Need to create useful reports from the results of TestStand (.mdb) database
Any help is greatly appreciated!
We need create reports from the results of TestStand (.mdb) database. I was not able to find much online.
Details:
In 2014 TestStand, we have configured to use Access database management system. Otherwise, the database settings are default.
These reports will be targeted to managers and engineers. They need to show objects as:
Which EHR past/almost?
For each DEGREE, what past/a failed test?
Thanks for all the suggestions!
Because I couldn't find anything pre-made, I created reports from scratch using queries in Microsoft Access 2010.
Tags: NI Software
Similar Questions
-
While closing a link to expedia.ca a message come to say: the page you requested was created using data from the form. This page is no longer available. If you resend the data, any action that has been specified by the form will be repeated. You want to resubmit the data? When I click Yes or no, nothing happens except that the message just reappears. I can't get rid of it so I can't do anything else on my phone, except to answer a call if someone calls me. How can I get rid of this message from my phone? I tried to turn it works... even by leaving off the coast for 5 minutes before turning turn it back on. I can't even check my OS because I do not what anyone on my phone. I hope someone can help me with this.
Have you tried a battery pull? This should fix a problem as you described.
With your phone, remove the battery, then replace a minute later. This will do all sorts of wonderful things to your phone for free unclaimed memory, delete no cited source points and make your phone run smoothly.
Try it and let us know if it does the trick.
-
Unable to display the results of a detailed report or the results of a questionnaire in a bed within the project. I checked the preferences of quiz and enabled for the draft declaration. I use SCORM 1.2. My LMS is not listed (MCN) and so I chose 'other LMS standard. Any ideas on why I see the results?
Publish your SCORM SCORM Cloud and test if it will show you the results you want. If so, then your problem is with your LMS. If this is not your problem may be due to something in the settings of your current project. Eliminate one thing at a time.
-
What is the best Adobe application to create mobile applications from the "ground up"?
What is the best Adobe application to create mobile applications from the "ground up"?
This might be useful:
WEB - how to choose the best tools for your project
- Adobe Dreamweaver is mainly for professional website developers who live and breathe the programming or for designers and project managers who have learned enough HTML at ease. Even if there are a lot of models and tools of environmental Designer, the major attraction of Dreamweaver is how it offers full access to the code, with immediate feedback (through a split screen) what look like the results. The same content can be published for a desktop browser or mobile devices like the iPhone, iPad or Android smartphones.
- Adobe Muse is a new tool mainly for graphic designers who want to create and publish Web sites without writing code. With a cooked graphic design interface, Adobe Muse generates the HTML to publish directly to the web. Muse sites can be hosted on the hosting platform integrated Adobe Business catalyst or transferred to a third party hosting provider. Adobe Muse includes widgets, which are built features such as slideshows and albums, that you can drag and drop on the pages of the site. However, Muse currently does not support the development of sites that target mobile devices, like the iPad, iPhone and Android smartphones.
- Adobe Edge, currently public preview on Adobe Labs, is used to create web animations. The files it produces are usually added to a Web site using a tool such as Dreamweaver. The beauty of the edge, is that animations are based on the latest standards open such as HTML5 and CSS3. With no plug-ins needed, animations work on the latest PC and Mac browsers as well as mobile devices, where the Flash technology is not universally supported.
-
Create a report on the Oracle AWR report
Hello
I want to create a report on the release of dbms_workload_repository.awr_report_html.
In my region to report, I Specifies the source of the region such as:
declare
q varchar2 (4000);
Start
q: = "select output";
q: q = |' table (dbms_workload_repository.awr_report_html';)
q : = q || ("(: P_DBID, 1,: P_BEGIN_SNAP_ID,: P_END_SNAP_ID))';
Return to q;
end;
After that the points obtained their values, it will be called (for example):
SELECT
output
Of
TABLE
(dbms_workload_repository.awr_report_html
(2264999593,1,1525,1526)
);
The result is a report in HTML format. When I run the report at the APEX, the report looks OK but it is not fully displayed as it should (if the spool the output to a file, or run it using @$ORACLE_HOME//rdbms/admin/awrrpt.sql in SQL * Plus, the report looks right). The a generated/displayed in the APEX:
1. all 'Back to Top' links do not work. It does not move you to the "Main Report" section (on the upper part of the report).
