Need to retrieve the string after the 2nd comma.

Similar Questions

• Need to retrieve the BONES but do not have the habit of losing data on the HARD drive

  Dear all!

  For long time now, I tried to disable a Trojan horse or a worm, on my Windows XP Home (Home!) i.e. get rid of the cftmon_.exe, when I decided to follow the instructions from Symantec and pieces manually deleted from the register, I guess she was part USERINIT (turn off the system before restore and put on after the deletion).

  It can be as well as I did not right, something after the fact that I have would be to end the session at the time the logon process has started. This is relatively known issue here, with different options.

  -J' need to keep the data on two HARD drives.
  -I have no other partitions.
  -I don't know what I've got on one of them, which I could use to free space Recovery Expert mode.

  a. the fact that I want to take the option with Toshiba, which is Expert mode (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2513&tstart=125) as a last recovery, DVDs on

  b. I have trouble with the installation of the Recovery Console (with Windows XP (Professional!) original CD, 'R' for 'fix), but I would get the message "Setup has not found hard disk units installed in your computer"...
  I understand that I would need to install the driver RAID (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20093&messageID=73758) but I'm afraid that this may delete the data on the disc.

  My questions are the following:

  1 install the RAID driver (downloaded from the Toshiba off site web http://support.toshiba-tro.de/tools/updates/raid-drv/raid-drv-qog20-xp-1380.zip and installed on the floppy drive I guess) so we hope to install the Recovery Console, and do the rest of the work, make data disappear my 2 (remove) HARD drives?

  2. If I use Toshiba Recovery DVD, Expert mode that is finally what is the size of partition should be recorded for the mirror on the half vacuum 1.HDD?, should I partition 2 HDD, after it backup and count data will be lost? Choose any setings special during the process, apart from those mentioned in the link above? What should I do after wards? The registry damaged when you logged in and how can I build? I will be able to use personal and archive data from Microsoft Outlook?

  3. is there a alternative with UBCD4Win and UBCD? What is the best? What is the procedure of after the start of the CD after reboot? How to copy/repair the userinit files?

  I'm sorry for the load of information, but I am pretty stuck. All the necessary data for my normal life are buried here!

  A big thank you JohnnyS, tw, Quad, Eldorado and many others!

  See you soon!

  Hi friend

  I would like to respond on comments like yours, it s a good exercise for my work and my s really cool to have a few topics which will help all the people here.

  JohnnyS is a friend of mine who works with me at our office and we talked a bit about your problem.
  If his opinion is to use the UBCD4Win and work with this option.

  The advice from him were:

  Take a USB - HDD enclosure and put a disk in it and start with UBCD4Win. Copy any important data in a folder on the external HARD drive, then remove the uneeded data on this subject. Only important data!
  Make a backup of your data on the external hard drive for two HDD´s I hope that you have enough free space.

  Format the drive in your machine and get it back. Install the system as usual on your first HARD drive.
  Then put the data anywhere.

  So I don't know if I have it just ask, a little more explanation would be useful. I think that this is a long thread. ;)

  Welcome them

• Need to retrieve the data for the current date.

  Hello

  I have a table which then retrieves information when using this command.

  Select ta_acct, shift, created_on track_alerts;

  Technicolor A 24 March 14

  Technicolor A 24 March 14

  Technicolor A 24 March 14

  Technicolor A 24 March 14

  Manitoba telecom a 24 March 14 system

  Technicolor A 24 March 14

  I used this statement to retrieve the data for the given date.

  Select ta_acct, shift, created_on track_alerts where created_on = 24 March 14 ';

  Its not data recovery.

  Need help.

  Kind regards

  Prasad K T,.

  984002170

  Prasad K T wrote:

  Yes the created data type is date.

  CREATED_ON

  DATE

  Partha thanks it works now.

  Select ta_acct, shift, created_on in track_alerts where to move is: Shift and TRUNC (created_on) = TO_DATE('24-MAR-2014','DD-MON-YYYY');

  Still, I made a small change to my querry.

