Need to update Wireless DSL internet connection very slow in Vista driver.

I have a dsl connection, the wireless is very slow.  I have windows vista and bought an ethernet cable and I can not connect via cable. My technician suggested I need to download a driver for a cable modem but can not find such a download via windows vista

* original title - I need to install a driver for the ethernet cable, I bought for my dsl connection but cannot find a windows vista driver *.

You do not receive a download for an Ethernet cable.

Make sure you have the right cable

And go to the site of the Modem Manufactutrer'e and are looking for the latest version of the Firmware/software for the modem.

Or if it's the drivers for your network adapter you are referring to:

Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

If you have additional problems, I suggest that you ask that technician who advise you on this issue download driver problem.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • WRT54GL: Fast cable internet connection; very slow wireless

    I have been chasing a problem for months and I am at the end of my mind.

    I started with a cable modem Motorola SB5101 and Buffalo bison wrt-hp-g54.  For years, we had a (intermittent) desperately slow wireless connectivity.  Recently I started to run through Speakeasy.NET speed tests to try to find a motive.

    Wire speed is consistently running 15-16 Mbit/s, compatible with the speed promised our cable package.

    Wireless speeds were a different matter.  From multiple computers, they would sometimes as soon as the wire speed; then all of a sudden (from all wireless computers) the speed would fall to 0.5 Mbit/s or less, then the speed measured on our single wired computer remained at 15 Mbps.

    Restart the router would mitigate the problem for a while, and then the wireless would fall up to 0.5 Mbps.

    Wire speed would remain stable at the nominal 15 Mbit/s.

    Well, looked like a bad router.  I replaced it with a WRT54GL hardware version 1.1.  I've updated the firmware to the last - v4.30.16.

    I selected a channel (2) wireless network what inSSIDer 3 watch is not used by any neighboring router (i.e., no interference).  I have that checked regularly and am sure that interference is not the problem.  The router is configured for the wireless G only; WPA - AES.

    The same problem occurs with the new Linksys router.

    In desperation I replaced the old modem SB5101 with a new SB6141 cable, not believing there could be everything possible that could help but, this what the devil - we will eliminate it as a factor as possible and go to DOCSIS 2.0 to DOCSIS 3.0.

    The problem persists.

    Thus, new router, cable modem brand new, constant wire-speed, without strong signals wireless, channel interference all around. but the problem persists. There has been no improvement on the old hardware I used.

    All computers, but a (XP Pro) is running Windows 7 Pro.

    The problem is not predictable, except that the speed degradation will happen sooner or later - and this is not progressive.  Suddenly, he fell like a stone and sticks to 0.4 to 0.5 Mbits/sec.  Reboot the router (usually) will fix it for a while, and sometimes it will clear up on its own, given enough time.

    I ran inSSIDer several times while this is happening, but he sees no other no signal on the channel I use--in fact, none on adjacent channels either.

    I checked from wireless to the router table and there is no other than our device, so it does not appear that the network has been hacked.

    Does anyone have an idea what might be going on or suggest an action plan?

    The only thing I can think is that there is something between the router and the computers wireless in the House which is eating up 95% of the bandwidth wireless - a sort of voting out of control.  But what?  I'm completely stuck.

    Follow-up.  I changed the channel 1 wireless; After doing some research I realized that sharing a channel (as long as your signal is at least 20 dB louder) causes fewer conflicts overlapping channels.  I have not changed anything else.  I'm tempted to allow the break-up of the frame but implementation of that seems to be somewhat specific to the supplier so I'll let it be.  In any event the wireless speed now as fast as the wire speed.

    The result is that since the re - install the Linksys firmware and do a hard reset that I saw not a single instance of the speed problem.  So I still don't know exactly what caused in the first place, but I'm glad that the problem has disappeared, so I'll just let things be.

    Thank you!

  • My wifi/internet is very slow since the IPhone Update 9.3.4.

    I have an IPhone 6 and since the update (3 days ago) my wifi/Internet is very slow.

