Need permission for everyone to copy a .dll file
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- When I try to copy the file from a specific image in a folder, he replys, it isn't possible, that I need permission to do it!
- Has already given the full control permission to the group "everyone". Didn't work...
- Already installed a .reg file for appropriating a folder... didn't work.
- I disabled my antivirus because it said that the file is a virusand I know that it is not.
- What can I do to copy the file? Why doesn't it block this file!
Well, it's a lot more information!
Copy of the file so that your virus protection believes that it is a virus won't do you much good. At best your virus scanner will keep nagging you about the file. At worst, it will quarantine or delete it.
You can likely copies the file to its destination in Mode without failure. Please post again if you need more detailed instructions.
Tags: Windows
Similar Questions
-
File access denied: you need permission to everyone to make changes to this file
Hello. When I try to delete a file on an external hard drive on a network, I get this error message:
"File access denied: you need permission to everyone to make changes to this file."I tried to take possession of the file, but there is no security or any other option to do. Here's what I see when I click on properties:In general, details, previous VersionsUnder "Details", the owner is listed as "Everyone". At the bottom of the box, there is a link "remove properties and personal information." If I click on that I have two options: 'Create a copy with all of the properties deleted' or "Remove the following properties from the file." If I select "owner" and click ok, nothing happens - the owner is always listed as "Everyone" and I can't delete it.I am running windows 8.I am the administrator.Thanks in advance for your help.DougStep 1: Open the file properties
Step 2: Open the security option, and then click on allow list of user options and select your user name.
Step 3: Select allow and any other option. Then, closed.
Step 4: then open the file again. Now you can remove it.
Hope that it will workzzzz...
-
you need permission to everyone to make changes to this file
Hi, all, I tried to copy a .dll file from an image to (x 86) /dossier program files, but I got the error above. I tried to disable UAC and logon as admin account, to make the copy, but failed, so what can I do? I use win7 ultimate x 64.
see you soonDaiyueHi, this means that I can't Tróchez on the .dll file in the destination folder.
the problem has been solved, the antivirus has locked the file.see you soon -
original title: require authorization of the SYSTEM
I decided to do a clean install of the latest Windows 7 RC yesterday and today crossed and have started to remove some programs on a separate hard drive so I could reinstall their own. However when I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file. I am using an administrator account, but I can't just simply delete the file. I tried going to and change the owner to my account or administrators, close it, change the security permissions to allow me to have full control, and then I can finally remove it. The problem is, I have to do for all the files one by one in the folder, and I wonder if there is an easier way to go about this, or if I can access the user of this SYSTEM and just delete them all from there. Thanks for the help.
Hello
Not trying to resurrect the old discussions, but I'll answer anyway because this thread came on top of the list of search results when I searched for "you need permission to the SYSTEM; I hope this will help everyone.
Note: here, "the record" as a subject refers to the folder that you want to remove.
Step 1: Go to the built-in Administrator account, you can do so by following these steps:
a. go to control panel > system and security > administrative tools
b. on the left panel, go to local users and groups > users. You should now see a list of users on your computer
c. right click on the administrator account that appears in the list and select Properties
d. uncheck "account is disabled" and confirm by pressing OKStep 2: Connect to your newly activated administrator account
Step 3: Now, we start to configure the security settings that will allow you to remove this folder which was (perhaps) held by the SYSTEM:
I'm going to make the assumption that you want to remove a folder and all its subfolders along
a. right click on the folder
b. go to the security on the top tab
c. click on the Advanced button which is at the bottom: Step 4 the first part to configure security settings to set the owner of the folder:
a. go to the owner on the top tab
b. click the button change located downstairs
c. There should be a list of accounts to choose to change the property, this is located under the label "of a change in ownership:'"
(d) the entry 'Administrator (YOURCOMPUTERNAME\Administrator)' should be there; If this isn't the case, then add it to the list:
-Click on the button "other users or groups...". "who's down
-Under the label "enter the object name to select (examples):', there should be a text field you can type into it;" type in "Administrator" (without the quotes of course)
-Click on the "Check names" button which is located on the right. 'Administrator (YOURCOMPUTERNAME\Administrator)' should now be there _For itself_; Well, if not, then you must remove the line that does not represent the administrator account that you are currently
-Confirm by pressing OK; It will now appear on the list of accounts, you can choose from
e. now, select 'Administrator (YOURCOMPUTERNAME\Administrator)' from this list
f. check 'Replace the owner of subcontainers and objects' to propagate our change
g. press OK to confirm. a message should now pop-up window, which says to re - open the properties. Do by pressing all the buttons OK see youStep 5: now that we have the owner of the folder, we still not done. There is one crucial step left which is to remove permissions inheritable:
a. Repeat step 3 to learn to re - open properties and get to "Advanced security settings"
b. go to the permissions on the top tab
c. click on the button "Change permissions" which is down
d. at the bottom, there should be 2 check boxes:
-' Include the permissions that can be inherited from the parent to this object': deselect this. When you do so, you will get a warning on the parameters of parent is not not able to spread. Select 'Add '.