  Select ta_acct, shift, created_on track_alerts where to move is: shft and TRUNC (created_on) = TO_DATE (select double sysdate,'MON-DD-YYYY "");

  For this statement, it does not work.

  of course not...

  first: sysdate returns a date so no need of conversion here

  and

  second SYSDATE includes time, so your application should look like this:

  Select ta_acct, shift, created_on in track_alerts where to move is: Shift and TRUNC (created_on) = trunc (sysdate)

  or

  Select ta_acct, shift, created_on in track_alerts where to move is: shft and created_on > = trunc (sysdate) and created_on<>

  HTH

• Need to retrieve the Satellite L450D-14V

  Hello

  computer laptop first time user
  I recently bought the laptop aboe on windows 7, and unfortunately, I need to recover the system and do not have a disk to

  So I was wondering if you could please help
  Total novice here.

  Hi Kristy

  If you check the [Toshiba product Recovery | http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=49&start=0] area here in this forum, you will get a lot of discussion on this topic

  The laptop can be recovered using the recovery disk or recovery disk that you can create using the preinstalled software called Toshiba Recovery Media Creator.

  As I said above: more details could be found in different threads a user manual.

• Need to retrieve the values of a column

  
  Hi Experts,

  I need extract values and store them in a separate column. Can someone help me to write the function to extract the data from the column.

  I have a DOC_NO of column I need to extract the date of birth, sex, nationality

  Doc_no: 080 9005070288

  Date of birth: 900507-yyddmm

  Sex: 0288-if less than 5000 can male other female

  Nationality: 080 - 0 means the India 1 forgiener.

  Thank you

  Emmeline

  Simply this:

  Select substr (doc_no, 1, 6) Date of birth, case where 5000 > to_number (substr (doc_no, 7, 4)) fitting and "masculine" of other 'female' gender, then substr (doc_no, 11) nationality

  from table_name

  Don't know what 0 you have been pointing to nationality, but you can certainly change the last substr to deduce from this area.

• Need to retrieve the records whose salary is higher than the max of avg salar

  I wrote a query to retrieve the data whose salary exceeds the maximum salary of the avg of all departments
  

  SELECT * FROM EMP WHERE SAL>
  (SELECT MAX(AVG (SAL)) FROM EMP
  GROUP BY DEPTNO)

  I would like to write that this query using the associates.
  
  I tried
  

  SELECT EMPNO,ENAME,SAL FROM EMP E1
  WHERE SAL > ANY( SELECT MAX(AVG(SAL)) FROM EMP E2
  WHERE E1.DEPTNO  = E2.DEPTNO)

  It gives me error that we cannot use a function nested in the collateral.
  
  What is the solution of the present?
  
  Thnks

  This?

  select * from emp a
  where exists
  (select 1 from emp b
  where a.deptno=b.deptno
  and a.sal>(select round(max(avg(sal))) from emp group by deptno));
  

• Need to retrieve the text of a URL and store in a variable

  Looking for advice here, I can do this in PHP, but I'm too new to CF doesn't know it yet. To spend of PHP to the CF would mean sending these variables in the URL of the web that I want to avoid.
  
  Basically I have a precompiled java module I should use referring a Y or N to verify authentication.
  I need to create the next scenerio:
  
  Display with the username and password form;
  Enter the name of the user as user name and password as password
  From the screen of the http:/intranet/servlet/WebLogin URL, get Y or N? UserID = XXX & Password = YYY
  Store the results of the verification as a global variable
  
  My attempt of CF:
  < cfform = "loginform" action = "http:/intranet/servlet/WebLogin" name
  method = "Get" >
  < table >
  < b >
  user name < td >: < table >
  < td > < cfinput type = "text" name = "UserID" required = "yes".
  message = "a user name is required" > < table >
  < /tr >
  < b >
  password < td >: < table >
  < td > < cfinput type = "password" name = "Password" required = "yes".
  message = "a password is required" > < table >
  < /tr >
  < /table >
  < br >
  < input type = "submit" value = "Log In" >
  < / cfform >
  
  -This code works to redirect the display URL displays Y or N, but how can I not enter the result and store =)
  
  
  : My PHP code to do this (works completely)
  <? PHP
  
  $url = ' http:/intranet/servlet/WebLogin? UserID = XXX & Password = YYY';
  $html = file_get_contents() ($url);
  If (preg_match ('/ Y /', $html, $matches))
  {
  echo "success."
  }
  on the other
  {
  ECHO 'no success ';
  }
  ? >
  
  
  Thank you all

  Quote:
  Posted by: nborton
  ... ...
  From the screen of the http:/intranet/servlet/WebLogin URL, get Y or N? UserID = XXX & Password = YYY

  Galloping gargoyles! There are so many things wrong here!

