Need help with the Windows Update Agent 7.4.7600.226

Similar Questions

• The Windows Update Agent 7.4.7600.226 and impossible to verify updates

  Given that 13 of November were not able to update Windows. Updated Windows Update Agent 7.4.7600.226 failed and statement "Windows cannot check updates' appearred. Error code 80070643 received. I have Vista Home Premium 64-bit.

  I tried many things and even worked with Microsoft customer Supportb without success. When I restart my computer, it tries to configure the updates, but does not nd comes back to the previous configuration. I also tried to download the last Agent to update from the Download Center, but it fails and gives me the 80070643 error code.

  Does anyone have a solution for this?

  jhefer3 wrote: My virus protection and Internet security is provided by Norton 360, is underway and is updated automatically successfully.

  I used the fix tool, but not in the aggressive mode. I have not tried a reset because many of the reset of values seem to be for 32-bit machines.

  Another version of Norton 360 (i.e., N360 2008) has already been installed on the computer?

  A Norton or McAfee free trial come preinstalled on the computer when you bought it?

  The FixIt and reset are the same thing. Open an instance of IE 32 bits (not IE 64-bit) for http://support.microsoft.com/kb/971058, click the FixIt icon and choose Aggressive mode this time. (Believe me, the utility "know" that you are running 64-bit Windows.) ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• New error causing the Windows Update Agent 7.6.7600.320 80246002 during the search for updates

  I use Windows 7 64-bit with Service Pack 1. Windows Update worked fine until the Windows Update Agent is automatically updated to 7.6.7600.320 in August 2014. Now, when Windows Update tries to search for updates, it reports "Windows could not search for updates" and indicates that the 80246002 error code was received.

  [UPDATE]  Since posting this query, I think I solved my problem by following the instructions described on the page "Update tool of the system for Windows 7 for x 64-based Systems (KB947821) [may 2014]."   I downloaded the file (Windows6 1 - KB947821 - v33 - x 64.msu) and then let it settle. He describes himself as "Fix for Windows (KB947821)".  The installation took awhile, with a lot of disk activity.  When he finally finished, I rebooted my machine and tried an update of Windows. It seems to work fine; He even found a significant update that I then installed successfully.  So apparently my problem the hotfix for Windows (KB947821) provided the solution.

  [UPDATE 2]  After seeing the messages on the change the DNS to resolve the problem, I thought I would add the following information where it is necessary:

  • I use the 64-bit version of Internet Explorer 11 and confirmed it works in 64-bit mode by inspecting the user agent of the browser.  You can check the user agent of your browser by visiting http://user-agent.me/
  • My Internet Protocol properties are set to 'Obtain DNS server address automatically'.  It works with my wireless router, and I've never tried to change it.

  [UPDATE 3]  After thinking I was safe, after doing several searches for updates, the returned 80246002 problem on my machine!  I rebooted my machine and my wireless router, but it did not help.  So, I advanced and tried the DNS thing: I changed the favorite 8.8.8.8 DNS server and another server DNS 8.8.4.4 and then rebooted.  Search on Windows Update is now successfully!  I am humbled and grateful!

  In my case, I got the window update 80246002 error code after I uninstalled KB2982791 according to the https://technet.microsoft.com/library/security/MS14-045 and then tried the updates.  I have nothing clears the error (ipconfig/flushdns, rename the folder C:\Windows\SoftwareDistribution, a few MS Fix, etc...).  KB2993651 being the replacement update I was trying to download and install, I decided to manually download the update from the windows update (http://catalog.update.microsoft.com/v7/site/Search.aspx?q=KB2993651) catalog.  After you downloaded and installed KB2993651, I rebooted the PC and then I was able to check Windows updates again without entering the 80246002 error code.

• Need help with a Windows update it please...

  03/15/13, we had a storm, and when well even I had a surge protector for a reason, he put my date one (1) year until 15/03/14 which I didn't notice at the time, so when I started my pc, he had a update installtion, which was the following: good security for Windows Vista (KB2807986) update less say , my pc was a bit confusing, because until what I changed the actual date in the BIOS?  She had always installed this update for 2014, so my pc and the browsers would not work correctly until I changed the date.  But in the meantime, the correct installation of the certain this update was never made...  So, I need help on what to do.  How to remove this update? Or should I leave and just manually install the update correct?  According to what it is, I need help on how to do it and where to find the correct update?  Can someone help me please?  and thank you!  I have Windows Vista Ultimate 2007 ServicePack2 32bitOS

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. what exactly is the problem that you are facing as a result of this update?
  2. do you get an error message?
   