-' Replace all permissions of child object with permissions inheritable this object': check this
e. press OK to confirm. Windows will warn you this time; Click OK
f. reconfirm by pressing OK; now, you should get to properties againNow, you shouldn't have all the warnings about the SYSTEM do give you permission as he attempted to perform actions on this issue.
All the boxes to change the permissions on the accounts (properties > Security > Edit) must now be enabled, and you can tinker around with it. -
Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him. Thank you very much
Hey ihorl18351266,
Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.
Kind regards
Ana Maria
-
Apps need permission for photos and videos
When I try to open the album, app need approval, I can Skype msg, what'sap and masenger, but I can't call and I can't oupn photos and videos, apps shows me a msg for need permission, but I can't solve this
You activate this permissions but probably try that
settings > apps > Search apps > clear data > reboots the phone > check again.
-
I am logged as singular Vista user. I can't delete files... impossible to install programs, etc... He always says access denied and I need permission... I'm the only user with UAC disabled. What is the problem?
Hello
Just a few questions:
[1] which version of Vista you are running?
[2] which folder you are trying to delete?Click the button START/Pearl and in the LINE RUN type "cmd" (without the quotes) and press ENTER.
Once in DOS:
Type "winver" (without the quotes) and press ENTER.
This will give you the exact version of Windows you are using.Also, copy and paste everything between the lines in the BACK window.
Whereis the account you used.
-----------------------------------------------------------------
net localgroup administrators/ Add -----------------------------------------------------------------Then log in as you and try again.
If it does not go back in the DOS window
Click the button START/Pearl and in the LINE RUN type "cmd" (without the quotes) and press ENTER.Once in DOS mode copy and paste everything between the lines in the BACK window.
--------------------------------------------------------
NET user Admin Password1 / add
net localgroup administrators Admin / add
net localgroup users Admin/delete
--------------------------------------------------------This will create a user called "Admin" with the password "Password1" and will only get the user to an administrator.
Log in as user name and try again.If you can't always do what you want to do, let know us and we will continue to try to help.
~ Engineer Support Microsoft Scott answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
You need permission to everyone to make the change to this file
Hello! Above is the error that I... I tried to download the registry of property take, but it seems that it does not work. (When you click on 'ownership' it comes up with a command prompt and in about 0.5 seconds it closes immediately.) What is the solution? (I have a 64-bit windows 7).See the link below
http://TechNet.Microsoft.com/en-us/library/cc753659.aspx
It may be useful
-
Missing for HP laptop camera - CtrlFactory.dll file. How can I installit?
Audit of software informs me that this webcam does not contain this file (CtrlFactory.dll). File downloaded, but where do I install it in Windows 7?
Hello
Thanks for posting your question in the Microsoft Community forum.
It seems that you have a problem with opening HP laptop camera software and will receive error message CtrlFactory.dll missing.
I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
I may need a few more details to better understand the issue.
1. did you of recent changes on the computer before this problem?