2. the report has lost a few colours. Column names are not in blue, several lines in tables are not white and yellow in the corners (for ease of reading).
How can I configure the report or column (only one column in the report) in the APEX to show output in its original format of html, do not use the APEX report/column templates?
Thank you.Oops!
You will also need a button in region 1 of page 1. This button will submit the direction to the same page and page
Other control...
The call to dbms_workload_repository. AWR_REPORT_HTML must specify the instance id. I've hardcoded a value of 1
DBMS_WORKLOAD_REPOSITORY. AWR_REPORT_HTML (: p1DB, 1,: p1_start,: p1_end)
CITY
Published by: city has 13 November 2008 07:45
-
I need to create a PDF from InDesign file that people can change in Reader or Acrobat
I need to create a PDF from InDesign file that people can change (for example, change a name of 'John' to 'Johnny') of Adobe Reader or Adobe Acrobat. I already looked at forms, but they do not keep your police, faces and sizes colors and just do everything is selected as a form of black text, 12pt, Times New Roman.
Can anyone here help me?
Vincent,
If you use Acrobat pro, build your .pdf file, and then save it as (french version):
... so that everyone using Acrobat Reader (or Pro, of course) can change the file .pdf (with restrictions), add comments...
If you want to try to 'protect' your .pdf file, you can try with this (in the menu 'Preferences' (french version)):
-
error reported from the transport layer and the error description was impossible to extract
Hi, can someone please explain how to get rid of the pop-up message when the computer starts up:
error reported from the transport layer and the error description could not be found! the message has been lost
Windows XP Virgin internet net gear wireless. I searched on the internet - nothing except suggestions, this is the internet
connections but is not working okay I tried microsoft fix
Thank you johnHi, I just started to use the hard drive that had the problem, it's still there. The problem is with the raid card. (no problem on other drives) In system config, starting there are two enteries: SATARAIDS and silcfg. I checked the SATARAIDS, rebooted
missing message. I deleted all the files SATARAIDS and silcfg. my computer, properties, hardware - deleted. deleted the folder in program files. did a scan to remove any files or file fragments on the raid drivers. I did not know I had lefe the cd in the drive for the raid drivers I have in yesterday. I rebooted.after reboot, there not says found new hardware "raid card" perhaps because the disc was in the drive and it automatticly installed drivers. FIXEDNO MORE ANNOYING MESSAGE -
Could not open a file, the message came, I need to create an association in the control panel be greatfull advises you on how to do this thanks Brian Jones.
Hello
What is the file extension?
You must have this program installed to open this specific extension
If it's a file .doc, you must have Word installed
If a .xls Excel file must be installed
etc.
read this:
How do I... Change file extension associations in Windows Vista?
-
I need a PDF by email from the file and need to password protect the file. How to password protect the file?
Hi olivera96817159,
Password protect the PDF file, you must use Acrobat Pro DC, it is not possible with Reader app.
Thank you
Abhishek
-
I need to create a grid of the 1980s scrolling effect
Hello I need to create a grid of the 1980s scrolling effect. I have already downloaded the grid from Photoshop and I need to create a movement for her legacy. Please see the link.
'Feature Presentation' motion graphics test - YouTube
Thank you
Mike
As already mentioned, you completely lose your time even bothering to import something PS for this simplistic effect. Everything can be done in AE.
Generate effects-->--> grid
Effects--> style--> Motion tile
Effects--> style--> Glow
Mylenium
-
Create a path from the pen with an action
I can't record an action that create a path from the pen. You have an idea to solve?
Thank you
Marco
With active use of the path enter the path of the menu actions panel flyout.
-
Remove duplicates from the result set
Here's a challenge question that I was playing with a my free time during the work.
I assume you have the basic HR example somewhere around (I hope is not in production).
Let's say you want to get employees from the employees table whose name is similar to another employee last name.
The easiest way is to join the two tables with a join condition that checks for the name and employee id. Here's what I came with.
