Need to file error iso 64 or later

Similar Questions

• CC of InDesign cannot open the file - error: recorded in a later version (CS7.0)

  My colleague and I have implemented CC accounts last month (updated for CS5), but now when I'm trying to open a file, she led recently I get this error: "cannot open 'file name.indd' because he was saved with a newer version of Adobe InDesign (CS7.0). You must use this version or later to open the file. To then allow him to open up in this version, click Save as InDesign CS4 or later version, or exporting to IDML. »

  Both are PCs. We use the same software, it seems so I'm confused as to the version of CS 7, she saves in and does not allow me to open the file.

  Any suggestions?

  Your cowoker has installed InDesign CC and you always run CS6. You

  can install CC creative.adobe.com

• [ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1

  I run the lesson 2 TemperatureSensor project

  I can detect the BMP180

  PI@raspberrypi ~/javame81ea/bin $ sudo i2cdetect y 1

  0 1 2 3 4 5 6 7 8 9 a b c d e f

  00:          -- -- -- -- -- -- -- -- -- -- -- -- --

  10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- --

  40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  70: -- -- -- -- -- -- -- 77

  I can retrieve the info from I2CDeviceConfig

  
  

  Name of the controller: null

  Controller number: 1

  Address: 0 x 77

  Size: 7

  Clock frequency: 3400000

  My API permissions are

  jdk.dio.DeviceMgmtPermission "*: *" 'open '.

  JDK. DIO.i2cbus.I2CPermission "*: *".

  But when I try

  myDevice = DeviceManager.open (config);

  I get

  [ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1

  Any suggestions?

  Ah.

  You run usertest.sh as root?

  sudo./usertest.sh

  Needs me root access to the devices.

  Tom

• I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.

  Original title: iso to wim

  I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.

  Thank you

  Because you are dealing with Windows Server 2008, I suggest that you go on the TechNet forums and re after your question here. They are better equipped to help you with questions regarding the problems of Windows Server.

  Thank you!

• Trying to create a bootable USB I get message error "ISO image selected is NOT a valid ISO file.

  Questions of ISO image

  I'll try to find a way to install Win 7 64 bit Pro - on multiple (without a DVD player) netbooks and thought I had found the solution using DigitalRiver to upload a picture ISO of the OS - then (using the MS Windows 7 DVD/USB tool) - create a BOOTABLE usb key?

  However, yesterday I downloaded the image ISO (http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65805/X15-65805.iso)

  (which, according to the website of souce was supposed to be 3 GB in size - but was 2 GB in size (WHY?)

  And on the use of the tool USB - a got a message error "ISO image selected is NOT a valid ISO file"

  -What this means and what I can do to work around this problem?

  And, I think - that this procedure works with a "corporate license"?

  Tried - same result - the file is obviously corrupt
  I ended up using a previous download that works!

• The reference must be closed on a reading-file error or not?

  Dear users,

  When I read a file, a reference is created one should close, when no longer used, should I? Here is a minimal example to my next serious question: should I close the benchmark on reading-file error or not? Is there a created in the case of "the file does not exist"?

   

  See you soon,.

  No, when used in this way, the references created by the file read and write functions should not be closed - thought that he would have no negative effect if you did.

  In addition, you do not want or need the structure case around a reference close the function.

  Mike...

• Need to file "dpgmkb.dll" for Wireless Desktop 2000

  Original title: dpgmkb.dll

  I need this file for my 'Wireless Desktop 2000'. Any help would be appreciated.

  Hi Jim,.

  I'll be happy to help if you could provide more information about your application.

  (1) what is the brand and model of the computer?

  (2) what version of the Windows operating system you have installed on your computer?

  (3) what is the complete error message you receive?

  (4) when, exactly, you get this error message?

  Try Performing a System File Checker analysis and check if it helps.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

  If the problem persists, please provide the necessary information to help you.

• What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt

  What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt.

  I always get this message in a long horizontal area on my desk top once I restart and turn on my computer.

  Thank you

  "Privoxy" is a 3rd party is no program not part of Windows XP.  You can go to
  Panel-> Add/Remove programs
  and remove this program.  If you still think that you need this program, try reinstalling it on Sourceforge
     <>http://sourceforge.NET/projects/ijbswa >

  HTH,
  JW

• My Cookie file was corrupted in data and my programs continually pop up with the 'corrupt file' error when a program opens, pointing to \Users\name\Appdata\Roaming\Microsoft\Windows\Cookies.

  My Cookie file was corrupted in data and my programs continually pop up with the 'corrupt file' error when a program opens, pointing to \Users\name\Appdata\Roaming\Microsoft\Windows\Cookies.

  The problem is, Chkdsk will not fix this, and I can't access the file. This opens up a world of problems when I need to fix this error, so I can upgrade to Windows 7. Help, please!

  I just ran the scan again. He said of the errors found, but could not be repaired.

  This problem actually has nothing to do with internet explorer. It's the cookies folder that is corrupt in the Windows folder in roaming. The error file is in conjunction with the programs, that I try to run (AIM, Skype, so forth). Trying to enter the folder it says it's corrupt. I don't know what is the root of the problems or how to solve this problem, but these measures have not helped so far. Regarding the repair, I will try that next.

  http://Tinypic.com/view.php?pic=14mw4ly&s=4

  Here is a picture. This is the error of the lower right

  It's what the tool SFC to see system files corrupted and try to repair the system files.
  SFC could not fix it.

  Looks like you will need to do this:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Read the info on the link above.

