Need to reference the style user interface components

Similar Questions

• bean, containing the business logic and user interface components

  Hello experts design ADF, please guide me.   I came across a critical design aspects.  I have the homepage with a lot of UI, region 1, region 2 components. I bind the components of the user interface of the page at a session scope managed bean and is the reason why, when control passes to the region 1 or region 2, I'm going to do a lot of processing logic and then on that basis, I have to update the page user interface components.   Same thing with region 2 also.  And then I should be able to access the information in all regions and also through other components of interface user etc.

  I see only the scope session bean can help me here to get my tasks in all regions and in all the other components of the interface user to the page because I'm not able to spend too many parameters in all regions.     Now the problem is, I can't serialize this bean because as I've mentioned a lot of user interface components are updated based on logic.

  If I do not serialize the bean, I might have a problem in the future when the application must be deployed to the cluster envt.

  I don't know how can I go with my design now.   Please give me ideas, brilliant and very grateful for your advice.

  Thank you

  Hello

  I did not follow the entire thread, but this last message, I can tell that you are not using ADF how it should be used. So let me address two issues

  1. I use data controls generated on methods of bean managed my areas (workflow).

  If you create a POJO data control that you configured as controlled beans then this will be two instances (separated) from the same Java class. This means that they do not share anything. The only option to share state between a managed bean and a data control is if you would have the data dynamically control bean up the bean managed using the language of Expression of the 8which then however creates a dependency between the DC and the bean - however, there are use cases like that)

  2 activation / deactivation of the buttons in the parent view of a region

  This can be done using bean-injection, which is a bean managed in extended view defined on the parent view that you pass as parameter for the workflow. See: http://www.oracle.com/technetwork/issue-archive/2013/13-may/o33adf-1920483.html

  As said, I haven't read the entire thread, but want to point out that there is enough information in writing (product documentation) and video (Insider ADF - who teach the development of SFM practices http://www.oracle.com/technetwork/developer-tools/adf/learnmore/adfinsider-093342.html take the time to review this)

  Frank

• Interact with the user interface components

  I'm trying to find a GOOD way to interact with the external classes user interface components. For example, that you have a 'controller' class that needs to access the view of the user interface in some way (define a label text or something else). The controller class does not do anything, it discusses only the logic of what should be the case. Currently, it is created by my top-level class when the program starts. He listens to some events occur and needs to update/interact with the user interface or the State of the application depending on what events are. I do not seem to be a way for this controller class to easily access the UI component that I need to get my hands on.
  
  I'm trying to do to reduce the size of a file of mxml WindowedApplication growing (LOOK cool but that is not important) and take part of the logic of the application of this file.
  
  It's complicated by the fact that the label is in a State that does not have the status of 'base' (so it is not a child, or even a subsidiary child of the main class at boot time) and by the fact that it is not yet near a high school component. (If that were the case, I could probably just pass the label object in the constructor for the outdoor classroom.)
  
  In other words, I can't just call getChild ("labelName") on my 'main' request object because it is buried nested inside OTHER components. I don't think I like the idea to browse all components and sous-composants recursively looking for the component that my outer class trying to ask. I thought about other ideas, but I don't like any of them enough to try them, eh.
  
  I'm at the point now about where I come to the conclusion that my fundamental design strategy is wrong, or Flex just not allowing complex applications where the GUI components can interact with external classes relatively pain-free. I'm not convinced that "Flex cannot do', I'm looking for advice on some great Flex application in all design patterns.
  
  Where do you put this kind of control logic, and what happens when it starts to overflow and become so large that you need to break in other files?

  Found a solution, I think that's what I've been looking for:

  http://labs.Adobe.com/wiki/index.php/Cairngorm

• Using ActiveX controls to the old user interface

  I tried to build a User Interface for TestStand 4.1.1 using LabView 8.6.1 (on Windows XP)

  However, ActiveX controls keep showing in the old non - 3d "block" style.

  

  This seems to be a problem when you build a new exe. If you use the included UI (Full Featured) in TestStand it appears correctly.

  

  I was able to replacte this problem on two other development systems (a new windows XP, LabVIEW 8.6.1 & TestStand 4.1.1 install).

  (1) take a copy of the full-functional UI of LabVIEW.

  (2) open the project file

  (3) rebuild the exe file

  It's only a problem when you use the exe file. When you run from the LabVIEW development system it looks good.

  Hi Simon,.

  For your UI to take on XP
  Theme controls, you will need to place a manifest file that specifies the activex control topics in the same
  directory as your executable file. TestStand comes with a manifest file for
  INTERFACE c# you can also use for the UI of LabVIEW. Just go to the \User Interfaces\Simple\CSharp and copy the file TestExec.exe.manifest in the directory of the LabVIEW User Interface executables.

