The Windows Update Agent 7.4.7600.226 and impossible to verify updates

Similar Questions

• New error causing the Windows Update Agent 7.6.7600.320 80246002 during the search for updates

  I use Windows 7 64-bit with Service Pack 1. Windows Update worked fine until the Windows Update Agent is automatically updated to 7.6.7600.320 in August 2014. Now, when Windows Update tries to search for updates, it reports "Windows could not search for updates" and indicates that the 80246002 error code was received.

  [UPDATE]  Since posting this query, I think I solved my problem by following the instructions described on the page "Update tool of the system for Windows 7 for x 64-based Systems (KB947821) [may 2014]."   I downloaded the file (Windows6 1 - KB947821 - v33 - x 64.msu) and then let it settle. He describes himself as "Fix for Windows (KB947821)".  The installation took awhile, with a lot of disk activity.  When he finally finished, I rebooted my machine and tried an update of Windows. It seems to work fine; He even found a significant update that I then installed successfully.  So apparently my problem the hotfix for Windows (KB947821) provided the solution.

  [UPDATE 2]  After seeing the messages on the change the DNS to resolve the problem, I thought I would add the following information where it is necessary:

  • I use the 64-bit version of Internet Explorer 11 and confirmed it works in 64-bit mode by inspecting the user agent of the browser.  You can check the user agent of your browser by visiting http://user-agent.me/
  • My Internet Protocol properties are set to 'Obtain DNS server address automatically'.  It works with my wireless router, and I've never tried to change it.

  [UPDATE 3]  After thinking I was safe, after doing several searches for updates, the returned 80246002 problem on my machine!  I rebooted my machine and my wireless router, but it did not help.  So, I advanced and tried the DNS thing: I changed the favorite 8.8.8.8 DNS server and another server DNS 8.8.4.4 and then rebooted.  Search on Windows Update is now successfully!  I am humbled and grateful!

  In my case, I got the window update 80246002 error code after I uninstalled KB2982791 according to the https://technet.microsoft.com/library/security/MS14-045 and then tried the updates.  I have nothing clears the error (ipconfig/flushdns, rename the folder C:\Windows\SoftwareDistribution, a few MS Fix, etc...).  KB2993651 being the replacement update I was trying to download and install, I decided to manually download the update from the windows update (http://catalog.update.microsoft.com/v7/site/Search.aspx?q=KB2993651) catalog.  After you downloaded and installed KB2993651, I rebooted the PC and then I was able to check Windows updates again without entering the 80246002 error code.

• Where can I find the Windows Update for Windows 7 Agent?

  I know that the WindowsUpdateAgent30 - x 86 .exe is available on the microsoft Web site, but there is also a message that this may not be applicable for windows 7.  Then there is mention please check the site of solution of windows 7.

  Does anyone know if we continue to use the existing as much as we used with Windows XP?

  It is one of the files required or suggested for the execution of the MBSA in offline or without internet access online.

  Thanks in advance!

  WUAgent v7.4.7600.226 must be preinstalled on your computer with Win7. Is it not the case?

  Information for network administrators about how to obtain the latest Windows Update Agent [good for Win7, too]
  http://support.Microsoft.com/kb/946928

  How to upgrade the Windows Update Agent version

  https://support.Microsoft.com/en-us/KB/949104 [Version 40, 0-24 December 2014]

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  [Last updated - August 15-16, 00:16 UTC]

• How to find out the Windows Update Agent version I am running

  Anyone know how I can find out which version of the Windows Update Agent I use?  I checked everything and no menu where only allows me to check the version.  This link http://support.microsoft.com/kb/949104 tell me how to get the latest version, but it is not to tell me how do I know if I am running on the latest version.
   
  And what makes it reset my of update windows components?  I read this link (http://support.microsoft.com/kb/971058#appliesto) and understand how to reset components, but I'm not clear on how this will affect my windows update.

  I have Windows Vista Home, SP2.

  Thank you very much!

  Ohanna Hello,

  Thank you for using the Microsoft answers Forums.

  Determine the current Version of WUA:

  Determine the version of Windows Update Agent (WUA) before using it. The current version of WUA is determined by the version of the c:\windows\system32\wuaueng.dll that runs in the current installation of Windows \System32 directory. If the c:\windows\system32\wuaueng.dll is version 5.4.3790.1000 or a later version, WUA is installed. A version earlier than 5.4.3790.1000 indicates that the Software Update Services (SUS) 1.0 is installed.