  Good luck with it.

  Let us know how you go with it.

  See you soon.

  Mick Murphy - Microsoft partner

• Install WIndows 7 on XP extension files error

  Hi I have a Dell Inspiron 6400 and im trying to install Win 7 on a corrupt XP. XP gives me this message when I boot it \system32\hal.dll. If I want to install Windows 7 on it, but when I do, it gives me an error message on the extension of the files that says. Windows cannot install required files error code 0 x 80070001. Ugh so im just struggling with this computer and I really don't want to reinstall xp. Thank you for your help.

  Hello

  There are no Windows 7 drivers or support available for your DELL Dell Inspiron 6400.

  Select OS at this link of Dell:

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-6400x

  Reinstall XP.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here are the steps that you would have needed to follow before you try to install Windows 7 on any machine.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  See you soon.

• How to go from stater from windows 7 to windows 7 Home Edition premium if I can't get the download of file system iso-13346 udf

  I bought a notebook with windows 7 starter on this subject, I would like to upgrade to windows edition Home premium that I bought, but when I try to install the software I get a message that I need to run file system iso-13346 udf. I tried to find a download for this without success, where can I find a download for this software without information confussing. Thanks for your help Bryan.

  If the Windows 7 Home Premium license you have access to is either an Express upgrade, full retail of upgrade or version, you can use the product key and upgrade Express from Windows 7 Starter to Windows 7 Home Premium. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option to enter a key, enter the key of Windows 7 Home Premium, when asked, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Home Premium files the stored settings and programs.

• msdvcp110.dll missing file error

  msdvcp110.dll missing file error

  I'm done with the installation of c ++ redistribution and everything but does not work for ultimate express

  Original title: installation of visual studio 2012 on windows 8

  Hi Mike,.

  Thanks for posting your query in Microsoft Community.

  The error you get can be caused by components from Visual C++ Runtime libraries that are missing or get conflicted, perhaps due to a third party software or badly configured registry settings.

  So, I would suggest trying the following steps and check if the problem persists:

  Method 1:

  I suggest to install the Visual C++ Redistributable package in the system to boot and try to run the applications:

  Step 1: Clean boot of the system.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Step 2: Download the Microsoft Visual C++ 2013 and install.

  Click on the link below and install it on your computer.

  Package redistributable Visual C++ to Visual Studio 2013

  If she fails to install and then try to install the Package redistributable Visual C++ 2010 in compatibility mode. Follow the steps in the link given below to install Visual C++ 2010 redistributable Packages in compatibility mode. Please see the following article:

  Make the programs more compatible with this version of Windows

  If the problem persists, try the following method.

  Method 2:

  Try to run a scan of the file system (CFS) auditor to check corruption of system files in the system. SFC scan will search for system files corrupted on the computer and fix them.

  1. Press the Windows key + X, click prompt (Admin).
  2. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• DirectX on Windows 8 (64-bit) "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ""Setup could not download the file. Please try again later or check the connection to the network. »

  So I tried to get this to work at least for a day now, but whenever I try to launch my new game I'm away I kept getting this error: "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ' When I was re-directed I downloaded, it opens and clicks on agreed and all this things, but after 10 seconds initialization, it gave me this error: "Setup could not download the file. Please try again later or check the connection to the network. " I checked all that nothing seemed to be wrong, I did it again and again and again. So I just went to a solution or any news for DirectX. So far, no luck.

  I am running on DirectX 11 right now, is if there is a new DirectX or am I a jerk, and that is a different problem? I can't understand it.

  Thank you

  Hello

  Try this link... it's a complete Installer for DirectX Runtime June 2010... This is an optional package that use a lot of games...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

  The file is self-extracting, so take note where extract you it to.

  Open the folder, and then double-click DXSETUP...

• unexpected end of file error for Photoshop CC 2015

  Hey guys so I got this unexpected end of file error for Photoshop CC 2015. Now, I've discovered the file that had problems was libcef.dll, by using the event viewer and by reading the details. Now the crazy part is that I NEED this software for my studies and technical support for my school on the left for the day 19 minutes ago. When I first call I ran out of 6 minutes. I don't know if there is someone available or on right now to help me, but I need this problem immediately! My progress school and professional future depends on it!

  I do not use windows 7 in all. I use windows 10 that I ended up uninstalling preferences and then reinstall the program, and I found myself actually fixing it.

• Error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)

  Hello

  I currently have a problem with my VDR backups. as indicated in the title, the error I get is "error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)".

  Background

  We are currently running VMware Vsphere version 4.0.0 on VDR version 1.1.0.707. We have a task of backup running in Vsphere that takes a snapshot of every night of the VM. It is then wrapped on tape for the archive.

  Question

  All of the virtual machine is backup successfully except one. I get the error message is as above: "error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)".

  The backup task completed successfully, and the virtual machine can be restored from a backup. However, the virtual machine always has a snapshot and in addition, the virtual disk to the virtual machine is still attached to the host.

  The current will of this issue that we use is:

  (1) stop the VDR Server

  (2) remove the attached hard disk

  (3) to take a snapshot of the virtual machine

  (4) delete all snapshots.

  I would like to find a solution to the underlying cause, as the current will is tedious and time consuming.

  Another note, the logic unit number that the virtual machine is currently has a block size of 2 MB while all other virtual machines have a block size of 1 MB...

  If you need any additional info, feel free to ask.

  See you soon,.

  http://www.VMware.com/support/VDR/doc/vdr_120_releasenotes.html#upgrade