HP Probook s 4530: penetrates only not in BIOS

My laptop HP 4530 s is not enter the bios. After that I enabled the legacy startup option in the menu. whenever I pressed the F10 key it displays system Diagnostic screen, and I have an all tests, but still nothing.

I had withdrawn any partition of the hard drive and I was faced with the question where the installation of windows 8 is not installed on my hard drive.

After reading on the internet, I turned on the Legacy startup mode and now I'm stuck... Any help?

There is not a major problm causing due to the UEFI system and / GPT disk partition

Here you must follow the following steps

(1) trees all turn off your laptop.

(2) press power button and then immediately press the esc key and look at bottom left of the screen you will see interrupt the system startup or similer.

(3) then you will see the list of commands on the upper left corner as recovery system, boot, bios menu etc. depend on your model, then choose the bios option now that you've opened your bios

If you do not see the order list or system will boot OS then repeat these steps

If your issue is not resolved after following these steps please answer. I'll give you another solution

Tags: Notebooks

Similar Questions

  • Configuration penetrates only not in While loop

    Greetings,

    I'm having and issue with my serial port VISA has not managed its information to my transmission loop but he'll give it to my receive loop.  I've written a VI that is supposed to communicate with 5 radio stations (4 series and 1 TCP) so when this program is running that I communicate on 5 different channels.  I know that these transmit and receive loops work because I use the same ones communicate with each individual radio.  The first thing I want these modules to do is indicate if they have made the connection with each radio.  When I run the VI in the execution of highlight mode, I can see that my VISA configuartion never propgrates inside my transmit any loop.  However, they transmit in my loop of reception.  Does anyone know why I can't initialize my loop of send?

    I see a green wire from your loop to receive your transmission loop.  And it looks like it's for the stop condition.  You just addicted to data!  That is why the transmission loop cannot run until the end of the loop to receive.

    Simply use another local variable.

  • HP Probook 4530 s A7K05UT not stickers

    Hello

    I bought this Probook s 4530 in August of TigerDirect. I recently decided to do my upgrade at low prices to Windows 8 and noticed that I have no Windows 7 product key sticker or the thumbnail S/N on the bottom of my laptop. Is - this common as these laptops? The product key sticker is on something else?

    Thank you, Joe

    Hello

    Because of the bad design/material, stickers out very quickly that's why many providers now put the sticker inside the battery area. Please, remove the battery and check from there.

    I hope this helps.

  • Good question Probook s 4530: partial Solution, need the rest

    Hi all

    Just took delivery of a Probook s 4530 about 5 days ago and it is quite the spectator and performer. Love everything about it, but the display quality may have better brightness and contrast. My only gripe, really.

    But it's not what it is! Here's the deal:

    Unpacking of the laptop for the first time and do initial set, before she even started in Windows for the first time, he had a pretty bad glitch audio / video. A "hiccup" would be an understatement. More like a cough, sometimes a hacking. An audible ' buzz' and accompanying video stuttering if I look at the video and just an audible buzz if listening to music. This seems to happen randomly and at various intervals. But it would take place in less than a minute when you listen or look at a media and continue throughout.

    I found a thread here where a guy had the same problem for one different model, other Chorus, solutions banttered on and finally he came to it and it works:

    Disable the wireless device.

    At first, I tried to simply unplug the connection to the Local network, but no go. Disable all of the device and the problem goes away. Tested over and over again. When I connected to the internet it messes up in 20 seconds. But unplug / turn off the wireless card and watch a whole movie without hitch and wells, problem found. And I hope that this thread others help find a partial solution, also.

    But as said, this is only a partial solution. The internet has streaming video, music streaming, movies, TV, games, all these goodies audio / video, I like! But I can't enjoy if connected to the internet, because the computer coughs and if not connected the computer didn't cough... but I'm not connected! Ugh!