    Minutes of need for pages to load, and the App Store and the ITunes App not to load any. Photos and videos need a time very Long if they work at all.

    The wireless router is not the problem because my laptop works fine with it.

    Thank you for responding!

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom.

    Alternatively, you can try to reset the App Store first, since it won't load at all. Please follow these steps:

    Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

    Then restart the unit.

    Then sign into the iTunes Store and try to download again.

    (1) restart you device.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

    Council: https://discussions.apple.com/docs/DOC-9892

  • I get this error DNS tries to connect to facebook, but no other site I noticed my internet is very slow right now too.

    I get this error DNS tries to connect to facebook, but no other site I noticed my internet is very slow right now too.   Error 105 (net::ERR_NAME_NOT_RESOLVED): could not resolve the address of the DNS server

    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Users\mark>ipconfig/all
    Windows IP configuration
    Name of the host...: cookiemonster
    Primary Dns suffix...:
    Node... type: mixed
    Active... IP routing: No.
    Active... proxy WINS: No.
    ... DNS suffix search list: ccrtc.com
    Wireless Network Connection 3 Wireless LAN adapter:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Virtual WiFi Miniport adapt
    Physical address.... : 68-A3-C4-22-8B-C3
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Ethernet connection to the Local network card:
    The connection-specific DNS suffix. : ccrtc.com
    Description...: Realtek PCIe FE Family Controller
    Physical address.... : 64-31-50-43-AE-8F
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::3458:a8df:c03c:d596% 12 (Preferred)
    IPv4 address...: 75.103.136.150 (Preferred)
    ... Subnet mask: 255.255.252.0.
    Lease obtained...: Wednesday 10 October 2012 21:16:34
    End of the lease...: Thursday, October 11, 2012 21:16:34
    ... Default gateway. : 75.103.136.1.
    DHCP server...: 209.132.160.25
    DHCPv6 IOOKING...: 207892816
    DHCPv6 DUID customer...: 00-01-00-01-14-FF-6D-A2-64-31-50-2E-2F-F5
    DNS servers...: 209.132.160.4.
    209.132.160.5
    NetBIOS over TCP/IP...: enabled
    Wireless network connection Wireless LAN adapter:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: 802.11n wireless network adapter
    Physical address.... : 68-A3-C4-22-8B-C2
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Card adapt 6TO4 tunnel:
    The connection-specific DNS suffix. : ccrtc.com
    ... Description: Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    IPv6 address: 2002:4 67 b: 8896:4 b 67:8896 (Preferred)
    ... Default gateway. : 2002:c058:6301:c058:6301
    DNS servers...: 209.132.160.4.
    209.132.160.5
    NetBIOS over TCP/IP...: disabled
    Card tunnel Teredo Tunneling Pseudo-Interface:
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    Active DHCP...
    . . . . . . . . : No.
    Autoconfiguration enabled...: Yes
    IPv6 address...: d 2001:0:9 38: 6ab8:3482:e41:b498:7769 (preferred
    EXEs)
    Address IPv6 local link...: fe80::3482:e41:b498:7769% 16 (Preferred)
    ... Default gateway. :
    NetBIOS over TCP/IP...: disabled
    Tunnel adapter ISATAP.ccrtc.com:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. : ccrtc.com
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    C:\Users\mark >

    Hello

    Thanks for asking! If I understand correctly, you cannot connect to Facebook and get error, Internet is also slow. Try the question of fixing.

    Before I continue, I would like to collect some personal information.

    1. have there been recent changes to the system before the show?

    2. what web browser do you use?

    Method 1:

    Follow this link can not connect to some Web sites to perform the troubleshooting steps. Check if it helps.

    Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

    Method 2:

    Follow this link Internet connection is slow , and perform the operations. Check if it helps.

    Method 3:

    Follow this link, Update driver and update the network map. Check if it helps.

    For more information, see: link

    Answer us with the results. I'd be happy to help you further.

  • Where to find a version of service pack 1 xp this need does not have an internet connection to install?

    service pack 1 xp

    Where to find a version of service pack 1 xp this need does not have an internet connection to install?