2. What is the HP laptop model number?I suggest you to uninstall and reinstall the webcam software that will automatically install all the missing files.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-programYou can check out the link below to get the latest version of the software.
http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=enReference:
Install a programGet back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence. -
I am the administrator of the account. I can't remove the residue of some programs because of this message. As usual made all the bits to find the answer on the forum of Microsoft and other sites. None of them helped me so far. I also tried the modified permissions and changed a key .reg property. But nothing happened.
It is dangerous to change the permissions of system, programs and registry locations. These are tight to protect against malware that exploit the administrative accounts and compromise the entire system.
The "residue" would be solve by using the uninstall utility program.
That said, if you do not need to manually delete a folder, just be vary close. For example, appropriating and remove a specific program of record, not all of the "Program files". Basically, do not apply a new authorization to all the program files just to remove one file of boredom. If you keep in mind, you open any hole by making changes to the authorization.
-
I need to change the extension on a .dll file
I acidentally chose to open a dll using Microsoft Word, and of course the box has been checked to always use the selected program to open this type of file. If all the DLLs in my computer are slamming me with errors. I went to change the extension of the application and try to find something that was going to change this back, but nothing helps... I'm here to help. Thank you in advance.
try the system restore: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore teengeek.freehostingcloud.com Microsoft Community Contributor
-
Windows 7 tells me I need permission from remove me a file
I'm trying to remove the Program Files folder and the Windows folder from a hard disk which I have not started. I do this from a Windows 7 machine. The I'm trying to delete files come from the hdd to boot a Vista where I want to delete all the folders and copy backup it from a I have before inserting the disc newly restored in the Vista machine. Win7 denies my request to delete these files. I took possession of containers under folders and files. I changed the permissions so that I have total control. I even changed owner to anyone and has kept everyone full control. Even after doing all this Win7 still tells me:
You need permission to perform this action
You need permission to everyone to make changes to this file
Program Files
Creation date: 11/02/2006-11:18And gives me the option to retry or cancel
It is extremely frustrating and probably a huge bug in Windows. If I try again I get just repeated the same message.
I am an administrator still this OS will not let me run!
Does anyone have any suggestions? I need to keep intact boot sector - everything that I want to do is to copy a backup of my system files on this drive so that I can start my computer Vista again.
Thank you very much.
Hello
Here you mentioned the hard drive and if you think it's the hard drive, then my first suggestion would be to show the hidden files and folders.
Here's how to display the hidden files and folders.
a. open the Options folder by clicking on the button start the picture of the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options.
b. click on the view tab.
c. under Advanced settings, click Show files, folders and drives, and then click OK.
See: http://windows.microsoft.com/en-us/windows7/Show-hidden-files
Now, perform the following steps:
Step 1:
Delete files using Disk Cleanup
Step 2:
a. click windows orb
b. type cmd in the search box
c. right-click on cmd in the results menu and click on run as administrator
d. command windows opens, must be in the directory c:\windows\system32
e. go to c:\ do what type cd... until you reach c:\
f. navigate to the directory where the file to be deleted. example c:\windows.old\users
g. type rd/s (directory name)
h. will get quickly delete y/n type y and press enterAfter successful removal, you can check the windows Explorer and see that the file is missing.
Example, I have a directory on my c drive named windows.old, under windows.old that I have a user directory and then several subdirectories, 1 directory happens to be named bill. For some reason any windows can not find this place and will not delete the folder. I then who follow the previous steps and remove this directory.
See also:
Why can't I delete a file or a folder?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-delete-a-file-or-folderAziz Nadeem - Microsoft Support
-
Need drivers for Ubuntu for L300 (PSLB8E)
Hello
Where can I find the drivers for my Satellite L300 (PSLB8E)?
I have tryied to find http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp but its only for windowz.Sorry for my Eng :D
Your first task is to complain to Toshiba because they do not provide an independent means of the OS to Flash your BIOS.
Other manufacturers provide bootable ISOs so that you can copy it to a CD or USB key and do the work.If you have not already installed Windows, then you will need to get your hands dirty.