  When a call is made for SUS 1.0 using the API INTERFACE, an HRESULT of WU_E_AU_LEGACYSERVER is returned.

  You can also use the IWindowsUpdateAgentInfo::GetInfo method to retrieve the latest version of file of the c:\windows\system32\wuapi.dll that runs on a computer. The IWindowsUpdateAgentInfo interface is not supported in WUA 1.0.

  For more information, see update the Windows Update Agent.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments.

• I can't get updates since SP2 installation and update of the Windows Update Agent.

  I have Vista Home Premium 64-bit.  I have done 3 installs clean for several days and each time I install SP2 and update the Windows Update Agent I can't get updates.  When I click search for updates, it just keeps looking for hours and hours and never stops looking.  I tried several solutions on the internet, including those found here.  Of course, the first thing I did was run the Fixit of Windows Update tool.  He could not solve any problems found.  He gave the error code 0 x 80070005.  I installed the SubInAcl.exe and run several different command text and a text of the batch.  The batch text did nothing.  The texts of order had errors of syntax and a file, he could not access.  I ran the System File Checker, and it finds errors, it could not fix.  I just did a clean install on this machine 6 or 8 months ago because I was going to get rid of the computer, so when I put in place I used the username user.  I came across no problem at all when I installed the operating system and update everything.  Since then, I decided to keep the computer, so I wanted to have it in my name.  As I said, this is my 3rd try.  I am willing to give.  Maybe someone here can help.

  I tried two clean installs and I get the same thing.  Once I have installed SP2 and the new Agent update, I can't get more updates.  It keeps only the search for hours without results or error messages.  I tried all of the suggestions I found on the internet, but nothing works.  I get always the same error code 0x80070005, when I run the Fixit of Windows Update tool.  There must be a way to solve this problem.  Why I was able to do a clean install of 6 or 8 months without any problems, but now I can't.  It makes no sense at all.  I really hope someone who knows the answer reads this.

  Ralph C.

  I finally got it!  I tried two other proposed solutions, then I ran the System File Checker, which is no problem, then I ran Check Disk.  Check disk found and repaired files in the file system of BITS among others.  After that, I'm now completely up to date with Windows Update.  I was ready to give up.  I'm glad I did not.  For anyone else having similar problems, don't give up, the answer is there.

  Ralph C.

• Problem with the WIndows Update page

  I am running Windows XP with Service pack 3. Microsoft Security essentials is the security system. When trying to run Windows Update using Internet Explorer 8, at the point of the page is to check that if my system is the correct update software, the page fails, finally displaying the message "Internet Explorer has stopped to try to restore this Web site. It seems that the Web site continues to be a problem. "This is repeated each time I have repeat the initial attempt, or click 'Back to the microsoft.com site' on the error page. Is the problem with the Microsoft web page (the address is www.update.microsoft.com/microsoftupdate/v6/default.aspx ) or on my computer?

  When I try to run Windows Update... to the point that the page is to check If my system is correct, update software the page can't...  Is the problem with the web page of Microsoft ( www.update.microsoft.com/microsoftupdate/v6/default.aspx ) or on my computer?

  You are correct George: whenever you access the site Windows or Microsoft Update, Windows Update will take care of updating itself. that is, it looks for updates available from the Windows Update Agent or the customer allows you to update your system.

  Since June 21, 2012 a WUA new version 7. 6. 7600. 256 aired by WU to automatically update itself its version now aged 7. 4. 7600. 226 .

  The problem you see may occur when there is a version mismatch of the file with the Windows Update Agent files, which is a mixture of old files with the new files. This is due to an installation "or damaged."

  You can take a look at your windowsupdate.log file located in your WINDOWS directory, to check the error codes - missing files or failling updated files (especially c:\windows\system32\wuapi.dll, wups2.dll, c:\windows\system32\wups.dll or wuweb.dll).

  You must re-register or re - install files WU in order to obtain the Service Windows Update works again. Try here:

  http://support.Microsoft.com/kb/958053

  And

  http://support.Microsoft.com/kb/949104

  Trust that this assistance.

• the location where the Windows Update stores data has changed and needs to be repaired. How to repair?