    So I wonder what's my next move? What are some compatible drivers / updated drivers for my card which can solve the problem of total and won't mess up my computer? I think that perhaps something different for audio and wireless? But which? Oh of course, Windows says they are the "latest drivers', but who cares what Windows?  I would like to take care of this in one fell swoop if possible without too much guessing and trial and error. Right now I have:

    Adapter wireless Atheros AR9285 802.11 b/g/n

    and

    Atheros AR3011 Bluetooth 3.0 + HS adapter

    and

    High definition audio

    I don't know the exact drivers because I'm away from the laptop atm.  But I think they can be changed or uninstalled / reinstalled. I want to just do it without problem. And I only BT could be important, as BT does not work without the card wireless enabled. So I mentioned. Which is another subject of concern. To disable the device (wireless) for watching videos or listening to music does mean no internet OR bluetooth, apparently.

    I'm the guy at home, to Midway. Help!

    Hello:

    I would first install the latest chipset driver and restart.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&taskId=135&swItem=ob-96363-1&mode=3

    It's the latest audio driver for your laptop:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-95793-1

    Latest driver for the wireless adapter:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-97750-1

    Latest version of the bluetooth and driver software:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&taskId=135&swItem=ob-95054-1&mode=3

    Paul

  • ProBook 4530 s: win 10 results ProBook s 4530 in no Wi - Fi

    Good afternoon, all!

    I tried to upgrade a ProBook s 4530 on Windows 10.  Everything looks good, until I try to connect to Wi - Fi.  The widget simply says 'Impossible to connect wireless' and there is no showing why Event Viewer entry.

    The wired adapter works fine.  They both have the Realtek card.  I tried the driver Windows 8.1 without success.  The hard switch is activated and the LED is white.  The BIOS is the latest & greatest.  Also triple-checked the router password without the THST wire - OK, too!

    Without indication of the BONE as to what is happening, I may restore Win 7 and either start again or give up.  I have an other s I tried to level; the without wire was fine, but there was something in the services that refresh the office and break the RDP and VPN connections.  So I'm a little worried that these laptops are not always stretch to win 10.

    Tips to win 10 to run on this?

    Thanks for all the research!

    Gregg

    Hello:

    If your laptop is RTL8188CE wireless card, it does not work on W10.

    I didn't even know that there was a W8.1 driver for him.  I thought that this card made up to a maximum of W8.

    Why upgrade to the Intel card wlan card does not appear in the maintenance manual... Chapter 3, page 25.

    That should work well on W10.  Not only that, but then you get a dual band with bluetooth card.

    Intel Centrino® Advanced-N 6230 HP Part # 636672-001

    The only caution is you must get this card, and it must have the HP part # on it or it will not work because of the white list of BIOS HP has on these models.

    You should be able to find opportunity but in State tested and functional at a great price on eBay by questioning by the part number.

    I'll make sure that you see the HP part number indicated for the item in the picture list.

  • How to the Probook s 4530 of Win 7 Home Premum Win 7 Ultimate / professional?

    Hi support them.

    I have HP Probook s 4530 with Geniune Windows 7 Home Pemium, I need to connect to the domain and its not allowing me to do. When I searched on the internet they said that you need to update Windows 7 Professional or ultimate edition.

    Please guide what should I do? and how I may connect to the domain?

    Thank you

    -Saadat

    Hello

    You can use any time upgrade. Please use the following link:

    http://Windows.Microsoft.com/en-AU/Windows7/help/videos/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

    Kind regards.

  • Control (Ctrl) and function (Fn) keys are exchanged on the ProBook s 4530. How can I restore it?

    I have the HP ProBook s 4530, who worked as expected i.e. keys Ctrl and Fn keys work properly. Now somehow these two keys are reversed and I want to restore as well as Ctrl Key functions as Ctrl key. Please note that I am running Windows 7 on this computer. How can I restore it?

