Need to click twice on buttons in Flash

Similar Questions

• Is it possible to have several break the view have need to click on the button 'continue' to continue?

  Is it possible to have several breaks notice require to click on the button 'continue' to continue?

  Yes I know it s crazy frustrating. It took me three days to figure out what I had to do.

  You could get my file but I Don t know where to download.

  You set movie (click the play next to the movie icon and choose reading). No automatic reading of the symbol or triggers tell the movie to play (if you intend to work they way I wanted, which is impossible to tell). There are probably other ways, but none of the 2000 I tried before worked.

  When you´ve set the movie to play, mark the spot on the timeline of the movie where you want to pause, and then click pause in playback of movies. Define a trigger on the chronology of the symbol with playback > stop all > 'your symbol name' in the symbol timeline just to the right of the pause. Then set to play again to the right of the shutter release. Make a button with action play chronology of 0

  It sounds very complicated, but it s not. Find how it was REALLY hard for me anyway

• How can I fix FF who need links clicked twice to load?

  With the help of worms 22.0, Win7 x 64. I have not had any problems until yesterday, where I had a power failure. On reboot, everything in FF loading slow as balls. SpeedTest ran OK, showing no difference in rates of UL/DL, but I have to click it twice to get it to load, sometimes more. Clicking it once a few results in a blank page, nothing appearing during up to one minute. It is yet to expire, no error message. If I click on new or F5, it instantly loads the page.

  I found several links describing the same problem through Google, but none of them were actually resolved before being closed. Safe mode is taken. Disable extensions is also nothing my.
  -In my opinion - something has been corrupted by the power failure sudden, but that's just speculation. There is nothing to be blocked by the firewall and loads of any property in Chrome/IE, but I really do not have to resort to those. Still, everything worked fine before the power loss.

  Idk. Reinstall completely? Is it possible to do the FF to run a control of file check? I threw all the temporary files using CCleaner, but it made no difference.

  No difference

  Edit: redness, brand-new, 19.0 installed without the profile seems to work very well, then he replaced with 22.0, imported bookmarks, and it's all good. Idk why it worked this time, when the steps I took were identical to what I did yesterday (and unfortunately), except using 19.0 complete as the base instead of 23 hub installation. Not working at full capacity once again, no more problems.

• Need to click twice more

  Why I have to click the mouse, more than 2-4 times to make it work I have two-way outside and nothing has changed

  Why I have to click the mouse, more than 2-4 times to make it work I have two-way outside and nothing has changed

  Perhaps of hardware issues...

  1 change the mouse. Former could be faulty.
  2. plug in another usb port. Could have a faulty port.

• Why do I need to click on it twice will display the buttons?

  Hello

  First of all I don't see the buttons (buttons - this is a clip) on stage. When I click on the button display using the following code, I can see my buttons. But first, I have to click twice for the buttons. While the second time there is no problem. How to solve the problem?

  This. Buttons.Visible = false;
  Import fl.controls.Button;

  var myButton:Button = new Button();
  myButton.label = 'Show in Menu';
  myButton.name = "btn1";
  myButton.toggle = true;
  myButton.move (55, 95);
  addChild (myButton);

  myButton.addEventListener (Event.CHANGE, changeHandler);

  function changeHandler (event: Event): void {}
  
  If (event.currentTarget.selected == false) {}
  Buttons.Visible = true;
  myButton.label = "Hide Menu";
  } else {}
  Buttons.Visible = false;
  myButton.label = 'Show in Menu';
  }
  }

  Thank you and best regards,

  use:

  function changeHandler (event: Event): void {}
     
  If {(event.currentTarget.selected)
  Buttons.Visible = true;
  myButton.label = "Hide Menu";
  } else {}
  Buttons.Visible = false;
  myButton.label = 'Show in Menu';
  }
  }

• Need to click the button twice

  The buttons are contained in a clip.  When you click the button, it starts the clip and makes the page "flip".  It is, if I click back to page 1 and return on page 2, it takes place in two clicks on the button to launch the clip.

  I put this action in the button where "page2" is the name of the instance of movieclip:

  on (release) {}
  _root.Page2.gotoAndPlay (1);
  }

  Thank you!

  first response kGlad was on target.  The stop(); at the end of image 1 the playing time for the first click... instead of gotoAndPlay (1), try to use gotoAndPlay (2);

• The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• My XP will not be stopped until I clicked on the button "Stop the computer" twice?

  I'm installing and uninstalling programs again.

  I click on the button "turn off". Nothing happens.

  Click again, and he obeys.
  I have most of the software companies insist on my computer needs to run their programs: NET, MySql, Visual Studio, Adobe, WinPcap, ffdshow and so on; and a dozen toolbars, etc. in the registry that I deleted the last months; like most of the guys. Your feedback is very much appreciated.

  Hi jediYL,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• I can't click on any buttons of menu in any version of Flash CC.

  I can't click on any buttons of menu in any version of Flash CC. I'm in 2 versions, work place which is fine and a home that doesn't work. For example I click on files and export and the buttons do not work. This seems to be a problem of Flash CC not Flash C6.

  I work remotely, and I have a fairly new PC running windows 7. Intel CPU with 3.5 GHZ, 16 GB of ram. on a TB of ram, NVIDIA Quad K2200 graphics card.

  Thank you.

  Under the resolution, I changed the text of 150% and 125% setting and now everything is fine. Thank you.