  This statement appears when the windows update don't load new updates.  In addition, I can't turn on Windows automatic updates. Windows XP SP3

  This statement appears when the windows update don't load new updates.  In addition, I can't turn on Windows automatic updates. Windows XP SP3

  Try...

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

• How can I get the windows update? X8024400A error)

  I did a restore after my pro windows xp crashed now can't do windows update! How can I get the windows update? I get an error from the site Web has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. X8024400A error)

  Please help me!

  I could not download my favorite Antivirus unable to get updates.  Only a few site I couldn't even. It seemed to get worse until:

  I fould a place that gave me these instructions:

  1. Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • Regsvr32.exe atl.dll
     • Regsvr32.exe urlmon.dll
     • Regsvr32.exe mshtml.dll
     • Regsvr32.exe shdocvw.dll
     • Regsvr32.exe browseui.dll
     • Regsvr32.exe jscript.dll
     • Regsvr32.exe vbscript.dll
     • Regsvr32.exe scrrun.dll
     • Regsvr32.exe msxml.dll
     • Regsvr32.exe msxml3.dll
     • Regsvr32.exe msxml6.dll
     • Regsvr32.exe actxprxy.dll
     • Regsvr32.exe softpub.dll
     • Regsvr32.exe wintrust.dll
     • Regsvr32.exe dssenh.dll
     • Regsvr32.exe rsaenh.dll
     • Regsvr32.exe gpkcsp.dll
     • Regsvr32.exe sccbase.dll
     • Regsvr32.exe slbcsp.dll
     • Regsvr32.exe cryptdlg.dll
     • Regsvr32.exe oleaut32.dll
     • Regsvr32.exe ole32.dll
     • Regsvr32.exe shell32.dll
     • Regsvr32.exe initpki.dll
     • Regsvr32.exe c:\windows\system32\wuapi.dll
     • Regsvr32.exe c:\windows\system32\wuaueng.dll
     • Regsvr32.exe wuaueng1.dll
     • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
     • Regsvr32.exe c:\windows\system32\wups.dll
     • Regsvr32.exe wups2.dll
     • Regsvr32.exe wuweb.dll
     • Regsvr32.exe qmgr.dll
     • Regsvr32.exe qmgrprxy.dll
     • Regsvr32.exe c:\windows\system32\wucltux.dll
     • Regsvr32.exe c:\windows\system32\muweb.dll
     • Regsvr32.exe c:\windows\system32\wuwebv.dll
  2. Reset Winsock. To do this, type the following command at a command prompt and press ENTER:
     netsh winsock reset
  3. If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
     Proxycfg.exe d
  4. Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net start bits
     • net start wuauserv
  5. If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
     Bitsadmin.exe/Reset /allusers
  6. Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
  7. Restart the computer.

  After doing these, well most of them work. When I clicked on OK, but some are not. All of this worked!   I was able to update.  I was about to throw my computer!

  I don't know the tip you give here would have worked more quickly.  I just couldn't not here. Something was originally internet Exployer of do not leave me here.

  I had to work on him. Now everything seems to work very well. I have sort of my breatgh again and wory that error could haoppen again.

  1 million for your help thanks. It's great to have a place like this with pro like you here.  Much appreciated by a non pro like me.  Great place to learn more about computers.

• Unable to get the windows updates, it returns an error (often 0x8007043c and other similar)

  Original title: can't get windows updates

  I was unable to get the updates of windows - via the feature of automatic update, or through the manual method to access microsoft.com.  When I go to the microsoft update Web site, and it starts to scan my PC, it returns an error (often 0x8007043c and similar).  I tried to run Microsoft FixIt.  It tells me that windows up-to-date devices require to be repaired, but when I run the repair (problem-solving), he continues to run for hours and hours and doesn't do a thing.  How can I remove the software from the Windows Update Agent from my PC and reinstall a new version?

  Hi JosephGPhD,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

   

  Method 2: If the method above does not help then you can see the article mentioned below and check.

   

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• When I try to access the windows update I can not I receive a message to install the activex control

  Update.Microsoft.com/microsoftupdate/v6/default.aspx

  Hello
   
  What is you receive the exact error message?
  How long you have been facing this problem?
   