    The only version I know is the "broken" here:

    As is the case, assume that you can't get it.
    Why do you think you need? Were you running just a Clean Install? Or you are planning to do this? (And if so, why? It is VERY rarely necessary!)
  • Internet connection is slow

    Original title: network problems

    I recently installed Windows 7 ultimate and my download speed is slow before I was Home Basic installed and I get 5-6 Mbps speed, but after installation of win 7 ultimate gets my download slow (approx. 1 MBps) speed... Why is this happening? pls tell how to fix this... Thank you very much...

    Hi Amit,

    Welcome to the community Microsoft and thanks for posting the question.

    According to the description, the download speed is slow after installing Windows 7 Ultimate in the computer.

    I suggest you to return the items to solve Wifi problems on the computer:

    Method 1: To reset the TCP/IP stack, try to go to this article and either click ""help me ' or follow the instructions to repair yourself: "

    http://support.Microsoft.com/kb/299357

    Method 2:

    Why is my Internet connection so slow?

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

    Method 3: Temporarily disable the security software and firewall settings and check if the Internet connection drops.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    For more information:

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    The problems of Internet connection

    http://Windows.Microsoft.com/en-CA/Windows-Vista/troubleshoot-Internet-connection-problems

    Note: the article above applies to Windows 7.

    Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

  • Internet connection is slow after changing the MAC address

    * Original title: win7... problems with internet after changing the WIRELESS card MAC address

    I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

    Hello

    1. what made you want to change the MAC address?

    2. what exactly happens while you are trying to connect to the internet?

    3. you receive an error code or error message? If Yes, what is the full error message?

    4 have you checked the issue in internet explore as well?

    Please follow the steps below and we update with the results.

    Method 1: Run the network troubleshooter, and check.

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    Please try following the steps provided in the article and check out them.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    For more information, see the articles and check out them.

    10 tips to help improve your wireless network

    http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

    Why is my Internet connection so slow?

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

     

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Let us know if it helps!

  • my internet is very slow

    Hi, I have a new toshiba and despite my efforts, that the web is very slow, how to work faster, I have other computers that run faster on the same network

    Hello
     
    Thanks for posting in the Microsoft Community Forums.

    We're here to help and guide you in the right direction.

    Help with little information.

    1. what browser you use on the computer?
    2. you use Wired internet connection / wireless?
    3. this problem happens only with any web site in particular or all Web sites?
    4. have you received an error message/code?
     
    I suggest you to follow the steps from the links and check out.
     
    Why is my Internet connection so slow?
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

    Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

    Response with more information to help you.

  • Internet connection is slow or simply cut

    Original title: connection problems

    Hi, I had problems with my internet connection, it will be slow or it just stops and I can't go back with duty to restart the computer.

    I don't think it's my router because all other devices work in the router with no problems, and I have my computer away from the router, but the other computer works fine here.

    I'm really tired almost everything. I even deleted all of my computer.  I would be completely restored my computer to factory but I don't have the disk to do so.

    So basically my question is what do I do?

    Hi MarCheri,

    ·         What version of the operating system is installed on the computer?

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Why can't I connect to the Internet?

    Why is my Internet connection so slow?

    For reference:

    Windows wireless and wired network connection problems

    How can I troubleshoot network card?

  • Can not install a security update Cumulative for Internet Explorer 8 for Windows Vista (KB978207)

    I tried to download this update for over a month, but every time I try it fails. I get this error code:

    A security update cumulative for Internet Explorer 8 for Windows Vista (KB978207)

    Installation status: failed

    Error details: Code C 8007371

    Update type: Important.

    Can someone please help me I would be very happy! Thank you!

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • My internet connection is slow. Downloads at 25-52 kb/s. How do I speed it up. Flag p2-1033w

    My internet connection is slow. Downloads at 25-52 kb/s. How do I speed it up. Flag p2-1033w. Windows 7 64-bit.

    Scientists, welcome to the forum.

