Need to replace drive HARD for my A205-s4777

I have a Satellite A205-s4777 since September last year and to restore once every 6 weeks from a boot disk.

Now, I discovered that the hard drive is faulty and I am trying to do a reset from the recovery disk until I can get a new hard drive. Any suggestions?

Also a brand new other that Toshiba will work ok in it or it will be a problem to try to do a reset. The Toshiba, one is still under warranty and I recorded it on the Toshiba registration site.

They will be able to send a new I am working abroad?

As I know you can use hard drives from different manufacturers, but you must use the right one. In your case, I think it should be SATA HDD.

What replacement? The best thing you can do is to contact the authorized service provider in the country where you bought your laptop. Explain the situation and they can offer you information on send them in other countries.

Tags: Toshiba

Similar Questions

  • Need to replace drive HARD for Satellite 2450

    My hard drive is about to die and I can't find a replacement/Exchange. Does anyone know how? References to this topic are 000601002 TOSHIBA 03152 S. Toshiba support said they dropped the product.

    Hello

    You n t need to buy especially this HARD drive device. You can buy a new one that supports the same old properties HDD Splendido.

    To my knowledge the 2450 Sat supports an enhanced IDE (ATA-5) interface. In this case, you can buy the HDD IDE.

    Please have a look also to the size of the HARD drive sometimes the BIOS could not recognize the HARD drive because of the limitation of the size.

    What size did you use? 40 GB? In my eyes, you can use a HARD drive between 20 and 60 GB.

  • I need to replace the hard drive and need to re - install my copy of windows 7

    I need to replace my hard drive due to intermittent faults and corrupt sectors can I any re - install my copy of windows 7 or do I need a new license number or something else

    You can use the same license, you may need to reactivate by phone:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • I need to replace my hard drive in my Samsung laptop, I have windows 7

    I need to replace my hard drive in my Samsung laptop, I have windows 7. I want to reinstall it on the new hard drive running on linux but on install windows 7 on a virtual hard drive, how can I transfer the activation code

    In other words, you can't.

    Assuming that your edition of Windows 7 is the one that supports the transfer of a virtual machine (i.e. the upscale home and more)...

    You will need to do a clean install of the virtual machine, using the retail media and the key of the COA sticker.

    You may need to activate by phone.

    Note that Samsung have historically refused to provide any form of media except through a factory install. This means that it is almost impossible to install the original media for anything except the original disk, using the recovery partition.

    Download the SP1 update for your chosen language and edition of the links on these pages...

    http://www.heidoc.NET/Joomla/technology-science/Microsoft

    The links are for downloads from the server of Digital River run for the Member States.

  • Hello! I need to replace the hard drive of my laptop Sony VPCEB33FM, serial No. 27532133-3071590.

    Hello! I need to replace the hard drive on my beloved laptop VPCEB33FM serial No. 27532133-3071590. that was purchased in the United States over two or three years.    I live in Switzerland and I think I might have to import a hard drive from the United States, how do I go about it and it would be easy enough to install it myself.  Is there a video I could watch that could help with the installation.  Thanks for any helpful answers.

    Hi... you can replace the HARD drive with disk drive hard Seagate ST9320310AS or Hitachi HTS545032B9S...

    You will find the site of esupport , HARD drive installation instructions... BTW, you need to use a recovery for the new HARD drive disk

    Hope that helps...

  • Replace drive hard hp pavilion dm3 after failure of hard drive test.

    All,

    I have a HP Pavilion Dm3. Windows 8 Beta. My error messages included: drive hard Test failed. Hard disk 1 (303) fast. Hard drive 1 full (395). Most recent upload has itunes. From what I see I need to replace my hard drive.

    My question is this; is there a manual or a guide on how to, 1. physically, replace the hard drive and 2. record information that may exist on my hard drive crashed? Thank you in advance for your help!

    Hello:

    There are many models of dm3.

    I pulled a repair of the dm3-2000 series. I hope that this layout is the same.

    Read Chapter 4 of the procedure on the removal and replacement of the hard disk. Do not throw the old hard drive.

