Need to remove the ConfigFree to install Vista

Similar Questions

• Satellite Pro P100: I need to remove some software before installing Vista

  My Satellite Pro P100 needs the following software uninstalled before installing Vista: -.
  Norton Internet Security
  Bluetooth Stack for Windows by Toshiba
  ConfigFree

  Toshiba has plans to release a version of Vista the last two?

  Hello

  I put t know that Toshiba exactly, but all the tools and utilities will be available for download after the official launch of Vista.

  A friend of mine told me that it may happen that all software will not be created separately for the facility, but as a set of software. I put t know where he found this info, but let's see how it will work.

  By the way: pile of BT for Vista is available on the Toshiba BT page. Check it out under the http://aps.toshiba-tro.de/bluetooth/

  Good bye

• Accidentally, I installed the upgrade to Windows 7 without the first installation of Vista on a new hard drive. How can I remove the upgrade and install Vista?

  I replaced the failed hard drive and then inadvertently loaded upgraded Windows 7 before I reinstalled Vista.  Now I can't understand how to remove the upgrade to Windows 7, so I can install Vista.

  Boot from the Windows Vista DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Click on drive Options
  Select the disc/s click on Delete
  Click new
  Click on apply
  Click OK
  Click Format, and then click next to proceed with the installation

  or you can try this for Windows 7:

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

• Portege M400: Could not update the BIOS after installing Vista

  Hello

  I have improved my M400 for Vista.

  I am trying to install all drivers Vista of Tosh. According to the instructions, the first thing to do is to update the bios.

  So, I download the bios (v3.60) on the site and run the .exe, but he tells me that I need the common modules.

  The only common modules that I can find on the Tosh site are for XP.

  Can anyone help?

  Thank you

  Steve

  You will probably need to update the BIOS before installing Vista on the laptop.
  Then, you could install Vista again.

• I need to remove the old version of windows easy transfer to install a new... How can I do this

  I recently got a new laptop and I need to transfer my files to my computer windows vista to windows 7, but I need to remove the transfer windows easy off vista to install the new Windows 7... How can I do this. its driving me crazy

  You cannot remove the Windows program like that... Windows 7 easy transfer to restore.

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help aligning the SSD to install Windows XP Pro (32 bit)

  OK, I scoured the internet for help on this one - I'm a newbie to SSD - so having to manually align the partitions and find FITTINGS utilities to take care of the "Crusher" is all new to me - so the answers I found on the net were to "over my head" for my last neuron remaining cope!

  The machine is an Asus Eee PC 901/XP - that belongs to a friend of mine. These netbooks have 1 x 4 GB SSD and 1 x 8 GB SSD - I installed XP Pro SP3 on the 8 GB and got to boot from it - only problem is not only slow, but essentially unusable in this same open my computer with no other progs running takes a good 30-45 seconds - and actually run the progs just cripple it.

  After checking the CPU in Tsk Mgr was sod all, that there is plenty of available RAM (I upgraded to 2 GB = max mobo aura), I can only imagine that - now that I've done some reading on these SSDS - the (main?) cause of the non-existent performance is the fact that I have (in my ignorance) doesn't have to align the partitions before installing the operating system.

  I got a 8 GB disk image - using a prog called 'Snapshot' - as I read it, I should be able to then use this image to replace the disk of 8 once I have the aligned partition (this image is now on the 4 GB drive), without messing up alignment - so no doubt I need to align the 4 GB drive as well.

  So, after all that waffle that I would be really happy is a walk of models by using Diskpar (if someone can point me to a working bind it to d/l 1!) -or Diskpart, which I think I can run from my recovery disc of Win7 (from my Dell laptop) - I know that I've seen people talk about running it from a Vista recovery disk, so guess it of the same tool and can help me to do the same job.

  I think I need to remove the volume (?) on the 8 GB, before I can do any alignment - then, as it is currently the only player with a job o/s on this subject, is it possible by booting from the recovery disc too?

  Just for the record the Tech Support Asus was desperate - also, their support for the "Eee" family forum have been down for weeks - then were not able to ask people who have probably all done on this machine!

  Thank you

  Jon

  Hello

  Unfortunately, this is not supported in computer ASUS; You should continue to contact ASUS for support.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• How to remove the watermark from desktop vista boot

  How to remove the watermark of ' Wndows Vista Starter from the desktop? I changed the same wallpaper theme and also reviewed the "Bcdedit" cmd.exe... "but in vain.

  Unfortunately it is one of the many limitations of vista boot,

• I need to remove the program files o to send to:

  original title:?

  I need to remove the program files o to send to:

  I need to remove the program files o to send to:

  You want to remove entries from the right-click send to menu?