  Anyway, if you're stuck with this approach, you will need to use cfhttp to get the result.

  Something like the attached code should help you get started.

  Edit: fixed error of syntax IsDefined...

• Need to retrieve the password for Xbox 360 Windows Live ID.

  Original title: password retrieve

  In my xbox 360 windows live ID, I have my password and it was removed, I have to contact microsoft windows but nothing.what do I do?

  Hi ElvisKiekebosch,

  ·         Remember to make changes to the computer, after which the issue started?

  ·         What operating system is installed on the computer?

  ·         You get the error message?

  Try the steps from the following links and see if it helps:

  Error: The e-mail address or the password entered is not valid

  The Windows Live ID management

  The problems of connection to your Xbox LIVE account

  I hope this helps.

• Re: Satellite P300 - need support for the 2nd HARD drive

  Anyone know where to find support for a 2nd hard drive of my P300-17R laptop? Modelnumber; "PSPC4E-04701LDU.
  It must be sent to the Netherlands.

  Check eBay. You will find everything.

• Need to retrieve the HARD drive off accident T61

  My T61 crashed a while back and I would like to recover the files from the hard drive. The T61 used BIOS protection to prevent any intrusion HDD. I have my password, but no way to use it. I can attach it to another computer via the USB port, the drive will appear as unallocated. Suppose I need to ask for the password. Don't know how to do this. I have an older T60, but have been hesitant to connect this drive in it as the main drive, because the components are a little different and may not react as well. Certainly not worth damage to a work computer.

  What is the best way to recover these files?

  Thank you!

  Welcome to the forum!

  You won't damage the T60 by inserting the hard disk stuck in it, and the material must be close enough for you to be able to clear the password in the BIOS and then to recover the files.

  Good luck.

• Need to retrieve the names of columns with PK

  Hi all

  guys I need to get two columns (PK information and secondly with the column name) for the table. I see that's not so easy with Oracle ;(

  I have this for now:

  SELECT all_tab_cols.column_name,user_constraints.constraint_type
  FROM   all_tab_cols, user_cons_columns, user_constraints,user_ind_columns, user_indexes
   WHERE  all_tab_cols.column_name = user_cons_columns.column_name (+)
     AND  all_tab_cols.table_name = user_cons_columns.table_name (+)
     AND  user_cons_columns.constraint_name = user_constraints.constraint_name (+)
     AND  user_constraints.constraint_type (+) = 'P'
     AND  user_ind_columns.column_name (+) = all_tab_cols.column_name
     AND  user_ind_columns.table_name (+) = all_tab_cols.table_name
     AND  user_indexes.uniqueness (+) = 'UNIQUE'
     AND  user_indexes.index_name (+) = user_ind_columns.index_name
     AND  all_tab_cols.table_name = 'MYTABLE' 
  

  but, if KP is then take result duplicate me lines and there is not a simpler way? just need to list all columns of the table with information about the PK

  SELECT acc.column_name,
    ac.constraint_name
  FROM all_constraints ac,
    all_cons_columns acc
  WHERE ac.owner        =acc.owner
  AND ac.constraint_name=acc.constraint_name
  AND ac.table_name     =acc.table_name
  AND ac.constraint_type='P'
  AND ac.table_name     = 'MY_TABLE'
  UNION
  SELECT column_name,NULL FROM all_tab_columns WHERE table_name='MY_TABLE';
  

• Need to retrieve the last line/record in a table

  Hello
  
  I have a requirement like getting the ending balance of the last record in the table and the same insertion in the opening balance of the immediatetly created the next record.
  
  In simple terms, I need to extract a value from the last line of the recording.
  
  For example, I use the query below
  
  Select rownum emp, empno, ename
  where rownum = (select count (rownum) from emp);
  
  But, the above query does not return all of the recording.
  
  Therefore, need help on this.
  
  Kind regards
  Shivakumar has
  
  Published by: shiva March 27, 2011 22:14

  Hello
  Strictly speaking there is no such LAST or FIRST folder until that order you them.
  But check the following:

  SELECT * FROM emp MINUS
  SELECT * FROM emp WHERE rownum<=(SELECT count(empno)-1 FROM emp);
  

  Kind regards
  Lakshmi.

