same value.

  Paul

• Need help with Flash - really basic!

  Hi, I really need help with Flash and quick. I have to create an auto-run cd, but before I can create that, I have to make everything works! I took a class in College Flash, which up to 1 1/2 ago so im kind of knowledge missing!
  
  My first problem is as follows:
  I have the homepage, and it contains a button English and french.
  When you click on buttons, it brings you to the next page, either resourcesFr or resourcesEn.
  I tried to use the loadMovie script but and it works but the new page loads on the home page you can still see the English/french under buttons. How can I fix? I know its simple but I am short on time... Should I still use the loadMovie script?
  
  My other problem is that im trying to have another button to link to a folder. Use the script for getURL for this as well?
  
  Help!

  I was able to solve my problem... it was only the forward slash that were in the wrong way... so the correct code is:

  on (release) {}
  DRV = _url.substr (8.1);
  getURL (drv + ": / English/brochures");
  }

  Only took me 5 days... I think I need to buy a script book action! Laughing out loud

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.

• HP laptop: need help with internet and search for things

  whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request

  Yes it's a Windows 10 and it arrived already installed I'll take the other info now

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• need help with my window is in thai and I do not understand to all.how to convert to English?

  need help with my window is in thai and I don't quite understand.
  How to convert to English? I tried for days but still it cannot be changed.
  because I can't read thai... Please help me step by step...

  my pc is touchsmart 9100 windows 7 Professional.

  Not a single word is in English if I go to the "region and language" to change.

  Everthing is in thai in the system.

  Hello

  Where have you bought the PC?

  What is the operating system installed?

  Best regards

  ERICO