  If so, click on the round of Windows (start), type shell: sendto and hit enter. To remove a shortcut, right-click and choose Remove.

• account users: I need to remove the old user accounts

  I need to remove the old user accounts

  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Read the tutorial above.

  http://www.tech-recipes.com/Rx/2054/vista_how_to_delete_user_account/

  And meanings, too.

  The information above should solve the problem for you.

  See you soon.

  Mick Murphy - Microsoft partner

• you need to remove the license from computer to move to another PC.

  you need to remove the license from computer to move to another PC.

  It is all the information that I have and you can get on the product. I don't know when and who has been sold, or whose key is. Asked me to pass the software of an older laptop to a new laptop.

  Good luck with that.  Without a legitimate serial number, you're stuck.

  Download the Pro or Standard of X, XI or Acrobat DC versions

  Nancy O.

• I have a text field. I need to remove the first 8 characters of the field, leaving the remaining characters. Help?

  I have a text field. I need to remove the first 8 characters of the field, leaving the remaining characters. Help?

  Example:

  

  I need to remove these numbers PXXXXXX. Leaving the other characters.

  Thank you

  Bob

  A normal 'substring' is what you're looking for.

  For a formula of the column in the response criteria tab:

  SUBSTRING ("YourPresTable". "YourPresColumn" OF 9)

  

  To make the RPD and the workload of shipping off the coast to the database rather than forcing the work on the server of the OBI or presentation:

  Substring ("01 - Sample App Data (ORCL)" ".." ") "" "BISAMPLE '." " D10 product (dynamic table)". ("' Prod_Dsc ' 9)

  

• Need to remove the spaces between each words

  Hi guys,.

  I need to remove the spaces between each word. I'm doing this because I want to compare a column with a value.

  For ex: named - description "Negotiate APR - current balance" should be replaced by "NegotiateAPR-currentbalance.

  All can help me out here to achieve. Your timely help is well appreciated.

  Thanks in advance.

  WITH t AS (SELECT '"Negotiate APR - current balance"' str FROM DUAL)
  SELECT REPLACE (str, ' ') str
    FROM t;
  

  gives: "NegotiateAPR-currentbalance.

  Is that what you want...? If this isn't the case, please give some examples.

  See you soon,.

  Manik.

• PowerCLI Remove-NetworkAdapter questions - need to remove the single card

  I need to remove a single adapter via PowerCLI:

  "Get-NetworkAdapter - VM myvm" returns:

  Name Type NetworkName MacAddress WakeOnLan
  Activated
  ----                 ----       -----------  ----------         ---------
  Network adapter 1 e1000 VM Network 00:50:56:09:09:09 False
  Network adapter 2 e1000 VM Network 00:50:56:01:08:07 False

  I want to only remove the NIC 2, so I tried:

  "Remove-NetworkAdapter - networkadapter"Network adapter 2"which returns:

  Remove-NetworkAdapter: cannot bind parameter "NetworkAdapter". Could not be converted
  the value of 'Network adapter 2' to type 'System.String' to type 'VMware.VimAutoma '.
  tion.ViCore.Types.V1.VirtualDevice.NetworkAdapter ".
  On line: 1 char: 38
  + delete-NIC - NIC < < < < '2 network adapter.
  + CategoryInfo: InvalidArgument: (:)) [delete-NetworkAdapter], Pa)
  rameterBindingException
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomat
  ion.ViCore.Cmdlets.Commands.RemoveNetworkAdapter

  So I tried:

  $network = get-networkadapter VM - myvm

  Remove-NIC - NIC $network

  Who wants to delete the two network adapters:

  Confirm
  Are you sure you want to perform this action?
  Operation 'Remove network adapter' target 'NIC 1,
  NIC 2 ".

  So I tried

  $network = get-networkadapter VM - myvm

  Remove-NetworkAdapter NetworkAdapter - $network.networkadapter [2]

  Which returns:

  Cannot perform indexing in a null table.
  At line: 1 char: 63
  + delete-networkadapter networkadapter - $network.networkadapter [< < < < 2]
  + CategoryInfo: InvalidOperation: (2:Int32)], RuntimeException
  + FullyQualifiedErrorId: NullArray

  So, what don't get me?  I need to remove the 2 network adapter only.

  Any help would be greatly appreciated.

  -stephen

  You can do

  Get-NetworkAdapter VM - myvm | where {$_.} Name - eq 'Network adapter 2'} | Remove-NIC

  Note that a table of PS starts indexing at 0.

  If your last attempt should be

  $network = get-networkadapter VM - myvm

  Remove-NetworkAdapter NetworkAdapter - $network.networkadapter [1]