  Note that the manifest file must have the same name as your executable file LabVIEW UI. For example, if you name your user interface, "MyCustomTSUI.exe", you will need to name the manifest file 'MyCustomTSUI.exe.manifest '.

  Please let me know if this solves your problem or if you have other questions. Thank you!

• [ADF, JDev12.1.3] How to add user interface components in a page before you display it or hide it?

  Hallo,

  I started to raise this issue with the rohanwalia type () in this thread Re: Re: [ADF, JDev 12.1.3] how to hide menu items based on the logged-on user but maybe it's better to make the question in a separate thread.

  I have a page home.jspx with some user interface components (menus bars, text entry, buttons,...).

  Unbounded workflow

  loginPage.jspx - loginSuccess-> home.jspx

  Based on the logged in user, I programmatically to hide (for example some buttons and menu items) or to add UI components on the page home.jspx.

  Thus, in the managed bean (request scope, right?), associated with the page I want to write a method that before appear the home.jspx makes the task above.

  {initPage()}

  Here, I call an AM method for each component that says that if

  -According to the user - it should be visible or not.

  This information is stored in a Boolean vars, one for each component.
  

  IT1.setVisible (it1visible);

  IT2.setVisible (it2visible);

  B1.setVisible (b1visible);
  

  ...
  

  }

  How can I do to make this method runs automatically when the page is rendered?

  Thank you

  Federico

  Hi Federico

  you use links to visible false, but before pageload links are not accessible at the bean so when you call after the page load button works but before pageLoad, it won't

  so rather than use binding use variables of bean to the value true or false and provide references to the visible property of inputField

  Suppose that to create a Boolean variable and getter setter now is the button click set a value false

  Thank you

• Easy way to use the native user interface in the AIR for mobile?

  Hi, I use Flash CC for the mobile game, but when I want to create a regular application I need to create my own user interface and which takes a lot of time, I found several components on the internet but they require coding, is it parts components that you can simply drag and drop into the CC Flash?

  Thanks in advance

  Maybe it's what you need

  IgG.me/at/airui

• Disappears on the screen during the research on the modern user interface

  Original title: questions on screen keyboard

  I have a problem of access to keyboard on screen when using specific features of Windows 8. The problem only occurs with my desktop PC, I also have a Surface Pro 3 without any problems. The problem is that whenever I search for something, either in the charms on the right shortcut window drag the keyboard screen on just disappears and cannot be reopened until I have cancel the search. Same thing in fashion Metro/modern, while searching for an app. However the problem does not seem to influence the research done in desktop mode in the my PC popup.

  The Office I mainly use as a media center device for watching videos in different rooms when the office is physically. I can still use a physical keyboard to use searches, but sometimes my keyboard is not right next to me, while my mouse is always next to my hand. I found it faster to just short-circuit the keyboard input with the keyboard screen on when I browse the web. I know that the function should work because I do it all the time with my surface. Even with my keyboard attached to the surface, if I folded it with the kickstand on the back of the keyboard or just manually, click on the button of keyboard on screen with the keyboard typing normal position I can always get the screen keyboard works without any problem. I checked also with just my regular Asus laptop and who has the same problem as the office. This isn't really a problem with the laptop even if, as it is a standard design where the keyboard is not move or come off. Anyone has any ideas, it could be the cause? Thanks in advance to anyone who responds

  Hi Will,

  Welcome to the Microsoft community.

  • Using the screen keyboard or touch screen?

  There are two types of virtual keyboards on Windows 8, on-screen keyboard and touchpad. You may experience this problem if you are using a touchscreen keyboard on the task bar. We have checked this on our computer of Windows 8 and its default value of design.

  If you use the screen keyboard and the keyboard should not disappear if you use it in the modern user interface. Please confirm what virtual keyboard you use to help you also.

  You can read this article and check if it helps:

  How to use the touch keyboard

  http://Windows.Microsoft.com/en-us/Windows-8/using-touch-keyboard

   

  Use the keyboard to the screen (OSK) to type

  http://Windows.Microsoft.com/en-us/Windows-8/type-with-the-on-screen-keyboard

   

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• Is it possible to several user interface screens to manage in the only user interface project in oracle BPM...

  Hi Experts,

  In my process I use multitask user regarding my needs. Now, I need to create screens of the user interface to the user of the task. Is it possible to several user interface screens to manage in the only user interface project in oracle BPM... Please let me know if you have an idea

  .

  Thanks and greetings

  Charm_Narra

  http://youtu.be/bpVVpDJLE1o   This video explains how to ensure that the UIS of multiple human tasks in a single project ADF.

  Dan

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• Use the Flex user interface in a PS plugin

  Hello!

