Need to remove the advanced values in VMX file
Former Director elected to harden all VMs VMX files in order to avoid interruptions in service unwanted individuals manual installation of the VMware tools upgrades.
I agree with him and understand in previous versions, it was a good idea to disable these but now with 5.1 with the fact that we have more to restart for the modernization of the tools happen my life has become much more complicated and we constantly have problems with VM with mounted tools and no way forced to disassemble the tools.
I am looking for PowerCLI script to remove these advanced values in the VMX file for all the virtual machines attached to a vCenter. I guess these are the following values:
isolation.tools.autoInstall.disable = true
isolation.tools.guestInitiatedUpgrade.disable = false
insulation. Tools.connectable.Disable =true
If there are other values that I should check, please let me know and I will review the VMX file.
This is another option, but lines will remain in the VMX, albeit with different values
You can do it with this script
$vm = Get-VM -Name MyVM $spec = New-Object VMware.Vim.VirtualMachineConfigSpec$spec.tools = New-Object VMware.Vim.ToolsConfigInfo $extra1 = New-Object VMware.Vim.OptionValue$extra1.Key = "isolation.tools.autoInstall.disable"$extra1.Value = "false"$spec.ExtraConfig += $extra1$extra2 = New-Object VMware.Vim.OptionValue$extra2.Key = "isolation.tools.guestInitiatedUpgrade.disable"$extra2.Value = "true"$spec.ExtraConfig += $extra2$extra3 = New-Object VMware.Vim.OptionValue$extra3.Key = "isolation.tools.connectable.disable"$extra3.Value = "flase"$spec.ExtraConfig += $extra3 $vm.ExtensionData.ReconfigVM($spec)
Tags: VMware
Similar Questions
-
A
Thanks to you all. My designer solved the problem. The image was white in the file that made it impossible to make it transparent.
-
Need to remove the spaces between each words
Hi guys,.
I need to remove the spaces between each word. I'm doing this because I want to compare a column with a value.
For ex: named - description "Negotiate APR - current balance" should be replaced by "NegotiateAPR-currentbalance.
All can help me out here to achieve. Your timely help is well appreciated.
Thanks in advance.
WITH t AS (SELECT '"Negotiate APR - current balance"' str FROM DUAL) SELECT REPLACE (str, ' ') str FROM t;
gives: "NegotiateAPR-currentbalance.
Is that what you want...? If this isn't the case, please give some examples.
See you soon,.
Manik.
-
New VAC .the see my old address 'Reply', forward, & "write". -Usually very inconvenient. -You should be able to remove the old according to that ISP no longer exists.
Do you need to delete the emails too?
If you delete your account
- Go to Edition-> properties, then select the account. Then click Action account at the left bottom of the active window and delete your account.
If you remove the only shipping address, then delete the SMTP Protocol
- Go to Edition-> properties and select the Server (SMTP) "outgoing" > choose one you need to remove.
By default, you can't remove them, if you want to remove the default value, and then create new SMTP and make default and remove the old SMTP
-
Remove the default value drop-down list
I am currently working with Acrobat Pro XI version. I want to know if it is possible to remove the default value in a drop-down list.
When the list less than 4 elements, it is possible to deselect the default value by pressing the spaces below. However, when there are no more elements, it is more possible.
I read that you need to include white space as a component in the list of elements, however, then you will see an empty list item when people work with the pdf that is not preferable.
So, nobody how to remove the default value in a drop-down list?
Thank you!
OK, I found a perfect solution to my problem by using FormsCentral for Acrobat. Here's what you need to do:
Step 1:
-Open FormsCentral
-Create new form (choose the blank form)
-Click the drop-down menu to create a new drop-down list
-Fill out the items in the list by clicking on the timeline (you can also add a label if you want)
-Click on: file > save as PDF form...
Step 2:
-Open the PDF saved (you will now see a blank pdf with a menu drop-down)
-Click on: Tools > forms > Edit Form (when a pop-up window indicates that you should save a copy of the document in order to make changes, press 'Save a copy' and open the file with Acrobat pdf copy)
-Select the drop-down list, the drop-down list to copy and paste it into the desired document
Now you have a drop down without a default choice. Remember that you can not change the items in the drop-down list, because we will choose a default choice and you must use the copy pdf file once again. As long as you do not click on a list item, it is not choose a default choice.
It is not a perfect solution, but it works for me.
Good luck and thanks!
-
PowerCLI Remove-NetworkAdapter questions - need to remove the single card
I need to remove a single adapter via PowerCLI:
"Get-NetworkAdapter - VM myvm" returns:
Name Type NetworkName MacAddress WakeOnLan
Activated
---- ---- ----------- ---------- ---------
Network adapter 1 e1000 VM Network 00:50:56:09:09:09 False
Network adapter 2 e1000 VM Network 00:50:56:01:08:07 FalseI want to only remove the NIC 2, so I tried:
"Remove-NetworkAdapter - networkadapter"Network adapter 2"which returns:
Remove-NetworkAdapter: cannot bind parameter "NetworkAdapter". Could not be converted
the value of 'Network adapter 2' to type 'System.String' to type 'VMware.VimAutoma '.
tion.ViCore.Types.V1.VirtualDevice.NetworkAdapter ".