    It is a problem that could be better solved by your ISP.  They have an incentive to keep you happy.

    I use CenturyLink DSL.  I'm supposed to download to 7Mbps.  However, most of the time it's around 5 Mbps.  Whenever it drops below this figure, I reboot the modem and if this does not help, call the Customer Service at the CL.  They perform part of their magic and it works well again until the next time.  Of course, they make me jump through hoops to make sure that it is not my computer at the origin of the problem.

    If your problem is solved, please click "accept as a Solution.

  • A security update cumulative for Internet Explorer 8 for Windows Vista (KB969897)

    A security update cumulative for Internet Explorer 8 for Windows Vista (KB969897)
    It's the new and important update on the 09.06.2009.
    I tried to install, an error code 80070570 appeared...

    How can I get this facility because it is under the status of "Important"?

    Please try the following: click Start > run > type the commands to follow in the area open (one at a time, in order):

    RegSvr32 C: \ WINDOWS-system32-c:\windows\system32\wuapi.dll

    RegSvr32 C: \ WINDOWS-system32-c:\windows\system32\wuaueng.dll

    RegSvr32 C: \ WINDOWS-system32-atl.dll

    RegSvr32 C: \ WINDOWS-system32-c:\windows\system32\dllcache\wucltui.dll

    RegSvr32 C: \ WINDOWS-system32-c:\windows\system32\wups.dll

    Today, it was a good day, I didn't have to use my AK.

  • Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

    Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

    I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

    They did not work.  So, will you be able to help me find a solution?

    Thank you

    Ken

    Hello

    1. is that the copy of windows is enabled?

    2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

    I suggest to perform the steps in the following article and check.

    Method 1: run the Windows update troubleshooting tool and check.

    The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

    Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

    To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below for more details:

    How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
    http://support.Microsoft.com/kb/929135


    Note:
    When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

    Method 3: If the problem persists, follow the steps in the following article.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

     

    Note:

    un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ( )

    How to back up and restore the registry in Windows

    b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

     

    For reference:

    0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/946414

    Note:

    un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ( )

  • KB2675157 of a security update cumulative for Internet Explorer 8 for Windows Vista fails to install

    Maintains a security update cumulative for Internet Explorer 8 for Windows Vista (KB2675157) do not install - tried "fix it" and that did not work - any ideas?

    Hello

    1. don't you make changes on the computer before the show?
    2. what difficulties did you try?
    3. do you get an error message?
    4. are you able to install some other updates?

    Method 1:
    You can perform a clean boot, and then try to install the update and check.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

    Method 2:
    Try to manually download and check.
    Update cumulative security for Internet Explorer 8 in Windows 7 (KB2675157)
    Also check the link for more details.
    MS12-023: for Internet Explorer Cumulative security update: 10 April 2012
    http://support.Microsoft.com/kb/2675157

    Method 3:
    If the problem persists you can try the procedure described in the supplied knowledge base article and check.
    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    http://support.Microsoft.com/kb/2509997
    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
    WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.
  • After the repair system that my computer does not detect wireless/Wired internet connection

    Brand: Gateway Model: MD7818u

    I have big problems with my computer so I did a system repair, wipe all my computer and assigning supposedly to the original computer

    Parameters. However a few things did not get the update/install and now I have absolutely no access to the internet at all. Before, I was able to use directly and wireless
    to connect cable and now it tells me the drivers are not updated and I need to update manually or through the internet. I found the drivers online to this
    website "http://support.gateway.com/product/?cmpid=topnav" which is the gateway support Web site. However, if you look there are several drivers for the different
    systems and I don't know how to say to which of the drivers is the right one for my computer. Will one of these work or what I have to understand that I need
     
    more precisely and if yes is there a way I can understand this? I'm still all original manuals and box it came but I don't know where to look if she is in any
    individuals. Thank you!

    Hello

    You will need to ask which are the right drivers for your machine.

    We do not get a list of drivers to this Web site; only to put in the model number of product to continue.

    You must do this yourself.

    See you soon.

Maybe you are looking for