    Finally I could solve the problem by following the steps mentioned below:

    1. Switch off the machine
    2. Removed the a/c power and battery and waited a few seconds
    3. Attached battery and put on the machine...

    and the problem was solved!

  • ProBook 4530 s: driver for Probook s 4530 after updating windows 10

    Hi all

    I've updated my Probook s 4530 on Windows 10 days back & now three drivers are missing. I tried to auto update in windows update, but it could not find. I know that it is too early to ask for help on the driver for Windows 10 but eager to get a work around.

    Here are details:-

    Pilot 1: Device Base system:-PCI Slot 2 (bus 36 PCI, device 0, function 3)

    Information:-device PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30\4 & 2ce17296 & 0 & 03E2 also requires installation.

    Pilot 2: Device Base system:-PCI Slot 2 (bus 36 PCI, device 0, function 3)

    Information:-device PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30\4 & 2ce17296 & 0 & 00E2 also requires installation.

    Driver 3:-unknown device:-location on the Pci Bus

    Information:-ACPI\HPQ0004\3 & 33FD14CA & 0

    Thanks in advance.

    Concerning

    Dev

    Hi, Dev:

    Here is the workaround...

    For the first two, use this driver...

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881 & swItemId = ob_116003_1 & swEnvOid = 4132 #tab1

    For the last one, use this driver...

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881 & swItemId = ob_125640_1 & swEnvOid = 4059 #tab1

  • How can I get a Windows 7 Pro to a ProBook s 4530 recovery Kit

    I have a ProBook s 4530 with Windows 7 Pro. I would like to restore it to factory settings.

    There is no recovery partition or no BIOS F11 to restore option.

    Also, there is has installed any software Recovery Manager.

    Can I get a recovery for my ProBook directly from HP Kit?

    I have not been able to find one for my model on HP.com.

    According to the documentation, I found that I should be able to order a kit of recovery on the following Web site.

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5060881 & swLangOid = 8 & swEnvOid = 4059

    Thanks in advance for your help.

    Hello:

    If you live in the USA/Canada, call HP at the number below and ask a set of recovery disks.

    Have the serial number of the PC handy to give to the customer service rep.

    1-800-334-5144

  • ProBook 4530 s: display the ProBook s 4530 upgrade required

    Hello!

    I want the upgrade form to my HP ProBook s 4530 of basic HD-ready advance Full HD Panel. Unfortunately I do not see this option here. Is it possible to somehow?

    If Yes, could someone appropriate advice part number.

    Thanks in advance!

    Here is the Service Manual:

    Manual

    HP did not offer a 1920 x 1080, but offered an option of 1600 x 900 on your model.

    See p. 20:

    39.6 cm (15.6-inch) HD + glare, with webcam 647008-001

  • Hello.. I have laptop (hp probook 4520 s), keyboardis does not.

    Hello.. I have laptop (hp probook 4520 s), keyboardis does not. only the letters 'B' and 'n' How do I reactivate? because when I use a keyboard external usb it works? Help, please

    Helder salvation,

    Did you of recent changes made to your computer?

    We will reinstall the internal keyboard drivers and check.

    a. click Start, type Control Panel in the search box, press enter, click System, click Device Manager, click on keyboard.
    b. you should find the internal keyboard part as well as any external keyboard used.
    c. right-click on the keyboard integrated in the list, click on uninstall.
    d. unplug the external keyboard.
    e. restart the computer and check if the keyboard internal works.

    Since the external USB keyboard works, if drivers did not fix the internal keyboard problem, I suggest you to contact the manufacturer to check if there is a hardware problem.

    Hope the above information helps.

  • HP Probook 4520 s screen does not do anything...

    Hi everyone...

    I have a display problem with my Probook 4520 s. The screen does not show anything, not the bios boot, no windows.

    It starts really normally no other problems at all. I plugged the other external VGA monitor and works very well. But the Symbols is completely disabled does not display anything. Normally, I manage my laptop with great care.