  I am a user relatively to the Flex user interface design! A couple of days, I thought to give my PS plugins a look of the Flex user interface! I searched the internet on some tutorials or guides, but there is very little information relating to this. The guide Builder Extension CS says that we can interact with the Flex user interface & a native application by using the branchezBranchez C++ library. There is an example of code in Illustrator SDK for the same under the name FreeGrid (C++) & FreeGridUI(Flex UI). But I couldn't find an equivalent in PS.

  On further research in this regard, I found that we can use the PlugPlug.h (& .cpp) with a few changes in our C++ PS of the plugin code. I'm stuck at this stage now. How can I do to get out of here?

  Guide me people.. !!

  Thank you!

  This would be the part "all the settings you will need to do to get them working in the context of Photoshop" of my post! :-)

• After update of firefox mobile, I found that the modified user interface, is there a way to push back on mobile?

  I decided to update my firefox for android fotvthe flash support, but when I did I found the interface changed, now I want to go back, but unlike in I can't find older program versions for the desktop version.
  also, I should mention the problem of text entry that showd this version where the cursor is at the beginning of the first line to the place where im typing.

  Hello

  It is not an option for the old user interface on the new version, but you can get older versions here:
  https://FTP.Mozilla.org/pub/mozilla.org/Mobile/releases/
  But, we don't recommend that you use the old version because they are insecure, so take that into account if you decide to restore.

  For the text of entry question, can you tell me the brand and model of your device and if you use a special keyboard on any?

  Thank you!
  Michelle

• I have the new apple TV, and he had the new user interface.  Friday he returned to the old version of apple TV user interface.  Anyone know why this could have happened

  This is a silly question, but I'm not too tech savvy.  I don't know I have changed something somewhere.  I have the new Apple TV, and he had the new user interface, which means that the appearance of the applications using the applications, example, scroll down to Netflix, Netflix, etc. to research.  This weekend he returned to the UI I've seen on my old Apple TV. Does anyone know why this could have happened and how I me the new interface to return?  I did a reset to the original values Apple TV and it did not work.  The tvOS is 9.1 (13U85).

  Try to understand the issue.

  Do you mean that you have an apple tv4, but he has a home screen display from the older ATV 2/3?  You can attach a screenshot?

  I have never heard of it and don't know how it is possible that they run entirely new software on the ATV4...

• How to run the Manager user interface programmatically

  I am looking for a method to run programmatically (from Labview), the Manager user interface, and then to connect it.

  Is there an API from .net to who?

  Thank you

  Note: I developed for earlier versions of VeriStand, a high-level application that manages projects of test benches and their versions. I want to update with the new manager of the user VeriStand interface.

  It is not a .NET API to control UI Manager, but there are some command line utilities, you can use to launch the user interface Manager, open a specific project, specify the IP address of the gateway to use and connect automatically.

  Try the following command line arguments:

  /nivsprj 'c:\project.nivsprj' Gateway localhost / connect

  They are documented in the online profile of Stimulus help editor.

• "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

  "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

  Hi chygirl,

  You can follow the solution at the bottom of the link:-
  http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/

• The logon User Interface DLL Masgina.dll failed to load?

  Hello

  My name is Shelley, I really honestly do nothing about computers and my computer at home, which is a dell with windows xp pro.   was working fine, then 1 morning I rose and ithad a blue screen with the message about it.

  The logon User Interface DLL msgina.dll failed to load.  Contact your system administrator to replace the DLL or restore the original DLL.         then she had a reset button to push.  When I pressed the button, the display cover Dell and then he showed the sreen of coverage of Microsoft Windows XP, then he can go right the message telling me that. The User Interface DLL failed.

  Now, my computer has been sitting there for 2 weeks, and no one can use it.  Now, I'm on my cell phone the school for 17 years.

  What should I take my computer in a store or is - something simple, maybe, I can do myself?

  OH and if you know, the computer is at my daughters school, they have gave to her, because she had really great classes and she's in schools IB program, so they gave him a computer to have at home, it is set up for academic use, I know not whether that counts or not.  She got a new laptop for Christmas. Other people in the House are now using the computer to play games and watch videos from YouTube.

  Can someone help me?   Thank you, Shelley

  Hello

  ·        You're able to boot in safe mode?

  ·        Remember to make changes to the system?

  Method 1:

  If you are able to boot into safe mode then I suggest to do a system restore to a previous point when the system worked very well and check.

  Step 1:

  I suggest to start in safe mode and check if the problem persists.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Step 2:

  I suggest you do a system restore and check. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  I suggest you to consult the article below.

  "Logon user DLL Msgina.dll failed to load Interface" error after you have installed the MS04-003 security update

  http://support.Microsoft.com/kb/836683

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.