*************
Select e1.last_name, e1.first_name b, e2.last_name c, e2.first_name d
employees employees join e1 e2
on (e1.last_name = e2.employee_id <>e2.last_name and e1.employee_id)
order by one;
************
The above query returns 10 rows. The first and the second are essentially the same. It is similarly, 3 & 4, 5 & 6, 7 and 8 and 9 and 10. The question is: is there a way that allows me to get rid of using only sql duplicate rows from the result set of this query. I sat on it for 15 minutes and I couldn't know. I'll try to watch my completed work once again.Example:
SQL> column a format a10 SQL> column b format a10 SQL> column c format a10 SQL> column d format a10 SQL> SQL> SQL> select e1.last_name a , e1.first_name b, e2.last_name c, e2.first_name d 2 from employees e1 join employees e2 3 on ( e1.last_name = e2.last_name and e1.employee_id != e2.employee_id) 4 where e1.employee_id < e2.employee_id 5 order by a; A B C D ---------- ---------- ---------- ---------- Cambrault Gerald Cambrault Nanette Grant Kimberely Grant Douglas King Steven King Janette Smith Lindsey Smith William Taylor Jonathon Taylor Winston SQL>
-
Upgrades - during the procedure, my PC says it is install updates - but after having done this, she does not restart and I need to go to restart from the last successful to get windows to restart - ideas?
Windows Update Forum:
It's updated operating system Vista, upgraded installation and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Can I use pictures from the reserve for commercial use for my members to do with. We would not sell the photos but the use for commercial use. (the 29.99 price months?)
Thank you.
Barbara
In your case you will very likely get extended licenses for images from Fotolia.com otherwise you would have to buy a new license for each Member who has access to use the weather picture they actually use it or not...
-
How to create a DataControl from the Java file
How to create a data from the Java file controlHello
Try like that after the example, you will get the answer1. Create Page.java
public class {Page}
private String pageName;
private String pageAction;
public Page() {}
Super();
}public Page (pageName, pageAction String String) {}
Super();
this.pageName = name of the page;
this.pageAction = pageAction;
}{} public void setPageName (String pageName)
this.pageName = name of the page;
}public String getPageName() {}
Returns the name of the page;
}{} public void setPageAction (String pageAction)
this.pageAction = pageAction;
}public String getPageAction() {}
pageAction return;
}
}2. create PageList.java
import java.util.ArrayList;
import java.util.List;public class PageList {}
private pages
= new () ArrayList list; public PageList() {}
Super();
pages. Add (New Page ("Page title 1", "page 1"));
pages. Add (New Page ("Page title 1", "page 1"));
pages. Add (New Page ("Page title 1", "page 1"));
pages. Add (New Page ("Page title 1", "page 1"));
pages. Add (New Page ("Page title 1", "page 1"));
}public void setPages (list of pages
) {}
This.pages = pages;
}public
{list getPages()
return pages;
}
}3. right click in the PageList.java and choose CreateDataControl
then refresh the DataControl and focus on which a DataControl as PAgeList will be created
Kind regards
Felix
Maybe you are looking for
-
lines while moving the window on 5 k IMac
Hi all I got a new iMac 27-inch 5 k, alls installed, but on some windows I get weerd lines all while moving. On my (old) iMac 27-inch with the same OS (Caroline 10.11.6) I do not have that. Not all windows look like that while on the move, some do, b
-
The attached VI works when I run it initially to create the XML file, but when I change the data and run once the XML file is created, it is not updated with new data. What I am doing wrong? Thank you.
-
Hello I want to create an error handler custom in a model similar to the ErrorHandlerExample.seq file. In my case, I'll genereated errors in several different DLLs. We try to avoid writing wrappers around dll functions to fill in the TestStand error
-
Automatic detection area don't pop up when plugging my digital camera to the PC card.
Original title: Lost Auto Detect. Hello.. I've updated to IE 8. Now when I plug my card of digital camera to the computer, I have more auto detection pop box upward. I tried to fix it, but so far I can't find the problem. Thank you. Janice
-
I have not found this question in the forum, and I really hope that someone can help you. Basic wireless - EA6500 router. Four Xbox 360, all connected by its own WUMC710. Media servers (Serviio, UPNP/DLNA) on Windows 7 and Windows Server Essentials 2