  I suggest you to install this update manually and check:
  Reference:
  Update security for Windows Vista (KB2807986)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=36915
   
  See also:
  Remove an update
  http://Windows.Microsoft.com/is-is/Windows-Vista/remove-an-update
   
  I hope this helps.

• The Windows Update Agent 7.6.7600.320 is suspended

  I'll have to re - install (to be clear, this must be a clean install!) Win 7 because I upgraded my processor (DUUH!). Then, of course, there are 6 years of updates to apply (DUBBLE DUUH!). In any case, after the first 25 or so (including SP1), the computer restarts and the next time I run the update of victory, it updates the agent update to 7.6.7600.320, closed, opens again and therefore, it crashes every time that the search for updates. I tried everything on line fix - it tools (2 or 3 they say they found things and that fixed it, but not true.) Their execution several times in a row gives the same merry messages - but ill -!) and even downloaded and installed Agent.256 manually, but once installe.320, something on the PC side of things is broken. Even the autonomous utils as "X 86 - all - Windows6. "1 kb2993651 - x86_a3d4402e414cd9ee28244c8ffbed52bf8d10f40d.msu" crashes (looking for updates on my PC) the same way. I tried the DNS fix, but the problem is local. Update impossible to find something he's looking for on my hard drive or RAM is missing a few "helper". Help! Thank you!

  I had the same problem two nights ago, with agent.256 on Vista. I tried everything and nothing worked, I even restarted Vista from scratch, but the same problem was there, once the agent has been installed. All I can advise is to check for updates, it will finally find a set of updates for you. I found a post saying to leave so I did it and for me, it took more than 4 hours to find the updates for me, but once this set of updates have been installed it only took 5 minutes to an hour for updates to appear. It must be something to do with new agents and how they are in communication with Microsoft for the first time. They should really look into it well.

  Be patient and good luck!

• Need help with the Windows Vista Start Menu

  So, I turned on my computer today and clicked on the start menu, I expanded the tab all programs and was shocked to see that it was empty. Tab Assecories, Extras and upgrades, games, all of them, all tabs have disappeared. Is any way to restore? I don't know how to get to the Defrag disk or cleaning disc or one of these things without it. Help, please!

  -Tim

  A plus for you to try.

  It still happens today. Yes?

  Why not do a system restore.

  Choose 2 days ago, or a date then your list of all the programs worked as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• I need help with the following updates. I get an error code "646".

  Update of security for Microsoft Office 2007 (KB951550)

  Update of security for Microsoft Office Excel 2007 (KB978382)

  Update of security for Microsoft Office System 2007 (KB951944)

  Update of security for Microsoft Office System 2007 (KB978380)

  The 2007 Microsoft Office Suite Service Pack 2 (SP2)

  Update for the junk e-mail in Outlook 2007 (KB979895) filter

  Update for Microsoft Office System 2007 (KB967642)

  Manually download each update here:

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB951550&displaylang=en&stype=s_basic

  and install the same.

  TaurArian [MVP] 2005-2010 - Update Services

• Problem with the WIndows Update page

  I am running Windows XP with Service pack 3. Microsoft Security essentials is the security system. When trying to run Windows Update using Internet Explorer 8, at the point of the page is to check that if my system is the correct update software, the page fails, finally displaying the message "Internet Explorer has stopped to try to restore this Web site. It seems that the Web site continues to be a problem. "This is repeated each time I have repeat the initial attempt, or click 'Back to the microsoft.com site' on the error page. Is the problem with the Microsoft web page (the address is www.update.microsoft.com/microsoftupdate/v6/default.aspx ) or on my computer?

  When I try to run Windows Update... to the point that the page is to check If my system is correct, update software the page can't...  Is the problem with the web page of Microsoft ( www.update.microsoft.com/microsoftupdate/v6/default.aspx ) or on my computer?

  You are correct George: whenever you access the site Windows or Microsoft Update, Windows Update will take care of updating itself. that is, it looks for updates available from the Windows Update Agent or the customer allows you to update your system.

  Since June 21, 2012 a WUA new version 7. 6. 7600. 256 aired by WU to automatically update itself its version now aged 7. 4. 7600. 226 .