1. download archive ZIP with the BIOS of your laptop.
2. extract the contents of the file.
3. install the 'wine' from the software Center (package manager of your Linux distribution).
Wine to run Windows programs.
4. run the tool to update the BIOS with the wine. Right-click on the PS10220.exe file, and then select run with wine.
5. now, this is the critical step; you will get an error message, your program cannot continue. Do not close the error dialog box.
If you have already done, then go back and perform step 4 :-).
6. by running the. EXE with wine and staying in the error message, the binary file for the BIOS was extracted in the TEMP directory.
While the error dialog box always shows, we can go into the TEMP directory and keep a copy of the extracted BIOS file!
7. a copy of the BIOS files. They are located in* / Home/MYUSERNAME /. Wine/drive_c/Users/MYUSERNAME/Temp / *.
in a subfolder called something like * 7zS356.tmp*. Copy that subfolder on your desktop for more security.
You can now click OK in the error dialog box.
8. now enter the directory 7zS356.tmp (the one that you copied to your desktop) and find the file *.fd, which
is the BIOS file. 'S called it PS10220M.fd for the L300.
9. now we need is a utility to Flash the BIOS with the PS10220M.fd file.
There is one such utility called FlashROM, found at http://www.flashrom.org/
Visit the website and follow the instructions to create a Live USB key. The link it says "Live CD"
which is kinda the same thing. FlashRom is delivered with the ISO Bootable SystemRescueCD (http://www.sysresccd.org/)
If your task is to learn how to get SystemRescueCD to install on a USB key (we need a USB to then copy the firmware file).
10. There are many resources on how to create a System Rescue CD on a USB bootable; Try one, or if you have Ubuntu installed,.
Install the package "unetbootin" and use it to install the SystemRescueCD ISO on your USB.
11. now start with your key USB SystemRescueCD and use the FlashROM.exe utility to Flash your BIOS with the PS10220M.fd firmware file.
Read the Flashrom.org to aid in this process; There is option in FlashRom.exe to check if the BIOS hardware is supported, etc.Good luck!
-
How to remove the files / folders that require permission for administrators
under C:/windows/temp is several files that I want to remove but when I try, they report that I need permission for administrators
You must log in as an administrator instead of as a user on the Windows log in screen that appears when the operating system starts.
Or you can go to start > switch user and then log in as admin.
-
Need permission to remove a folder?
I'm trying to delete a folder on my c: drive called battle.net (Diablo 3). However, when I right click on it to try to delete it, it says I need permission for
do. I use Vista Edition home premium 64-bit. I noticed that the only records that give me the run as Administrator option and
perform deletions are marked with the symbol of microsoft. How can I get permission to delete the package folder?
Den
1. login to your admin account and don't delete.
2. right click to batl.net (Diablo 3) > click Take Ownership > a black and white screen will begin to Flash an ew times > then again delete.
If you do not have the option to take ownership in your right click context menu, use this tutorial to install it.
http://www.Vistax64.com/tutorials/112795-context-menu-take-ownership.html
First step is the easiest method.
Maybe you are looking for
-
Why the iTunes syncing literally never work properly?
Then, I use iTunes for years. I got an iPod for all about 7 or 8 years old (different models, generations, etc.) and iTunes has always been a problem, whenever I used it. I've been on different computers, I used different devices, everything. It's aw
-
Attentive display is a great feature, but there is an icon/widget, what would be really nice - in addition to a clock (or other), show the battery current level at a glance. Maybe a notification from the server of the battery whenever the level chang
-
How can I change the ink?
How can I change the ink for HP Officejet 4500? And why isn't this information available?
-
Hi, I wonder if there is someone who can help me on this issue because it prevents me to install Windows 7 on my laptop. I have a Sony Vaio VGN-NR110E model, and when I try to install Win7 it tells me that I must first uninstall DisplayLink Core Sof
-
Scheduling blackBerry smartphones
Is there really no way to plan a do or meet a person in your contacts list.