• Programming logic needed to retrieve the records for the last month/week

  Hi all
  
  I need assistance in programming SQL logic.
  
  Oracle database version: 10.2.0.3.0
  
  Requirement
  
  In an environment of DW, I need to program to weekly and monthly automated batch insert the data from Data_tbl to Reporting_tbl to generate reports. Descriptions of paintings are given below.
  
  Table 1 - Data_tbl (Source of table - this table is updated daily).
  
  Record_dt first name last name
  
  
  Table 2 - Reporting_tbl_ (the target table)
  
  Cycle_dt first name last name
  
  1. monthly report
  
  In the SQL query, I where clause conditions.
  
  Where Record_dt > = 1 November 08 ' and record_dt < = 30 November 08 '
  
  Using the above condition in development, I'm pulling over the last months data source table data. This will be repeated every month, and it should be automated.
  that is, if I run this report at any time in December 2008, he should choose documents dates from Nov 01 to November 30, 2008. If I run this report at any time in January 2009, he should choose documents dates to Dec. 01 to December 31, 2008.
  Date values must be assigned for the last month. Value of Cycle_dt in the target table must be the date of the end of last month as on November 30, 2008, 31-dec-2008.
  
  
  2 weekly Report
  
  In the SQL query, I where clause conditions.
  
  Where Record_dt > ='01-dec-08' and record_dt < ='' 07-dec-08
  
  Monday week start date and end date is Sunday.
  If I run the report between the 08 Dec-14 Dec, it should make records of the dates of Dec. 01 to December 7, 2008.
  On 15 December, he should seek from 08 Dec-14 Dec.
  Value of Cycle_dt in the target table must be the date of last weekend, as on December 7, 2008, December 14, 2008.
  Please help me with the logic for both monthly and weekly reports.
  
  Thank you

  Hello

  TRUNC (dt, 'W') is the beginning of the week, which may be different days, according to the NLS parameters in your session. Unless you want something that varies from one session to the next, you should stick with the weeks of ISO.

  TRUNC (SYSDATE + 1, 'IW') - 1
  

  is the Sunday of the week underway Sunday to Saturday, which starts and ends in 1 day before the ISO week.
  To find the precedent of the week from Sunday to Saturday:

  WHERE   record_dt >= TRUNC (SYSDATE - 6, 'IW') - 1
  AND     record_dt <  TRUNC (SYSDATE + 1, 'IW') - 1
  

  If you were interested in a week from Saturday to Friday (either 2 days earlier than the ISO week):

  TRUNC (SYSDATE + 2, 'IW') - 2
  

• Help! You need to retrieve the Junk folder is empty.

  I checked e-mail boxes in the junk as "not junk" folder and they went successfully to the Inbox, gates must have clicked 'empty' in the spam box. These emails I wanted to read in my Inbox disappeared and never have the Inbox. How can I get back them? I'm desperate!

  Thank you

  Sorry, I have no idea why someone refers you to the Firefox support for a problem with Hotmail / support Outlook.com . Firefox does is display the data that is stored in Hotmail, through Outlook.com interface; Firefox does not record anything - no emails, no record or anything. The only thing that Firefox stores is a cache of what has been seen to Outlook.com. You can try to clear the "hide" & cookies to see if that helps you.

  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     Click on the history button, and then click clear recent history...

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  Also see these.
  http://Windows.Microsoft.com/en-us/Hotmail/Hotmail-help
  "All Hotmail customers have been upgraded to Outlook.com."
  http://Windows.Microsoft.com/en-us/Windows/Outlook-help
  http://email.about.com/od/Outlook.com-tips/Qt/how-to-contact-Outlook-COM-support.htm

• Lost recovery key and need to retrieve the current data

  Yes.

  It's a really bad situation.
  In order to regain sync I have to generate a new recovery key
  But the recovery key generator will mangle the data synchronized.

  Is it possible to recover the data?

  I was not able to sync with Firefox on Android and a few days ago my hard drive gives up so I had to reinstall windows.

  It is amazing that nobody reads the entire post.

  "I was not able to sync with Firefox on Android and a few days ago my hard drive gives up so I had to reinstall windows."

  Where was the big warning sign when I joined firefox sync?.

  Thanks for a useless service. Now, I have a lot of passwords to reset...