• Why do I need to select the next button twice to move forward in my quiz

  I have a number of true/false and multiple choice questions in this project.  The user still has 2 attempts to get the correct answer with your comments.  When they are done with the question they are asked to select the button "next".  Selecting the next button does not advance the slide of the first time well.  You must always select a second time.  I played with adjust active and inactive times on the timeline, but that doesn't seem to have anything to do with it.  Remove the 'next' button is not an option at this stage because it is mentioned in the audio commentary for each answer to each question. Any ideas?

  If you insert a slide of questionnaire based on the model of default slides, normal stacking order is that the next button is below the Clear key. Maybe you had already removed the Clear button? Try to use Arrange to change the stacking order.

  You do not click the next button twice, you must click the button submit once, then press on Y or click the slide. If the suspension point is far from the end of the slide, it will take a while, if actions are left to "continue". Change the point to pause to be near the end of the slide.

• By clicking twice on the pause/play button

  Hello

  I had a break and a button "play" to my slide show.

  The pause button is just a boks with the code for the click action:

  {sym.$('btn'). Click (Function ()})

  SYM. Stop();

  });

  The pause button is a boks with the code for the click action:

  {sym.$('btnPlay'). Click (Function ()})

  var timelinePos = sym.getPosition ();

  SYM. Play (timelinePos);

  });

  It works, but in the beginning, I have to click twice before the function.

  It's only the first time. After that, everything works fine.

  Does anyone know what could be the problem?

  Heya,

  I think there is an easier way for you to do. Try adding the following to the item you want to play/pause:

  var playing = sym.isPlaying ();

  If (playing = true) {}

  SYM. Stop();

  } ElseIf (playing = false) {}

  SYM. Play();

  }

  This will make the button stop (suspend) the calendar when he plays and play the timeline when it is stopped.

  See you soon,.
  Sarah

• Firefox does not account for single click and has double click for a feature need simple click as a bookmark link, enter in a text box, press a button

  Firefox 7.0.1 on Win7 pro 64

  Hello team FF & community.

  sometimes FF 6/7 shows a VERY strange behavior:
  While 'normal' things on Web sites (click on the links, edit text, scrolling, evolution of the tabs boxes) FF starts to ignore my simple clicks. The only way to work is with double-click instead of single-click (i.e. for links, enter a SBO, switch tabs, even to open a menu of Firefox) for all actions.

  Previously, the last example was about a minute

   https://plus.google.com/circles/find
  

  While moving to a "circle" contact - FF changes only are allowed double clicks. No errors, no message.

  I found this behavior buggy on many different sites - simple websites and with complex features, too - in the past few weeks since bf6 + 7 are current versions.

  With my other two questions, I get the idea that the current releases of FF contain more bugs in versions between FF1 to FF3.

  OK, I think that this issue (change of behavior: needs double click to get the reaction of simple click)-isRESOLVED: -

  I have disabled all addons and enabled/tested one by one... it was, apparently, the add-on "Multi links 3.0.0.16" was the problem.

  I replaced it with "Snap Links 2.1.1" (installed, but not yet tried a new), and less than a week daily work of 10-12 I never got this bug again.

  SOLVED!

• Need help to connect the buttons

  Can someone help me with this problem I have.

  I have a gfx I created 6 forms and them transformed from simple buttons. I have URL was sitting inside an xml file. How can I get the buttons to use the URL of the value in the xml file?

  Also how can I change the current external photo which is responsible for loading the url of a framework in the same xml file.

  I hope you arnt as confused as I am right now.

  I packed the flash file that includes the xml aswell.

  If someone could help me with this, I would be very grateful.

  Thank you all

  http://www.onlineaddicts.co.UK/menu.rar

  Remove all btns code, paste it below on the main timeline

  Also, no need to charge twice as much than the dome in the image container...

  Give an instance name to the outer container of the btns - menumv

  Use the following of the openURL method, use the same one for all the inclinometer...

  	import flash.events.Event;
  	import flash.events.MouseEvent;
  	import flash.net.URLLoader;
  	import flash.net.URLRequest;

  var myXML:XML;

  var myLoader:URLLoader = new URLLoader();

  myLoader.load (new URLRequest ("links.xml"));

  myLoader.addEventListener (Event.COMPLETE, processXML);

  function processXML(e:Event):void

  {

  	myXML = new XML (e.target.data);
  	trace (myXML);
  	menumv.carbtn.addEventListener (MouseEvent.CLICK, openURL);

  }

  function openURL(e:MouseEvent):void

  {

  navigateToURL (new URLRequest (myXML.car.url));

  }

  --

  http://www.darshanrane.com

• HP Deskjet 2514: Start button / stop flashes when I try to scan HP Deskjet 2514

  I had a problem where my printer would not prevent printing, even though I cancelled it.  I watched and followed these instructions.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  I didn't know that one to remove, so I deleted everything in the folder.  Now, my printer prints, but whenever I try to scan something, my power button flashes and it won't scan.   Help, please!

  Hi @Donna924,

  I read your post and see you were able to solve the problem for print jobs would not cancel, but now you are unable to scan. I'd love to help you.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically. This software will also troubleshoot jobs stuck in the queue, which you could use in the future if the problem persists.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• ActionScript 2 and 3 - multiple clicks of a button

  I am trying to create a single button that can take a single click, double and triple.

  For example. I click on the button once, and it goes to a scene. Once I click on the same button twice (like a double click) and it goes to another scene. Finally, I click this button 3 times (click, click, click on) and it goes to another scene.

  Any help would be welcome.

  you will need to use a timer for the triple tick in both as2 and as3, and you will need to use a timer for a double-click, too for as2.