    I chat with HP support team, they suggested


    Please perform a dry boot on the laptop by following the steps below:
    1. disconnect all external devices and adapter unit
    2. remove the battery and press and hold power for 45 seconds. This should completely discharge any residual charge in the Group
    3. restart the computer by using only the AC adapter.

    But no luck.

    Please provide a suggestion/solution.

    Thank you.

    Fassi wrote:

    Hi everyone...

    I have a display problem with my Probook 4520 s. The screen does not show anything, not the bios boot, no windows.

    It starts really normally no other problems at all. I plugged the other external VGA monitor and works very well. But the Symbols is completely disabled does not display anything. Normally, I manage my laptop with great care.

    I chat with HP support team, they suggested


    Please perform a dry boot on the laptop by following the steps below:
    1. disconnect all external devices and adapter unit
    2. remove the battery and press and hold power for 45 seconds. This should completely discharge any residual charge in the Group
    3. restart the computer by using only the AC adapter.

    But no luck.

    Please provide a suggestion/solution.

    Thank you.

    In a dark room, boot up your laptop and shine a flashlight on the LCD screen.

    If you see a very dark Windows desktop, then you have the chance.

    The backlight inverter has failed and must be replaced. If you are a kind of DIY user, then this is a repair at low cost. If this is not the case, have done so in a store could cost @ $75.00.

    If you still don't see anything then the LCD failed. It is a more expensive repair.

    If your laptop is still within its warranty period, it's time to Contact HP warranty repair service.

    Best regards
    ERICO

  • I am trying to replace my iphone 6 s model n °: A1688, FCC ID: BCG-E2946A, IC: 579C-E2946A. but I can get the serial number because its doesn't turn only not on how can I replace it?

    I am trying to replace my iphone 6 s model n °: A1688, FCC ID: BCG-E2946A, IC: 579C-E2946A. but I can get the serial number because its doesn't turn only not on how can I replace it?

    Take it to your local Apple store. They will find it for you.

  • I do not see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not working, the video is blank (black) all, someone can help

    I don't update or download anything, so today, I can't see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not work, the video is all blank (black).
    When I restart my PC again the video can work just first video, then when I see another video site it's all black... (but its still working)
    can someone help me?

    Hi splingun,

    We have a section of fixing Facebook and YouTube. The black screen seems expressly included in the list of the articles I linked to you.

    Hope this helps!

  • Z6200: z6200 penetrates is not in service menu?

    I am having trouble with my z6200 penetrates is not in the service menu. I press the top arrow + cancel + power for 5 seconds. It turns on then back directly to the exit? I'm trying to fix a 24:10 error and it really is strarting to annoy me.

    Someone please help

    Hello

    You must use the OK key instead of the Cancel.

    Best regards

    Mike G

Maybe you are looking for

  • Browsing history won't save

    I went to Tools ~ Options ~ Privacy and F'Fox asked to save my history, but it will not. Any thoughts?

  • What should I do to install Diver Audio?

    Some how I get this message saying: Missing Audio Diver, disable Audio access key, please install Diver Audio! How can I fix it?

  • Start Menu problem

    the "Start" icon on my laptop automatically changed the type of classic view. I looked in the settings to start menu int "taskbar and start menu appearance properties ' and the selection was in the normal display - not the classic view. I tried to ch

  • Remove the screen on the menu Manager, click

    Currently I have a screen, the user can bring up the menu and select an option that displays a series of buttons in a fieldmanager.  It works very much like on click menu create and add buttons to the Manager then the screen.  I want to do now is if

  • Problem with Oracle Forms 11 g 2 on linux

    Dear allHere's the problem:-J' installed Oracle Forms 11 GR 2 (11.1.2.2.0) on Linux from Oracle using the JDK 1.7.0_79 6.6-J' solved all the problems and issues of the Arab reports.-Now regarding the oracle forms now when I compile the FMAS on WINDOW