On line: 1 char: 38
+ delete-NIC - NIC < < < < '2 network adapter.
+ CategoryInfo: InvalidArgument: (:)) [delete-NetworkAdapter], Pa)
rameterBindingException
+ FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomat
ion.ViCore.Cmdlets.Commands.RemoveNetworkAdapterSo I tried:
$network = get-networkadapter VM - myvm
Remove-NIC - NIC $network
Who wants to delete the two network adapters:
Confirm
Are you sure you want to perform this action?
Operation 'Remove network adapter' target 'NIC 1,
NIC 2 ".So I tried
$network = get-networkadapter VM - myvm
Remove-NetworkAdapter NetworkAdapter - $network.networkadapter [2]
Which returns:
Cannot perform indexing in a null table.
At line: 1 char: 63
+ delete-networkadapter networkadapter - $network.networkadapter [< < < < 2]
+ CategoryInfo: InvalidOperation: (2:Int32)], RuntimeException
+ FullyQualifiedErrorId: NullArraySo, what don't get me? I need to remove the 2 network adapter only.
Any help would be greatly appreciated.
-stephen
You can do
Get-NetworkAdapter VM - myvm | where {$_.} Name - eq 'Network adapter 2'} | Remove-NIC
Note that a table of PS starts indexing at 0.
If your last attempt should be
$network = get-networkadapter VM - myvm
Remove-NetworkAdapter NetworkAdapter - $network.networkadapter [1]
-
I need to print the last value
Hello
in the Sub statement I need to print the last value
means last 5555, I can print other values, but last value 5555 is I can't print
Please help me
Thanks in advanceSELECT REGEXP_SUBSTR('5454 4587454 547451 188745 5555','[^'||' '||']+'||' ',1,5) p1 from dual;
DavidKarthick_Arp wrote:
Like thiswith t as ( select '5454 4587454 547451 188745 5555' str from dual ) select regexp_substr(str, ' [[:digit:]]*$') from t
Why leave space in front of her?
SQL> ed Wrote file afiedt.buf 1 with t as (select '5454 4587454 547451 188745 5555' str from dual) 2 -- 3 select regexp_substr(str, '[0-9]+$') 4* from t SQL> / REGE ---- 5555 SQL>
-
Original title: remove unnecessary files
I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.
Ditto for PCFIX.exe.
How can I remove these and clean unnecessary files? Thank you.
Hello
1. how exactly you are trying to remove it?
2 have you connected the administrator account?Step 1: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.
Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\
Reference: How is ownership of a file or a folder in Windows XP
-
I recently got a new laptop and I need to transfer my files to my computer windows vista to windows 7, but I need to remove the transfer windows easy off vista to install the new Windows 7... How can I do this. its driving me crazy
You cannot remove the Windows program like that... Windows 7 easy transfer to restore.
-
I need to remove the program files o to send to:
original title:?
I need to remove the program files o to send to:
I need to remove the program files o to send to:
You want to remove entries from the right-click send to menu?
If so, click on the round of Windows (start), type shell: sendto and hit enter. To remove a shortcut, right-click and choose Remove.
-
account users: I need to remove the old user accounts
I need to remove the old user accounts
http://www.Vistax64.com/tutorials/93026-user-account-delete.html
Read the tutorial above.
http://www.tech-recipes.com/Rx/2054/vista_how_to_delete_user_account/
And meanings, too.
The information above should solve the problem for you.
See you soon.
Mick Murphy - Microsoft partner
-
you need to remove the license from computer to move to another PC.
you need to remove the license from computer to move to another PC.
It is all the information that I have and you can get on the product. I don't know when and who has been sold, or whose key is. Asked me to pass the software of an older laptop to a new laptop.
Good luck with that. Without a legitimate serial number, you're stuck.
Download the Pro or Standard of X, XI or Acrobat DC versions
Nancy O.
-
Remove the NULL values and update the value according to the logic
Hello
The problem data
CREATE TABLE VOLA (SRNO, NUMBER, zero NUMBER, A NUMBER); INSERTION of REM in VOLA
TOGETHER TO DEFINE
Insert in VOLA (SRNO, ONE) values (1,237.94);
Insert in VOLA (SRNO, ONE) values (2, null);
Insert in VOLA (SRNO, ONE) values (3,203.565);
Insert in VOLA (SRNO, ONE) values (4,170.69);
Insert in VOLA (SRNO, ONE) values (5,113.67);
Insert in VOLA (SRNO, ONE) values (6,93.6);
Insert in VOLA (SRNO, ONE) values (7,82.03);
Insert in VOLA (SRNO, ONE) values (8,66.675);
Insert in VOLA (SRNO, ONE) values (9,63.59);
Insert in VOLA (SRNO, ONE) values (10,61.415);
Insert in VOLA (SRNO, ONE) values (11,60.015);
Insert in VOLA (SRNO, ONE) values (12,58.235);
Insert in VOLA (SRNO, ONE) values (13,57.805);
Insert in VOLA (SRNO, ONE) values (14,56.965);
Insert in VOLA (SRNO, ONE) values (15, null);
Insert in VOLA (SRNO, ONE) values (16, null);
I have to remove the NULL values in column 1, the problem is that the position of the NULL values are not fixed, and it can be any position. If all the lines of the columns are null, then throw it away.