  The problem you see may occur when there is a version mismatch of the file with the Windows Update Agent files, which is a mixture of old files with the new files. This is due to an installation "or damaged."

  You can take a look at your windowsupdate.log file located in your WINDOWS directory, to check the error codes - missing files or failling updated files (especially c:\windows\system32\wuapi.dll, wups2.dll, c:\windows\system32\wups.dll or wuweb.dll).

  You must re-register or re - install files WU in order to obtain the Service Windows Update works again. Try here:

  http://support.Microsoft.com/kb/958053

  And

  http://support.Microsoft.com/kb/949104

  Trust that this assistance.

• Need help with the error in windows update 80244019 is urgent please

  Please I need help urgent problem error update.

  I have a Dell Inspiron 1564, running Service Pack 1 of Windows 7.   I tried several times to update windows and nothing, just appears this error: Code 80244019, tried to install the Windows update agent and pops up the same error., NetFxRepair tool and nothing, FixDotNet, and nothing.  Did a recovery to the fabric (by default) and nothing.   About 2 years ago, I disabled the update and about 2 months ago I tried to update and I forgot the error. Now I need to reinstall all my programs, in the hope that with a recovery, it will fix the error and thrust my laptop, but now is worse, because the installation of updated doesn´t work, Corel Draw X 4 doesn´t supposed error of .NET Framework, so I tried the fixdotnet and netfx repair tool, but nothing. I need to work and I have can´t I have only a portable empty with an outdated windows. Help, please!

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  or

  Cannot install updates in Windows...
  http://support.Microsoft.com/kb/2509997

• I can't get updates since SP2 installation and update of the Windows Update Agent.

  I have Vista Home Premium 64-bit.  I have done 3 installs clean for several days and each time I install SP2 and update the Windows Update Agent I can't get updates.  When I click search for updates, it just keeps looking for hours and hours and never stops looking.  I tried several solutions on the internet, including those found here.  Of course, the first thing I did was run the Fixit of Windows Update tool.  He could not solve any problems found.  He gave the error code 0 x 80070005.  I installed the SubInAcl.exe and run several different command text and a text of the batch.  The batch text did nothing.  The texts of order had errors of syntax and a file, he could not access.  I ran the System File Checker, and it finds errors, it could not fix.  I just did a clean install on this machine 6 or 8 months ago because I was going to get rid of the computer, so when I put in place I used the username user.  I came across no problem at all when I installed the operating system and update everything.  Since then, I decided to keep the computer, so I wanted to have it in my name.  As I said, this is my 3rd try.  I am willing to give.  Maybe someone here can help.

  I tried two clean installs and I get the same thing.  Once I have installed SP2 and the new Agent update, I can't get more updates.  It keeps only the search for hours without results or error messages.  I tried all of the suggestions I found on the internet, but nothing works.  I get always the same error code 0x80070005, when I run the Fixit of Windows Update tool.  There must be a way to solve this problem.  Why I was able to do a clean install of 6 or 8 months without any problems, but now I can't.  It makes no sense at all.  I really hope someone who knows the answer reads this.

  Ralph C.

  I finally got it!  I tried two other proposed solutions, then I ran the System File Checker, which is no problem, then I ran Check Disk.  Check disk found and repaired files in the file system of BITS among others.  After that, I'm now completely up to date with Windows Update.  I was ready to give up.  I'm glad I did not.  For anyone else having similar problems, don't give up, the answer is there.

  Ralph C.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• need help with my window is in thai and I do not understand to all.how to convert to English?

  need help with my window is in thai and I don't quite understand.
  How to convert to English? I tried for days but still it cannot be changed.
  because I can't read thai... Please help me step by step...

  my pc is touchsmart 9100 windows 7 Professional.

  Not a single word is in English if I go to the "region and language" to change.

  Everthing is in thai in the system.

  Hello

  Where have you bought the PC?

  What is the operating system installed?

  Best regards

  ERICO

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Anyone know if there is a problem with the "Windows Update" site? Since May 11, 2010...

  Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now.  I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback...  Thank you!
  ~ Jenifer

  It is without a doubt.  There were a few patches published today, and I was able to update all my machines successfully.  This looks more like a virus problem.  Have you run a virus scan recently?  Many times, if you are infected the virus will prevent you to access Windows Update.

  You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058.  This could also be your problem.

  Let me know how it goes,

  Barbara

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.