    You will need to the caddy, the connector and screw to transfer to the new.

    http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01893277/c01893277.PDF

    Before you remove the hard drive, you can see if you can copy your files on a USB portable hard drive by downloading, burn it to a CD (using the ISO burning method) and make a the Kapersky rescue CD bootable CD. This will allow you to see the folders on your C:\ drive using the method of the graphical interface of the program execution.

    Then you can copy and paste your files on your portable hard drive.

    If the rescue CD can not see your hard drive, there's probably nothing you can do anything to the drive for recovery.

    http://support.Kaspersky.com/FAQ/?QID=208282173

    Paul

  • replace drive hard dv6

    I need to replace the hard drive of my 3225 dv6 dx, but the hp spare part is too expensive (hp # $ 603676-001-219). Y at - it another option that works with this model, but cost much less? (preferably under $100) I would appreciate any suggestions you may offer. If possible, a few options would be great, in the case where one or more is not in stock. Thank you!

    Happy that power will help you

    Thank you

    PLEASE CLICK ON 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM *.

  • Windows needs to install driver software for your DCC

    I installed the double mod. Windows Vista Ultimate & windows 8.1. When I started to pass on my laptop running windows Vista, it takes 5 minutes to open a session and message displays Windows needs to install driver software for your model of control abstract CDC (ACM)

    I don't understand how I can solve this problem.

    Thank you

    Try this link.

    https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20driver%20SOFTWARE%20CDC%20abstract%20control%20model%20$ $ACM & ac = 5 #refinementChanges = & pageNumber = 1 & showMore = false

    In addition, with some PCs, you can select boot options, with dell, the F12 key to start the pc. Also, try this link for dual

    Starting the OS.

    https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20pc%20startup&AC=6#refinementChanges=60&PageNumber=1&showMore=false

  • Windows needs to install driver software for your ethernet controller

    Hello

    IM using HP G7000 notebook OS vista and when I turned it on: windows needs to install driver software for your ethernet controller. This driver will install?

    Download and install driver Atheros ofhis

  • I need to replace the hard drive for a campaq presario v5000 laptop

    having trouble with the laptop is very slow or freezing upwards.  Had he wiped and all the info on it but did not help the cause.  Message has started to come up on top of the hard drive and then it just stopped working.  My daughter who works in the field of Informatics said I need a new hard drive.  So now I need to know what parts I need to buy

    Just a new hard drive.

    Above is the image of the Bay on the lower part of the lasptop where the player will. You need an old drive portable PATA (IDE) model. Remove the drive from the caddy and replace it with a new one, new plug-in and recharge your software and you're good to go.

    Here's a disc that will work for you to newegg.com:

    http://www.Newegg.com/product/product.aspx?item=N82E16822152110

  • Help, I need to replace my hard drive in my hp pavilion a6863w how can I do this?

    The surface of the hard drive, test and get the test failed, a seagate 2 TB SSHD. I want to install it and I'm sure that I can do, but I need to know if I should leave the wrong disc in and just add this one, if I do this will it take all other cables, if yes, I'd rather just old-fashioned.
    I have the recovery install disks that I made when I bought first. I used these b4 to reinstall.

    I just need to know the steps if I add the 2nd disc or steps (if I need a cable) to replace the old disk with a new disk. This player would be my boot drive? When I ask for the steps, I'm more concerned about turning off the computer and what is it I have unplugged, etc.. Then once the new drive up, just run the recovery discs or y at - it an easier way?
    I tried to run a backup, but he stopped and wouldn't let me. I have all my important things like photo movies already saved etc.

    HP pavilion model # a6863w. Windows vista 64-bit

    panjok2 wrote:

    The surface of the hard drive, test and get the test failed, a seagate 2 TB SSHD. I want to install it and I'm sure that I can do, but I need to know if I should leave the wrong disc in and just add this one, if I do this will it take all other cables, if yes, I'd rather just old-fashioned. Remove the old drive, replace it with a new one and use the set of recovery disks. Choose factory image recovery.
    I have the recovery install disks that I made when I bought first. I used these b4 to reinstall.