  Try methods that can help you solve your problem below:

  Method 1: You can try resetting Internet Explorer and look for the question:

  Reset Internet Explorer 8 settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-8-settings

  Method 2: Install the latest version of the Windows Update Agent.
  Reference: http://support.microsoft.com/kb/949104

   

• whenever I try to install the windows update I get error 00000646, the error message

  Ideas:

  • You have problems with programs
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2

  Read the info on the above link to error Code 646.

  With the compliments of: David_O - Support Engineer

  This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2

  Method 1: Save the Windows Update files

  1. click Start and type notepad in the box start the search .

  2. click on Notepad in the programs list.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on the file menu, click on record under.

  2. in the list record under , click all files.

  3. in the file name box, type register.bat.

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then click run as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click continue.

  6. try to install the updates again.

  Method 2: Download and install Windows Update agent

  For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:

  949104

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not help:

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES

  Original title:

  dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES, more problems with windows update. May HAVE a PROBLEM WITH REGISTRATION BUT DO KNOW NOT if this msi I HAVE HELPED.

  I have windows 7 x 64 Version 6.1.7600.16385. My windows update has only downloaded and installed a fix (KB947821 on 22/03/14. In the event err log # 2147942487command line: "C\:WINDOWS\SYSTEM32\WUSA '". "»» "EXE" "Windows Update Troubleshooter said" search for missing or corrupted files. I did a sfc/scannow and everything was fine, that the settings are incorrect... Went to computer management by looking at the windows log. Event ID was found in respect of the implementation of 3. Looks like I've lost all my updates. Window update is only showing KB947821 HOT of difficulty. All my other downloading updates for the past two weeks included Microsoft Office Update that I can't see anything there all gone. I check the installed updates and 14 updates that don't settle all gone. Windows Update indicates any problem or error #. It says Windows update installed "Never". I tried the solution to the difficulty of corruption problems MSI software update registration. Help I don't know where to go from here. I ran the windows Memory Diagnostic tool, which came with no error. In the community he sent me to back registry which I do not know how to do. Can I save on my hard drive or another source. He says type reedit32.exe. I have the windows 7 registry editor wants me to save the registry key or subkey > I do not know what files to back up or export. I'm not computer savvy, but I do what I can do better. Had problems with windows update not install and now not download or install 2 MOS. So where and how can I know what updates I need after that this problem is corrected.  Thank you

  If you want Office 2007 updates to appear in the installed updates again, you would need to uninstall/reinstall Office 2007 and install all the updates again.

  Assuming that Office 2007 is installed & working properly and no update is offered when you run a manual check for updates now, you might want to leave enough alone (that is, do nothing) - then see if the 2 updates for Office 2007 SP3 be released next Tuesday (a) receive, (b) successfully install and (c) are listed in the installed updates later.

  PS: The possible causes of the problem are messing with registry cleaners, messing around with the Software Distribution folder, and the fact that it was a computer refurbished when you bought it.

• HP Z800: HP Z800 refreshed win 7 pro 64... do not finish the windows updates...

  HP Z800 refreshed win 7 pro 64... do not finish the windows updates...

  Newly installed OS - everything seems to work fine, except for the shot without end to WIndows update... Verification of updates. Apparently, this affects the update of Windows 10 as well. Someone at - it ideas? I tried all the options via the site help MS. Merci.

  Greetings,

  Please read this.

  You can wait patiently (updates will appear later) or there is a problem in the article.

  You need to reinstall Windows for the fix. Your PC must be isolated from the network when reinstalling windows. You need to download both updates and install before connecting your PC to the network.

  I used the fix of Ed Bott and it works. But I reinstalled Win 7 again. I wasn't going to wait for hours and hours to get the security updates.

  You can try to install these updates on the problematic installation of Win 7:

  1. apply the Microsoft patch found here. Disconnect from the network.

  2. install the two updates in offline mode and cross your fingers.

  3. repeat on Windows Update.

  See you soon!

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Cannot access the Windows Update Site

  Search engine links redirect us to different sites, not associated.  I get an error message - the connection was reset - when I try to access MS Windows security updates.  I do not know how to find the problem, when I can't access resources Ms.

  You can try:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If not post back with more information, like what Windows operating system you use including Service Pack level, what security software you use and error messages that are related to the update that is causing problems.

  Thank you.

  TaurArian [MVP] 2005-2011 - Update Services