If multiple NULL values are here so I have to do the math as follows to update null with the eigenvalues
1. If the first line is null then take the 2nd value in row and update it.
2. If the lines between both is null then take avg of prev and next value not null and refresh it.
3. If the last value in the column is null, then then take prev and update, in this case last two are null, so I have to take value of prev 14 value line update in
15th and 16th ranks.
I want to put this pl/sql logic, somehow, that I thought have loop and counter aapproach and loops through the elements and check and update.
But always looking for something better before looking to write code. No idea or help will be useful for me.
I * think * you are looking for something like:
WITH VOLA (SRNO, ONE)
AS (select 1,237.94 from all the double union)
Select 2, union null value double all the
Select 3,203.565 from all the double union
Select 4,170.69 from all the double union
Select 5,113.67 from all the double union
Select 6,93.6 from all the double union
Select 7,82.03 from all the double union
Select 8,66.675 from all the double union
Select 9,63.59 from all the double union
Select 10,61.415 from all the double union
Select 11,60.015 from all the double union
Select 12,58.235 from all the double union
Select 13,57.805 from all the double union
Select 14,56.965 from all the double union
Choose 15, null of union double all the
SELECT 16, NULL FROM dual)
GET_VALUES (SELECT SRNO, ONE ACE,
, LAST_VALUE (WE IGNORE NULLS) (ORDER BY SRNO CSA ROWS BETWEEN UNBOUNDED PRECEDING AND 1 PRECEDING) AS PREVIOUS_VALUE
, first_VALUE (ONE IGNORE NULLS) over (ORDER OF SRNO CSA ROWS BETWEEN 1 SUITE AND FOLLOWS without TERMINALS) AS NEXT_VALUE
FROM VOLA)
SELECT SRNO, ONE, CASE
WHEN IT IS NOT NULL, THEN WE
OTHER CASES
WHEN PREVIOUS_VALUE IS NOT NULL AND IS NOT NULL THEN (PREVIOUS_VALUE + NEXT_VALUE) NEXT_VALUE / 2
WHEN THE PREVIOUS_VALUE IS NOT NULL, THEN PREVIOUS_VALUE
WHEN THE NEXT_VALUE IS NOT NULL, THEN NEXT_VALUE
END
END AS NEW_VALUE
OF GET_VALUES
/
HTH
-
How to find duplicates of a field value? For example - in a field, I have values like {123,345,346,123}, now I want to remove the duplicate value in the field so that my output looks like {123,345,346}
If it's an array you want to deduplicate then here is a script [for use in the Script Processor] I prepared earlier:
var result = new Array();
var added = new Object();
If (input1 [0]! = null)
{
for (var i = 0; i)< input1[0].length;="">
{
var point = input1 [0] [i];
If (! added [item])
{
added [item] = 1;
result [result. Length] = item;
}
}
}
Output 1 = result;
Kind regards
Nick
-
I have a text field. I need to remove the first 8 characters of the field, leaving the remaining characters. Help?
Example:
I need to remove these numbers PXXXXXX. Leaving the other characters.
Thank you
Bob
A normal 'substring' is what you're looking for.
For a formula of the column in the response criteria tab:
SUBSTRING ("YourPresTable". "YourPresColumn" OF 9)
To make the RPD and the workload of shipping off the coast to the database rather than forcing the work on the server of the OBI or presentation:
Substring ("01 - Sample App Data (ORCL)" ".." ") "" "BISAMPLE '." " D10 product (dynamic table)". ("' Prod_Dsc ' 9)
Maybe you are looking for
-
I cannot download roboform filler
I up grade my foxfire to the new version and now I did not have roboform on it
-
Text in the drop-down list used in the report
Hello I want to use in my report, the text of the index selected in the combobox. Unfortunately, the variable for a ComboBox is L1, not as text T1. So, when I want to insert text in the report, I cannot write @L1 @ because it appears in the index, no
-
A string of sharing by a queue of execution to run on different computers
Hello I try to share a string of one execution to another execution. The problem is that executions are on different machines on the network Stuff running on the same machine works. On another machine I got the error-17500 dcomcnfg.exe is configured
-
Configuration of the console Xbox 360 for attach to Windows Media Center
I'm following the steps to connect my Windows 7 Media Center to my Xbox 360 Elite. When I try to download http://www.xbox.com/pcsetupsoftware, I get a page "in search of something to Xbox.com". Any ideas what should be the correct url? Imran
-
Hi my friends -I went me to the Download Center to get the win live essentials 2011 but the update of the victory still give me the wrong number, please help me, thank you very much