    I just need to know the steps if I add the 2nd disc or steps (if I need a cable) to replace the old disk with a new disk. This player would be my boot drive? When I ask for the steps, I'm more concerned about turning off the computer and what is it I have unplugged, etc.. Then once the new drive up, just run the recovery discs or y at - it an easier way? Put the new drive in the same place as the old one and use the same cables (data and power) who were connected on.
    I tried to run a backup, but he stopped and wouldn't let me. I have all my important things like photo movies already saved etc. If the player does not, then try to save something from him is a waste of time because the hard disk controller has failed, too.

    HP pavilion model # a6863w. Windows vista 64-bit

    How to replace a hard drive.

    The video and images shoud help.

  • You need to replace a hard drive in XPS 8300...

    Hello

    the hard drive on my XPS 8300 failed and I need to replace. I know that my data will be lost, but if I replace hard drive how to return applications such as Microsoft Office, I had already installed? They did not come on CD, but have been preloaded when I bought the computer.

    Thanks for the replies.

    Manage, download, save or restore specific products:

    Products.Office.com/.../Download-back-up-Restore-Microsoft-Office-Products

  • Upgrade Windows 7 to 8, now need to replace the HARD drive.

    Hello

    Last year, I think it was, I upgraded my system from Windows 7 to Windows 8.

    Now, I need to replace my operating system is stored on hard disk.

    How can I do to do that I have no physical support for Windows 8 and I don't know that I have still my Windows 7 disc or product keys.

    Thank you

    Chris

    First, create a backup of your installation of Windows 8 on an external hard drive:

    http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

    Then, create a repair disk:

    http://winsupersite.com/article/Windows8/Windows-8-tip-create-recovery-media-144098

    -Shutdown your computer.

    -Uninstall the existing hard drive.

    -Install the new hard drive,

    Boot from the recovery media that you create.

    Make sure that your external hard drive is plugged, plugged in and turned on.

    (a) in the screen install now

    (b) click on repair your computer

    (c) click on Advanced Options

    (d) click on troubleshoot

    Click on Advanced Options

    Click System Image recovery

    Wait while the System Image recovery is ready

    Choose your account

    Enter your password and click on continue

    See the following article for instructions on how to complete the restore:

    http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

    Once the restore is complete, you will be asked to reboot.

  • Satellite L300D-10B - need to replace the HARD drive

    Hello.

    I have a Toshiba satellite L300D-10B and I need to replace the broken hdd in my laptop.
    It is a hitachi 160 GB at 5400 RPM SATA.

    Is it possible to move to a greater capacity (500 GB) and a little faster (7200 RPM).
    is - that someone at - he had success with any particular model?

    Hello

    In my opinion, is not a big problem to use a faster and larger HARD drive.
    The laptop supports the SATA HDD controller and this controller must be able to manage these drives.

    Welcome them

  • HP Pavilion g7-1167, which is needed to replace the hard drive

    In fact, I have a few questions.

    First of all, I was streaming How I Met Your Mother online when a box appeared and gave a kind of message (I don't remember now). He was just sitting there, so I restarted the computer. After the reboot, the computer would not go beyond the screen "start wondows. I ran a dignostic and it says that the short test failed. I then ran a diagnostic in the bios and it ran the short test, he failed, then he ran about 5% of the test long then stopped and said "hard drive full 1."

    After looking online, I think it's a sign that it crashes. I already ordered the new hard drive and the kit at HP.

    But now I need to know how to get all my info out of it. My brother has an external hard drive that I can use, but I don't know if it will work.

    In addition, once I have installed the new hard drive I think I need to re - install windows and something else? Do I have to re - install and how do I do that if I don't have the disks? Can I do a recovery on that disk now, or is it too late? If so, how do I?

    I'm sorry, I don't know anything about computers, so any help is greatly appreciated.

    Hello

    First of all, about your existing data, here are some options that you can try.

    1. one possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

    http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

    2 another option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

    External 2.5 HARD drive caddy ".

    **********************************************************************

    Regarding the reinstallation of the operating system on the new drive, I don't think that you will be able to create a viable together your disc recovery disc HARD existing, but you can order a set of replacement of the HP recovery discs using the link below.

    Order HP recovery disks.

    If you have a problem with this link, order them directly from HP.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

Maybe you are looking for